On Sale / Clearance

Best Car Stereo Deals happening now on our Clearance Page!

NOW SHIPPING ALL CLEARANCE AND ON-SALE PRODUCTS LISTED ON THIS PAGE

If you would like to have something "On Sale / Clearance" shipped to you please give us a call to place your order. Remote Start orders will, have all vehicle specific firmware uploaded to the bypass module and be provided with installation manuals. We can pre-wire any Remote Start for your installation for a small labor charge of $75. Any required add-on relays for your installation are $10 a piece.

Limited time offer! Automotive Stereos, Speakers, Subwoofers, and Electronics that are On-Sale - while supplies last!

50 products

  • Sale -$39.00Last One! A-Trend A111-10CP : Single 10" Sealed Sub Box for, 2004-2014 Colorado Canyon Extended Cab

    A-Trend A111-10CP : Single 10" Sealed Sub Box, 2004-2014 Colorado Canyon (Extended Cab)

    1 Available for pickup

    Single 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2004-2014 Chevrolet-Colorado or GMC-Canyon Extended-Cab Trucks CLICK HERE TO VIEW SUBWOOFERS THAT FIT THIS BOX! Accu-Tuned 10” Single vented subwoofer enclosure designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers. OEM-Fit is designed and engineered specifically for the 1999-2007 Chevrolet / GMC trucks to ensure an OEM fit without impeding the operation of the back seat. High-Grade MDF for Ultimate structural rigidity and no-flex construction. 1.1 Cubic Feet Gross and 1.0 Net Volume internal net air space are ideal for tight accurate bass reproduction. Subwoofer Mounting Depth is 6.25” which is ideal for full size and lower profile subwoofers. Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly. Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber. Premium OEM Grade Carpeting for factory look and durability. Dimensions Sub Cut Out: 9.125”, Mounting Depth: 6.25”, Width: 27.25”, Height: 8.75”, Depth: 11.875” Specifications Configuration: Single Vented Finish: Charcoal Carpeted Width: 27.25" Height: 8.25" Depth: 11.88" Max Mounting Depth: 6.25" Gross VolumePer Sub: 1.35 Net Volume Per Sub: 1.00

    1 Available for pickup

    $128.99$89.99

  • Sale -$70.00Last One! A-Trend A142-10CP : Dual 10" Sealed Sub Box, 2007-2014 Silverado Sierra Extended Cab A-Trend A142-10CP : Dual 10" Sealed Sub Box, 2007-2014 Silverado Sierra Extended Cab, specs.

    A-Trend A142-10CP : Dual 10" Sealed Sub Box, 2007-2014 Silverado Sierra (Extended Cab)

    1 Available for pickup

    Dual 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2007-2014 Chevrolet-Silverado or GMC-Sierra Extended-Cab Trucks CLICK HERE TO VIEW SUBWOOFERS THAT FIT THIS BOX! Custom downfire fit under rear seat. Fits bench style, 60/40 style seats Designed specifically for 2007-2014 Chevy Silverado and GMC Sierra Extended Cab Trucks Dual 10" Subwoofer Enclosure Premium Carpet Finish 3/4" Mounting Baffle Hardwood MDF construction Rounded edges Glued and Braced construction Subwoofer mounting depth: 6.25" Box volume: 0.8 cubic feet (per chamber) Specifications Width 52.75 Height 6.875 Depth 11.875 Mounting Depth 6.25 Gross Cubic Feet Per Side 0.8 Net Cubic Feet Per Side 0.8 Excursion 3.625

    1 Available for pickup

    $249.99$179.99

  • Sale -$40.00Last One! A-Trend A151-10CP : Single 10" Sealed Sub Box, 1999-2007 Silverado Sierra Extended Cab A-Trend A151-10CP : Single 10" Sealed Sub Box, 1999-2007 Silverado Sierra Extended Cab, specs.

    A-Trend A151-10CP : Single 10" Sealed Sub Box, 1999-2007 Silverado Sierra (Extended Cab)

    1 Available for pickup

    Single 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 1999-2007 Chevrolet-Silverado or GMC-Sierra Extended-Cab Pickups CLICK HERE TO VIEW SUBWOOFERS THAT FIT THIS BOX! Custom downfire fit under rear driver side seat. No modification required. Doesn't affect rear seat latching. Single 10" Subwoofer Enclosure Designed specifically for 1999-2007 Chevy Silverado and GMC Sierra Extended Cab Trucks Premium Carpeted Finish 3/4" Mounting Baffle Hardwood MDF construction Rounded edges Glued and Braced construction Subwoofer mounting depth: 7.25" Box volume: 0.93 cubic feet (per chamber) Specifications Width 24 Height 9.125 Depth 14.75 Mounting Depth 7.25 Gross Cubic Feet Per Side 0.93 Net Cubic Feet Per Side 0.93 Excursion 1.625

    1 Available for pickup

    $144.99$104.99

  • Sale -$65.00Last One! A-Trend A182-12CPA : Dual 12" Sealed Sub Box, 2007-2013 Silverado Sierra Crew Cab

    A-Trend A182-12CPA : Dual 12" Sealed Sub Box, 2007-2013 Silverado Sierra (Crew Cab)

    1 Available for pickup

    Dual 12-Inch Sealed Carpeted Subwoofer-Enclosure With AMP Space for Select 2007-2013 Chevrolet-Silverado and GMC-Sierra Crew-Cab Pickups CLICK HERE TO VIEW SUBWOOFERS THAT FIT THIS BOX! Accu-Tuned 12” Dual sealed subwoofer enclosure with designated amp room designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers. OEM-Fit is designed and engineered specifically for the 2007 - 2013 Chevrolet / GMC Silverado / Sierra Crew Cab to ensure an OEM fit without impeding the operation of the back seat. High-Grade MDF for Ultimate structural rigidity and no-flex construction. 0.83 Cubic Feet Net Volume internal air space per sub is ideal for tight accurate bass reproduction. Subwoofer Mounting Depth is 6.5” which is ideal for lower profile subwoofers. Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly. Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber. Premium OEM Grade Carpeting for factory look and durability. Dimensions Sub cut out: 9.125”, Mounting Depth: 6.5”, Width: 52.5”, Height: 6.75”, Depth: 17.75” Specifications Configuration: Dual Sealed Finish: Charcoal Carpeted Width: 52.50" Height: 6.75" Depth: 14.75" Max Mounting Depth: 6.50" Gross VolumePer Sub: 1.30 Net Volume Per Sub: .65 Installation Note: This amp space box makes installing your amp and subs simple, fast, and easy. Almost downright enjoyable. Just mount your amp on the shelf, run your wires and call it a day. The amp space is 14" wide by 17" long. Longer amps can actually run off the box in the back if needed. You can also drill thru the shelf to help hide some of the wires as shown to the left. Not only does this box look and fit great, but it adds a whole new dimension of functionality and usability. 

    1 Available for pickup

    $264.99$199.99

  • Sale -$19.00Last One! Alpine RUX-KNOB : Bass Control Knob for Alpine Amplifiers. Alpine RUX-KNOB : Bass Control Knob for Alpine Amplifiers, front side.

    Alpine RUX-KNOB : Bass Control Knob for Alpine Amplifiers - Discontinued

    1 Available for pickup

    Alpine Amplifier Bass Control Knob The optional RUX-KNOB remote bass control knob plugs right in to select Alpine amplifiers for quick direct subwoofer control to make bass adjustments on the fly.

    1 Available for pickup

    $24.99$5.99

  • Sale -$52.00 Alpine S-S69 : 6x9" 85W RMS Coaxial Speakers

    Alpine S-S69 : 6x9" 85W RMS Coaxial Speakers - Discontinued

    2 Available for pickup

    Alpine S-Series 6X9-Inch Coaxial 2-Way Speakers, 85-Watt RMS The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. Alpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection. Specificatons 85W RMS/260W Peak Nominal Impedance 4Ω Frequency Response: 65-22kHz 1” Silk Dome Tweeter CFRP (Carbon Fiber Reinforced Plastic) Cone H.A.M.R. Surround CustomStamped Steel Frame 35mm voice coil Optional grille sold separately (KTE-S69G)

    2 Available for pickup

    $129.99$77.99

  • Sale -$55.00Last One! Axxess AXGM-04 : Radio Replacement Wiring Harness, 2000-2013 GM Vehicles (Amplified)

    Axxess AXGM-04 : Radio Replacement Wiring Harness , 2000-2013 GM Vehicles (Amplified w/Onstar) - Discontinued

    1 Available for pickup

    Amplified Head-Unit Replacement Wiring-Harness Interface for Select 2000-2013 GM Vehicles Provides accessory power (12-volt 10-amp) Retains R.A.P. (Retained Accessory Power) Used in amplified systems Retains chimes and balance and fade Provides NAV outputs (parking brake, reverse, mute and speed sense) Pre-wired AXSWC harness (AXSWC sold separately) Retains OnStar®/OE Bluetooth® Adjustable gain control for chimes and OnStar® High-level speaker input USB updatable Applications BUICK Century 2004-2005 LaCrosse (aka Allure in Canada) 2005-2009 Rainier 2004-2007 Rendezvous 2002-2007 Terraza 2005-2007 CADILLAC Escalade 2003-2006 Escalade ESV 2003-2006 Escalade EXT 2003-2006 CHEVY Avalanche 2003-2006 Cavalier 2000-2005 Colorado 2004-2012 Corvette 2005-2013 Express 2003-2007 Impala 2000-2005 Malibu 2001-2005 Monte Carlo 2000-2005 Silverado Classic 2007 Silverado 2003-2006 SSR 2003-2006 Suburban 2003-2006 Tahoe 2003-2006 Trailblazer 2002-2009 Uplander 2005-2008 Venture 2000-2005 GMC Canyon 2004-2012 Envoy 2002-2009 Savana 2003-2007 Sierra Classic 2007 Sierra 2003-2006 Yukon 2003-2006 Yukon XL 2003-2006 HUMMER H2 2003-2007 H3 2006-2010 ISUZU Ascender 2003-2008 OLDSMOBILE Alero 2001-2004 Bravada 2002-2004 Intrigue 2002 Silhouette 2000-2004 PONTIAC Aztec 2001-2005 Grand Am 2001-2005 Grand Prix 2004-2008 Montana 2000-2005 Montana SV6 2005-2007 Sunfire 2000-2005 SAAB 9-7x 2005-2009 SATURN Relay 2005-2007 Axxess Interface AXGM-04 Manual

    1 Available for pickup

    $154.99$99.99

  • Sale -$32.00Last One! Axxess AXVI-9004 : Radio Replacement Wiring Harness, 2002-2015 Audi (Amplified or Non-Amplified) Axxess AXVI-9004 : Radio Replacement Wiring Harness, top view.

