Automotive OEM Speaker Systems

300-Watt Door-Speaker and Add-On Subwoofer Kit for Select 2018-UP Jeep Wrangler-JL and Gladiator-JT Vehicles The PSS-24WRA is a 300-Watt Complete Sound System Upgrade Package for the four-door, non-amplified 2018–Up Jeep Wrangler-JL and non-amplified 2020–Up Jeep Gladiator-JT. Go beyond your wildest expectations for sound with this complete sound upgrade package. The PSS-24WRA has 5-channels of powered sound that replaces your factory system. The package includes two sets of 6.5” weather-resistant mid-bas drivers and 1” weather-resist tweeters that replace the front and rear soundbar factory speakers, an 8” powered, compact subwoofer and a 4-channel power pack amplifier. Specifications Complete, five-channel powered sound system upgrade package   Compatible with four-door, non-amplified 2018 - Up Jeep® Wrangler and non-amplified 2020 – Up Jeep® Gladiator Also compatible with two-door, non-scissor front seats in 2019 - Up Jeep® Wrangler Includes Alpine’s SPV-65X-WRA, SPV-65-JLT, PWE-S8, and KTP-445U  180W, 4-channel Power Pack amplifier  120W, 8” powered subwoofer  (2x) 6.5” weather-resistant mid-bass drivers  (2x) 1” weather-resistant teteron dome tweeters with vehicle-specific connectors and crossovers  Vehicle specific front speaker pods with vehicle-specific connectors  Tweeter adapter plates allow for use of the original factory tweeter locations  SPV-65-JLT weather-resistant rear soundbar speaker system Rugged, premium grills designed to emulate the factory look and appeal   Vehicle-specific connectors for plug-and-play speaker installation   Utilizes factory bolt locations   Durable stamped, steel frame speaker basket design  Includes template for mounting Vehicle specific T-harness for installation with OEM radio into compatible 2018 – Up Jeep® Wrangler and 2020 – Up Jeep® Gladiator vehicles  Vehicle specific mounting brackets allow for the powered sub and amp to be secured under the passenger seat without drilling  What's in the Box: KTP-445U Universal 4-Channel Power Amplifier  PWE-S8 8" Compact Powered Subwoofer  SPV-65X-WRA Front Component Speakers SPV-65-JLT Rear Sound Bar Speakers ALP-POD-JLT Front Speaker Pod PSU-BKT-JL-R PWE Right Bracket JL PSU-BKT-JL-L PWE Left Bracket JL ALP-HRN-PSU300 PSU Power Harness  ALP-THRN-CH2 Chrysler T-Harness  CT6 6" Cable Ties PHPSM412 Pan Head Phillips Screw M4x12 SLWM4 M4 Split Lock Washers PHSCR832 8-32 Pan Head Phillips screws PSS-WRA-IM Installation Manual Specifications Front (SPV-65X-WRA) Power handling: 75 watts RMS (225 watts peak)  Frequency response: 65kHz – 22kHz  Nominal impedance: 4 ohms  Weather-resistant: IP55   Rear (SPV-65-JLT) Power handling: 90 watts RMS (270 watts peak)  Frequency response: 50kHz – 22kHz  Nominal impedance: 4 ohms  Weather-resistant: IP55 Powered Subwoofer (PWE-S8) 120 watts RMS (240 watts peak)  Frequency response: 32 - 150Hz  Variable low-pass crossover (80-200 Hz)  Variable phase control (0-180 degrees)  preamp- and speaker-level inputs  Four Channel Power Pack Amplifier (KTP-445U) 45 watts RMS x 4 at 4 or 2 ohms  90 watts RMS x 2 bridged at 4 ohms  Selectable high-pass filters (60, 80, or 120 Hz at 12 dB/octave)  Switchable RCA or speaker-level inputs| Dimensions:  27” L x 18.5” W x 19.5” H 40lbs Direct fit for non-amplified 2018–Up 4-door Jeep Wrangler JL Unlimited Direct fit for non-amplified 2019–Up 2-door Jeep Wrangler Direct fit for non-amplified 2020–Up Jeep Gladiator JT Alpine PSS-24WRA Installation Manual

