At this present time our store location is open by appointment only.

Mounting Depth

Subwoofer and Speaker Drivers Searchable by Driver Mounting Depth

Subwoofer and Speaker Drivers Searchable by Driver Mounting Depth

331 products

  • JL Audio C1-650 : 6.5" Component Speakers - 50W RMS JL Audio C1-650 : 6.5" Component Speaker crossover.

    JL Audio C1-650 : 6.5" Component Speakers, 50W RMS

    6 Available for pickup

    C1-Series 6.5-Inch 50-Watt Component Speaker System C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles. To facilitate fit, multi-application adaptor rings are included for the C1-650 woofers, allowing easy, drop-in installation in vehicles equipped with oversized 6.5-inch and 6.75-inch speaker openings. Without the ring, the woofers will also fit into many "6-inch" speaker locations as well. Surface and flush mounts are included with C1 tweeters for maximum installation versatility. C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-650 is a proprietary, stamped, steel 6.50-inch (165 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control the voice coil's motion. Tinsel leads are carefully routed and attached to the spiders to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers. Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. An in-line, outboard 2nd order high-pass filter, with Advanced Tweeter Protection Circuitry, is included to further enhance smoothness and improve power handling. When it comes to value, C1 is the real deal! Sold as a pair. Grilles not available. General Specifications Continuous Power Handling (RMS) 50 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 10 - 75 W / Ch. System Efficiency 91.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 59 Hz - 22 KHz ± 3 dB JL Audio C1-650 Manual

    6 Available for pickup

    $159.99

  • JL Audio C1-690 : 6x9" Component Speakers - 60W RMS JL Audio C1-690 : 6x9" Component Speaker crossover.

    JL Audio C1-690 : 6x9" Component Speakers, 60W RMS

    2 Available for pickup

    C1-Series 6x9-Inch 60-Watt Component Speaker System C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles. To facilitate fit, spacer/adaptor rings are included allowing the C1-690 woofers to be installed in bottom-mount applications. Surface and flush mounts are included with C1 tweeters for maximum installation versatility. C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-690 is a proprietary, stamped, steel 6 x 9-inch (150 x 230 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers. Equipped with a true, edge-driven, 1-inch aluminum dome tweeter, the C1-690 stands further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. An in-line, outboard 2nd order high-pass filter, with Advanced Tweeter Protection Circuitry, is included to further enhance smoothness and improve power handling. When it comes to value, C1 is the real deal! Sold as a pair. Grilles not available. General Specifications Continuous Power Handling (RMS) 60 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 10 - 100 W / Ch. System Efficiency 89.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 39 Hz - 22 KHz ± 3 dB JL Audio C1-690 Manual

    2 Available for pickup

    $189.99

  • JL Audio C1-650x : 6.5" Coaxial Speakers - 50W RMS JL Audio C1-650x : 6.5" Coaxial Speakers - 50W RMS, front side.

    JL Audio C1-650x : 6.5" Coaxial Speakers, 50W RMS

    Pre-Order Today!

    C1-Series 6.5-Inch 50-Watt Coaxial Speaker System C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles. To facilitate fit, multi-application adaptor rings are included with the C1-650x allowing easy, drop-in installation in vehicles equipped with oversized 6.5-inch and 6.75-inch speaker openings. Without the ring, the speaker will fit into many "6-inch" speaker locations as well. C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-650x is a proprietary, stamped, steel 6.50-inch (165 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control the voice coil's motion. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers. Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling. When it comes to value, C1 is the real deal! Sold as a pair. Grilles not available. General Specifications Continuous Power Handling (RMS) 50 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 10 - 75 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 48 Hz - 24 KHz ± 3 dB JL Audio C1-650x Manual

    Pre-Order Today!

    $129.99

  • Kicker 47KSC6504 : 6-1/2-Inch Coaxial Speaker Drivers, 100-Watt RMS, top side. Kicker 47KSC6504 : 6-1/2-Inch Coaxial Speaker Drivers, 100-Watt RMS, shown with grille.

    Kicker 47KSC6504 : 100W 6.5" Coaxial Speakers

    3 Available for pickup

    6-1/2-Inch Coaxial Speaker Drivers, 100-Watt RMS The Kicker KS series six-and-a-half-inch coaxial speakers come with three custom bracketing options, built specifically to fit in today’s GM, Chrysler, Subaru, Toyota and Jeep factory speaker locations. KS series speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. They work best with 15 to 100 watts of recommended power. High power handling Tough rubber surrounds Thin-mount design easily fits behind factory grilles Brackets for select GM/Chrysler/Subaru/Jeep and Toyota included Specifications Speaker Design 2-Way Woofer [in, mm] 6-1/2, 160 Tweeter [in, mm] ¾, 20 Rated Impedance [Ω] 4 Recommended Amplifier Power [Watts RMS] 15-100 Sensitivity [1W, 1m] 90 Frequency Response [Hz] 43-21k Mounting Hole Diameter [in, mm] 4-13/16, 123 Top Mount Depth [in, mm] 1-13/16, 46 Bottom Mount Depth [in,mm] 2-3/16, 54 Tweeter Protrusion [in,mm] 5/16, 8 Grilles Yes Tweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber Kicker KS Series Coaxial Speaker Manual

    3 Available for pickup

    $129.99

  • Kicker 47KSC504 : 5-1/4-Inch Coaxial Speaker Drivers, 75-Watt RMS. Kicker 47KSC504 : 5-1/4-Inch Coaxial Speaker Drivers, 75-Watt RMS, front side view.

    Kicker 47KSC504 : 75W 5.25" Coaxial Speakers

    2 Available for pickup

    5-1/4-Inch Coaxial Speaker Drivers, 75-Watt RMS The Kicker KS series five-and-a-quarter-inch coaxial speakers come with three custom bracketing options, built specifically to fit in today’s GM, Chrysler, Subaru, Toyota and Jeep factory speaker locations. KS series speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. They work best with 15 to 75 watts of recommended power. High power handling Tough rubber surrounds Thin-mount design easily fits behind factory grilles Brackets for select GM/Chrysler/Subaru/Jeep and Toyota included Specifications Speaker Design 2-Way Woofer [in, mm] 5-1/4, 130 Tweeter [in, mm] ¾, 20 Rated Impedance [Ω] 4 Recommended Amplifier Power [Watts RMS] 15-75 Sensitivity [1W, 1m] 90 Frequency Response [Hz] 45-21k Mounting Hole Diameter [in, mm] 4-1/2, 115 Top Mount Depth [in, mm] 1-3/4, 45 Bottom Mount Depth [in,mm] 2, 52 Tweeter Protrusion [in,mm] 1/4, 6 Grilles Yes Tweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber Kicker KS Series Coaxial Speaker Manual

    2 Available for pickup

    $129.99

  • Kicker 47KSC6804 : Six-by-Eight-Inch Coaxial Speaker Drivers, 75-Watt RMS, top side. Kicker 47KSC6804 : Six-by-Eight-Inch Coaxial Speaker Drivers, 75-Watt RMS

    Kicker 47KSC6804 : 6x8" 75W Coaxial Speakers

    3 Available for pickup

    Six-by-Eight-Inch Coaxial Speaker Drivers, 75-Watt RMS The Kicker KS series six-by-8-inch coaxial speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. They work best with 15 to 75 watts of recommended power. High power handling Tough rubber surrounds Thin-mount design easily fits behind factory grilles Brackets for select GM/Chrysler/Subaru/Jeep and Toyota included Specifications Speaker Design 2-Way Woofer [in, mm] 6 x 8, 160 x 200 Tweeter [in, mm] ¾, 20 Rated Impedance [Ω] 4 Recommended Amplifier Power [Watts RMS] 15-75 Sensitivity [1W, 1m] 90 Frequency Response [Hz] 45-21k Mounting Hole Diameter [in, mm] 5 x 7-3/16, 127 x 182 Top Mount Depth [in, mm] 2-1/4, 58 Bottom Mount Depth [in,mm] 2-5/8, 67 Tweeter Protrusion [in,mm] 1/16, 2 Grilles No Tweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber Kicker KS Series Coaxial Speaker Manual

    3 Available for pickup

    $129.99

  • 6.5" Coaxial Speakers, 100W : Kicker 46CSC654 6.5" Coaxial Speakers, 100W : Kicker 46CSC654 shown without grille.