    Axxess AXVI-9004 : Radio Replacement Wiring Harness, 2002-2015 Audi (Amplified or Non-Amplified) - Discontinued

    1 Available for pickup

    Amplified and Non-Amplified Head-Unit Replacement Wiring-Harness Interface for Select 2002-2015 Audi Vehicles This vehicle-specific interface is designed for use when installing an aftermarket radio. It retains R.A.P. (Retained Accessory Power) and provides 12-volt 10-amp accessory power and NAV output for parking brake, reverse, and speed sense. This interface features easy plug-n-play connectivity and a pre-wired harness is included for the AXSWC, which is sold separately. Features: Provides accessory power (12-volt 10-amp) Retains R.A.P. (Retained Accessory Power) Provides wires for multimedia radios (park brake, reverse, speed sense) Prewired AXSWC harness (AXSWC sold separately) Retains balance and fade Micro-B USB updatable Interface Components: AXDI-AI2 interface LD-AX-XSVI-AU1 harness LD-AX-XSVI-AU2 harness Amplified and Non-Amplified Applications AUDI A3 w/ Concert radio 2006-2007 A3 2006-2007 A3 w/ Symphony Plus radio 2006-2007 A3 w/ Symphony radio 2006-2007 A3 2008-2013 A4, RS 4, S4 2007-2008 A4, RS 4, S4 2005-2008 A4, S4 w/ Symphony radio 2002-2005 A4, S4 w/ Symphony Plus radio 2006-2006 A4, S4 w/ Symphony radio 2006-2006 A4, S4 convertible 2009-2009 A6, RS 6, S6 2002-2004 allroad quattro 2004-2005 TT 2002-2006 TT, TTS 2008-2015 Axxess Interface AXVI-9004 Manual

    1 Available for pickup

    $161.99$129.99

  • Sale -$118.00Last One! Axxess Interface CHTO-02 : Amplified Radio Replacement Wiring Harness, 2002-2008 Chrysler, Dodge

    Axxess CHTO-02 : Radio Replacement Wiring Harness, 2002-2010 Chrysler Dodge (Amplified) - Discontinued

    1 Available for pickup

    Amplified Head-Unit Replacement Wiring Interface-Harness for Select 2002-2010 Chrysler and Dodge Vehicles The CHTO-02 interface is designed to allow the user to replace the OEM radio with an aftermarket unit in amplified 2002-2004 Dodge Ram, 2004-2008 Chrysler Pacifica and retain the use of the OEM amplified audio system. Provides accessory power (12-volt 10-amp) Retains R.A.P. (retained accessory power) Designed for amplified systems Provides NAV outputs (parking brake, reverse, speed sense) Pre-wired ASWC-1 harness (ASWC-1 sold separately) Adjustable gain control for overall volume High level speaker input Retains balance and fade Micro-B USB updatable Applications CHRYSLER Pacifica 2004-2008 DODGE Ram Pickup 1500 2002-2004 Ram Pickup 2500, 3500 2003-2004 Viper 2008-2010 Axxess Interface CHTO-02 Manual - new part#AXTO-CH2

    1 Available for pickup

    $237.99$119.99

  • Last One! Axxess GMOS-LAN-09 : Radio Replacement Wiring Harness, 2014-2020 Chevy GMC (Non-Amplified)

    Axxess GMOS-LAN-09 : Radio Replacement Wiring Harness, 2014-2020 Chevy GMC (Non-Amplified) - Discontinued

    1 Available for pickup

    Non-Amplified Head-Unit Replacement Wiring Harness for Select 2014-2020 Chevy and GMC Vehicles Provides accessory power(12-volt 10-amp) Retains R.A.P. (retained accessory power) Used in non-amplified systems Retains chimes Provides NAV outputs (mute / parking brake / reverse / speed sense) Retains OnStar / OE Bluetooth Adjustable volume for chimes and OnStar Retains OE AUX input Retains the factory backup camera (IOA radio) High level speaker input Retains balance and fade USB updatable Pre-wired ASWC-1 harness (ASWC-1 sold separately) Applications CHEVY Camaro w/ 8-inch radio, RPO code: IO5/IO6 2015-2018 Colorado w/ RPO code I05 or I06 2015-2018 Equinox w/ RPO code I05 or I06 2018 Malibu w/ 8-inch radio, RPO code: IO5/IO6 2016-2018 Silverado 1500 LD, 2500 HD, 3500 HD w/ 8" radio, RPO code: IO5 or I06 2015-2019 Silverado 1500 w/ 8" radio, RPO code: IO5 or I06 2014 Suburban 2015-2020 Tahoe 2015-2020 GMC Canyon w/ 8-inch radio, RPO code: IO5/IO6 2015-2018 Sierra 1500, 2500 HD, 3500 HD w/ 8" radio, RPO code: IO5 or I06 2015-2018 Sierra 1500 w/ 8" radio, RPO code: IO5 or I06 2014 Yukon 2015-2020 Yukon XL 2015-2020 Axxess Interface GMOS-LAN-09 Manual - new part#AXRC-GMLN9

    1 Available for pickup

    $79.99

  • Sale -$29.01Last One! Axxess LC-GMRC-LAN-09 : Radio Replacement Wiring Harness, 2014-2020 Buick Chevy GMC (Non-Amplified)

    Axxess LC-GMRC-LAN-09 : Radio Replacement Wiring Harness, 2014-2020 Buick Chevy GMC (Non-Amplified) - Discontinued

    1 Available for pickup

    Non-Amplified Head-Unit Replacement Wiring Harness for Select 2014-2020 Buick, Chevy and GMC Vehicles Provides accessory power (10-amp) Retains R.A.P. (retained accessory power) Provides wires for multimedia radios (park brake, reverse, speed sense) Used in non-amplified models, or when bypassing a factory amp Designed for models without OnStar Retains all warning chimes High level speaker input Retains balance and fade Provides illumination output Micro-B USB updatable *The RPO code is located in the Service Parts Identification sticker Applications BUICK LaCrosse 2014-2016 Regal 2014-2017 CHEVY Camaro w/ 8-inch radio, RPO code: IO5/IO6 2016-2018 Colorado w/ 8-inch radio, RPO code: IO5/IO6 2015-2018 Equinox w/ 8-inch radio, RPO code: IO5/IO6 2018 Malibu w/ am/fm radio, RPO code: IP1 2016-2018 Silverado 1500 LD, 2500 HD, 3500 HD w/ 8" radio, RPO code: IO5 or I06 2015-2019 Silverado 1500, 2500 HD, 3500 HD w/ 4.2" Base radio, RPO code: IO3 2015-2018 Silverado 1500 w/ 8" radio, RPO code: IO5 or I06 2014 Silverado 1500 w/ 4.2" Base radio, RPO code: IO3 2014 Suburban 2015-2020 Tahoe 2015-2020 Trax RPO code: IP1 2017-2020 GMC Canyon w/ 8-inch radio, RPO code: IO5/IO6 2015-2018 Sierra 1500, 2500 HD, 3500 HD w/ 8" radio, RPO code: IO5 or I06 2015-2018 Sierra 1500, 2500 HD, 3500 HD w/ 4.2" Base radio, RPO code: IO3 2015-2017 Sierra 1500 w/ 8" radio, RPO code: IO5 or I06 2014 Sierra 1500 w/ 4.2" Base radio, RPO code: IO3 2014 Yukon 2015-2020 Yukon XL 2015-2020 Axxess Interface LC-GMRC-LAN-09 - new part#AXRC-GMLN9

    1 Available for pickup

    $89.00$59.99

  • Sale -$10.00 Directed Electronics 556UXL : Add-On Remote Start Transponder Key Box

    Directed Electronics 556UXL : Add-On Remote Start Transponder Key Box

    2 Available for pickup

    Aftermarket Remote-Start and Factory Key Security Box and Trasponder Bypass System Universal immobilizer bypass for a remote start system Compatible with most factory RF immobilizer or transponder systems Requires permanent key mount Temporarily overrides the factory immobilizer Maintains integrity of factory anti-theft system Kit can be tuned for use with European or domestic vehicles

    2 Available for pickup

    $24.99$14.99

  • Sale -$20.00Last One! iSimple ISFM2351 : Universal Add-on Bluetooth Module

    iSimple ISFM2351 : Universal Add-on Bluetooth Module - Discontinued

    1 Available for pickup

    Tranzit BLU HF Factory Stereo Add On Bluetooth Module Texting and driving is downright dangerous. Driving requires focus, concentration, and full awareness. But sometimes, you need to take an urgent call that just can’t wait. Prevent the dangers of using your phone on the go with TranzIt BLU HF. Engineered to work with most smartphones, TranzIt BLU HF is designed for crisp, clear communication without taking your eyes off the road. The touch-button control simplifies music playback, calls and voice recognition, and the 3.5mm audio output connects your device to anything with an auxiliary (AUX) input. Now you’ll be able to enjoy your smartphone’s audio through your car’s FM radio. FEATURES Hands-free calling. Call anyone without taking your attention off the road. TranzIt BLU HF is designed to make it as easy as possible to use your phone to communicate, without endangering yourself or other drivers. Wireless audio streaming. TranzIt BLU HF communications with your device via Bluetooth, eliminating the need for cumbersome wires. Music playback control button. Wirelessly control your music playback with a simple button. Compatible with your phone’s VR function. Use your phone’s VR button to send texts and emails, dial a contact, or get directions from online. Antenna input and output. TranzIt BLU HF has universal radio compatibility. Bluetooth enabled FM transmitter with HFP, A2DP, & AVRCP support. No aux? No problem! Transmit music and podcasts from your phone directly to your car’s FM receiver. Dash-mountable control button. The control button can be conveniently placed on your dashboard, where it’s easily within reach. Visor clip. Flexible microphone placement options ensure that you can talk comfortably. I-Simple ISFM2351 Manual

    1 Available for pickup

    $179.95$159.95

  • Sale -$50.00 300W 10" Subwoofer Driver, 4Ω Single Voice Coil : JL Audio 10W0v3 300W 10" Subwoofer Driver, 4Ω Single Voice Coil : JL Audio 10W0v3, side view.