Read more less

Alpine 600-Watt Direct-Fit Weather-Resistant Powered Speaker-System with Built-in Subwoofer for 2011-2018 Jeep-Wrangler JK-Unlimited A premium sound system for your Jeep Wrangler JK Unlimited is. The PSS-22WRA is a 1200-watt, 9-speaker sound system for 2011-2018 Jeep Wrangler JK Unlimited, providing excellent sound performance with the top on or off.   Caught with the top off in inclement weather? Not to worry.  The PSS-22WRA is IP55 rated, so it can withstand rain and dust. The subwoofer uses rust resistant hardware and can handle water from off-roading adventures or a quick rinse down.  The PSS-22WRA’s subwoofer and amplifier don’t take up any usable space since they mount under the passenger’s seat for an easy bolt-in installation with simple wire routing. All necessary installation accessories are included.  The included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-22WRA is compatible with any Alpine Restyle Jeep Wrangler dash system, the Jeep factory base radio, or other aftermarket radio. Specifications Direct fit weather resistant (IP55) speaker package for non-amplified 2011– 2018 4-door Jeep® Wrangler JK Unlimited 600W RMS System SPV-65X-WRA 6.5-inch Convertible Component/Coax water resistant speaker kit SBV-10-WRA 10-inch under passenger seat water resistant enclosed subwoofer KTA-30FW – 75W X 4ch Water Resistant Amplifier KTA-30MW – 300W Water Resistant Mono Amplifier Plug & play sound system Compatible with an Alpine Restyle In-Dash system, aftermarket head unit, or with the factory Jeep radio Includes remote bass knob, vehicle specific harnesses and mounting brackets Alpine PSS-22WRA Manual

Read more less

Alpine 300-Watt Powered Speaker-System Upgrade with Built-in Subwoofer for Select 2018-2022 Jeep-Wrangler and Gladiator-JT Vehicles Enjoy premium sound quality even with your JL’s top off! The PSS-23WRA is a 300 watt powered system upgrade featuring a powered subwoofer, amplifier, and tweeters for the 2018-Up Jeep Wrangler-Unlimited-JL and Gladiator-JT vehicles without the factory amplified system. The PSS-23WRA provides excellent sound performance whether the JL’s top is on or off. The PWE-S8 subwoofer is engineered to load and disperse lower frequency sound into the passenger’s foot well area to maximize bass extension throughout the Jeep for great sound with the top on or off. Included with the subwoofer is a remote bass knob so you can control the bass level from the convenience of your dashboard. The Included 4-channel amplifier more than doubles the power over the factory system allowing you to enjoy your tunes with the top off. The PWE-S8 Powered Subwoofer and KTP-445U Power Pack Amplifier don’t take up much since they mount under the passenger’s seat. The two products come pre-connected for easy, bolt-in installation with simple wire routing. Mounting brackets for the products are included as well. The SPR-10TW Component Tweeters replace the factory tweeters on the top of the dash. These high performance tweeters add much needed high frequency response that is lacking in the factory Jeep JL systems. An EQ Ring improves the tweeter’s dispersion characteristics and delivers a wide, flat frequency response. The included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-23WRA is compatible with Alpine universal head units, the factory Jeep base radio, or other aftermarket radios. Specifications Direct fit for non-amplified 2018–Up 4-door Jeep Wrangler JL Unlimited Direct fit for non-amplified 2019–Up 2-door Jeep Wrangler Direct fit for non-amplified 2020–Up Jeep Gladiator JT 300 Watts RMS Plug & Play Sound System Compatible with aftermarket radio, or with factory Jeep Radio Includes remote bass knob, vehicle specific harnesses and mounting bracket Alpine PSS-23WRA Manual

Read more less