Kicker 44KXA8005 : 5-Channel Amplifier, 50-Watt x 4Ch + 200W Sub @ 4Ω, or + 400-Watt @ 2-Ohm
This KX series 5ch amplifier by Kicker uses powerful Class D technology for big power in a small chassis. This amp features an enormous 18dB of variable bass boost with the included wireless bass knob.
KXA amplifiers feature a Kicker SHOCwave™ bass restoration processor, gain control with “Optimal Input” indicator, a variable 24dB subsonic filter, KickEQ+™ with 18dB of variable remote controlled bass and slick looking top-mounted red LED light pipe.
This KX amplifier delivers as much as 50W x 4 channels with a sub channel configurable for 200W @ 4Ω or 400W @ 2Ω.
Specifications
| RMS Power [Watts] |
@ 14.4V, 4Ω stereo, ≤ 1% THD+N: 50 x 4
@ 14.4V, 2Ω stereo, ≤ 1% THD+N: 100 x 4
@ 14.4V, 4Ω bridged mono, ≤ 1% THD+N: 200 x 2 |
| Sub Channel RMS Power [Watts] |
@ 14.4V, 4Ω mono, ≤ 1.5% THD+N: 200 x 1
@ 14.4V, 2Ω mono, ≤ 1.5% THD+N: 400 x 1
@ 14.4V, 1Ω mono, ≤ 1% THD+N: +/- 10% |
| Length [in, cm] |
12 ¾, 32.4 |
| Height [in, cm] |
2 ⅛, 5.5 |
| Width [in, cm] |
8 5⁄16, 21 |
| Frequency Response [Hz] |
AMPS 1 - 2: 10Hz–20kHz
SUB: 10Hz-160Hz |
| Signal-to-Noise Ratio [dB] |
95 |
| Input Sensitivity |
250mV–10V |
| Selectable Electronic Crossover |
AMP 1: OFF/HP/LP, variable 10–5,000Hz with 10X switch;
24dB/octave
AMP 2: OFF/HP/LP/BP, variable HP 10–5,00Hz,
variable LP 40–5,000Hz with 10X switch; 24dB/octave
SUB: Variable LP 40–160Hz; 24dB/octave |
| Subsonic Filter |
(amp1) 24dB/octave, variable 10-500Hz, selectable high pass, low pass or all pass, w/10x switch; (amp2) 24dB/octave, variable high pass 10-500Hz, variable low pass 40-500Hz, selectable high pass, low pass, all pass or band pass, w/10x switch for lo pass; (KX.5 sub channel) 24dB/octave, variable 40-160Hz, low pass only |
| Subsonic Sub Channel Filter: |
Variable 10–80Hz, 24dB/octave |
KickEQ+™ Parametric Bass Boost
(Remote Control Adjustable) |
Boost - Variable 0-18db
Center Frequency-20Hz-80Hz
Bandwidth 1-5 |
| Remote Bass |
Yes |
| CEA Power |
50W x 4 @ 4 ohms (10Hz–20,000Hz)
200W x 1 @ 4 ohms (40Hz–160Hz) |
| CEA Signal-to-Noise Ratio |
-75dB CEA-2006B (ref: 1W, A-weighted) |
