On Sale / Clearance

Best Car Stereo Deals happening now on our Clearance Page!

NOW SHIPPING ALL CLEARANCE AND ON-SALE PRODUCTS LISTED ON THIS PAGE

If you would like to have something "On Sale / Clearance" shipped to you please give us a call to place your order. Remote Start orders will, have all vehicle specific firmware uploaded to the bypass module and be provided with installation manuals. We can pre-wire any Remote Start for your installation for a small labor charge of $75. Any required add-on relays for your installation are $10 a piece.

Limited time offer! Automotive Stereos, Speakers, Subwoofers, and Electronics that are On-Sale - while supplies last!

1 product

  • Sale -$100.00 JL Audio JD500/1 : 500W or 250W Mono Amplifier @ 2Ω or 4Ω JL Audio JD500/1 : 500W or 250W Mono Amplifier @ 2Ω or 4Ω, top side.

    JL Audio JD500/1 : Mono 500W/250W Amplifier @ 2Ω/4Ω - Open Box Clearance

    4 Available for pickup

    JD-Series Monoblock Amplifier, 500-Watt @ 2-Ohm or 250-Watt @ 4-Ohm Designed to produce a whopping 500 watts into 2 ohms (14.4V, 1% THD), the JD500/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. JL Audio's proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion. The JD500/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.  The JD500/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat. General Specifications @ 4 Ω 250 W RMS x 1 @ 3 Ω 350 W RMS x 1 @ 2 Ω 500 W RMS x 1 Frequency Response 7 Hz - 500 Hz (+0, -1dB) S/N Ratio, referred to highest rated power >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >60 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >1000 / 50 Hz Damping Factor @ 2 Ω >500 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™) Filter Mode(s) Low-Pass only Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer No Filter Defeat Function No Infrasonic Filter No Bass Boost EQ Yes Output Polarity Switch No Remote Subwoofer Level Control Optional (RBC-1) Remote Bass EQ Boost Control No Pass-Through Preamp Output Buffered JL Audio JD500/1 Manual

    4 Available for pickup

    $299.99$199.99

Login

Forgot your password?

Don't have an account yet?
Create account