    JL Audio 10W0v3 : 300W 10" Subwoofer Driver, 4Ω Single Voice Coil - Open Box Clearance

    2 Available for pickup

    W0-Series 10-Inch 300-Watt Subwoofer Driver, 4-Ohm SVC The JL Audio 10" W0v3 subwoofer driver is a rugged performer with excellent excursion capability and linearity while sporting a 2 inch diameter voice coil and JL's patented Elevated Frame Cooling design for enhanced power handling and reliability. This 10 inch subwoofer is best used with an amplifier in the 75W - 300W range and is optimized to operate in a compact 0.65 cu. ft. (18.4 l) sealed enclosure, or a 1.125 cu. ft. (31.9 l) ported enclosure. General Specifications Continuous Power Handling (RMS) 300W RMS Recommended Amplifier Power (RMS) 75W - 300W RMS Nominal Impedance (Znom) 4Ω JL Audio 10W0v3 Manual

    2 Available for pickup

    $129.99$79.99

  • Sale -$80.00Last One! 300W 10" Subwoofer Driver, 2Ω or 4Ω Single Voice Coil : JL Audio 10W1v3 300W 10" Subwoofer Driver, 2Ω or 4Ω Single Voice Coil : JL Audio 10W1v3, side view.

    JL Audio 10W1v3 : 300W 10" Subwoofer Driver, 2Ω - Open Box Clearance

    1 Available for pickup

    W1-Series 10-Inch 300-Watt Subwoofer Driver, 2-Ohm SVC The JL Audio 10" W1v3 subwoofer driver is a very suitable option when space is limited with smaller amplifiers. It features a low mounting depth of 4.6 inches and a compact motor structure that allows it to comfortably fit in tight mounting locations. There is no pole vent on the rear of the subwoofer which allows the motor structure to be placed directly against an enclosure boundary.  Excellent excursion capability and linearity allow the 10W1v3 to reproduce sub-bass with shocking extension and quality. The JL Audio 10W1v3 is best used with an amplifier in the 75W - 300W RMS range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure. General Specifications Continuous Power Handling 300W RMS Recommended Amplifier Power 75W - 300W RMS Nominal Impedance 2Ω JL Audio 10W1v3 Manual

    1 Available for pickup

    $229.99$149.99

  • Sale -$200.00 JL Audio 10W3v3 : 10-Inch 500-Watt Subwoofer Driver, 2-Ohm or 4-Ohm SVC, front side view. JL Audio 10W3v3 : 10-Inch 500-Watt Subwoofer Driver, 2-Ohm or 4-Ohm SVC

    JL Audio 10W3v3 : 500W 10" Subwoofer Driver, 2Ω - Open Box Clearance

    2 Available for pickup

    W3-Series 10-Inch 500-Watt Subwoofer Driver, 2-Ohm SVC The JL Audio 10W3v3 subwoofer driver has excellent power handling, reasonable enclosure requirements, and a long excursion for its chassis to deliver excellent bass reproduction in 500W RMS power applications. JL Audio technologies and proprietary assembly designs in the 10W3v3-2 and 10W3v3-4 subwoofers enhance linearity and reliable performance results. The JL Audio 10W3v3 is best used with an amplifier in the 150W - 500W RMS range and is optimized to operate in a compact 0.625 cu. ft. (17.7  l) sealed enclosure, or a 1.25 cu. ft. (35.4 l) ported enclosure.   General Specifications Continuous Power Handling 500W RMS Recommended Amplifier Power 150- 500W RMS Nominal Impedance 2Ω JL Audio 10W3v3 Manual

    2 Available for pickup

    $399.99$199.99

  • Sale -$50.00 JL Audio 12W0v3 : 12-Inch 300-Watt Subwoofer Driver, 4-Ohm SVC, front side view. 300W 12" Subwoofer Driver, 4Ω Single Voice Coil : JL Audio 12W0v3

    JL Audio 12W0v3 : 300W 12" Subwoofer Driver, 4Ω Single Voice Coil - Open Box Clearance

    2 Available for pickup

    W0-Series 12-Inch 300-Watt Subwoofer Driver, 4-Ohm SVC The 12" W0v3 subwoofer driver by JL Audio delivers excellent efficiency, excursion capability and linearity. This 12" subwoofer comes with a price point under $150.00 while supporting a beefy 2 in. diameter voice coil and JL's patented Elevated Frame Cooling design for enhanced power handling and reliability. The JL Audio 12W0v3-4 sub is best used with amplifier power in the 75W - 300W range and is optimized to operate in a moderately sized 1.375 cu. ft. (38.9 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure. General Specifications Continuous Power Handling 300W RMS Recommended Amplifier Power 75W - 300W RMS Nominal Impedance 4Ω JL Audio 12W0v3 Manual

    2 Available for pickup

    $149.99$99.99

  • Sale -$80.00 JL Audio 12W1v3 : 12-Inch 300-Watt Subwoofer Driver, 2-Ohm or 4-Ohm SVC, front side view. 300W 12" Subwoofer Driver, 2Ω or 4Ω Single Voice Coil : JL Audio 12W1v3

    JL Audio 12W1v3 : 300W 12" Subwoofer Driver, 2Ω or 4Ω Single Voice Coil - Open Box Clearance

    4 Available for pickup

    W1-Series 12-Inch 300-Watt Subwoofer Driver, 2-Ohm or 4-Ohm SVC The 12" W1v3 automotive subwoofer driver by JL Audio is a lightweight 12-inch driver with excellent performance capabilities at a moderate 300-Watts. The design of the chassis allows an average mounting depth with no pole-vent on the back side of the magnet so the rear of the motor structure can be placed directly against an enclosure boundary. This 12" subwoofer can reproduce sub-bass with shocking extension and quality. The JL Audio 12W1v3-2 and 12W1v3-4 subwoofers are best used with an amplifier in the 75W - 300W range and is optimized to operate in a compact 1.10 cu. ft. (31.5 l) sealed enclosure.  General Specifications Continuous Power Handling 300W RMS Recommended Amplifier Power 75W - 300W RMS Nominal Impedance 2Ω JL Audio 12W1v3 Manual

    4 Available for pickup

    $249.99$169.99

  • Sale -$250.00Last One! JL Audio ACP108LG-W3v3 : 8" Powered Subwoofer Enclosure - 250W JL Audio ACP108LG-W3v3 : 8" Powered Subwoofer Enclosure, side view.

    JL Audio ACP108LG-W3v3 : 8" Powered Subwoofer Enclosure, 250W Ported - Open Box Clearance

    1 Available for pickup

    W3-Series 250-Watt Amplified 8-Inch Ported Subwoofer System With MicroSub+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes JL Audio's exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance W3v3 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency. Key to the enclosure’s performance is its efficient slot-ported design and precise tuning of its 8Wv3 subwoofer driver. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems. Note: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Amplifier power: Built-in DCD™ Class D amplifier (250 W @ 0.40 Ω)Nominal Impedance: 0.40 Ω Enclosure and Subwoofer Built in USA with global components.

 General Specifications Continuous Power Handling (RMS) Built-in amplifier 250 W @ 0.40 Ω System Nominal Impedance 0.40 Ω Input Voltage Range @ RCA Inputs 70 mV - 1.40 V RMS Input Voltage Range @ High-Level Inputs 280 mV - 5.4 V RMS Recommended Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 30 A (ATO or ATC) Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh JL Audio MicroSub+/PowerWedge+ Manual

    1 Available for pickup

    $599.99$349.99

  • Sale -$350.00Last One! JL Audio ACP110LG-TW1 : 10" Powered Thin Subwoofer Enclosure - 400W JL Audio ACP110LG-TW1 : 10" Powered Thin Subwoofer Enclosure, side view.

    JL Audio ACP110LG-TW1 : 10" Powered Thin Subwoofer Enclosure, 400W Ported - Open Box Clearance

    1 Available for pickup

    TW1-Series 400-Watt Amplified 10-Inch Ported Subwoofer System With MicroSub+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes JL's exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency. Key to the enclosure’s performance is its efficient slot-ported design and precise tuning of its 10TW1 subwoofer driver. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems. Note: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Amplifier power: Built-in DCD™ Class D amplifier (400 W @ 0.25 Ω)Nominal Impedance: 0.25 Ω General Specifications Continuous Power Handling (RMS) Built-in amplifier 400 W @ 0.25 Ω System Nominal Impedance 0.25 Ω Input Voltage Range @ RCA Inputs 70 mV - 1.40 V RMS Input Voltage Range @ High-Level Inputs 280 mV - 5.4 V RMS Recommended Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 30 A (ATO or ATC) Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh JL Audio MicroSub+/PowerWedge+ Manual

    1 Available for pickup

    $799.99$449.99

  • Sale -$130.00 JL Audio C2-690tx : 6x9" 3-Way Coaxial Speakers - 70W RMS JL Audio C2-690tx : 6x9" 3-Way Coaxial Speaker top side with no grille.

    JL Audio C2-690tx : 6x9" 3-Way Coaxial Speakers, 70W RMS - Open Box Clearance

    2 Available for pickup

    C2-Series 6x9" 70-Watt  3-Way Coaxial Speaker System The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs. The C2-690tx system features 6 x 9-inch (150 x 230 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. The 6 x 9-inch (150 x 230 mm) format is a direct fit in many vehicles. The Mid-Range driver is ferrofluid-cooled, with a 2-inch Mylar® cone diaphragm to smoothly bridge the gap between the woofer and the dome tweeter. Tweeters are mounted next to the mid-range driver and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles. Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair. General Specs Continuous Power Handling (RMS) 70 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 15 - 125 W / Ch. System Efficiency 93 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 53 Hz - 22 KHz ± 3 dB JL Audio C2-690tx Manual

    2 Available for pickup

    $279.99$149.99

  • Sale -$75.00Last One! JL Audio CP110-W0v3 : 10" Subwoofer Enclosure - 300W RMS 4Ω Ported JL Audio CP110-W0v3 : 10" Subwoofer Enclosure - 300W RMS 4Ω Ported, back side.