    Kicker 46CSC654 : 100W 6.5" Coaxial Speakers

    3 Available for pickup

    100-Watt 6.5-Inch Coaxial Speakers, 4-Ohm These CS series 6.5" coaxial speakers by Kicker are a significant upgrade in your sound. A stamped-steel speaker driver chassis supports a rigid polypropylene cone and UV-treated foam surrounds that stand up to heat and direct sunlight. These 100W coaxial's have neodymium tweeter magnets allow for increased volume in high frequencies. These Kicker CS series 6 and a 1/2" speakers work best with 100 watts of recommended power. Specifications Speaker Design 2 - way Woofer Size | in [mm] 6 1/2 [160] Tweeter Size | in [mm] 1/2 [13] DC Resistance | ohm 3.3 Peak Power | Watts 300 Continuous Power | Watts, RMS 100 Sensitivity [SPLo] | dB @ 1W, 1m 90 Effective Frequency Range | Hz 40-20k Mounting Hole Diameter | in [mm] 4 13/16 [123] Top Mount Depth | in [mm] 3/8 [9] Bottom Mount Depth | in [mm] 1 11/16 [43] Tweeter Protrusion | in [mm] 0 Grilles Yes Tweeter Magnet Material Neodymium Tweeter Dome Material PEI [polyether imide] Tweeter Design Balanced dome Woofer Cone Material Polypropylene Woofer Surround Material Polyester foam Kicker CS Series Coaxial Speaker Manual

    3 Available for pickup

    $89.99

  • Sale -$60.00 Kicker 47KSC69304 : Six-by-Nine-Inch 3-Way Coaxial Speaker Drivers, 150-Watt RMS Kicker 47KSC69304 : Six-by-Nine-Inch 3-Way Coaxial Speaker Drivers, 150-Watt RMS, top side view.

    Kicker 47KSC69304 : 6x9" 150W 3-Way Coaxial Speakers - Discontinued

    2 Available for pickup

    Six-by-Nine-Inch 3-Way Coaxial Speaker Drivers, 150-Watt RMS The Kicker KS series 6x9-inch 3-way coaxial speakers come with custom bracketing options, built specifically to fit in today’s GM, Chrysler, Subaru, Toyota and Jeep factory speaker locations. KS series speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. They work best with 15 to 150 watts of recommended power. High power handling Tough rubber surrounds Thin-mount design easily fits behind factory grilles Brackets for select GM/Chrysler/Subaru/Jeep and Toyota included Specifications Speaker Design 2-Way Woofer [in, mm] 6 x 9, 160 x 230 Midrange [in, mm] 1, 25 Tweeter [in, mm] 3/4, 20 Rated Impedance [Ω] 4 Recommended Amplifier Power [Watts RMS] 15-150 Sensitivity [1W, 1m] 92 Frequency Response [Hz] 30-21k Mounting Hole Diameter [in, mm] 5-11/16 x 8-7/16, 144 x 215 Top Mount Depth [in, mm] 3-1/8, 80 Bottom Mount Depth [in,mm] 3-5/8, 92 Tweeter Protrusion [in,mm] 3/16, 5 Grilles Yes Tweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber Kicker KS Series Coaxial Speaker Manual

    2 Available for pickup

    $189.99$129.99

  • JL Audio C3-650 : 6.5" Convertible Component Speakers - 75W RMS JL Audio C3-650 : 6.5" Convertible Component Speaker.

    JL Audio C3-650 : 6.5" Convertible Component Speakers, 75W RMS

    Pre-Order Today!

    C3-Series 6.5-Inch 75-Watt Convertible Component Speaker System There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application. The C3-650 system features 6.5-inch (165 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures. C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations! Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Powerful Sold as a pair. General Specifications Continuous Power Handling (RMS) 75 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 90.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 48 Hz - 25 KHz ± 3 dB JL Audio C3-650 Manual

    Pre-Order Today!

    $549.99

  • 6x9" 3-Way Coaxial Speakers, 150W : Kicker 46CSC6934 6x9" 3-Way Coaxial Speakers, 150W : Kicker 46CSC6934 shown with no grille.

    Kicker 46CSC6934 : 6x9" 3-Way Coaxial Speakers, 150W

    Pre-Order Today!

    150-Watt 6x9-Inch Coaxial Speakers, 4-Ohm These CS series 6x9" coaxial speakers by Kicker are a significant upgrade in your sound. A stamped-steel speaker driver chassis supports a rigid polypropylene cone and UV-treated foam surrounds that stand up to heat and direct sunlight. These 150W coaxial's have neodymium tweeter magnets allow for increased volume in high frequencies. These Kicker CS series 6 by 9" speakers work best with 150 watts of recommended power. Specifications Speaker Design 3 - way Woofer Size | in [mm] 6x9 [160x230] Mid Size | in [mm] 2 [50] Tweeter Size | in [mm] 1/2 [13] DC Resistance | ohm 3.5 Peak Power | Watts 450 Continuous Power | Watts, RMS 150 Sensitivity [SPLo] | dB @ 1W, 1m 92 Effective Frequency Range | Hz 30-20k Mounting Hole Diameter | in [mm] 5 5/8 x 8 7/16 [143x215] Top Mount Depth | in [mm] 7/16 [12] Bottom Mount Depth | in [mm] 3 3/16 [81] Tweeter Protrusion | in [mm] 1/16 [1] Grilles Yes Tweeter Magnet Material Electric Crystal Motor Tweeter Dome Material PEI [polyether imide] Tweeter Design Balanced dome Woofer Cone Material Polypropylene Woofer Surround Material Polyester foam Kicker CS Series Coaxial Speaker Manual

    Pre-Order Today!

    $129.99

  • Alpine S-S65 : 6.5" 80W RMS Coaxial Speakers

    Alpine S-S65 : 6.5" 80W RMS Coaxial Speakers

    Pre-Order Today!

    Alpine 6-1/2-Inch Coaxial 2-Way Speakers, 80-Watt RMS The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. Alpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection. Specifications 80W RMS/240W Peak Nominal Impedance 4Ω Frequency Response: 70-22kHz 1” Silk Dome Tweeter CFRP (Carbon Fiber Reinforced Plastic) Cone H.A.M.R. Surround CustomStamped Steel Frame 35mm voice coil Optional grille sold separately (KTE-S65G)

    Pre-Order Today!

    $119.99

  • Sale -$90.00Last One! Alpine S-S69C : 6x9" 85W RMS Component Speakers

    Alpine S-S69C : 6x9" 85W RMS Component Speakers 1/2 Box - Discontinued

    1 Available for pickup

    Alpine 6X9-Inch Component 2-Way Speakers, 85-Watt RMS The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. Specifications 85W RMS/260W Peak Nominal Impedance 4Ω Frequency Response: 65-22kHz 1” Silk Dome Tweeter CFRP (Carbon Fiber Reinforced Plastic) Cone H.A.M.R. Surround  CustomStamped Steel Frame 35mm voice coil Optional grille sold separately (KTE-S69G)

    1 Available for pickup

    $179.99$89.99

  • Alpine S2-S65C : 6.5" 80W RMS Component Speakers Alpine S2-S65C : 6.5" 80W RMS Component Speakers, woofer top side.

