All

W3-Series 10-Inch 500-Watt Subwoofer Driver, 2-Ohm or 4-Ohm SVC The JL Audio 10W3v3 subwoofer driver has excellent power handling, reasonable enclosure requirements, and a long excursion for its chassis to deliver excellent bass reproduction in 500W RMS power applications. JL Audio technologies and proprietary assembly designs in the 10W3v3-2 and 10W3v3-4 subwoofers enhance linearity and reliable performance results. The JL Audio 10W3v3 is best used with an amplifier in the 150W - 500W RMS range and is optimized to operate in a compact 0.625 cu. ft. (17.7  l) sealed enclosure, or a 1.25 cu. ft. (35.4 l) ported enclosure. General Specifications Continuous Power Handling 500W RMS Recommended Amplifier Power 150- 500W RMS Nominal Impedance 2Ω JL Audio 10W3v3 Manual

Read more less

W3-Series 12-Inch 500-Watt Subwoofer Driver, 2-Ohm or 4-Ohm Single Voice Coil This 12-inch W3v3 subwoofer driver by JL Audio delivers world-class sound quality in a 500W RMS power package.  The JL Audio 12W3v3-2 and 12W3v3-4 automotive subs are best used with an amplifier in the 150-Watt - 500-Watt RMS range and are optimized to operate in a compact 1.25 cu. ft. (35.4 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure. General Specifications Continuous Power Handling (RMS) 500 W Recommended Amplifier Power (RMS) 150 - 500 W Nominal Impedance (Znom) 2 Ω JL Audio 12W3v3 Manual

Read more less

W7-Series 8-Inch 500-Watt Subwoofer Driver, 3-Ohm SVC This subwoofer driver has been called the "best damn 8-inch subwoofer ever made" for its remarkable performance capabilities and design attributes. An impressive linear excursion envelope that exceeds 0.75 in. (19 mm) one-way allows it to deliver impact well beyond the range of other 8-inch subwoofer drivers. The 8W7AE is best used with amplifier power in the 200W - 500W range and is optimized to operate in a 0.875 cu. ft. (24.8 l) sealed enclosure, or a 1.0 cu. ft. ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab. W7AE (Anniversary Edition) Subwoofers celebrate the 10th Anniversary of the launch of the W7 subwoofers. Functionally, they are identical to the original W7's, but are they distinguished by the following cosmetic differences: Satin-Black Powdercoated Baskets Bright Anodized Surround Clamp Ring Anniversary Edition Cone Badge Anniversary Edition Terminal Label General Specifications Continuous Power Handling (RMS) 500 W Recommended Amplifier Power (RMS) 200 - 500 W Nominal Impedance (Znom) 3 Ω JL Audio 8W7AE Manual

Read more less

W3-Series 500-Watt Amplified Dual 8-Inch Ported Subwoofer System With MicroSub+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes JL's exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance W3v3 drivers. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency. Key to the enclosure’s performance is its efficient slot-ported design and precise tuning of its dual 8Wv3 subwoofer drivers, each in its separate airspace. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port for each driver wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The two flared port entries/exits, one on each end of the enclosure, further enhance sound quality by minimizing air-flow noises through each port. Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems. Note: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. Steel mesh grilles are included to protect the subwoofer drivers. Construction: CNC-Cut High-Grade MDF Amplifier power: Built-in DCD™ Class D amplifier (500 W @ 0.20 Ω)Nominal Impedance: 0.20 Ω Enclosure and Subwoofers Built in USA with global components. General Specifications Continuous Power Handling (RMS) Built-in amplifier 500 W @ 0.20 Ω System Nominal Impedance 0.20 Ω Input Voltage Range @ RCA Inputs 70 mV - 1.40 V RMS Input Voltage Range @ High-Level Inputs 280 mV - 5.4 V RMS Recommended Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 30 A (ATO or ATC) Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh Signal Processing  Filter Mode(s) Low-Pass only Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 200 Hz Output Polarity Switch Yes Remote Subwoofer Level Control Optional (RBC-1) Physical Specifications External Width (W) 36.625 in / 905 mm External Height (H) 11.125 in / 283 mm External Depth (D1) 5.125 in / 130 mm Net Weight 34.9 lb / 15.83 kg JL Audio MicroSub+/PowerWedge+ Manual