    JL Audio CP110-W0v3 : 10" Subwoofer Enclosure, 300W RMS 4Ω Ported - Open Box Clearance

    1 Available for pickup

    BassWedge-Series 10-Inch 300-Watt Enclosed Subwoofer System, 4Ω Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 75 - 300WNominal Impedance: 4 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No Physical Specifications External Width (W) 15.51 in / 394 mm External Height (H) 13.77 in / 350 mm External Depth (D1) 17.38 in / 441 mm External Top Surface Depth (D2) 14 in / 356 mm Net Weight 29 lb / 13.15 kg JL Audio CP110-W0v3 Brochure

    1 Available for pickup

    $199.99$124.99

  • Sale -$50.00Last One! JL Audio CP112-W0v3 : 12" Subwoofer Enclosure - 300W RMS 4Ω Ported JL Audio CP112-W0v3 : 12" Subwoofer Enclosure - 300W RMS 4Ω Ported, back side.

    JL Audio CP112-W0v3 : 12" Subwoofer Enclosure, 300W RMS 4Ω Ported - Open Box Clearance

    1 Available for pickup

    BassWedge-Series 12-Inch 300-Watt Enclosed Subwoofer System, 4Ω Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 75 - 300WNominal Impedance: 4 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No Physical Specifications External Width (W) 16.31 in / 414 mm External Height (H) 15.18 in / 386 mm External Depth (D1) 20.3 in / 516 mm External Top Surface Depth (D2) 15.75 in / 400 mm Net Weight 33.1 lb / 15 kg JL Audio CP112-W0v3 Brochure

    1 Available for pickup

    $249.99$199.99

  • Sale -$100.00Last One! JL Audio JD1000/1 : 1000W or 600W Mono Amplifier @ 2Ω or 4Ω JL Audio JD1000/1 : 1000W or 600W Mono Amplifier @ 2Ω or 4Ω, top side.

    JL Audio JD1000/1 : 1000W or 600W Mono Amplifier @ 2Ω or 4Ω - Open Box Clearance

    1 Available for pickup

    JD-Series Monoblock Amplifier, 1000-Watt @ 2-Ohm or 600-Watt @ 4-Ohm Designed to produce a serious 1000 watts into 2 ohms (14.4V, 1% THD), the JD1000/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. JL Audio's proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion. The JD1000/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.  The JD1000/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat. General Specifications @ 4 Ω 600 W RMS x 1 @ 3 Ω 800 W RMS x 1 @ 2 Ω 1000 W RMS x 1 Frequency Response 7 Hz - 500 Hz (+0, -1dB) S/N Ratio, referred to highest rated power >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >1000 / 50 Hz Damping Factor @ 2 Ω >500 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 80 A (AFS, AGU or MaxiFuse™) Filter Mode(s) Low-Pass only Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer No Filter Defeat Function No Infrasonic Filter No Bass Boost EQ Yes Output Polarity Switch No Remote Subwoofer Level Control Optional (RBC-1) Remote Bass EQ Boost Control No Pass-Through Preamp Output Buffered JL Audio JD1000/1 Manual

    1 Available for pickup

    $399.99$299.99

  • Sale -$80.00 JL Audio JD250/1 : 250W or 150W Mono Amplifier @ 2Ω or 4Ω JL Audio JD250/1 : 250W or 150W Mono Amplifier @ 2Ω or 4Ω, top side.

    JL Audio JD250/1 : 250W or 150W Mono Amplifier @ 2Ω or 4Ω - Open Box Clearance

    2 Available for pickup

    JD-Series Monoblock Amplifier, 250-Watt @ 2-Ohm or 150-Watt @ 4-Ohm Designed to produce a healthy 250 watts into 2 ohms (14.4V, 1% THD), the JD250/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. JL Audio's proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion. The JD250/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.  The JD250/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you easily set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat. General Specifications @ 4 Ω 150 W RMS x 1 @ 3 Ω 200 W RMS x 1 @ 2 Ω 250 W RMS x 1 Frequency Response 7 Hz - 500 Hz (+0, -1dB) S/N Ratio, referred to highest rated power >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >60 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >1000 / 50 Hz Damping Factor @ 2 Ω >500 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min.Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 30 A (AFS, AGU or MaxiFuse™) Filter Mode(s) Low-Pass only Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer No Filter Defeat Function No Infrasonic Filter No Bass Boost EQ Yes Output Polarity Switch No Remote Subwoofer Level Control Optional (RBC-1) Remote Bass EQ Boost Control No Pass-Through Preamp Output Buffered JL Audio JD250/1 Manual

    2 Available for pickup

    $229.99$149.99

  • Sale -$80.00 JL Audio JD400/4 : 100W or 75W 4ch Amplifier @ 2Ω or 4Ω JL Audio JD400/4 : 100W or 75W 4ch Amplifier @ 2Ω or 4Ω, top side.

    JL Audio JD400/4 : 100W or 75W 4ch Amplifier @ 2Ω or 4Ω - Open Box Clearance

    4 Available for pickup

    JD-Series 75-Watt x 4-Channel Class-D Full-Range Amplifier Utilizing JL Audio's exclusive NexD™ high-speed switching technologies, the JD400/4 amplifier is engineered to deliver loads of clean power, with excellent efficiency and low distortion. This little guy churns out 100 watts of audio from each of its four channels into 2 ohms (14.4V, 1% THD) and is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a whopping 200W x 2 into 4 ohms. The JD400/4’s controls can be found on the input panel of the amplifier, with all speaker and power connections located along the opposite end of the extruded aluminum chassis. Signal processing features include high or low-pass 12 dB / octave filters (defeatable) for each channel pair, with continuously variable frequency selection from 50-500 Hz, and dual-range, differential-balanced inputs capable of accepting line-level or speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard equipment. Onboard LED-clipping indicators are also included surrounding each input sensitivity control. This convenient feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. You will also find a set of buffered, pass-through preamp outputs on-board, so you can pass signals to another amplifier. General Specifications @ 4 Ω 75 W RMS x 4 @ 2 Ω 100 W RMS x 4 Bridged @ 4Ω 200 W RMS x 2 Frequency Response 12 Hz - 22 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >150 / 50 Hz Damping Factor @ 2 Ω >75 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 40 A (AFS, AGU or MaxiFuse™) Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers No Filter Defeat Function Yes Remote Level Control No Remote Level Modes N/A Channel Input Mode Switch Yes (2/4 ch.) Pass-Through Preamp Output Buffered Source Channel Selection for PreOuts No (always 2 Ch) JL Audio JD400/4 Manual

    4 Available for pickup

    $279.99$199.99

  • Sale -$80.00 JL Audio JD500/1 : 500W or 250W Mono Amplifier @ 2Ω or 4Ω JL Audio JD500/1 : 500W or 250W Mono Amplifier @ 2Ω or 4Ω, top side.

    JL Audio JD500/1 : 500W or 250W Mono Amplifier @ 2Ω or 4Ω - Open Box Clearance

    5 Available for pickup

    JD-Series Monoblock Amplifier, 500-Watt @ 2-Ohm or 250-Watt @ 4-Ohm Designed to produce a whopping 500 watts into 2 ohms (14.4V, 1% THD), the JD500/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. JL Audio's proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion. The JD500/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.  The JD500/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat. General Specifications @ 4 Ω 250 W RMS x 1 @ 3 Ω 350 W RMS x 1 @ 2 Ω 500 W RMS x 1 Frequency Response 7 Hz - 500 Hz (+0, -1dB) S/N Ratio, referred to highest rated power >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >60 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >1000 / 50 Hz Damping Factor @ 2 Ω >500 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™) Filter Mode(s) Low-Pass only Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer No Filter Defeat Function No Infrasonic Filter No Bass Boost EQ Yes Output Polarity Switch No Remote Subwoofer Level Control Optional (RBC-1) Remote Bass EQ Boost Control No Pass-Through Preamp Output Buffered JL Audio JD500/1 Manual

    5 Available for pickup

    $279.99$199.99

  • Sale -$200.00Last One! JL Audio MX500/4 : 70W x 4ch Marine Amplifier @ 4Ω JL Audio MX500/4 : 70W x 4ch Marine Amplifier, side view,

    JL Audio MX500/4 : 70W x 4ch Marine Amplifier @ 4Ω - Open Box Clearance

    1 Available for pickup

    MX-Series 4-Channel Marine-Grade Amplifier, 125-Watts x 4ch @ 2-Ohm or 70-Watts x 4ch @ 4-Ohm Engineered specifically for powersports applications, the 4-channel MX500/4 amplifier employs JL's high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles. Generating a solid 70W x 4 into 4 ohms (14.4V, 1% THD), the MX500/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 250W x 2 into 4 ohms. Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals. This amplifier features a black powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability. Specifications Frequency Response 20 Hz - 20 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >88 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >70.5 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >92 / 50 Hz Damping Factor @ 2 Ω >43 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™) @ 4 Ω 70 W RMS x 4 @ 2 Ω 125 W RMS x 4 Bridged @ 4Ω 250 W RMS x 2 JL Audio MX500/4 Manual

    1 Available for pickup

    $449.99$249.99

  • Sale -$130.00Last One! JL Audio RD500/1 : 500W Monoblock Amplifier @ 2Ω JL Audio RD500/1 : 500W Monoblock Amplifier, top side.

    JL Audio RD500/1 : 500W Monoblock Amplifier @ 2Ω - Open Box Clearance

    1 Available for pickup

    RD-Series 500-Watt Monoblock Subwoofer Amplifier @ 2-Ohms Born to produce a whopping 500 watts into 2 ohms (14.4V, 1% THD), the RD500/1 amplifier was engineered to generate tons of pure subwoofer bliss from a sleek, ultra-compact chassis. The secret behind its power proficiency is JL's proprietary NexD™ switching technology, which delivers large amounts of power output with precise efficiency and ultra-low distortion. For your convenience, the RD500/1’s controls are located on top of the amplifier, beneath a protective cover, with all connections found along one side of its chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting most input voltage levels. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier. The RD500/1 is also equipped with an onboard LED-clipping indicator. This all-new, innovative feature lets you easily set your amplifier’s input sensitivity setting, quickly and accurately, with no special equipment needed. The RD500/1 features a durable, black powder-coated finish and a top-mounted, dual-color LED light strip that reports the overall status and condition. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer output directly from the driver’s seat. Specifications Frequency Response 7 Hz - 500 Hz (+0, -1dB) S/N Ratio, referred to highest rated power >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >60 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >1000 / 50 Hz Damping Factor @ 2 Ω >500 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™) @ 4 Ω 250 W RMS x 1 @ 3 Ω 350 W RMS x 1 @ 2 Ω 500 W RMS x 1 @ 1.5 Ω N/A JL Audio RD500/1 Manual

    1 Available for pickup

    $379.99$249.99

  • Sale -$45.00Last One! 400W 10" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 43CWR10 400W 10" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 43CWR10, rear view.