    Alpine S2-S65C : 6.5" 80W RMS Component Speakers

    2 Available for pickup

    Alpine 6-1/2-Inch Component 2-Way Speakers, 80-Watt RMS Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S65C 6.5” Component Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra- High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers resulting in a more accurate and natural sound at an entry- level price point. Crafted with a unique combination of Poly Propylene, Glass Fiber, and Mica Cone materials, the S2-S65 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience. Alpine-exclusive High Amplitude Multi- Roll (HAMR) surround technology is integrated into the speaker design which allows for maximum cone movement, delivering powerful and accurate bass notes. Engineered for versatility, these speakers offer seamless OEM fitment and simplified installation. With in-line crossovers, you can achieve optimal sound separation and precise tuning. The adjustable tweeters feature a flush mount housing that is removable allowing for installations in small OEM tweeter locations. The S-Series S2-S65 is compatible with the KTE-S65G Speaker Grille (sold separately). This sleek and stylish grille will not only add a visual upgrade to your speakers but also provide protection against any damage. Specifications Hi-Res Audio Certified (Up to 40kHz) Poly Propylene, Glass Fiber, and Mica Cone Material Lightweight Design with High Output and Low Distortion High-Amplitude Multi-Roll (H.A.M.R.) Surround   Included 1” Adjustable Tweeters with Threaded Removable Housing (Component) OEM Fitment with In-Line Crossovers Compatible with KTE-S65G Speaker Grille (sold separately) Woofer Size: 6.5”  Tweeter Size: 1” (Component) Power Handling: 80W RMS / 240W Peak Frequency Response: 70Hz - 40kHz (Hi-Res) Sensitivity: 88dB

    2 Available for pickup

    $149.99

  • Kicker 47KSS6904 : 6x9-Inch 125-Watt Component or Coaxial Mountable Speaker System. Kicker 47KSS6904 : 6x9-Inch 125-Watt Component or Coaxial Mountable Speaker System contents.

    Kicker 47KSS6904 : 125W 6x9" Convertible Component Speakers

    2 Available for pickup

    6x9-Inch 125-Watt Component or Coaxial Mountable Speaker System Kicker KS-Series door-speakers let you play at concert-like volume while pleasing even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and bass, while high-quality silk-dome tweeters deliver natural, detailed highs. These 6x9" Kicker speakers component system with separate tweeters, or convert them to a coaxial system. The woofers’ removable bullet-style phase plug is replaced with a special adapter, allowing the 25 millimeter, silk-dome tweeters to rotate and tilt. You get more system design options and superior off-axis performance. They work best with 15 to 125 watts of recommended power. See below for more details. High power handling Silk-dome tweeters for a smooth sound Polypropylene woofer and tough rubber surrounds Thin-mount design easily fits behind factory grilles Four tweeter mounting options Articulating tweeter pod included Smaller crossover makes mounting even easier Grilles included Specifications Woofer [in, mm] 6x9, 160x230 Tweeter [in,mm] 1, 25 Dome Material Silk Rated Impedance [Ω] 4 Recommended Amplifier Power [Watts RMS] 15-150 Sensitivity [1W, 1m] 92 Frequency Response [Hz] 35-21k Woofer Mounting Hole Diameter [in, mm] 5-5⁄8x8-7⁄16, 143x215 Woofer Bottom Mount Depth [in, mm] 2-15⁄16, 75 Flush Mount Tweeter Hole Diameter [in,mm] 1-¾, 45 Flush Mount Tweeter Depth [in,mm] 11⁄16 , 17 High Pass [dB], at Frequency [Hz] 12, 4,000 Low Pass [dB], at Frequency [Hz] none High Frequency Output Attenuation [dB] 0, 4.5, 9 Kicker KS Series Component Speaker Manual

    2 Available for pickup

    $249.99

  • Kicker 47KSS6504 : 6.5-Inch 125-Watt Component or Coaxial Mountable Speaker System. Kicker 47KSS6504 : 6.5-Inch 125-Watt Component or Coaxial Mountable Speaker System contents.

    Kicker 47KSS6504 : 125W 6.5" Convertible Component Speakers

    2 Available for pickup

    6.5-Inch 125-Watt Component or Coaxial Mountable Speaker System Kicker KS-Series door-speakers let you play at concert-like volume while pleasing even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and bass, while high-quality silk-dome tweeters deliver natural, detailed highs. These 6.5" Kicker speakers component system with separate tweeters, or convert them to a coaxial system. The woofers’ removable bullet-style phase plug is replaced with a special adapter, allowing the 25 millimeter, silk-dome tweeters to rotate and tilt. You get more system design options and superior off-axis performance. They work best with 15 to 125 watts of recommended power. See below for more details. High power handling Silk-dome tweeters for a smooth sound Polypropylene woofer and tough rubber surrounds Thin-mount design easily fits behind factory grilles Four tweeter mounting options Articulating tweeter pod included Smaller crossover makes mounting even easier Grilles included Specifications Woofer [in, mm] 6-½, 160 Tweeter [in,mm] 1, 25 Dome Material Silk Rated Impedance [Ω] 4 Recommended Amplifier Power [Watts RMS] 15-125 Sensitivity [1W, 1m] 90 Frequency Response [Hz] 35-21k Woofer Mounting Hole Diameter [in, mm] 4-13⁄16 , 123 Woofer Bottom Mount Depth [in, mm] 1-13⁄16 , 46 Flush Mount Tweeter Hole Diameter [in,mm] 1-¾, 45 Flush Mount Tweeter Depth [in,mm] 11⁄16 , 17 High Pass [dB], at Frequency [Hz] 12, 4,000 Low Pass [dB], at Frequency [Hz] none High Frequency Output Attenuation [dB] 0, 4.5, 9 Kicker KS Series Component Speaker Manual

    2 Available for pickup

    $249.99

  • Polk Audio MM1042SVC : 10" 400W Subwoofer Driver, 4Ω Single Voice Coil Polk Audio MM1042SVC : 10" 400W Subwoofer Driver, bottom side.

    Polk Audio MM1042SVC : 10" 400W Subwoofer Driver, 4Ω Single Voice Coil

    Pre-Order Today!

    MM-Series 400-Watt RMS 10-Inch Subwoofer Driver, 4-Ohm SVC The fiberglass-reinforced ABS basket resists flexing during heavy excursion, so your sub hits hard without distorting. Ultra-Marine certification and an IP56 rating. Specifications 10" 4-ohm subwoofer Titanium-plated composite cone Butyl rubber surround Fiberglass-reinforced ABS basket IP56 rating Power handling: 400W RMS Peak power handling: 1200W Frequency response: 28-2000Hz Sensitivity: 86dB @ 1W/1M Top mounting depth: 4.35" Cutout diameter: 9.1" Grille not included Warranty: 1 year Polk Audio MM1 Subwoofer Manual

    Pre-Order Today!

    $119.99

  • Kicker 48CWRT67 : 150W 6.75" Thin Subwoofer Driver, 1Ω or 2Ω Dual Voice Coil Kicker 48CWRT67 : 150W 6.75" Thin Subwoofer Driver, 1Ω or 2Ω Dual Voice Coil, left side.

    Kicker 48CWRT67 : 150W 6.75" Thin Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil

    Pre-Order Today!

    6.75-Inch 150-Watt Thin Subwoofer Driver, 1-Ohm or 2-Ohm DVC The CompRT 6.75" thin subwoofer by Kicker is a weather resistant thin sub with a 1Ω or 2Ω dual voice coil design. This thin 6.75 inch sub magnet structure delivers 150W RMS of power with a chassis mounting depth of 2 3/4". The Kicker designed UniPlate™ back plate and solid pole piece serve as a single heat-absorbing unit to keep this 6.75" CompRT thin subwoofer driver nice and cool.The CompRT 6.75-Inch subwoofer works best with a sealed or ported enclosure and 150 watts of recommended power. Specifications SIZE [in, cm]: 6 13/16, 17.3 IMPEDANCE [Ohms]: 2 or 4 DVC Recommended Amplifier Power (watts RMS) 150 Peak Power (watts, per ANSI/CTA-2031-A) 300 SENSITIVITY [dB 1w/1m]: 82.6 MOUNTING DEPTH [in, cm]: 2 3/4, 7 MOUNTING DIAMETER [in, cm]: 5 5/8, 14.3 MIN SEALED BOX VOL [cu. ft, L]: 0.18, 5.1 MAX SEALED BOX VOL [cu. ft, L]: 0.75, 21.24 Kicker CompRT Subwoofer Manual

    Pre-Order Today!

    $119.99

  • Sale -$5.00 Kicker 44KSC3504 : 50W 3.5" Coaxial Speakers Kicker 44KSC3504 : 50W 3.5" Coaxial Speakers side view.

    Kicker 44KSC3504 : 50W 3.5" Coaxial Speakers - (HALF BOX, 1 SPEAKER!!)

    Pre-Order Today!

