Factory OEM Amplifier Bypass Wiring Harness for Select 2015-2019 Fiat and Jeep Vehicles
Allow the factory amplifier to be bypassed without altering the factory wiring.
20 gauge wires
Length – 12 inches
Applications
FIAT
500X
2015-2017
JEEP
Renegade
2015-2019
Axxess AXABH-CH3 Brochure
Amplifier Add-On OEM Line-Converter T-Harness for Select 2013-UP Chrysler and Jeep Vehicles
For use with the Axxess AXDSP-L line converter.
Applications
CHRYSLER
200
2015-2017
300
2015-2023
Pacifica
2017-2020
Pacifica
without separate screen
2021-2022
DODGE
Challenger
2015-2023
Charger
2015-2023
Durango
2014-2020
Durango
without separate screen
2021-2022
Viper
2015-2017
FIAT
500X
2015-2017
JEEP
Cherokee
2014-2020
Compass
2017-2021
Gladiator
2020-2023
Grand Cherokee
2014-2022
Renegade
2015-2020
Wrangler (JL)
2018-2023
RAM
1500/2500/3500
2013-2021
Axxess AXDSPH-CH5 ManualAxxess AXDSPL-CH5 Manual
Add-On Amplifier OEM Integration Line Converter with DSP for Select 2013-UP Chrysler, Dodge, Fiat, Jeep and RAM Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for amplified and non-amplified models
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains OE voice prompts (Uconnect®)
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Applications
CHRYSLER
200
2015-2017
300
2015-2023
Pacifica
2017-2020
Pacifica
without separate screen
2021-2022
DODGE
Challenger
2015-2023
Charger
2015-2023
Durango
2014-2020
Durango
without separate screen
2021-2022
Viper
2015-2017
FIAT
500X
2015-2017
JEEP
Cherokee
2014-2020
Compass
2017-2021
Gladiator
2020-2023
Grand Cherokee
2014-2022
Renegade
2015-2019
Wrangler (JL)
2018-2023
RAM
1500/2500/3500
2013-2018
1500/2500/3500
2019-2021
Axxess AXDSPL-CH5 Manual
Add-On Amplifier OEM Integration Interface for Select 2011-UP Non-Amplified Chrysler, Dodge, Fiat, Jeep and RAM Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-CH5 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
CHRYSLER
200
non-amplified
2015-2017
300
non-amplified
2015-2023
Pacifica
non-amplified
2017-2020
DODGE
Challenger
non-amplified
2015-2023
Charger
non-amplified
2015-2023
Dart
non-amplified
2013-2016
Durango
non-amplified
2014-2020
Durango
non-amplified
2011-2013
FIAT
500
non-amplified
2016-2019
500L
non-amplified
2014-2020
500x
non-amplified
2016-2021
JEEP
Cherokee
non-amplified
2014-Up*
Compass
non-amplified
2022-2023
Compass
non-amplified
2017-2021
Gladiator
non-amplified
2020-2023
Grand Cherokee
non-amplified
2022-2023
Grand Cherokee
non-amplified
2014-2017
Renegade
non-amplified
2015-2023
Wrangler (JL)
non-amplified
2018-2023
Wrangler 4XE
non-amplified
2021-2022
RAM
Chasis Cab 2500-5500
non-amplified
2013-Up*
Promaster
non-amplified
2022-2023
Promaster
non-amplified
2014-2021
Promaster City
non-amplified
2015-2021
RAM Truck
non-amplified
2013-2021
Axxess AXLOC-CH5 Manual
Aftermarket Stereo-Replacement Wiring-Harness for Select Factory Amplified and Non-Amplified 2013-2023 Chrysler, Dodge, Fiat, Jeep, and RAM Vehicles
The AXTC data interface not only provides everything you will need to retain certain features of your vehicle that are normally lost when replacing your factory radio, it also has our patented built-in steering wheel control technology combined with our patented auto-detect feature that automatically detects the vehicle type, radio connection, and preset controls while allowing the ability to dual-assign steering wheel controls. The AXTC provides NAV outputs, accessory power, and a 12-volt illumination output, in addition to retaining R.A.P., balance and fade. This series is designed to work with all major radio brands and offers solutions for amplified and non-amplified audio systems. In addition to auto-detect, this series can be manually programmed for most vehicles and will retain settings even after battery disconnection or interface removal. Details of what features your vehicle-specific package offers can be found listed in this section. Check our Vehicle Fit Guide to see if an AXTC package is available for your vehicle as these products are dependent on vehicle application.