    Kicker 43CWR10 : 400W 10" Subwoofer Driver, 4Ω Dual Voice Coil - Discontinued

    1 Available for pickup

    10-Inch 400-Watt Subwoofer Driver, 4-Ohm DVC  The 43CWR10 10" subwoofer by Kicker has an advanced suspension system that includes a ribbed polypropylene surround and a large-diameter spider for linear movement, and a distortion-free sound. Bigger magnets, a thicker cone and an improved suspension system help make this 10-Inch 400W CompR sub to be a workhorse of a driver.The Kicker 43CWR104 12" sub work best with a sealed or ported enclosure and 400 watts of recommended power. Specifications SIZE [in, cm]: 10, 25 IMPEDANCE [Ohms]: 4 DVC Recommended Amplifier Power (watts RMS) 400 Peak Power (watts, per ANSI/CTA-2031-A) 800 SENSITIVITY [dB 1w/1m]: 84.6 MOUNTING DEPTH [in, cm]: 5-1/4, 13.3 MOUNTING DIAMETER [in, cm]: 9-1/8, 23.1 MIN SEALED BOX VOL [cu. ft, L]: 0.8, 22.7 MAX SEALED BOX VOL [cu. ft, L]: 1.25, 35.4 MIN VENTED BOX VOL [cu. ft, L]: 1.25, 35.4 MAX VENTED BOX VOL [cu. ft, L]: 1.75, 49.6 Kicker CompR Subwoofer Manual

    1 Available for pickup

    $129.99$84.99

  • Sale -$55.00Last One! 500W 12" Subwoofer Driver, 2Ω or 4Ω DVC : Kicker 43CWR12 500W 12" Subwoofer Driver, 2Ω or 4Ω DVC : Kicker 43CWR12, rear view.

    Kicker 43CWR12 : 500W 12" Subwoofer Driver, 4Ω DVC - Discontinued

    1 Available for pickup

    12-Inch 500-Watt Subwoofer Driver, 4-Ohm DVC The 43CWR12 12" subwoofer by Kicker has an advanced suspension system that includes a ribbed polypropylene surround and a large-diameter spider for linear movement, and a distortion-free sound. Bigger magnets, a thicker cone and an improved suspension system help make this 12-Inch 500W CompR sub to be a workhorse of a driver.The Kicker 43CWR124 12" sub work best with a sealed or ported enclosure and 500 watts of recommended power. Specifications SIZE [in, cm]: 12, 30 IMPEDANCE [Ohms]: 4 DVC Recommended Amplifier Power (watts RMS) 500 Peak Power (watts, per ANSI/CTA-2031-A) 1000 SENSITIVITY [dB 1w/1m]: 86.9 MOUNTING DEPTH [in, cm]: 5 3/4, 14.6 MOUNTING DIAMETER [in, cm]: 11, 27.9 MIN SEALED BOX VOL [cu. ft, L]: 1.0, 28.3 MAX SEALED BOX VOL [cu. ft, L]: 2.0, 56.64 MIN VENTED BOX VOL [cu. ft, L]: 1.75, 49.6 MAX VENTED BOX VOL [cu. ft, L]: 2.25, 63.7 Kicker CompR Subwoofer Manual

    1 Available for pickup

    $149.99$94.99

  • Sale -$60.00Last One! Kicker 43CWRT8 : 300W 8" Thin Subwoofer Driver, 2Ω Dual Voice Coil Kicker 43CWRT8 : 300W 8" Thin Subwoofer Driver, 2Ω Dual Voice Coil, front side.

    Kicker 43CWRT8 : 300W 8" Thin Subwoofer Driver, 2Ω Dual Voice Coil - Discontinued

    1 Available for pickup

    8-Inch 300-Watt Thin Subwoofer Driver, 2-Ohm DVC The CompRT 8" thin subwoofer by Kicker is a weather resistant thin sub with a 2Ω dual voice coil design. This thin 8 inch sub magnet structure delivers 300W RMS of power with a chassis mounting depth of just under 2 3/4". The Kicker designed UniPlate™ back plate and solid pole piece serve as a single heat-absorbing unit to keep this 8" CompRT thin subwoofer driver nice and cool.The CompRT 8-Inch subwoofer works best with a sealed or ported enclosure and 300 watts of recommended power. Specifications SIZE [in, cm]: 8, 20 IMPEDANCE [Ohms]: 2 DVC Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 SENSITIVITY [dB 1w/1m]: 81.8 MOUNTING DEPTH [in, cm]: 2 11/16, 6.7 MOUNTING DIAMETER [in, cm]: 7, 17.7 MIN SEALED BOX VOL [cu. ft, L]: 0.2, 5.66 MAX SEALED BOX VOL [cu. ft, L]: 1.0, 28.32 MIN VENTED BOX VOL [cu. ft, L]: 0.8, 22.7 MAX VENTED BOX VOL [cu. ft, L]: 1.2, 34 Kicker CompR Subwoofer Manual

    1 Available for pickup

    $159.99$99.99

  • Sale -$40.00Last One! 300W 12" Subwoofer Driver, 4Ω Single or Dual Voice Coil : Kicker 44CWC 300W 12" Subwoofer Driver, 4Ω Single or Dual Voice Coil : Kicker 44CWC, side view.

    Kicker 44CWC : 300W 12" Subwoofer Driver, Dual Voice Coil - Discontinued

    1 Available for pickup

    12-Inch 300-Watt Subwoofer Driver, 4-Ohm SVC or 4-Ohm DVC This CompC 12" sub driver from Kicker has a thick stamped steel basket that holds an injection-molded polypropylene cone with stabilizing ribs in the surround. The 44CWCS124 and 44CWCD124 12-Inch subs are available in a 4Ω Single Voice or 4Ω Dual Voice coil design with spring loaded speaker terminals. These CompC drivers are rated for 300W RMS of amplified power. Specifications Size (IN.,CM) 12, 30 Impedance (OHMS) 4 SVC or 4 DVC Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 Sensitivity (dB 1w/1m) 88.3 Frequency Response (Hz) 27-500 Mounting Depth (in, cm) 5-3/8, 13.6 Mounting Cutout (in, cm) 11, 27.9 Min Sealed Box Vol (cu. ft, L) 1.25, 35.4 Max Sealed Box Vol (cu. ft, L) 3.5, 99.1 Min Vented Box Vol (cu. ft, L) 1.75, 49.6 Max Vented Box Vol (cu. ft, L) 2.25, 63.7 Kicker CompC Subwoofer Manual

    1 Available for pickup

    $119.99$79.99

  • Sale -$65.00Last One! Momento MD-6200 : 1080HD WiFi Front and Rear Dash Camera Recording System Momento MD-6200 : 1080HD WiFi Front and Rear Dash Camera Recording System, front camera.

    Momento MD-6200 : 1080HD WiFi Front and Rear Dash Camera Recording System

    1 Available for pickup

    M6-Series High-Definition Front and Rear Facing Dash-Camera Recording-System with WiFi-Connectivity Wi-Fi enabled Full HD (1080p) dash camera system including front camera, rear camera, GPS antenna, and 32GB micro-SD memory card. Protection On and Off the RoadThe Momento M6 is a smart dash cam that provides 270° of surveillance coverage – and records footage that you can view from the Momento smartphone app! What is a "Smart" Dash Cam?The M6 is Momento’s first dash cam that connects to your smartphone by creating a small and secure Wi-Fi hotspot inside your vehicle that only you can access through the Momento App.  In addition to giving you easy access to your video files, the Momento App also provides additional driving insights such as speed, location and trip data. An Extra Set of Eyes On the RoadYou’re a safe, responsible driver, but accidents happen: Luckily, Momento’s got you covered: Driving Mode - Continuously records everything at the front and rear of your vehicle while driving. Impact Sensors - Stores 15 seconds before and after any impact or shock your vehicle experiences. Parking Mode - Even when you're parked, the M6 has motion sensors that trigger recordings. Exceptional Low-light SensitivityThe M6 records in Full HD, giving you crystal clear footage in 1080p. Additionally, the M6 is equipped with a Sony Exmor-R image sensor that is enhanced with STARVIS, the industry-standard for surveillance applications, ensuring low-light performance. Massive Upgradeable StorageThe M6 includes a 32GB micro-SD card that can be upgraded to any Class 10 micro-SD card up to 256GB. That’s twice as much as our leading competitors! Plus, its easy-to-use file management system best utilizes your storage while ensuring your most important videos stay saved. IMPORTANT NOTE:High-capacity SD cards require specific formatting in order to work with the Momento M6. 2-Year WarrantyThe M6 is protected by a 2-Year manufacturer’s Warranty. This warranty covers both front and rear cameras, and protects your purchase from defects or malfunctioning parts*. *Does not cover labor nor installation.

    1 Available for pickup

    $314.99$249.99

  • Sale -$15.40 Omega RS-170-B : Factory Remote Controlled 3X Lock Start, Key Start Vehicles Omega RS-170-B : Factory Remote Controlled 3X Lock Start, remote start brain.

    Omega RS-170-B : Factory Remote Controlled 3X Lock Start Bundle, Key Start Vehicles

    18 Available for pickup

    Omega Add-on Customizable Remote Start System for Select Key-Turn-Start Vehicles, Operated with Factory Remote Activates from almost any existing keyless entry or security system Includes status light and override switch Remote start compatible with gas or diesel engines! Selectable engine run times! Low voltage & low temp auto starting Rear defrost activation output Turbo timer - 1, 2, or 3 minute run time! Enhanced audible remote start diagnostics VIRTUAL ALARM Flashing light output. Optional anti-grind feature to protect your starter. Silent pit-stop operation 2 data ports -- auto-detects protocol! RK-Kit upgrade compatible Linkr-LT compatible Limited Lifetime warranty on all components. Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

    18 Available for pickup

    $61.59 - $561.58

  • Sale -$25.60 Omega RS-276-3D : 2-Way 1-Button Remote Start - 3000' Range Omega RS-276-3D : 2-Way 1-Button Remote Start, KO bypass module.