    3.5-Inch 50-Watt Coaxial Speaker System The KSC 3 ½ inch 2-way coaxial speakers by Kicker are built for awesome sound with silk dome tweeters polypropylene woofer and tough rubber surrounds. These 3.5" automotive door speakers are best suited with up to 50W of amplified RMS power. Specifications Speaker Design 2-Way Woofer [in, mm] 3 ½, 89 Mid [in, mm] Not Applicable Tweeter [in,mm] ½, 13 Rated Impedance [Ω] 4 Peak Power Handling [Watts] 100 Continuous Power Handling [Watts RMS] 50 Sensitivity [1W, 1m] 88 Frequency Response [Hz] 80-20k Mounting Hole Diameter [in, mm] 3 1⁄16, 78 Top Mount Depth [in, mm] 1 ⅝, 42 Bottom Mount Depth [in, mm] 1 ⅞, 49 Tweeter Protrusion [in,mm] 3⁄16, 4 Grilles no Tweeter Magnet Material Neodymium Tweeter Dome Material Silk Tweeter Design Balanced Dome Woofer Cone Material Polypropylene Woofer Surround Material Rubber Kicker KSC Coaxial Speaker Manual

    Pre-Order Today!

    $24.99$19.99

  • Alpine S2-S65 : 6.5" 80W RMS Coaxial Speakers Alpine S2-S65 : 6.5" 80W RMS Coaxial Speakers, front side.

    Alpine S2-S65 : 6.5" 80W RMS Coaxial Speakers

    3 Available for pickup

    Alpine 6-1/2-Inch Coaxial 2-Way Speakers, 80-Watt RMS Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S65 6.5” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers resulting in a more accurate and natural sound at an entry-level price point.  Crafted with a unique combination of Poly Propylene, Glass Fiber, and Mica Cone materials, the S2-S65 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience. Alpine-exclusive High Amplitude Multi- Roll (HAMR) surround technology is integrated into the speaker design which allows for maximum cone movement, delivering powerful and accurate bass notes. The S-Series S2-S65 is compatible with the KTE-S65G Speaker Grille (sold separately). This sleek and stylish grille will not only add a visual upgrade to your speakers but also provide protection against any damage. Specifications Hi-Res Audio Certified (Up to 40kHz) Poly Propylene, Glass Fiber, and Mica Cone Material Lightweight Design with High Output and Low Distortion High-Amplitude Multi-Roll (H.A.M.R.) Surround   Integrated 1” Tweeters (Coaxial) Compatible with KTE-S65G Speaker Grille (sold separately) Woofer Size: 6.5”  Tweeter Size: 1” (Coaxial) Power Handling: 80W RMS / 240W Peak Frequency Response: 70Hz - 40kHz (Hi-Res) Sensitivity: 88dB

    3 Available for pickup

    $129.99

  • Alpine R2-S653 : 6.5" PRO 3-Way Component Door Speaker System, 100W RMS Alpine R2-S653 : 6.5" PRO 3-Way Component Door Speaker System, woofer mid and tweeter.

    Alpine R2-S653 : 6.5" PRO 3-Way Component Door Speaker System, 100W RMS

    Pre-Order Today!

    Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status systems, the Next-Generation R-Series Speakers are Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This ultra-wide bandwidth brings music even closer to the original source while the classic R-Series design maintains the “loud and fun” performance quality that long-time fans have come to enjoy. The Next-Generation R-Series speakers now come in upgraded 'Pro' models in addition to the standard model lineup. The pro models utilize a highly rigid, die-cast aluminum basket that eliminates flexing and resonance during playback to ensure the highest quality sound performance. The new lightweight and rigid glass fiber-reinforced cone material allows for extreme movement and low distortion which results in an incredibly accurate and clean sound during playback. The Next-Generation R-Series speakers utilize a ferrite magnet, different from the neodymium from previous generations, and a larger motor structure that contributes to more mid-bass during the playback. Despite the larger motor structure, the speakers still maintain the same depth for easy installation. Continuing with the Next-Generation R-Series speaker line is Alpine-exclusive High Amplitude Multi-Roll (HAMR) surround technology that increased excursions while maintaining linearity for more accurate music reproduction. Magnesium, hard-dome tweeters contribute to the “loud and fun” R-series sound signature and feature a swivel- mount design for optimal listening positioning and threaded removable housing for flexible factory applications. The Next-Generation R-Series speaker line offers two pathways for performance: the “Pro” and “Standard” models. The R2-S65C is a standard component speaker set that includes a 6.5” Mid-Range and 1” Tweeter with a flexible in-line crossover network that simplifies installation. Sold as a pair. Features Hi-Res Audio Certified Glass Fiber Reinforced Cone  Die-Cast Aluminum Basket  Ferrite Magnet Structure  High-Amplitude Multi-Roll (H.A.M.R.) Surround  2 Premium-Grade Full Passive Performance Crossover Networks   Magnesium Hard-Dome Tweeters with Swivel Mount Design and Threaded Removable Housing  Protective Open Mesh Grille Pair Included Specifications 6.5” Mid-Bass with 1” Tweeter Frequency Response: 65Hz -40kHz  Power Handling: 100W RMS / 300W Peak

    Pre-Order Today!

    $599.99

  • Alpine R2-S65C : 6.5" Component Door Speaker System, 100W RMS Alpine R2-S65C : 6.5" Component Door Speaker System, woofer and tweeter.

    Alpine R2-S65C : 6.5" Component Door Speaker System, 100W RMS

    Pre-Order Today!

    Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status systems, the Next-Generation R-Series Speakers are Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This ultra-wide bandwidth brings music even closer to the original source while the classic R-Series design maintains the “loud and fun” performance quality that long-time fans have come to enjoy. The new lightweight and rigid glass fiber-reinforced cone material allows for extreme movement and low distortion which results in an incredibly accurate and clean sound during playback. The Next-Generation R-Series speakers utilize a ferrite magnet, different from the neodymium from previous generations, and a larger motor structure that contributes to more mid-bass during the playback. Despite the larger motor structure, the speakers still maintain the same depth for easy installation. Continuing with the Next-Generation R-Series speaker line is Alpine-exclusive High Amplitude Multi-Roll (HAMR) surround technology that increased excursions while maintaining linearity for more accurate music reproduction. Magnesium, hard-dome tweeters contribute to the “loud and fun” R-series sound signature and feature a swivel- mount design for optimal listening positioning and threaded removable housing for flexible factory applications. The Next-Generation R-Series speaker line offers two pathways for performance: the “Pro” and “Standard” models. The R2-S65C is a standard component speaker set that includes a 6.5” Mid-Range and 1” Tweeter with a flexible in-line crossover network that simplifies installation. Sold as a pair. Features Hi-Res Audio Certified Glass Fiber Reinforced Cone  Ferrite Magnet Structure  High-Amplitude Multi-Roll (H.A.M.R.) Surround  2 Premium-Grade In-Line Crossover Networks   Magnesium Hard-Dome Tweeters with Swivel Mount Design and Threaded Removable Housing  Protective Open Mesh Grille Pair Included Specifications 6.5” Mid-Bass with 1” Tweeter Frequency Response: 65Hz -40kHz  Power Handling: 100W RMS / 300W Peak

    Pre-Order Today!

    $349.99

  • JL Audio SB-F-F150SPRCB/10TW3 : 10" Thin 400W Subwoofer Enclosure, cutaway view. JL Audio SB-F-F150SPRCB/10TW3 : 10" Thin 400W Subwoofer Enclosure, shown installed.

    JL Audio SB-F-F150SPRCB/10TW3 : 10" Thin 400W Subwoofer Enclosure @ 2Ω, 2015-UP F-150 (SuperCab)

    Pre-Order Today!

    Single 400-Watt 10-Inch Stealthbox Subwoofer Enclosure for Select 2015-UP Ford F-150 SuperCab & 2017-UP SuperDuty SuperCab Trucks Benefitting from JL's revolutionary thin-woofer technology, this Stealthbox® for F-150 SuperCab and SuperDuty SuperCab trucks is designed to install neatly under the rear seat with no intrusion on cab space. Featuring an all-fiberglass, sealed enclosure design, JL's Stealthbox® houses a 10-inch TW3 thin-line subwoofer and fills your truck with loads of deep bass output. Seat folding and reclining are unaffected, and JL even incorporated a recess on the Stealthbox’s top for mounting an amplifier, if desired. The Hard Data: Contains one 10TW3-D4 subwoofer in a sealed enclosure. 400 watt power handling. Wired for 2 ohm mono. Installs under rear bench seat and requires removal of the storage divider panel. Stealthbox® includes a steel-mesh grille to protect the driver. Does not affect folding or reclining of seat. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-F-F150SPRCB/10TW3 Installation Manual

    Pre-Order Today!

