Amplified Head-Unit Replacement Wiring-Harness Interface for Select 2006-2013 BMW 1-Series and 3-Series Vehicles
Provides accessory power (12 volt 10 amp)
Retains R.A.P. (retained accessory power)
Designed for amplified models
Retains audio controls on the steering wheel
Retains phone buttons (radio dependent)
Retains factory features: date, time, temperature display
Warning and parking sensor chimes are not retained
Micro-B USB updatable
*Note:* Warning and Parking sensor chimes are not retained
Amplified Applications
BMW
1 Series
2008-2013
3 Series
2006-2013
Axxess AXDIS-BW122 Installation Manual
Amplifier Add-On OEM Line-Converter T-Harness for Select 2006-2020 BMW and MINI Vehicles
For use with the Axxess AXDSP-L line converter.
Applications
BMW
1 Series
Base amp (non Fiber)
2008-2020
2 Series
Base amp (non Fiber)
2014-2020
3 Series
Base amp (non Fiber)
2006-2018
4 Series
Base amp (non Fiber)
2014-2020
5 Series
Base amp (non Fiber)
2010-2016
6 Series
Base amp (non Fiber)
2010-2017
7 Series
Base amp (non Fiber)
2010-2015
M3
Base amp (non Fiber)
2007-2013
X1
Base amp (non Fiber)
2015-2020
X3
Base amp (non Fiber)
2010-2018
X4
Base amp (non Fiber)
2015-2018
X5
Base amp (non Fiber)
2014-2018
X6
Base amp (non Fiber)
2015-2019
MINI
Cooper
2007-2015
Axxess AXDSPH-BM1 ManualAxxess AXDSPL-BM1 Manual
Add-On Amplifier OEM Integration Line Converter with DSP for Select 2006-2020 BMW and MINI Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for non-amplified models
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Applications
BMW
1 Series
Base amp (non Fiber)
2008-2020
2 Series
Base amp (non Fiber)
2014-2020
3 Series
Base amp (non Fiber)
2006-2018
4 Series
Base amp (non Fiber)
2014-2020
5 Series
Base amp (non Fiber)
2010-2016
6 Series
Base amp (non Fiber)
2010-2017
7 Series
Base amp (non Fiber)
2010-2015
M3
Base amp (non Fiber)
2007-2013
X1
Base amp (non Fiber)
2015-2020
X3
Base amp (non Fiber)
2010-2018
X4
Base amp (non Fiber)
2015-2018
X5
Base amp (non Fiber)
2014-2018
X6
Base amp (non Fiber)
2015-2019
MINI
Cooper
2007-2015
Axxess AXDSPL-BM1 Manual
Add-On Amplifier OEM Integration Interface for Select 2001-2017 BMW, MINI and Volkswagen Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-BM1 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
BMW
3-series
With NAV w/o Amp
2002-2006
5-series
non-amplified
2001-2003
M3
With NAV w/o Amp
2002-2006
X3
non-amplified
2004-2010
X5
non-amplified
2001-2006
Z4
non-amplified
2003-2008
MINI
Clubman
non-amplified
2008-2014
Convertible
non-amplified
2009-2015
Coupe
non-amplified
2012-2015
Hatchback
non-amplified
2007-2013
Roadster
non-amplified
2012-2015
VOLKSWAGEN
Beetle
non-amplified
2012-2015
CC
non-amplified
2009-2017
Eos
non-amplified
2007-2016
Golf
non-amplified
2002-2014
GTI
non-amplified
2002-2014
Jetta
non-amplified
2002-2015
Jetta Sportwagen
non-amplified
2010-2014
Passat
non-amplified
2002-2015
R32
non-amplified
2007-2009
Tiguan
non-amplified
2009-2015
Axxess AXLOC-BM1 Manual
Amplified or Non-Amplified Head-Unit Replacement Wiring-Harness Interface for Select 2006-2016 BMW and MINI Vehicles
Provides accessory power (12-volt 10-amp)
Retains R.A.P. (retained accessory power)
Provides NAV outputs (parking brake, reverse, and V.S.S)
Retains warning chimes
For non-amplified models, or when bypassing a factory amplifier
Retains balance and fade
Micro-B USB updatable
Non-Amplified Applications
BMW
1 Series
2008-2013
3 Series
2006-2013
M3
2007-2013
MINI
Clubman (R55)
2008-2014
Convertible (R57)
2009-2015
Countryman (R60)
2011-2016
Coupe (R58)
2012-2015
Hatchback (R56)
2007-2013
Roadster (R59)
2012-2015
Amplified Applications
MINI
Countryman (R60)
2011-2016
Axxess Interface AXRC-BW1 Manual
Add-on Remote Start Wiring Harness for Select 2005-2016 BMW and MINI Vehicles
T-harness for select BMW/Mini models 2005-2016. Includes XP-BM1 expansion module. Only compatible with select remote start systems. Plugs directly into vehicle factory connectors with little-to-no analog connections required.