Read more less

MicroSub-Series 8" Enclosed Dual 8-Inch 500-Watt Subwoofer System, 2Ω Ported Enclosure This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its dual 8W3v3 subwoofer drivers, each in separate airspace, with an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port for each driver wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The two flared port entries/exits, one on each end of the enclosure, further enhance sound quality by minimizing air-flow noises through these ports. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. Steel mesh grilles are included to protect the subwoofer drivers. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 200 - 500WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 500 W System Nominal Impedance 2 Ω Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh Physical Specifications Net Weight 32.2 lb / 14.61 kg External Width (W) 35.5 in / 902 mm External Height (H) 11.0 in / 279 mm External Depth (D1) 5.125 in / 130 mm JL Audio CP208LG-W3v3 Brochure

Read more less

High Output Series 10-Inch 500-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure JL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. JL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates on one side of the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W3v3 driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 10W3v3, and has been fine-tuned through extensive real-world listening. This efficient system will produce superb output with as little as 150W of amplifier power, but performs best with 300 - 500W of power. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Three solid aluminum bars provide stylish and rugged woofer protection. The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat. Finish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. "JL AUDIO" is embroidered in silver on the top surface of the enclosure. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 150 - 500WNominal Impedance: 2Ω General Specifications Continuous Power Handling (RMS) 500 W System Nominal Impedance 2 Ω Enclosure Type Chamber-coupled, slot-ported, rear-firing design Finish Dark gray carpet with black insert Grille Included Aluminum Bar Grille Physical Specifications External Width (W) 29.5 in / 749 mm External Height (H) 13.5 in / 343 mm External Depth (D1) 12.0 in / 305 mm External Top Surface Depth (D2) 7.5 in / 190.5 mm Net Weight 34.7 lb / 15.74 kg JL Audio HO110RG-W3v3 Brochure

Read more less

High Output Series 12-Inch 500-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure JL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. JL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates on one side of the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W3v3 driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 12W3v3, and has been fine-tuned through extensive real-world listening. This efficient system will produce superb output with as little as 150W of amplifier power, but performs best with 300 - 500W of power. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Three solid aluminum bars provide stylish and rugged woofer protection. The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat. Finish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. "JL AUDIO" is embroidered in silver on the top surface of the enclosure. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 150 - 500WNominal Impedance: 2Ω General Specifications Continuous Power Handling (RMS) 500 W System Nominal Impedance 2 Ω Enclosure Type Chamber-coupled, slot-ported, rear-firing design Finish Dark gray carpet with black insert Grille Included Aluminum Bar Grille Physical Specifications External Width (W) 32.25 in / 819 mm External Height (H) 15.25 in / 387 mm External Depth (D1) 13.5 in / 343 mm External Top Surface Depth (D2) 7.5 in / 190.5 mm Net Weight 46.9 lb / 21.27 kg JL Audio HO112RG-W3v3 Brochure

Read more less

Single 12-Inch 2-Ohm 500-Watt Subwoofer-Enclosure for Select 2009-UP Dodge-Challenger This reborn American legend just might be the most faithful interpretation of the classic “muscle car” formula to date. It has it all... raw power, aggressive looks, a comfortable interior... but, it certainly could use a serious audio system upgrade to erase the wimpy performance of the factory system. JL's Stealthbox® for the Challenger is the perfect product to begin your audio transformation. It installs neatly into the driver-side corner of the trunk with minimal impact on usable cargo area. Spectacular sound quality and impressive output are delivered by a high-performance JL Audio 12-inch subwoofer in a sealed enclosure precisely matched to the Challenger's acoustics by our engineering team. Great audio in your Challenger begins here. The Hard Data: Contains one 12W3v3-2 subwoofer in a sealed enclosure. 500 watt power handling. Wired for 2 ohm mono. Installs against driver-side wheel well. Stealthbox® includes a steel-mesh grille to protect the driver. Access to the spare tire, jack and tools remains unaffected. Installation requires removal of factory-installed ‘subwoofer' if vehicle is equipped with ‘Kicker® SRT® Audio Package'. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-D-CHLGR/12W3v3 Installation Manual