    Omega RS-276-3D : 2-Way 1-Button Remote Start Bundle - 3000' Range

    36 Available for pickup

    1-Button 2-Way Battery Operated Remote Start and Keyless Entry System with 3000-Feet of Range One 1-button 2-way controller, one 1-button 1-way controller 3D motion sensor for manual transmission safety Onboard temp sensor Low current RS harness available (P/N: H-RS6BLC) 5 onboard relays for maximum flexibility Dual data ports Limited lifetime warranty on all components Vehicle learn – auto-matches ignition switch sequence! Auto-detects optimal crank time in tachless mode Low temp auto crank adjust Low/high temp auto start Low voltage auto start Supports iDatalink & DBI protocols Human panic horn honk alert Remote start timer Stick shift compatible Turbo timer Run time extender Simultaneous horn, hank, & siren alert XL pit stop mode – runs for 12 hours The RS-276-3D offers the latest in security and convenience technology. When upgraded with Omega’s ECHO 2-way technology, you can keep the status of your vehicle right at your fingertips! Intuitive ECHO upgrade reporting gives you real-time alerts for all security and convenience functions. The built-in remote start capability will keep your vehicle warm in the winter and cool in the summer. Our state-of-the-art vehicle security platform offers unsurpassed vehicle protection that can only be offered by Excalibur’s 30+ year legacy.

    36 Available for pickup

    $102.39 - $602.38

  • Sale -$29.00 Omega RS-475-3D : 2-Way Multi-Button Remote Start - 3000' Range Omega RS-475-3D : 2-Way Multi-Button Remote Start, with KO bypass module.

    Omega RS-475-3D : 2-Way Multi-Button Remote Start Bundle - 3000' Range

    6 Available for pickup

    Deluxe Battery Powered LED 2-Way Remote Start & Keyless Entry System, with 3000-Feet of Range Qty 1 - Omega Excalibur RS-475-3D Remote Start 2-way LED controller included 4-button, 1-way transmitter included  Up to 3,000 ft of range ECHO compatible Multi-vehicle capability Powered by the RS-X70 module 3D motion sensor for manual transmission safety Dual data ports - now auto-detect protocol independently Vehicle Learn Mode - faster than programming! Self-diagnoses RS connections Low Vehicle Battery Alert Full Security Suite built-in Random Horn Honk Alert Data shock sensor compatible Displays vehicle interior temp on remote Stick shift compatible XL Pit Stop Mode - runs for 12 hours The RS-475-3D offers the latest in security and convenience technology. Equipped with Omega’s ECHO 2-way technology, you can keep the status of your vehicle right at your fingertips from up to 3,000 feet away! Intuitive reporting gives you real-time alerts for all security and convenience functions. The built-in remote start capability will keep your vehicle warm in the winter and cool in the summer. Our state-of-the-art vehicle security platform offers unsurpassed vehicle protection that can only be offered by Excalibur’s 30+ year legacy. Qty 1 - Omegalink Transponder Bypass Module Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

    6 Available for pickup

    $115.99 - $615.98

  • Sale -$65.40 Omegalink LINKR-LT2 : Cellular Controlled Remote Start with GPS and GEO Tracking Omegalink LINKR-LT2 : Cellular Controlled Remote Start with GPS and GEO Tracking, brain.

    Omegalink LINKR-LT2 : Cellular Controlled Remote Start Bundle, with GPS and GEO Tracking

    18 Available for pickup

    Smartphone Controlled Auto Remote Start and Vehicle Tracking System Qty 1 - LINKR-LT2 Cellular Tower Range 2-Way Remote Alarm trigger alert Lock your vehicle Unlock your vehicle Remote start/stop (optional remote start required) Run time extender command Trunk release Control multiple devices from one app Locate on demand Compatible with Android and iOS Supports multiple Linkr-LT2 devices (virtually no limit) Choose custom images & names for each device Installer setup & test is done directly from the App. PC not required. 1 trigger input (alarm alert) Dedicated data port interface for any 70 series Excalibur system (requires v1.4 firmware or higher) - Uses iDatalink protocol Plugs into any OmegaLink data start kit Compatible with OmegaEVO, Fortin, Directed data starts, ADS/iDatalink data starts, Compustar, & more! The 1st year of service is included! (2nd year is $39.95 USD). - Subject to Change. Qty 1 - Omega Excalibur RS-170-B - Add-on Customizable Remote Start System Activates from almost any existing keyless entry or security system Includes status light and override switch Remote start compatible with gas or diesel engines! Selectable engine run times! Low voltage & low temp auto starting Rear defrost activation output Turbo timer - 1, 2, or 3 minute run time! Enhanced audible remote start diagnostics VIRTUAL ALARM Flashing light output. Optional anti-grind feature to protect your starter. Silent pit-stop operation 2 data ports -- auto-detects protocol! RK-Kit upgrade compatible Linkr-LT compatible Limited Lifetime warranty on all components. Qty 1 - Omegalink Blade Style Remote Start Bypass Module Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

    18 Available for pickup

    $191.58 - $691.57

  • Sale -$37.00 Omegalink OL-RS-BA with Installation : Standalone Remote Start System with T-Harness

    Omegalink OL-RS-BA : Standalone Remote Start System Bundle with T-Harness

    20 Available for pickup

    Automotive Remote Start System for Select Vehicles The OL-RS-BA is the ultimate remote start solution designed to maximize the use of the original key fob, transmitter or smart key. Simply press the Lock button 3 times to remote start and stop the engine. Instantly upgrade your OL-RS-BA system with long range RF extender kits or smartphone control with LinkR sold separately. Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system Click Here to View Vehicle Coverage Information

    20 Available for pickup

    $147.99 - $693.58

  • Sale -$33.40 Omegalink OL-RS-CH10 : Standalone Remote Start System Omegalink OL-RS-CH10 : Standalone Remote Start System, 1 button remote.

    Omegalink OL-RS-CH10 : Standalone Remote Start System Bundle, Chrysler, Dodge, Fiat, Jeep, RAM

    10 Available for pickup

    Web-Programmable Remote Start Solution for Select Chrysler, Dodge, Fiat, Jeep, RAM Vehicles Qty 1 - Omegalink OL-RS-CH10 - RF Style Add-on Remote Start System The OL-RS-CH10 is a web-programmable, standalone remote start solution for Chrysler non-‘Tipstart’ models 2011 and up. Supports remote start from factory transmitter by pressing 3 X LOCK. Includes custom t-harness for ‘plug & play’ installation. Can be paired with compatible range extender kit sold separately. NOTE: This system does not have firmware loaded when new. It must be flashed by an authorized Omega Dealer before installation is possible. Note: Features may vary depending on vehicle year, make, and model. Please consult your installer for more information. Click Here to View Vehicle Coverage Information Features: Downloadable Software Feature Selection Advanced Feature Programming V2 Door Lock Priority Unlock Door Unlock Trunk/Hatch Release Arm OEM Alarm Disarm OEM Alarm Aftermarket Alarm Ctrl from OEM remotes Horn Ctrl (wire) Door Stat Output Trunk Stat Output Data Immobilizer Bypass Parking Light Ctrl Tachometer Output Brake Pedal Stat Output E-Brake Output RAP Shutdown Ctrl Data/MUX Keysense Ctrl Data/MUX Accessory Ctrl Data/MUX Ignition Ctrl Data/MUX Starter Ctrl 3XLOCK start w/ standalone module Qty 1 - Your choice of Extended Range Remote Control None - 1-Way Operation with factory key fab by pressing the Lock Button 3 times. - Limited to Factory Fab Operating Range OL-RF-15-SST - 2-Way 1-Button Add-on RF Style Remote Start Remote Control - 3000' Range OL-RF-42-SST - 2-Way 5-Button Add-on RF Style Remote Start Remote Control - 3000' Range CarLink - Add-on RF Style Cellular Remote Start Remote Control - 1.5 Mile Range LINKR-LT2 - Add-on Cellular Remote Start Controller, data plan required - Cell Tower Range Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

    10 Available for pickup

    $133.59 - $691.98

  • Sale -$23.79 Omegalink OL-RS-CH4 : Standalone Remote Start System Installation Bundle Omegalink OL-RS-CH4 : Standalone Remote Start System, 1 button remote.

    Omegalink OL-RS-CH4 : Standalone Remote Start System Bundle, for Chrysler, Dodge, Jeep, RAM, VW

    20 Available for pickup

    Web-Programmable Remote Start Solution for Select Chrysler, Dodge, Jeep, RAM and VW Vehicles Qty 1- Omegalink OL-RS-CH4 Chrysler/Dodge/Jeep/RAM/VW RF Style Remote Start The OL-RS-CH4 is a web-programmable, standalone remote start solution for Chrysler ‘Tipstart’ models 2008 and up. Supports remote start from factory transmitter by pressing 3 X LOCK. Includes custom t-harness for ‘plug & play’ installation. Can be paired with compatible range-extender kit sold separately.  NOTE: This system does not have firmware loaded when new. It must be flashed by an authorized Omega Dealer before installation is possible. Click Here to View Vehicle Coverage Information Note: Features may vary depending on vehicle year, make, and model. Please consult your installer for more information. Downloadable Software Feature Selection Advanced Feature Programming V2 Door Lock Priority Unlock Door Unlock Trunk/Hatch Release Arm OEM Alarm Disarm OEM Alarm Aftermarket Alarm Ctrl from OEM remotes Horn Ctrl (wire) Door Stat Output Trunk Stat Output Data Immobilizer Bypass Parking Light Ctrl Tachometer Output Brake Pedal Stat Output E-Brake Output RAP Shutdown Ctrl Data/MUX Keysense Ctrl Data/MUX Accessory Ctrl Data/MUX Ignition Ctrl Data/MUX Starter Ctrl 3XLOCK start w/ standalone module Qty 1 - Your choice of Extended Range Remote Control None - 1-Way Operation with factory key fab by pressing the Lock Button 3 times. - Limited to Factory Fab Operating Range OL-RF-15-SST - 2-Way 1-Button Add-on RF Style Remote Start Remote Control - 3000' Range OL-RF-42-SST - 2-Way 5-Button Add-on RF Style Remote Start Remote Control - 3000' Range CarLink - Add-on RF Style Cellular Remote Start Remote Control - 1.5 Mile Range LINKR-LT2 - Add-on Cellular Remote Start Controller, data plan required - Cell Tower Range Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

    20 Available for pickup

    $95.19 - $653.58

  • Sale -$23.79 Omegalink OL-RS-CH5 : Standalone Remote Start System Bundle Omegalink OL-RS-CH5 : Standalone Remote Start System Bundle, 1 button remote.

