JL Audio Slash 600/1v3 : Monoblock Class D Subwoofer Amplifier, 600 W x 1 @ 1.5-4 Ω
|Frequency Response||5 Hz - 250 Hz (+0, -1dB)|
|S/N Ratio, referred to highest rated power||>95 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)|
|S/N Ratio, referred to 1 W (Main Channels)||>68 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)|
|Damping Factor @ 4 Ω||>500 / 50 Hz|
|Damping Factor @ 2 Ω||>250 / 50 Hz|
|THD+N @ Rated Power (Main Channels)||<0.05% @ 4 Ω|
|Input Voltage Range @ RCA Inputs||Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)|
|Min.Copper Power / Ground Wire Gauge||4 AWG wire|
|Fuse Rating||60 A (AFS, AGU or MaxiFuse™)|
|@ 4 Ω||600 W RMS x 1|
|@ 3 Ω||600 W RMS x 1|
|@ 2 Ω||600 W RMS x 1|
|@ 1.5 Ω||600 W RMS x 1|
The best-selling amplifiers of all time are back in black!
The 600/1v3 deploys efficient Class D technology with a patented control circuit and JL Audio's signature R.I.P.S. power supply design to ensure full power delivery (600 W) over a wide range of load impedances and vehicle voltages.
A very complete set of signal processing features, including a parametric bass EQ and fully variable infrasonic filter, round out the package.
This amplifier features an all-black look that is pure, sexy evil, including the powder-coated cast alloy heat sink and end caps.
|Filter Slope(s)||12/24 dB/octave|
|Filter Frequency Range||40 Hz -200 Hz|
|Detented, Calibrated Filter Freq. Potentiometer||Yes|
|Filter Defeat Function||Yes|
|Infrasonic Filter||Variable, Defeatable|
|Bass Boost EQ||Parametric|
|Output Polarity Switch||No|
|Remote Subwoofer Level Control||No|
|Remote Bass EQ Boost Control||Optional (RBC-1)|
|Pass-Through Preamp Output||Buffered, w/independent filter|
|Height (H)||2.36 in / 60 mm|
|Width (W)||13.40 in / 340 mm|
|Depth (D)||9.25 in / 235 mm|