M-Sereies 2-Channel Class-D Full-Range Marine-Grade Amplifier, 100-Watts x 2ch @ 2-Ohm or 75-Watts @ 4-Ohm
This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts per channel into 2Ω (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is JL's NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.
The M200/2 includes a 12dB octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500Hz. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be controlled from a remote location.
This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
Specifications
| @ 4 Ω |
75 W RMS x 2 |
| @ 2 Ω |
100 W RMS x 2 |
| Bridged @ 4Ω |
200 W RMS x 1 |
| Frequency Response |
12 Hz - 22 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power |
>104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W |
>84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω |
>150 / 50 Hz |
| Damping Factor @ 2 Ω |
>75 / 50 Hz |
| THD+N @ Rated Power |
<1% @ 2 Ω per Ch. |
| Input Voltage Range @ RCA Inputs |
100 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge |
8 AWG wire |
| Fuse Rating |
20 A (AFS, AGU or MaxiFuse™) |
| Filter Mode(s) |
Low-Pass or High-Pass |
| Filter Slope(s) |
12 dB/octave |
| Filter Frequency Range |
50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometers |
Yes |
| Filter Defeat Function |
Yes |
| Remote Level Control |
Optional (HD-RLC) |
| Remote Level Modes |
N/A |
| Channel Input Mode Switch |
N/A |
| Pass-Through Preamp Output |
Buffered |