Click Here to View Vehicle Coverage
Head-Unit Replacement Adapter Cable for Select 1973-2017 Audi, BMW, Mercedes VW and Other Vehicles
If you are replacing the radio in your vehicle, this antenna cable adapter ensures that you can continue to use your factory antenna. It is a simple yet necessary cable that adapts the vehicle’s original antenna cable to plug into an aftermarket radio with a male Motorola™ connector on one end and a female Volkswagen/Audi European-style connector on the other.
Antenna adapter cable
Used to adapt the vehicle’s antenna cable to use with an aftermarket radio
Male Motorola™ connector on one end
Female Volkswagen/Audi European-style connector on the other end
Enter your vehicle model to see if this is compatible with your vehicle
NOTE: Some newer European radios also have capacitors which do not allow this adaptor to work properly, use 40-VW12
Applications
AUDI
80 Series
1988-1992
90 Series
1988-1995
100 Series
1989-1994
200 Series
1989-1991
A4
1996-1997
A6
1998-2001
S8
2000-2003
A8
1997-2003
allroad quattro
2001-2003
BMW
3 Series
1992-2006
ALPINA D10
1997-2000
5 Series
1990-2000
7 Series
1990-2001
M
1998-2002
M3
1995-2006
M5
1991-1993
Z3
1996-2002
Z8
2000-2003
BUICK
LeSabre
2000-2005
CADILLAC
CTS
2003-2007
CTS-V
2003-2007
SRX
2004-2006
DODGE
Sprinter
2007-2009
FORD
Focus
2003-2004
Transit Connect
2010-2012
FREIGHTLINER
Sprinter
2007-2013
LAND ROVER
Freelander
2002-2005
Range Rover
1995-2002
MERCEDES
Sprinter
w/Radio Delete only
2010-2017
MERCURY
Cougar
1999-2002
OLDSMOBILE
Aurora
2001-2003
PONTIAC
Bonneville
2000-2005
GTO
2004-2006
PORSCHE
911 (996)
1999-2002
911 (993)
1994.5-1998
911
1973-1994
928
1994-1996
968
1992-1996
Boxter (986)
1997-2004
RAM
ProMaster
2014-2017
SAAB
9-2x
2005
9-3
1999-2006
9-5
1998-2005
SMART
ForTwo
2008-2015
VOLKSWAGEN
Cabrio
1995-2002
Corrado
1990-1993
Euro Van
1993-2003
Golf
1986-1997
GTI
1986-1994
Jetta
1993-1997
Passat
1990-1997
Quantum
1982-1987
Head-Unit Replacement Antenna-Adapter for Select 1981-2008 Mercedes Vehicles
If you are replacing the radio in your vehicle, this antenna cable adapter ensures that you can continue to use your factory antenna. It is a simple yet necessary connector that adapts the vehicle’s original antenna cable to plug into an aftermarket radio with a male Motorola™ connector on one end and a female Volkswagen/Audi European-style connector on the other.