Read more less

Single 10-Inch 500-Watt 2-Ohm Carpeted Fiberglass Subwoofer-Enclosure for Select 2002-2018 Dodge Ram 1500 Quad Cab, 2003-Up 2500 & 3500 Quad Cab & 2009-2018 1500 Crew Cab & 2009-Up 2500 & 3500 Crew Cab Trucks Dodge's big hauler combines large sedan passenger comfort with tough pickup truck capabilities. JL's Stealthbox® for the Quad Cab tucks under the rear seat on the passenger side and encloses a 10-inch driver for impressive sub-bass performance. Seat folding is unaffected and plenty of room is left on the driver side for amplifier installation or storage. Best of all, the Stealthbox® is essentially invisible once installed. The Hard Data: Contains one 10W3v3-2 in a sealed enclosure. 500 watt power handling. Wired for 2 ohm mono. Installs under passenger side rear-bench seat. The seat folding function remains unaffected. Cup holders are not affected. Some models require removal of the passenger side metal floor extension located under the rear seat. Some models may require cutting and removal of the underseat carpet and/or carpet padding. Will not fit Mega Cab. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-D-QDRAM/10W3v3 Installation Manual

Read more less

Single 500-Watt 2-Ohm 10-Inch Subwoofer-Enclosure for Select 1998-2007 Ford-Excursion and F-Series SuperDuty Trucks with Front Bucket-Seats If you drive Ford's biggest SUV or if your SuperDuty truck is equipped with bucket seats and a center console, this Stealthbox® model is right up your alley. Without infringing on people space and without being visible, it will fill your interior with rich, deep bass. This compact unit installs inside the factory center console. The cup holders remain unaffected and some console storage is retained. A powerful JL Audio 10-inch subwoofer driver fires down into the floor for intense up-front bass presence. The Hard Data: Contains one 10W3v3-2 in a sealed enclosure. 500 watt power handling. Wired for 2 ohm mono. Stealthbox® installs inside factory center console and fires down on the floor. Cupholders are not affected. For installation into front console only. Console storage is reduced. The factory console is not supplied with the Stealthbox®. After installation, the factory console is raised approximately 1.5 inches above the floor. Will not fit in SuperDuty trucks with bench seats. Will not fit consoles with rear cup holders and rear audio controls. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-F-SUPRCNSL/10W3v3 Installation Manual

Read more less

10-Inch 2-Ohm 500-Watt Subwoofer Enclosure for Select 2011-2021 Jeep Grand-Cherokee with Black or Light-Frost Interior The Grand Cherokee's pedigree for off-road prowess, comfort and everyday utility is well-represented by this generation of the venerable nameplate. We know that Jeep owners value the “go-anywhere, do-anything” capabilities of their vehicles. A bulky subwoofer enclosure that takes up valuable cargo space is not part of that experience, so JL Audio was pleased to present this beautiful Stealthbox® solution for the Jeep Grand Cherokee owner seeking great audio performance. The Stealthbox® replaces the OEM “subwoofer” with a sealed enclosure housing a potent 10-inch JL Audio subwoofer driver. The enclosure installs in the passenger side rear corner of the cargo area without interfering with under-floor storage or cargo tie-down fixtures, while the included steel mesh grille keeps the driver safe from cargo-related mishaps. The Hard Data: Contains one 10W3v3-2 subwoofer in a sealed enclosure. 500 watt power handling. Wired for 2 ohm mono. Black steel mesh woofer grille is included. Installs into passenger-side rear cargo panel and requires removal of factory “subwoofer”, if so equipped. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-J-GCHWK2/10W3v3 Installation Manual