    Omegalink OL-RS-CH5 : Standalone Remote Start System Bundle, for Chrysler, Dodge, Jeep, RAM

    50 Available for pickup

    Web-Programmable Remote Start Solution for Select Chrysler, Dodge, Jeep and RAM Vehicles QTY 1 - Omegalink OL-RS-CH5 - Chrysler/Dodge/Jeep/RAM RF Style Remote Start System The OL-RS-CH5 is a web-programmable, standalone remote start solution for Chrysler non-‘Tipstart’ models 2005 and up. Supports remote start from factory transmitter by pressing 3 X LOCK. Includes custom t-harness for ‘plug & play’ installation. Can be paired with compatible range extender kit sold separately. NOTE: This system does not have firmware loaded when new. It must be flashed by an authorized Omega Dealer before installation is possible. Note: Features may vary depending on vehicle year, make, and model. Please consult your installer for more information. Click Here to View Vehicle Coverage Information Features: Downloadable Software Feature Selection Advanced Feature Programming V2 Door Lock Priority Unlock Door Unlock Trunk/Hatch Release Arm OEM Alarm Disarm OEM Alarm Aftermarket Alarm Ctrl from OEM remotes Horn Ctrl (wire) Door Stat Output Trunk Stat Output Data Immobilizer Bypass Parking Light Ctrl Tachometer Output Brake Pedal Stat Output E-Brake Output RAP Shutdown Ctrl Data/MUX Keysense Ctrl Data/MUX Accessory Ctrl Data/MUX Ignition Ctrl Data/MUX Starter Ctrl 3XLOCK start w/ standalone module Qty 1 - Your choice of Extended Range Remote Control None - 1-Way Operation with factory key fab by pressing the Lock Button 3 times. - Limited to Factory Fab Operating Range OL-RF-15-SST - 2-Way 1-Button Add-on RF Style Remote Start Remote Control - 3000' Range OL-RF-42-SST - 2-Way 5-Button Add-on RF Style Remote Start Remote Control - 3000' Range CarLink - Add-on RF Style Cellular Remote Start Remote Control - 1.5 Mile Range LINKR-LT2 - Add-on Cellular Remote Start Controller, data plan required - Cell Tower Range Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

    50 Available for pickup

    $95.19 - $653.58

  • Sale -$40.60 Omegalink OL-RS-F01 : Standalone Remote Start System Bundle, Omegalink OL-RS-F01 : Standalone Remote Start System Bundle,, 1 button remote.

    Omegalink OL-RS-F01 : Standalone Remote Start System Bundle, for Ford, Lincoln, Mazda, Mercury

    10 Available for pickup

    Web-Programmable Remote Start Solution for Select Ford, Lincoln, Mazda and Mercury Vehicles Qty 1 - Omegalink OL-RS-F01 - RF Style Add-on Remote Start System Remote start solution for selected Ford/Lincoln/Mercury/Mazda models 2006 and up. A compatible range-extender kit may be required and sold separately. The OL-RS-FO1 is a web-programmable, standalone remote start solution for selected Ford/Lincoln/Mercury/Mazda models 2006 and up. Includes custom t-harness for easy installation. A compatible range-extender kit may be required and sold separately. NOTE: This system does not have firmware loaded when new. It must be flashed by an authorized Omega Dealer before installation is possible. Click Here to View Vehicle Coverage InformationNote: Features may vary depending on vehicle year, make, and model. Please consult your installer for more information. Downloadable Software Feature Selection Advanced Feature Programming V2 Door Lock Door Unlock Trunk/Hatch Release Arm OEM Alarm Disarm OEM Alarm Horn Ctrl (wire) Door Stat Output Trunk Stat Output Data Immobilizer Bypass Hood Stat Output Parking Light Ctrl Tachometer Output Brake Pedal Stat Output E-Brake Output RAP Shutdown Ctrl 3XLOCK start w/ standalone module Qty 1 - Your choice of Extended Range Remote Control None - 1-Way Operation with factory key fab by pressing the Lock Button 3 times. - Limited to Factory Fab Operating Range OL-RF-15-SST - 2-Way 1-Button Add-on RF Style Remote Start Remote Control - 3000' Range OL-RF-42-SST - 2-Way 5-Button Add-on RF Style Remote Start Remote Control - 3000' Range CarLink - Add-on RF Style Cellular Remote Start Remote Control - 1.5 Mile Range LINKR-LT2 - Add-on Cellular Remote Start Controller, data plan required - Cell Tower Range Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

    10 Available for pickup

    $162.39 - $720.78

  • Sale -$36.00 Omegalink OL-RS-GM10 : Standalone Remote Start System Bundle, Omegalink OL-RS-GM10 : Standalone Remote Start System Bundle, 1 button remote.

    Omegalink OL-RS-GM10 : Standalone Remote Start System Bundle, for GM Vehicles

    20 Available for pickup

    Web-Programmable Remote Start Solution for Select GM Vehicles Qty 1 - Omegalink OL-RS-GM10 - RF Style Remote Start System Remote start solution for GM 'SWC' full-size models 2006 and up. Supports remote start from factory transmitter by pressing 3 X LOCK. The OL-RS-GM10 is a web-programmable, standalone remote start solution for GM 'SWC' full-size models 2006 and up. Supports remote start from factory transmitter by pressing 3 X LOCK. Includes custom t-harness for ‘plug & play’ installation. Can be paired with compatible range extender kit sold separately. Click Here to View Vehicle Coverage Information NOTE: This system does not have firmware loaded when new. It must be flashed by an authorized Omega Dealer before installation is possible. Note: Features may vary depending on vehicle year, make, and model. Please consult your installer for more information. Downloadable Software Feature Selection Advanced Feature Programming V2 Door Lock Priority Unlock Door Unlock Trunk/Hatch Release Power Liftgate Tailgate Window Release Arm OEM Alarm Disarm OEM Alarm Aftermarket Alarm Ctrl from OEM remotes Horn Ctrl (wire) Door Stat Output Trunk Stat Output Heated Seat Ctrl Data Immobilizer Bypass Hood Stat Output Tachometer Output Brake Pedal Stat Output E-Brake Output RAP Shutdown Ctrl 3XLOCK start w/ standalone module Qty 1 - Your choice of Extended Range Remote Control None - 1-Way Operation with factory key fab by pressing the Lock Button 3 times. - Limited to Factory Fab Operating Range OL-RF-15-SST - 2-Way 1-Button Add-on RF Style Remote Start Remote Control - 3000' Range OL-RF-42-SST - 2-Way 5-Button Add-on RF Style Remote Start Remote Control - 3000' Range CarLink - Add-on RF Style Cellular Remote Start Remote Control - 1.5 Mile Range LINKR-LT2 - Add-on Cellular Remote Start Controller, data plan required - Cell Tower Range Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

    20 Available for pickup

    $145.99 - $703.98

  • Sale -$33.00 Omegalink OL-RS-GM7 : Standalone Remote Start System Bundle Omegalink OL-RS-GM7 : Standalone Remote Start System Bundle, one button remote.

    Omegalink OL-RS-GM7 : Standalone Remote Start System Bundle, for Buick, Chevy, GMC

    20 Available for pickup

    Web-Programmable Remote Start Solution for Select Buick, Chevy, GMC Vehicles Qty 1 - Omegalink OL-RS-GM7 RF Style Remote Start System The OL-RS-GM7 is a web-programmable, standalone remote start solution for GM 'flip-key' models 2010 and up. Includes custom t-harness for ‘plug & play’ installation. A compatible range-extender kit is required and sold separately. NOTE: This system does not have firmware loaded when new. It must be flashed by an authorized Omega Dealer before installation is possible. Note: Features may vary depending on vehicle year, make, and model. Please consult your installer for more information. Click Here to View Vehicle Coverage Information Downloadable Software Feature Selection Advanced Feature Programming V2 Door Lock Priority Unlock Door Unlock Trunk/Hatch Release Power Liftgate Tailgate Window Release Arm OEM Alarm Disarm OEM Alarm Aftermarket Alarm Ctrl from OEM remotes Horn Ctrl (wire) Door Stat Output Trunk Stat Output Heated Seat Ctrl Data Immobilizer Bypass Hood Stat Output Tachometer Output Brake Pedal Stat Output E-Brake Output RAP Shutdown Ctrl 3XLOCK start w/ standalone module Qty 1 - Your choice of Extended Range Remote Control None - 1-Way Operation with factory key fab by pressing the Lock Button 3 times. - Limited to Factory Fab Operating Range OL-RF-15-SST - 2-Way 1-Button Add-on RF Style Remote Start Remote Control - 3000' Range OL-RF-42-SST - 2-Way 5-Button Add-on RF Style Remote Start Remote Control - 3000' Range CarLink - Add-on RF Style Cellular Remote Start Remote Control - 1.5 Mile Range LINKR-LT2 - Add-on Cellular Remote Start Controller, data plan required - Cell Tower Range Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

    20 Available for pickup

    $131.99 - $690.38

  • Sale -$150.00 Pioneer AVH-3500NEX : 6.8" DIN Size BT CD/DVD Stereo, SXM Pioneer AVH-3500NEX : 6.8" DIN Size BT CD/DVD Stereo, CarPlay screen.

    Pioneer AVH-3500NEX : 6.8" DIN Size BT CD/DVD Stereo, SXM

    Pre-Order Today!