    $999.99

  • JL Audio SB-GM-ESC/10W1v3/DG : Dual 10" 600W 2Ω Subwoofer Enclosure, 2007-2013 Chevy GMC Cadillac Medium SUV's with Power Liftgate JL Audio SB-GM-ESC/10W1v3/DG : Dual 10" 600W 2Ω Subwoofer Enclosure, shown installed.

    JL Audio SB-GM-ESC/10W1v3 : Dual 10" 600W 2Ω Subwoofer Enclosure, 2007-2013 Chevy, GMC, Cadillac, (Medium SUV's with Power Liftgate)

    Pre-Order Today!

    Dual 10-Inch 600-Watt Subwoofer-Enclosure for Select 2007-2013 Chevrolet and GMC Regular-Wheelbase SUV’s & Cadillac-Escalade with Power-Liftgate and Ebony-Interior The centerpiece of any serious audio upgrade is an outstanding subwoofer system. For GM's big SUV's, we now offer this powerful solution that fits all versions, including the luxurious Denali and Escalade models. Featuring a potent pair of 10-inch subwoofer drivers in a sealed enclosure, these rear-mounted Stealthbox® systems have the muscle to fill that big space with clean, powerful JL Audio bass performance. The clever design places the enclosure off the floor so that it doesn't take up any useful cargo or people space and the enclosure is positioned so that it will not affect the driver's visibility one bit. The only thing you will be giving up is that weak factory bass performance. Please note that specific versions are available for the regular and extended wheelbase versions of these vehicles! The Hard Data: Contains two 10W1v3-4 in a sealed enclosure. 600 watt power handling. Wired for 2 ohm mono. Installs on the driver side rear window ledge. Steel mesh grilles are included to protect the subwoofer drivers. Will not fit extended wheelbase Chevrolet & GMC SUV's. Will not fit models without Power Liftgate option. Installation requires relocation of jack. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-GM-ESC/10W1v3/DG Installation Manual

    Pre-Order Today!

    $1,299.99

  • Last One! Polk Audio MM1242SVC : 12" 420W Subwoofer Driver, 4Ω Single Voice Coil

    Polk Audio MM1242SVC : 12" 420W Subwoofer Driver, 4Ω Single Voice Coil

    1 Available for pickup

    MM-Series 420-Watt RMS 12-Inch Subwoofer Driver, 4-Ohm SVC Specifications Qty Included : 1 Driver Enclosure Type : Ultra-Marine Certified Driver Complement: (1) 12" (30.48 cm) d (Round) - Subwoofer Shape : Round Diameter : 11.1" (28.19 cm) Full-Range Mounting Depth - Top Mount : 4.65" (11.81 cm) Full-Range Mounting Depth - Bottom Mount : 5.2" (13.21 cm) Total Frequency Response : 26 Hz → 200 Hz Nominal Impedance : 4 ohms Sensitivity (1 watt @ 1 meter) : 87 dB Continuous Power Handling : 420W Peak Power Handling : 1260W Drivers Warranty : 1 years Polk Audio MM1 Subwoofer Manual

    1 Available for pickup

    $129.99

  • JL Audio 12W1v3 : 12-Inch 300-Watt Subwoofer Driver, 2-Ohm or 4-Ohm SVC, front side view. 300W 12" Subwoofer Driver, 2Ω or 4Ω Single Voice Coil : JL Audio 12W1v3

    JL Audio 12W1v3 : 300W 12" Subwoofer Driver, 2Ω or 4Ω Single Voice Coil

    4 Available for pickup

    W1-Series 12-Inch 300-Watt Subwoofer Driver, 2-Ohm or 4-Ohm SVC The 12" W1v3 automotive subwoofer driver by JL Audio is a lightweight 12-inch driver with excellent performance capabilities at a moderate 300-Watts. The design of the chassis allows an average mounting depth with no pole-vent on the back side of the magnet so the rear of the motor structure can be placed directly against an enclosure boundary. This 12" subwoofer can reproduce sub-bass with shocking extension and quality. The JL Audio 12W1v3-2 and 12W1v3-4 subwoofers are best used with an amplifier in the 75W - 300W range and is optimized to operate in a compact 1.10 cu. ft. (31.5 l) sealed enclosure.  General Specifications Continuous Power Handling 300W RMS Recommended Amplifier Power 75W - 300W RMS Nominal Impedance 2Ω JL Audio 12W1v3 Manual

    4 Available for pickup

    $269.99

  • 300W 10" Subwoofer Driver, 2Ω or 4Ω Single Voice Coil : JL Audio 10W1v3 300W 10" Subwoofer Driver, 2Ω or 4Ω Single Voice Coil : JL Audio 10W1v3, side view.

    JL Audio 10W1v3 : 300W 10" Subwoofer Driver, 2Ω or 4Ω

    3 Available for pickup

    W1-Series 10-Inch 300-Watt Subwoofer Driver, 2-Ohm or 4-Ohm SVC The JL Audio 10" W1v3 subwoofer driver is a very suitable option when space is limited with smaller amplifiers. It features a low mounting depth of 4.6 inches and a compact motor structure that allows it to comfortably fit in tight mounting locations. There is no pole vent on the rear of the subwoofer which allows the motor structure to be placed directly against an enclosure boundary.  Excellent excursion capability and linearity allow the 10W1v3 to reproduce sub-bass with shocking extension and quality. The JL Audio 10W1v3 is best used with an amplifier in the 75W - 300W RMS range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure. General Specifications Continuous Power Handling 300W RMS Recommended Amplifier Power 75W - 300W RMS Nominal Impedance 2Ω/4Ω JL Audio 10W1v3 Manual

    3 Available for pickup

    $249.99

  • Sale -$45.00 Alpine S-S69 : 6x9" 85W RMS Coaxial Speakers

    Alpine S-S69 : 6x9" 85W RMS Coaxial Speakers - Discontinued

    2 Available for pickup

    Alpine 6X9-Inch Coaxial 2-WAY Speakers, 85-Watt RMS The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. Alpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection. Specificatons 85W RMS/260W Peak Nominal Impedance 4Ω Frequency Response: 65-22kHz 1” Silk Dome Tweeter CFRP (Carbon Fiber Reinforced Plastic) Cone H.A.M.R. Surround CustomStamped Steel Frame 35mm voice coil Optional grille sold separately (KTE-S69G)

    2 Available for pickup

    $129.99$84.99

  • JL Audio C1-690tx : 6x9" Coaxial Speakers - 60W RMS 3-Way JL Audio C1-690tx : 6x9" Coaxial Speakers - 60W RMS 3-Way, front side.

    JL Audio C1-690tx : 6x9" Coaxial Speakers, 60W RMS 3-Way

    Pre-Order Today!

    C1-Series 6x9-Inch 60-Watt Coaxial Speaker System, 3-Way C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles. To facilitate fit, spacer adaptor rings are included allowing the C1-690tx to be installed in bottom-mount applications. C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-690tx is a proprietary, stamped, steel 6 x 9-inch (150 x 230 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers. Equipped with dual true, edge-driven, aluminum dome tweeters, the C1-690tx stands apart from others in its category with superior high-frequency clarity and separation. The design of each tweeter delivers inherently excellent off-axis response and high-frequency extension. Both high-frequency drivers also benefit from the damping of silk surround suspensions and Ferrofluid in the voice coil gaps, along with the superior strength of neodymium magnetics. A true, mixed order filter network is employed to further enhance smoothness and improve power handling. When it comes to value, C1 is the real deal! Sold as a pair. Grilles not available. General Specifications Continuous Power Handling (RMS) 60 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 10 - 100 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 36 Hz - 24 KHz ± 3 dB JL Audio C1-690tx Manual

    Pre-Order Today!

    $179.99

  • JL Audio C2-525cw : 5.25" Component Woofer - 60W RMS

    JL Audio C2-525cw : 5.25" Component Woofer, 60W RMS

    Pre-Order Today!