Read more less

15-Inch 500-Watt Subwoofer Driver, 2-Ohm or 4-Ohm DVC This 43CVR 15" subwoofer by Kicker uses an advanced heat dispersion system with perimeter venting to allow air to circulate while the Kicker proprietary UniPlate™ system redirects even more heat away from the motor.  The chassis of this 15-Inch sub holds a pair of high-temp voice coils that move an injection molded woofer. The CompVR 15" subwoofer is available in a 2Ω or 4Ω dual voice coil design. The Kicker 43CVR152 and 43CVR154 15" subs works best with a sealed or ported enclosure and 500 watts of recommended power. See below for more details. Specifications SIZE [in, cm]: 15, 38 IMPEDANCE [Ohms]: 2 or 4 DVC Recommended Amplifier Power (watts RMS) 500 Peak Power (watts, per ANSI/CTA-2031-A) 1000 SENSITIVITY [dB 1w/1m]: 89.2 MOUNTING DEPTH [in, cm]: 8 3/16, 20.7 MOUNTING DIAMETER [in, cm]: 13 11/16, 34.7 MIN SEALED BOX VOL [cu. ft, L]: 1.8, 51 MAX SEALED BOX VOL [cu. ft, L]: 5.2, 147 MIN VENTED BOX VOL [cu. ft, L]: 3, 85 MAX VENTED BOX VOL [cu. ft, L]: 5, 142 Kicker CompVR Subwoofer Manual

Read more less

12-Inch 500-Watt Subwoofer Driver, 4-Ohm DVC The 43CWR12 12" subwoofer by Kicker has an advanced suspension system that includes a ribbed polypropylene surround and a large-diameter spider for linear movement, and a distortion-free sound. Bigger magnets, a thicker cone and an improved suspension system help make this 12-Inch 500W CompR sub to be a workhorse of a driver.The Kicker 43CWR124 12" sub work best with a sealed or ported enclosure and 500 watts of recommended power. Specifications SIZE [in, cm]: 12, 30 IMPEDANCE [Ohms]: 4 DVC Recommended Amplifier Power (watts RMS) 500 Peak Power (watts, per ANSI/CTA-2031-A) 1000 SENSITIVITY [dB 1w/1m]: 86.9 MOUNTING DEPTH [in, cm]: 5 3/4, 14.6 MOUNTING DIAMETER [in, cm]: 11, 27.9 MIN SEALED BOX VOL [cu. ft, L]: 1.0, 28.3 MAX SEALED BOX VOL [cu. ft, L]: 2.0, 56.64 MIN VENTED BOX VOL [cu. ft, L]: 1.75, 49.6 MAX VENTED BOX VOL [cu. ft, L]: 2.25, 63.7 Kicker CompR Subwoofer Manual

Read more less

10-Inch 500-Watt Square Subwoofer Driver, 2-Ohm or 4-Ohm DVC This L7 series 10" square woofer by Kicker hosts a heavy-duty motor structure that includes a large-diameter spider for less flex, longer life and superior accuracy. On board the chassis of this 500W driver you will find dual high-temp voice coils, an injection-molded polypropylene cone, SoloKon™ 360-degree back bracing, ribbed santoprene surround with blue stitching and a UniPlate™ back plate and pole piece, plus perimeter venting for thermal heat management. The Kicker 45L7R102 and 45L7R104 square subwoofers are rated for 500W of RMS amplified power. Specifications SIZE [in, cm]: 10, 25 IMPEDANCE [Ohms]: 2 or 4 DVC Recommended Amplifier Power (watts RMS) 500 Peak Power (watts, per ANSI/CTA-2031-A) 1000 SENSITIVITY [dB 1w/1m]: 85.9 MOUNTING DEPTH [in, cm]: 6 1/8, 15.7 MOUNTING DIAMETER [in, cm]: 9 5/16, 23.7 MIN SEALED BOX VOL [cu. ft, L]: .66, 18.7 MAX SEALED BOX VOL [cu. ft, L]: 1, 28.3 MIN VENTED BOX VOL [cu. ft, L]: 1.25, 35.4 MAX VENTED BOX VOL [cu. ft, L]: 2.25, 63.7 Kicker L7R Subwoofer Manual