Applications
CHRYSLER
200
w/small screen
2015-2016
DODGE
Dart
w/small screen
2013-2016
Dart
w/o 8.4-inch screen
2013-2016
FIAT
500
2015-2015
500L
2014-2014
500X
2016-2016
JEEP
Cherokee
Sport
2014-2016
RAM
1500/2500/3500 Classic
w/small screen
2019-2023
1500/2500/3500
w/small screen
2013-2018
2500/3500
w/small screen
2019-2023
Axxess AXTC-CH5 Installation Manual
Head-Unit Replacement Antenna-Adapter for Select 2005-UP Acura, Fiat, Honda, Mazda and Toyota Vehicles
If you are replacing the radio in your vehicle, this antenna cable adapter ensures that you can continue to use your factory antenna. It is a simple yet necessary cable that adapts the vehicle’s original antenna cable to plug into an aftermarket radio with a male Motorola-style connector, a blue wire lead on one end and a female Honda-style snap-lock antenna connector on the other.
Antenna adapter cable
Used to adapt the vehicle’s antenna cable to use with an aftermarket radio
Male Motorola™ connector and a blue wire lead on one end
Female Honda-style snap-lock antenna connector on the other end
A blue wire is attached to the adapter that connects to the antenna turn-on lead of the aftermarket radio
Applications
ACURA
MDX
2005-2013
RDX
2007-2012
TL
2007-2008
TSX
2009-2014
FIAT
Fiat 124 Spider
2017-2020
HONDA
Accord
2008-2012
Accord Crosstour
2010-2011
Civic
2006-2011
CR-V
2007-2011
Crosstour
2012-2015
Element
2005-2011
Fit
2007-2013
Insight
2010-2014
Odyssey
2005-2010
Pilot
2006-2011
Ridgeline
2005-2014
MAZDA
2
2011-2014
3
2010-2018
5
2012-2015
6
2009-2021
CX-3
2016-2021
CX-5
2013-2020
CX-7
2010-2012
CX-9
2010-2020
MX-5 Miata, MX-5 Miata RF
2016-2020
SUZUKI
Kizashi
2010-2013
TOYOTA
Yaris, Yaris Sedan
2019-2020
Yaris iA
2017-2018
Head-Unit Replacement Female Antenna-Adapter for Select 2005-UP Acura, Fiat, Honda, Mazda and Toyota Vehicles
If you are replacing the factory antenna in your vehicle, this antenna cable adapter ensures that you can continue to use your original factory radio. It is a simple yet necessary cable that adapts the aftermarket antenna cable to plug into the vehicle’s factory radio with a female Motorola™ connector, a blue wire lead on one end and a male Honda-style connector on the other.
Antenna adapter cable
Used to adapt the vehicle’s original factory radio to use with an aftermarket antenna
Female Motorola™ connector and a blue wire lead on one end
Male Honda-style antenna connector on the other end
A blue wire is attached to the adapter that connects to the antenna turn-on lead of the factory radio
Enter your vehicle model to see if this is compatible with your vehicle
Applications
ACURA
MDX
2005-2013
RDX
2007-2012
TL
2007-2008
TSX
2009-2014
FIAT
Fiat 124 Spider
2017-2020
HONDA
Accord
2008-2012
Accord Crosstour
2010-2011
Civic
2006-2011
CR-V
2007-2011
Crosstour
2012-2015
Element
2005-2011
Fit
2007-2013
Insight
2010-2014
Odyssey
2005-2010
Pilot
2006-2011
Ridgeline
2005-2014
MAZDA
2
2011-2014
3
2010-2018
5
2012-2015
6
2009-2021
CX-3
2016-2021
CX-5
2013-2020
CX-7
2010-2012
CX-9
2010-2020
MX-5 Miata, MX-5 Miata RF
2016-2020
SUZUKI
Kizashi
2010-2013
TOYOTA
Yaris, Yaris Sedan
2019-2020
Yaris iA
2017-2018
Head-Unit Add-On Male and Female Antenna-Adapter Cable Set for Select 2005-UP Acura, Fiat, Honda, Mazda and Toyota Vehicles
If you are adding an external device with a built-in FM modulator in your vehicle, these antenna cable adapters ensure that you can continue to use your factory radio and antenna. These are simple yet necessary cables that adapt the vehicle’s original factory radio and antenna connectors to plug into the FM modulator.