Antenna adapter plug
Used to adapt the vehicle’s antenna cable to use with an aftermarket radio
Male Motorola™ connector on one end
Female Volkswagen/Audi European-style antenna connector on the other end
Does not have an internal capacitor as that limits the proper reception on some European vehicles
Enter your vehicle model to see if this is compatible with your vehicle
Applications
MERCEDES BENZ
190 Series
1982-1993
300 Series
1984-1993
350 Series
1990-1991
380 Series
1981-1985
400 Series
1991-1993
420 Series
1986-1991
500 Series
1990-1993
560 Series
1986-1991
C-Class
1994-2004
CL-Class
1998-2002
CLK-Class
2004
CLK-Class
1998
CLK-Class (320, 430)
2003
CLK-Class (500, 55 AMG)
2003
E-Class
1994-2002
G-Class
2002-2006
ML-Class
1998-2005
S-Class
1994-2003
SL-Class
1994-2004
SLK-Class
1998-2004
SLR-Class (McLaren)
2005-2008
Head-Unit Replacement Antenna Adapter for Select 1973-2017 Audi, BMW, Mercedes VW and Other Vehicles
If you are replacing the factory antenna in your vehicle, this antenna cable adapter ensures that you can continue to use your original factory radio. It is a simple yet necessary cable that adapts the aftermarket antenna cable to plug into the vehicle’s factory radio with a female Motorola™ connector on one end and a Volkswagen/Audi European-style with a flat connector on the other.
Antenna adapter cable
Used to adapt the vehicle’s original factory radio with a flat connector to use with an aftermarket antenna
Female Motorola™ connector on one end
Volkswagen/Audi European-style flat connector on the other end
Enter your vehicle model to see if this is compatible with your vehicle
Applications
AUDI
80 Series
1988-1992
90 Series
1988-1995
100 Series
1989-1994
200 Series
1989-1991
A4
1996-1997
A6
1998-2001
S8
2000-2003
A8
1997-2003
allroad quattro
2001-2003
BMW
3 Series
1992-2006
ALPINA D10
1997-2000
5 Series
1990-2000
7 Series
1990-2001
M
1998-2002
M3
1995-2006
M5
1991-1993
Z3
1996-2002
Z8
2000-2003
BUICK
LeSabre
2000-2005
CADILLAC
CTS
2003-2007
CTS-V
2003-2007
SRX
2004-2006
DODGE
Sprinter
2007-2009
FORD
Focus
2003-2004
Transit Connect
2010-2012
FREIGHTLINER
Sprinter
2007-2013
LAND ROVER
Freelander
2002-2005
Range Rover
1995-2002
MERCEDES
Sprinter
w/Radio Delete Only
2010-2017
MERCURY
Cougar
1999-2002
OLDSMOBILE
Aurora
2001-2003
PONTIAC
Bonneville
2000-2005
GTO
2004-2006
PORSCHE
911 (996)
1999-2002
911 (993)
1994.5-1998
911
1973-1994
928
1994-1996
968
1992-1996
Boxter (986)
1997-2004
RAM
ProMaster
2014-2017
SAAB
9-2x
2005
9-3
1999-2006
9-5
1998-2005
SMART
ForTwo
2008-2015
VOLKSWAGEN
Cabrio
1995-2002
Corrado
1990-1993
Euro Van
1993-2003
Golf
1986-1997
GTI
1986-1994
Jetta
1993-1997
Passat
1990-1997
Quantum
1982-1987
AUDI
A3
2006-2007
S4
2000-2006
A4
1998-2006
A6, RS 6, S6
2002-2004
allroad quattro
2004-2005
TT
2000-2006
DODGE
Sprinter
2003-2006
FREIGHTLINER
Sprinter
2003-2006
VOLKSWAGEN
Beetle
1998-2010
Golf
1998-2002
GTI
1995-2001
Jetta
1998-2002
Passat
1998-2001
Non-Amplified Head-Unit Replacement Wiring-Harness Adapter for Select 1991-2006 BMW and Land-Rover Vehicles
Wiring harness for fast and easy radio installation
Plugs into the car’s original radio connectors on one side
Color-coded wires on the other side are connected to the aftermarket radio
No wire cutting needed for factory radio connectors
Provides electrical power to the radio for a four-speaker connection
Non-Amplified Applications
BMW
3 Series
1992-2006
5 Series
1990-2000
Alpina D10
1997-2000
M
1998-2002
M3
2001-2006
M3
1995-1999
M5
1991-1993
Z3
1996-2002
LANDROVER
Freelander
2002-2004
Amplified or Non-Amplified Head-Unit Replacement Wiring-Harness Adapter for Select 2001-2008 BMW, MINI and Pontiac Vehicles
Plugs into car
Power / 4 Speakers