    C2-Series 5.25-Inch 60-Watt Component Woofer, with Grille The C2-525cw is a 5.25-inch (130 mm) component woofer capable of accurate reproduction between 63 Hz and 8 kHz. It features a mineral-filled polypropylene cone and stamped steel basket. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. A grille is included, consisting of a black grille tray and a black steel mesh grille. Sonic character: Clean and Powerful Sold individually. General Specifications Continuous Power Handling (RMS) 60 W Peak Music Power 150 W Recommended Amplifier Power (RMS) 15 - 100 W / Ch. System Efficiency 89.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 63 Hz - 8 KHz ± 3 dB JL Audio C2-525 Manual

    Pre-Order Today!

    $149.99

  • JL Audio C2-650 : 6.5" Component Speakers - 60W RMS JL Audio C2-650 : 6.5" Component Speaker woofer.

    JL Audio C2-650 : 6.5" Component Speakers, 60W RMS

    2 Available for pickup

    C2-Series 6.5-Inch Component Speaker System The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and long linear excursion woofer designs. The C2-650 system features 6.5-inch (165 mm) component woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. The 6.5-inch (165 mm) format is a direct fit in many vehicles. Multiple mounting patterns are provided on the woofer frame for easy installation into most vehicles that accept a 6.5-inch (165 mm) speaker. The C2 component tweeters are built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. C2 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Three levels of tweeter attenuation are provided, as well as a tweeter protector. Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair. General Specifications Continuous Power Handling (RMS) 60 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 15 - 100 W / Ch. System Efficiency 91.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 59 Hz - 22 KHz ± 3 dB JL Audio C2-650 Manual

    2 Available for pickup

    $299.99

  • JL Audio C2-650x : 6.5" Coaxial Speakers - 60W RMS JL Audio C2-650x : 6.5" Coaxial Speaker front side.

    JL Audio C2-650x : 6.5" Coaxial Speakers, 60W RMS

    4 Available for pickup

    C2-Series 6.5-Inch 60-Watt Coaxial Speaker System The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs. The C2-650x system features 6.5-inch (165 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. The 6.5-inch (165 mm) format is a direct fit in many vehicles. Multiple mounting patterns are provided on the woofer frame for easy installation into most vehicles that accept a 6.5-inch (165 mm) speaker. Tweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles. Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair. General Specifications Continuous Power Handling (RMS) 60 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 15 - 100 W / Ch. System Efficiency 91 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 59 Hz - 22 KHz ± 3 dB JL Audio C2-650x Manual

    4 Available for pickup

    $249.99

  • JL Audio C2-600x : 6" Coaxial Speakers - 60W RMS JL Audio C2-600x : 6" Coaxial Speaker grilles.

    JL Audio C2-600x : 6" Coaxial Speakers, 60W RMS

    2 Available for pickup

    C2-Series 6-Inch 60-Watt Coaxial Speaker System The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs. The C2-600x system features 6-inch (150 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. The 6-inch (150 mm) format is a direct fit in many vehicles. Multiple mounting patterns are provided on the woofer frame for easy installation into most vehicles that accept a 6.5-inch (165 mm) speaker. Tweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles. Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair. General Specifications Continuous Power Handling (RMS) 60 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 15 - 100 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 59 Hz - 22 KHz ± 3 dB JL Audio C2-600x Manual

    2 Available for pickup

    $249.99

  • A-Trend A341-10CP : Single 10" Sealed Sub Box for F-Series Super Crew and Super Cab 2009-2018

    A-Trend A341-10CP : Single 10" Sealed Sub Box, 2009-2018 F-Series (SuperCrew and Super Cab)

    Pre-Order Today!

    Single 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2009-2018 Ford F-150 & 2017-2018 F-250, F-350 and F-450 SuperCrew and Super-Cab Pickups CLICK HERE TO VIEW SUBWOOFERS THAT FIT THIS BOX! Designed specifically for 2009-2018 Ford F150 Super Crew/Super Cab Will also work in 2017 - 2018 F250/350/450 Super Crew / Super Cab Premium Carpeted Finish 3/4" Hardwood MDF Glued and Braced construction CNC Grooved custom finish Rounded edges Silver spring loaded terminal cups Subwoofer mounting depth: 4.5" Box volume: 0.8 cubic feet (per chamber) Sub Cut Out: 9.125”, Width:26”, Height: 9”, Depth: 13.25” Specifications Configuration: Single Sealed Finish: Charcoal Carpeted Width:26.00" Height:4.63" Depth:13.25" Max Mounting Depth:4.50" Gross VolumePer Sub:1.37 Net Volume Per Sub:0.92

    Pre-Order Today!

    $154.99

  • A-Trend A201-12CP : Single 12" Sealed Sub Box for RAM Quad Cab 2002-2018 A-Trend A201-12CP : Single 12" Sealed Sub Box for RAM Quad Cab 2002-2018, specs.

    A-Trend A201-12CP : Single 12" Sealed Sub Box, 2002-2018 RAM (Quad Cab)

    Pre-Order Today!

    Single 12-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2002-2018 Ram Quad-Cab Pickups CLICK HERE TO VIEW SUBWOOFERS THAT FIT THIS BOX! Accu-Tuned 11” single sealed subwoofer enclosure designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers. Premium Carpet Finish OEM-Fit is designed and engineered specifically for the 2002-2018 Dodge Ram Quad Cab *2019 Legacy trucks to ensure an OEM fit without impeding the operation of the back seat. Soft Woven Polyfill Damping Material helps create a flatter frequency response, low bass extension, and simulates a larger net volume air space. Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with the second application of glue around all internal joints after final assembly. Dimensions Sub cut out: 9.125”, mounting depth:6”, height: 7.25”, width: 32.7”, depth: 13.25” May work with Legacy 2019 Vehicle Models  Specifications Configuration: Single Sealed Finish: Charcoal Carpeted Width:32.75" Height:7.25" Depth:13.25" Max Mounting Depth:6.00" Gross VolumePer Sub:0.63 Net Volume Per Sub:0.63

    Pre-Order Today!

    $144.99

  • Last One! A-Trend A201-10CP : Single 10" Sealed Sub Box for RAM Quad Cab 2002-2018 A-Trend A201-10CP : Single 10" Sealed Sub Box for RAM Quad Cab 2002-2018, top side.

    A-Trend A201-10CP : Single 10" Sealed Sub Box, 2002-2018 RAM (Quad Cab)

    1 Available for pickup

    Single 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2002-2018 Ram Quad-Cab Pickups CLICK HERE TO VIEW SUBWOOFERS THAT FIT THIS BOX! Accu-Tuned 10” single sealed subwoofer enclosure designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers. Premium Carpet Finish OEM-Fit is designed and engineered specifically for the 2002-2018 Dodge Ram Quad Cab *2019 Legacy trucks to ensure an OEM fit without impeding the operation of the back seat. Soft Woven Polyfill Damping Material helps create a flatter frequency response, low bass extension, and simulates a larger net volume air space. Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with the second application of glue around all internal joints after final assembly. Dimensions Sub cut out: 9.125”, mounting depth: 6”, height: 7.25”, width: 32.7”, depth: 13.25” May work with Legacy 2019 Vehicle Models Specifications Configuration: Single Sealed Finish: Charcoal Carpeted Width: 32.75" Height: 7.25" Depth:13.25" Max Mounting Depth: 6.00" Gross VolumePer Sub: 0.63 Net Volume Per Sub: 0.63

    1 Available for pickup

    $144.99

  • Sale -$40.00 A-Trend A151-12CP : Single 12" Sealed Sub Box, 1999-2007 Silverado Sierra Extended Cab A-Trend A151-12CP : Single 12" Sealed Sub Box, 1999-2007 Silverado Sierra Extended Cab, specs.

    A-Trend A151-12CP : Single 12" Sealed Sub Box, 1999-2007 Silverado Sierra (Extended Cab)

    Pre-Order Today!