Antenna adapter kit
Used to adapt the vehicle’s original factory radio and antenna connectors to use with an FM modulator
Cable #1 has a male Motorola™ connector on one end and a female Honda-style snap-lock antenna connector on the other
Cable #2 has a female Motorola™ connector on one end and a male Honda-style antenna connector on the other
A blue wire is attached to the adapter that connects to the antenna turn-on lead of the radio
Enter your vehicle model to see if this is compatible with your vehicle
Applications
ACURA
MDX
2005-2013
RDX
2007-2012
TL
2007-2008
TSX
2009-2014
FIAT
Fiat 124 Spider
2017-2020
HONDA
Accord
2008-2012
Accord Crosstour
2010-2011
Civic
2006-2011
CR-V
2007-2011
Crosstour
2012-2015
Element
2005-2011
Fit
2007-2013
Insight
2010-2014
Odyssey
2005-2010
Pilot
2006-2011
Ridgeline
2005-2014
MAZDA
2
2011-2014
3
2010-2018
5
2012-2015
6
2009-2021
CX-3
2016-2021
CX-5
2013-2020
CX-7
2010-2012
CX-9
2010-2020
MX-5 Miata, MX-5 Miata RF
2016-2020
SUZUKI
Kizashi
2010-2013
TOYOTA
Yaris, Yaris Sedan
2019-2020
Yaris iA
2017-2018
Web-Programmable Remote Start Solution for Select Chrysler, Dodge, Fiat, Jeep, RAM Vehicles
Qty 1 - Omegalink OL-RS-CH10 - RF Style Add-on Remote Start System
The OL-RS-CH10 is a web-programmable, standalone remote start solution for Chrysler non-‘Tipstart’ models 2011 and up. Supports remote start from factory transmitter by pressing 3 X LOCK. Includes custom t-harness for ‘plug & play’ installation. Can be paired with compatible range extender kit sold separately.
NOTE: This system does not have firmware loaded when new. It must be flashed by an authorized Omega Dealer before installation is possible.
Note: Features may vary depending on vehicle year, make, and model. Please consult your installer for more information.
Click Here to View Vehicle Coverage Information
Features:
Downloadable Software
Feature Selection
Advanced Feature Programming V2
Door Lock
Priority Unlock
Door Unlock
Trunk/Hatch Release
Arm OEM Alarm
Disarm OEM Alarm
Aftermarket Alarm Ctrl from OEM remotes
Horn Ctrl (wire)
Door Stat Output
Trunk Stat Output
Data Immobilizer Bypass
Parking Light Ctrl
Tachometer Output
Brake Pedal Stat Output
E-Brake Output
RAP Shutdown Ctrl
Data/MUX Keysense Ctrl
Data/MUX Accessory Ctrl
Data/MUX Ignition Ctrl
Data/MUX Starter Ctrl
3XLOCK start w/ standalone module
Qty 1 - Your choice of Extended Range Remote Control
None - 1-Way Operation with factory key fab by pressing the Lock Button 3 times. - Limited to Factory Fab Operating Range
OL-RF-15-SST - 2-Way 1-Button Add-on RF Style Remote Start Remote Control - 3000' Range
OL-RF-42-SST - 2-Way 5-Button Add-on RF Style Remote Start Remote Control - 3000' Range
CarLink - Add-on RF Style Cellular Remote Start Remote Control - 1.5 Mile Range
LINKR-LT2 - Add-on Cellular Remote Start Controller, data plan required - Cell Tower Range
Lifetime Warranty with our add-on Professional Remote Start installation.
Lifetime warranty on our un-altered installation
Lifetime warranty on the remote start and bypass system
Add-On Amplifier OEM Integration Interface for Select 2007-2024 Amplified Chrysler, Dodge, Fiat, Jeep, RAM and Volkswagen Vehicles
Simplify speaker wire connections when adding aftermarket amplifiers with Pac-Audio's speaker connection harnesses. This adapter can easily add amplifiers with no need to cut or modify a vehicle’s original wiring.
Features:
Works with PAC AmpPRO: AP4-CH21, AP4-CH31, and AP4-CH41
Can use it for other installations requiring plug-n-play speaker wire connections
Easily add amplifiers without cutting or modifying the vehicle’s original wiring.
Provides a plug-n-play connection at the vehicle’s original amplifier location
Saves time by quickly utilizing the original speaker wires
Harness length 18 inches
Applications
CHRYSLER
200
With factory amplifier
2015-2017
300
With factory amplifier
2012-2023
Town & Country
With factory amplifier
2008-2016
DODGE
Challenger
With factory amplifier
2015-2023
Charger
With factory amplifier
2012-2023
Dart
With factory amplifier
2013-2016
Durango
With factory amplifier
2011-2023
Grand Caravan
With factory amplifier
2008-2020
Journey
With factory amplifier
2009-2020
Nitro
With factory amplifier
2007-2011
RAM 1500, 2500, 3500
With factory amplifier
2010-2018
RAM 1500, 2500, 3500
Classic model, With factory amplifier
2019-2024
FIAT
500
With factory amplifier
2014-2019
JEEP
Cherokee
With factory amplifier
2015-2023
Grand Cherokee
With factory amplifier
2014-2017
Liberty
With factory amplifier
2008-2012
Wrangler
JK, With factory amplifier
2018
Wrangler
With factory amplifier
2008-2017
Wrangler Unlimited
JK, With factory amplifier
2018
Wrangler Unlimited
With factory amplifier
2008-2017
RAM
1500, 2500, 3500
With factory amplifier
2010-2018
1500, 2500, 3500
Classic model, With factory amplifier
2019-2024
VOLKSWAGEN
Routan
With factory amplifier
2010-2014
Pac Audio APH-CH01 Manual