Non-Amplified Applications
BMW
3 Series
2002-2006
5 Series
2001-2003
Alpina D10
2001-2003
M3
2002-2006
M5
2001-2003
X5
2000-2006
Z4
2003-2008
MINI
Convertible (R52)
2005-2008
Hatchback (R50, R53)
2002-2006
PONTIAC
G8
2008-2009
Amplified Applications
BMW
3 Series
2002-2006
M3
2002-2006
Z4
2003-2008
Z8
2000-2003
Double-DIN Size Head-Unit Replacement Dash-Kit for Select BMW 3-Series Vehicles, without factory navigation
This stereo installation kit is engineered to help you install a 4" tall (Double-DIN) aftermarket radio into the original vehicle dashboard. This dash kit helps make radio replacement simple and is painted scratch-resistant matte black to match the original look and feel of the vehicle's dashboard. Minor modifications to the climate control panel are required for this installation and instructions are included. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 4" tall aftermarket radio
Painted scratch-resistant matte black
Designed for models without factory navigation
Minimal modifications to the climate control panel are necessary
To retain the factory heated seat switches, also use 98-9306
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instruction
Applications
BMW
3 Series
coupe, convertible, wagon
2012-2013
3 Series
2007-2011
3 Series
sedan, wagon
2006-2006
M3
2007-2013
BMW Head-Unit Replacement Heated-Seat Switch Relocation Pocket for Select 2006-2013 BMW 3-Series Vehicles (Non-NAV Models)
This switch relocation pocket has been designed to be used in installations when using the 95-9306B radio dash kit. The relocation pocket makes retention of the original factory heated seat switches possible. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this pocket to make it fit when installing an aftermarket radio.
Designed to be used with the 95-9306B radio dash kit when retaining the factory heated seat switches
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes an extension cable to relocate the switches with detailed installation instructions
Applications
BMW
3 Series
coupe, convertible, wagon
2012-2013
3 Series
2007-2011
3 Series
sedan, wagon
2006-2006
M3
2007-2013
DIN-Size Head-Unit Replacement Dash-Kit for Select 1999-2006 BMW 3-Series and M3 Vehicles
This stereo installation kit has been engineered to help you install a 2” tall (Single-DIN) aftermarket radio into the original vehicle dashboard, making radio replacement simple. The dash kit is designed to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Professional Installer Series TurboKit designed to fit any standard 2” tall aftermarket radio
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes detailed installation instructions
Applications
BMW
+
3 Series
conv., coupe (1 row of buttons)
N
2006
3 Series
conv., coupe (5 sep. buttons)
N
2006
3 Series
1 long row of buttons
N
2002-2005
3 Series
5 separate buttons
N
2002-2005
3 Series
1 long row of buttons
N
1999-2001
3 Series
5 separate buttons
N
1999-2001
M3
1 long row of buttons
N
2002-2006
M3
5 separate buttons
N
2002-2006
M3
1 long row of buttons
N
2001
M3
5 separate buttons
N
2001
(+) Without NAV
Metra 99-9300 Installation Manual
DIN-Size Stereo Replacement Dash-Kit for Select 2003-2008 BMW-Z4 Vehicles
This stereo installation kit has been engineered to help you install a 2” tall (Single-DIN) aftermarket radio into the original vehicle dashboard, making radio replacement simple. The dash kit is contoured to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 2” tall aftermarket radio
Contoured to match the factory dash
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes detailed installation instructions
Applications
BMW
M
2006-2007
Z4
2003-2008
Metra 99-9303 Installation Manual