    Single 12-Inch Sealed Carpeted Subwoofer-Enclosure for Select 1999-2007 Chevrolet-Silverado or GMC-Sierra Extended-Cab Pickups CLICK HERE TO VIEW SUBWOOFERS THAT FIT THIS BOX! Custom down fire fit under rear driver side seat. No modification required. Doesn't affect rear seat latching. Single 12" Carpeted Finish Subwoofer Enclosure Designed specifically for 1999-2007 Chevy Silverado and GMC Sierra Extended Cab Trucks Premium Carpeted Finish 3/4" Mounting Baffle Hardwood MDF construction Rounded edges Glued and Braced construction Subwoofer mounting depth: 7.25" Box volume: 0.93 cubic feet (per chamber) Specifications Width 24 Height 9.125 Depth 14.75 Mounting Depth 7.25 Gross Cubic Feet Per Side 0.93 Net Cubic Feet Per Side 0.93 Excursion 1.625

    Pre-Order Today!

    $144.99$104.99

  • Sale -$70.00Last One! A-Trend A142-10CP : Dual 10" Sealed Sub Box, 2007-2014 Silverado Sierra Extended Cab A-Trend A142-10CP : Dual 10" Sealed Sub Box, 2007-2014 Silverado Sierra Extended Cab, specs.

    A-Trend A142-10CP : Dual 10" Sealed Sub Box, 2007-2014 Silverado Sierra (Extended Cab)

    1 Available for pickup

    Dual 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2007-2014 Chevrolet-Silverado or GMC-Sierra Extended-Cab Trucks CLICK HERE TO VIEW SUBWOOFERS THAT FIT THIS BOX! Custom downfire fit under rear seat. Fits bench style, 60/40 style seats Designed specifically for 2007-2014 Chevy Silverado and GMC Sierra Extended Cab Trucks Dual 10" Subwoofer Enclosure Premium Carpet Finish 3/4" Mounting Baffle Hardwood MDF construction Rounded edges Glued and Braced construction Subwoofer mounting depth: 6.25" Box volume: 0.8 cubic feet (per chamber) Specifications Width 52.75 Height 6.875 Depth 11.875 Mounting Depth 6.25 Gross Cubic Feet Per Side 0.8 Net Cubic Feet Per Side 0.8 Excursion 3.625

    1 Available for pickup

    $249.99$179.99

  • JL Audio SB-J-JL4DPAS/10TW1-2 : 10" 300W 2Ω Thin Subwoofer Enclosure, 2018-UP Jeep Wrangler JL Unlimited Passenger Side JL Audio SB-J-JL4DPAS/10TW1-2 : 10" 300W 2Ω Thin Subwoofer Enclosure, shown installed.

    JL Audio SB-J-JL4DPAS/10TW1 : 10" 300W 2Ω or 4Ω Thin Subwoofer Enclosure, 2018-UP Jeep Wrangler JL Unlimited (Passenger Side)

    Pre-Order Today!

    10-Inch 300-Watt Thin Subwoofer-Enclosure for Select 2018-UP Jeep Wrangler-Unlimited, Passenger-Side Combining JL's advanced thin-line subwoofer technology with a form fitting enclosure design, these Stealthbox® systems deliver outstanding sub-bass performance in your 4-door Wrangler, without consuming excess cargo space. Constructed from 100% fiberglass, each Stealthbox® houses a 10TW1 thin-line subwoofer and mounts solidly above each rear wheel well. A matching trim panel and sturdy steel-mesh grille are included, so you can carry plenty of gear without worrying about damage. Separate driver and passenger side Stealthbox® models are available, each with 2 or 4 ohm drivers. The Hard Data: Contains one 10TW1 in a sealed enclosure with 300 watt power handling. Choose from 2 ohm or 4 ohm models, driver or passenger side. Each enclosure installs above one rear wheel well. Black steel mesh grille is included with each. If vehicle is factory-equipped with Premium Audio, passenger side Stealthbox® installation requires removal of OEM “subwoofer” and purchase of interior trim parts from Jeep®. Will not fit any "JK" Jeep® model or 2-Door "JL" models. Soft-top models: Stealthbox® installation does not interfere with normal top operation, except for the final position where the top mechanism is detached from the rails. Jeep Part #CFWLR-74-24 carpet needs to be ordered from jeep to remove the Factor Subwoofer. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-J-JL4DPAS/10TW1-2 Installation Manual

    Pre-Order Today!

    $999.99

  • Q-Power TW10S : 10" Subwoofer Box, Carpeted 5/8" MDF

    Q-Power TW10S : 10" Subwoofer Box, Carpeted 5/8" MDF

    Pre-Order Today!

    1 Single 10-Inch Sealed Truck Style Subwoofer Enclosure 5/8" MDF Premium Charcoal Colored Carpet  Universal Truck Application, Behind Seat Dimensions Air Space: 0.88 Cubic Feet  Mounting Depth: 5" Height: 15" Width: 20" Depth: 7.5"

    Pre-Order Today!

    $49.99

  • Q-Power HD112 : 12" Carpeted Subwoofer Box, left side. Q-Power HD112 : 12" Carpeted Subwoofer Box, right side.

    Q-Power HD112 : 12" Carpeted Subwoofer Box

    Pre-Order Today!

    Single 12-Inch Sealed Heavy Duty Subwoofer Box 1" MDF Face, 3/4" MDF for the rest Gold Tipped Spring Loaded Terminal Premium Charcoal Colored Carpet Dimensions Air Space: 1.2 Cubic Feet Height: 13.25" Width: 16" Depth: 13.25"

    Pre-Order Today!

    $69.99

  • Q-Power HD110 : 10" Carpeted Subwoofer Box, left side. Q-Power HD110 : 10" Carpeted Subwoofer Box, right side.

    Q-Power HD110 : 10" Carpeted Subwoofer Box

    Pre-Order Today!

    Single 10-Inch Sealed Heavy Duty Subwoofer Box 1" MDF Face, 3/4" MDF for the rest Gold Tipped Spring Loaded Terminal Premium Charcoal Colored Carpet Dimensions Air Space: 1.2 Cubic Feet Height: 13.25" Width: 16" Depth: 13.25"

    Pre-Order Today!

    $59.99

  • Sale -$40.00Last One! 300W 12" Subwoofer Driver, 4Ω Single or Dual Voice Coil : Kicker 44CWC 300W 12" Subwoofer Driver, 4Ω Single or Dual Voice Coil : Kicker 44CWC, side view.

    Kicker 44CWC : 300W 12" Subwoofer Driver, Dual Voice Coil - Discontinued

    1 Available for pickup

    12-Inch 300-Watt Subwoofer Driver, 4-Ohm SVC or 4-Ohm DVC This CompC 12" sub driver from Kicker has a thick stamped steel basket that holds an injection-molded polypropylene cone with stabilizing ribs in the surround. The 44CWCS124 and 44CWCD124 12-Inch subs are available in a 4Ω Single Voice or 4Ω Dual Voice coil design with spring loaded speaker terminals. These CompC drivers are rated for 300W RMS of amplified power. Specifications Size (IN.,CM) 12, 30 Impedance (OHMS) 4 SVC or 4 DVC Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 Sensitivity (dB 1w/1m) 88.3 Frequency Response (Hz) 27-500 Mounting Depth (in, cm) 5-3/8, 13.6 Mounting Cutout (in, cm) 11, 27.9 Min Sealed Box Vol (cu. ft, L) 1.25, 35.4 Max Sealed Box Vol (cu. ft, L) 3.5, 99.1 Min Vented Box Vol (cu. ft, L) 1.75, 49.6 Max Vented Box Vol (cu. ft, L) 2.25, 63.7 Kicker CompC Subwoofer Manual

    1 Available for pickup

    $119.99$79.99

  • 3.5" 50W Coaxial Speakers : Kicker 47KSC3504 3.5" 50W Coaxial Speakers : Kicker 47KSC3504 front side.