    DIN-Size with Hideaway 6.8-Inch Touchscreen Digital CD and DVD Media Receiver with Bluetooth, Apple CarPlay and Android Auto Pioneer's NEX or Networked Entertainment eXperience line of receivers features an innovative and powerful new user interface that is responsive and highly customizable. The NEX models are designed especially for today's smartphone driven lifestyle. Vozsis is a smartphone app available for both iOS and Android OS devices that brings Amazon Alexa capability to compatible Weblink-enabled Pioneer multimedia in-dash receivers. Downloading both the Vozsis and Weblink applications makes using Alexa in your car simple – just tap-and-ask, and Alexa will respond instantly. With Alexa, you can ask to play music, hear the news, check weather, control smart home devices, and more. Alexa lives in the cloud, so it’s always getting smarter, adding new capabilities that are delivered to your device automatically. The AVH-3500NEX features Apple CarPlay, the smarter, safer and more fun way to use your iPhone in the car. Apple CarPlay gives iPhone users an incredibly intuitive way to make calls, use maps, listen to music, and verbally send and listen to messages with just a word or a touch. Apple CarPlay requires iPhone 5 or newer with the latest version of iOS. The AVH-3500NEX also features Android Auto, which extends the Android platform into the car in a way that’s purpose-built for driving. Android Auto automatically brings you useful information and organizes it into simple cards that appear just when they’re needed. It’s designed to minimize distraction so you can stay focused on the road ahead. Stay safe and obey local hands-free laws with built-in bluetooth (HFP). Easily pair a bluetooth enabled phone to the AVH-3500NEX without having to go through complicated settings. When a registered bluetooth device is in proximity to the receiver, the auto connection function automatically pairs the two units. From hands-free calling, wireless audio streaming (A2DP) with artist, album, and song search, simple pairing, and control audio (AVRCP profile), bluetooth wireless technology has made life in the vehicle much more convenient. The AVH-3500NEX with bluetooth also includes superior call quality reception using Wideband Speech Handsfree Profile 1.6. Wideband Speech nearly doubles the bandwidth of frequencies of a normal Bluetooth call (when compared to calls without Wideband Speech) Pandora is personalized internet radio that is designed to help you discover new music that you'll love mixed in with music that you already know. With the AVH-3500NEX, you can enjoy superior sound quality and full control of the Pandora experience in your car directly from the touchscreen display of the receiver. You are able to give tracks "thumbs up" or "thumbs down," bookmark a song so you can purchase it later, easily switch between your personalized radio stations, and view full track data and album art. Pandora is compatible with Apple iOS, as well as Android devices that support the Bluetooth Serial Port Profile (SPP). Simply download the free Pandora Radio app to your iPhone or Android device, connect to the AVH-3500NEX and take your music to the next level. The AVH-3500NEX is SiriusXM ready so you can get over 140 channels, including commercial-free music, plus the best sports and live events, comedy, news, exclusive talk and entertainment. SiriusXM programming is received through the SiriusXM Connect Vehicle Tuner (sold separately, SiriusXM subscription required). Users of an iPhone with Siri can take advantage of Siri Eyes Free functionality. With a simple touch of the NEX touchscreen, Siri starts listening through the NEX unit's external microphone and answers your questions and requests over the vehicle's speakers, helping you keep your eyes on the road and your hands on the wheel. Specifications Continuous Power Output 22 W x 4-Channel Load Impedence Allowance 4 Ohm (4 Ohm to 8 Ohm Allowable) Max Power Output 50 W x 4-ch 4 ohm / 50 W x 2-ch 4 ohm 70 W X 1-ch (subwoofer) 2 Ohm RCA Preamp Outputs 6-ch RCA Preout Voltage 4V RMS Power Output (CTA-2006) 14 W RMS x 4-ch 4 ohm Back LightLED Brightness Control Yes Color Customization 5 display colors, 112 key colors Device (Non-DIN/Modular Unit) 2-DIN Dimmer Automatic with vehicle illumination, Timer Controlled, Manual Display Off Mode Yes Home Screen Customization Yes Monitor Mechanism Fixed Resolution WVGA (800 x 480) Screen Size/Aspect Ratio 7"/16:9 Touch Screen Resistive Advanced Audio Distribution Profile (A2DP) Yes AVRCP 1.6 Built-in Bluetooth® Yes Dual Phone Connection Yes Hands-Free Yes Microphone Included Phone Registation 5-phone Secure Simple Pairing (SSP) Yes Serial Port Profile (SPP) Yes Sound Retriever Air Mode 1/Mode 2/Off Best Station Memory Yes Local Seek tuning Yes Presets 18 FM, 6 AM RDS Yes SiriusXM-Ready™ (Tuner Sold Separately) Yes Amazon Alexa Paired with Pioneer Vozsis Android Auto™ Wired USB Connection Apple® CarPlay Wired USB Connection Mirroring Android / Apple iOS Music Playback (MTP) Yes Pandora® Source through iPhone/Android Pioneer App Compatibility Vozsis Android, Vozsis iPhone Siri® Eyes Free (VR) (Internet Required) iPhone Only Spotify Streaming audio through iPhone/Android via Bluetooth or AUX input Voice Control Yes Weblink Yes Audio Playback via CD MP3 Audio Playback / WMA Audio Playback / AAC Audio Playback / CD Audio Playback Audio Playback via DVD AAC Audio Playback / MP3 Audio Playback / WMA Audio Playback Audio Playback via USB MP3 Audio Playback / WMA Audio Playback / AAC Audio Playback / FLAC Audio Playback (Hi-Res) / WAV Audio Playback (Hi-Res) Audio Video Playback via CD-R/CD-RW AVI Audio Video Playback / DivX Audio Video Playback / DVD Audio Video Playback Audio Video Playback via DVD-R/RSL/-RDL/DVD-RW AVI Audio Video Playback / DivX Audio Video Playback / DVD Audio Video Playback Audio Video Playback via USB .avi / .mpg/mpeg / .divx / .mp4 / .3gp / .mkv / .mov / .flv . .wmv/.asf / .m4v / .ts/.m2ts/.mts / H.263 / H.264 Image Display via USB BMP / JPEG / PNG Advanced Sound Retriever Mode-1/Mode-2/Off Bass Boost Yes Auto EQ (CD-MC20 Microphone sold separately) Yes Automatic Level Control Mode-1/Mode-2/Off Built-in Amplifier MOSFET 50 W x 4 Crossover Network Mode HPF/Band Pass/LPF Crossover Standard Mode HPF/LPF Customizable Graphic Equalizer 13 Band DA Converter 24 Bit Digital Signal Processor Built In Easy EQ (EEQ) Preset Equalizer Yes Listening Position Selector Yes Loudness High/Mid/Low/Off Speaker Output 4-ch Spectrum Analyzer Yes Subwoofer Control Yes Time AlignmentAuto / Manual Parking Assist Lines Yes RCA Video Output Yes USB Single Rear Type-A (5 V, 1.5 A) USB Direct Control for iPhone® Single Rear Type-A (5 V, 1.5 A) Input 1 Backup Camera Dedicated Input 2 AUX (Minijack) Input 3 AV Detachable Face Security Yes Multi-Language Display English, French, Spanish Portuguese, Chinese (Simplified) Music Browser USB Remote Control Included Rotary Volume Control Yes Steering Wheel Control Ready (Adapter Sold Separately) Yes Pioneer AVH-3500NEX ManualPioneer AVH-3500NEX Installation Manual

    Pre-Order Today!

    $699.99$549.99

  • Sale -$25.00 Voxx CarLink : 2-Way Cellular Remote Start Bundle Voxx CarLink : 2-Way Cellular Remote Start Bundle, remote control.

    Voxx CarLink : 2-Way Cellular Remote Start Bundle, 1 Mile Range, Key Turn Start Vehicles

    84 Available for pickup

    Smartphone Controlled Remote Start System for Select Key-Turn-Start Vehicles Qty 1 - Extreme Range CarLink 2-Way Remote From Voxx Electronics No monthly fees Connects via Bluetooth directly to the antenna and/or the long range remote True 2-way communication powered by LoRa™ technology Real-time Bluetooth® communication interaction with your smartphone with rapid response 2-way LED remote with over 1.5 miles of operating range Micro USB rechargeable Li-On battery (cable not included) Compatible with most digital remote start and security systems Compatible with android & iOS Smartphones Qty 1 - Omega Excalibur RS-170-B - Add-on Customizable Remote Start System Activates from almost any existing keyless entry or security system Includes status light and override switch Remote start compatible with gas or diesel engines! Selectable engine run times! Low voltage & low temp auto starting Rear defrost activation output Turbo timer - 1, 2, or 3 minute run time! Enhanced audible remote start diagnostics VIRTUAL ALARM Flashing light output. Optional anti-grind feature to protect your starter. Silent pit-stop operation 2 data ports -- auto-detects protocol! RK-Kit upgrade compatible Linkr-LT compatible Limited Lifetime warranty on all components. Qty 1 - Omegalink Blade Style Remote Start Bypass Module Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

    84 Available for pickup

    $199.98 - $699.97

  • Sale -$29.60 Voxx CarLink : 2-Way Cellular Remote Start Bundle, Voxx CarLink : 2-Way Cellular Remote Start with CarLink remote.

    Voxx CarLink : 2-Way Cellular Remote Start Bundle, 1 Mile Range, Push Button Start Vehicles

    28 Available for pickup

    Smartphone Controlled Remote Start System for Select Push-Button-Start Vehicles Qty 1 - Extreme Range CarLink 2-Way Remote From Voxx Electronics No monthly fees Connects via Bluetooth directly to the antenna and/or the long range remote True 2-way communication powered by LoRa™ technology Real-time Bluetooth® communication interaction with your smartphone with rapid response 2-way LED remote with over 1.5 miles of operating range Micro USB rechargeable Li-On battery (cable not included) Compatible with most digital remote start and security systems Compatible with android & iOS Smartphones Qty 1 - Omega OL-MDB-ALL - Add-on Customizable Remote Start Transponder Bypass Flashable Doorlock and Immobilizer Bypass module (KLON Compatible). Supports remote start from OEM remote by pressing the lock button 3x. Compatible with aftermarket RF kit for long range connectivity. Use with your existing Factory Remote. You will press the lock button 3-times on your factory remote to start your vehicle. Distance is limited by the distance of your factory remote. Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

    28 Available for pickup

    $218.38 - $638.38


You have seen 48 out of 50 products

Login

Forgot your password?

Don't have an account yet?
Create account