    Kicker 47KSC3504 : 3.5" 50W Coaxial Speakers

    2 Available for pickup

    3-1/2" Coaxial Speaker Drivers, 50-Watt RMS The Kicker KS series three-and-a-half-inch coaxial speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. They work best with 15 to 50 watts of recommended power. High power handling Tough rubber surrounds Thin-mount design easily fits behind factory grilles Specifications Speaker Design 2-Way Woofer [in, mm] 3-½, 89 Tweeter [in, mm] ½, 13 Rated Impedance [Ω] 4 Recommended Amplifier Power [Watts RMS] 15-50 Sensitivity [1W, 1m] 88 Frequency Response [Hz] 80-20k Mounting Hole Diameter [in, mm] 3-1⁄16, 78 Top Mount Depth [in, mm] 1-5⁄8, 41.5 Bottom Mount Depth [in,mm] 1-7⁄8, 49 Tweeter Protrusion [in,mm] 3/16, 4 Grilles No Tweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber Kicker KS Series Coaxial Speaker Manual

    2 Available for pickup

    $79.99

  • Last One! Alpine S-S10TW : Pair of 100W RMS Tweeters

    Alpine S-S10TW : Pair of 100W RMS Tweeters

    1 Available for pickup

    Alpine 1-Inch Type-S Silk Dome Tweeter Set, 100-Watts RMS The S-S10TW Tweeter’s motor structure was designed to reduce distortion and increase output at high volumes, so you can turn your music up and still experience crystal clear sound. Brighten up your sound stage without sounding overpowering or compromising sound quality. The silk dome design minimizes harsh highs and instead produces a warm and mellow tone. The S-S10TW includes a small, in-line crossover made of high-grade electrical components that seamlessly rolls off your midrange while also passively protecting your tweets from low frequency damage. The small size of the crossover also makes installation fast and convenient. Specifications Max RMS Power Capacity: 80W  Peak Power Capacity: 240W  Material: Silk  Magnet Type: Neodymium  Voice Coil Type: Copper Clad Aluminum  Crossover: Passive 12dB/Octave High-Pass Filter  Frequency Response: 1kHz-22kHz  Sensitivity: 88dB (1W / 1m)  Impedance: 6 Ohm  Flush Mounting Depth: 17.6mm  Cutout Diameter: 51mm 

    1 Available for pickup

    $89.99

  • JL Audio C1-525x : 5.25" Coaxial Speakers - 50W RMS JL Audio C1-525x : 5.25" Coaxial Speakers - 50W RMS, front side.

    JL Audio C1-525x : 5.25" Coaxial Speakers - 50W RMS

    4 Available for pickup

    C1-Series 5.25-Inch 50-Watt Coaxial Speaker System C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles. C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-525x is a proprietary, stamped, steel 5.25-inch (130 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers. Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling. When it comes to value, C1 is the real deal! Sold as a pair. Grilles not available. General Specifications Continuous Power Handling (RMS) 50 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 10 - 75 W / Ch. System Efficiency 89.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 54 Hz - 24 KHz ± 3 dB JL Audio C1-525x Manual

    4 Available for pickup

    $119.99

  • JL Audio C2-075ct : .75" Tweeters - 60W JL Audio C2-075ct : .75" Tweeters - 60W, front side.

    JL Audio C2-075ct : .75" Tweeters, 60W

    2 Available for pickup

    C2-Series 0.75-Inch 60-Watt Silk Dome Tweeters The silk dome tweeter is prized by audiophiles for delivering realistic, non-fatiguing, high-frequency performance. The C2 component tweeters are built with 0.75-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. Inline 12 dB / octave high-pass filters with tweeter protectors are included with this kit. The C2-075ct is designed to operate above 4 kHz with a minimum high-pass slope of 12 dB / octave. Sonic character: Clean and Powerful Sold as a pair. General Specifications Continuous Power Handling (RMS) 60 W Peak Music Power* 150 W Recommended Amplifier Power (RMS) 25 - 100 W / Ch. System Efficiency 91.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 4 kHz - 22 KHz ± 3 dB JL Audio C2-075ct Manual

    2 Available for pickup

    $149.99

  • JL Audio C2-570x : 5x7" Coaxial Speakers - 60W RMS

    JL Audio C2-570x : 5x7" Coaxial Speakers, 60W RMS

    6 Available for pickup

    C2-Series 5x7-Inch 60-Watt Coaxial Speaker System The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs. Many people mistakenly believe that an oval speaker cannot perform as well as a round one, leading to many instances of 5.25-inch speakers being installed into 5 x 7-inch openings. JL Audio has put in the engineering time and effort to create fantastic-sounding speakers that drop into oval openings and deliver equivalent performance to JL's 6.5-inch (165 mm) round speaker systems... guaranteed. So, don't make the mistake of losing cone area and efficiency by stepping down to a smaller round speaker... these ovals are as impressive as our round format systems. The C2-570x system features 5 x 7 / 6 x 8-inch (125 x 180 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. Tweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles. Grilles are not available for this speaker system. Sonic character: Clean and Dynamic Sold as a pair. General Specifications Continuous Power Handling (RMS) 60 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 15 - 100 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 53 Hz - 22 KHz ± 3 dB JL Audio C2-570x Manual

    6 Available for pickup

    $249.99

  • Morel Hybrid Integra 62 : 6.5" Coaxial Door Speakers, 100W RMS

    Morel Hybrid Integra 62 : 6.5" Coaxial Door Speakers, 100W RMS

    Pre-Order Today!

    Hybrid Integra Series 6-1/2" 100-Watt RMS 2-Way Coaxial Door Speakers Embracing Morel’s legendary craftsmanship, engineering, and innovation, the latest Hybrid systems define an ever-evolving concept of high-fidelity speaker design. Now in their fifth generation, the new Hybrid and Hybrid Integra systems give a further refined listening experience, captivating you with the raw emotions of listening to live music. Their subtle balance of resolution, power, and efficiency has been further optimized to exceed expectations regardless of what genre of music you enjoy.   The Integra, Morel’s point source system, is an innovative landmark in speaker design. It utilizes point-source topology to eliminate acoustic problems inherent in conventional coaxial systems. By creating a single sound source on the same axis, the tweeter and woofer seamlessly integrate, generating Omni-directional time alignment, heightened imaging, and sound dispersion. Now the Hybrid is available in 2-way and Integra point source (coaxial) solutions, as well as a new 3-way system to fit nearly any system requirement. CONTROLLED ACOUSTIC RESISTANCEThe C.A.R. Filter™ improves the acoustic loading by controlling airflow within the driver, mimicking the effects of a cabinet while improving power handling by 30%. This provides greater control over the cone movement for improved bass dynamics. EVC MOTORMorel speakers with EVC™ technology utilize voice coils that are up to three times larger than those used in conventional loudspeakers, enabling improved heat dissipation, power handling and linearity. The EVC™ design moves the magnetic motor system to within the voice coil, eliminating stray magnetic flux by effectively directing all the magnetic energy to the voice coil. The EVC architecture is over 90% more efficient than conventional design, magnetically shielded, and highly compact. HEXATECH™ ALUMINIUM VOICE COILMade from 100% aluminum wire shaped like a honeycomb, the Hexatech™ voice coil reduces air gaps in the coil windings, thereby increasing efficiency by up to 20%. Being lightweight, Hexatech™ voice coils are largely responsible for the extraordinary fast transient response Morel drive units are known for. HYBRID MAGNET MOTORThe Hybrid motor drive system uses a ferrite magnet together with a very powerful neodymium magnet. Combined they create a compact, lightweight motor system that is up to four times more powerful than conventional designs of the same size. With Hybrid, more amplified power is converted into sonic energy for flawless performance, even in a small driver. INTEGRADerived from the word “integrate”, Integra is a speaker consisting of both a woofer and tweeter that share a common chassis. Unlike a coaxial, its recessed tweeter is concentrically aligned with the woofer cone. This minimizes phase error and allows the sound field to be constant in all directions, creating a near-perfect time alignment. PAPER CONEIn use since the first loudspeakers, the paper continues to be an exceptional material of choice. Morel’s latest paper composite cones are ultra-lightweight, making them an exceptional pairing for drivers using smaller motors and voice coils. Sold by the Pair Specifications  MODEL SIZE & CONFIGURATION POWER HANDLING (WRMS) / PEAK POWER (W) SENSITIITY (2.83V/1M)(DB) FREQUENCY RESPONSE (HZ) CROSSOVER HYBRID INTEGRA 42 4" 2-way 80 /250 92 80-25000 MXR250.4i HYBRID INTEGRA 52 5¼" 2-way 120 / 500 90 45-25000 MXR250.4i HYBRID INTEGRA 62 6½" 2-way 140 / 600 91 35-25000 MXR250.4i Morel Hybrid Integra Series Door Speaker Manual

    Pre-Order Today!

    $799.99


You have seen 48 out of 331 products

Login

Forgot your password?

Don't have an account yet?
Create account