Read more less

10-Inch 500-Watt Loaded Thin Square Subwoofer Enclosure, 2-Ohm Final Impedance With this TL7R series thin 10" square sub box you get up to 20% more air movement compared to a round driver. This 500W loaded enclosure has an angled back, heavy duty internal bracing, thick MDF construction and black carpeting with a Kicker embroidered logo. This TL7R subwoofer enclosure contains a single 10 Inch square driver with an RMS power rating of 500W @ 2Ω. Specifications Type single truck Woofer [in, cm] Solo-Baric L7R 10" Impedance [Ohms] 2 Recommended Amplifier Power [watts RMS] 500 SENSITIVITY [dB 1w/1m] 88 Box Top Depth (in, cm): 6 1/2, 16.4 Box Bottom Depth (in, cm): 10, 25.4 Box Height (in, cm): 15, 38.1 Box Width (in, cm): 21 1/2, 54.6 What's in the box? one loaded enclosure with one 10-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers

Read more less

10-Inch 500-Watt Loaded Square Subwoofer Enclosure, 2-Ohm Final Impedance With this L7R series 10" square sub box you get up to 20% more air movement compared to a round driver. This 500W loaded enclosure has an angled back, heavy duty internal bracing, thick MDF construction and black carpeting with a Kicker embroidered logo. This L7R subwoofer enclosure contains a single 10 Inch square driver with an RMS power rating of 500W @ 2Ω. Specifications Type single Woofer [in, cm] Solo-Baric L7R 10" Impedance [Ohms] 2 Recommended Amplifier Power [watts RMS] 500 SENSITIVITY [dB 1w/1m] 88.8 Box Top Depth (in, cm): 8 1/4, 21 Box Bottom Depth (in, cm): 13 7/8, 35.1 Box Height (in, cm): 13, 33 Box Width (in, cm): 24, 61 What's in the box? one loaded enclosure with one 10-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers

Read more less

10-Inch Thin Subwoofer Driver, 500-Watt RMS, 2-Ohm or 4-Ohm Dual-Voice-Coil The Kicker Solo-Baric® L7T square subwoofer delivers more bass than a round driver, giving you up to 20% more cone area than a round sub while fitting where only a thin driver will do. Match any L7T thin sub with a KX-Series mono amplifier for an outstanding combination of power and size. Uses a sealed or ported enclosure Square sub design moves 20% more air than round subwoofers Easily mounts under or behind a deat Dual voice coil design Ribbed santoprene surround resists heat And degrading Bumped top plate for more excursion & smoother performance SoloKon™ cone with 360-degree back bracing UniPlate™ solid pole pPiece & backplate for excellent heat dissipation Durable steel basket Specifications Size (IN.,CM) 10, 25 Impedance (OHMS) 2 or 4 DVC Recommended Amplifier Power (watts RMS) 500 Peak Power (watts, per ANSI/CTA-2031-A) 1000 Sensitivity (dB 1w/1m) 85.98 Frequency Response (Hz) 25-100 Mounting Depth (IN.,CM) 3-3/4, 9.5 Mounting Cutout, Square (IN.,CM) 9-5/16, 23.7 Min Rec Sealed Box Volume (CU. FT., Liters) .4, 11.3 Max Rec Sealed Box Volume (CU. FT., Liters) 1.25, 28.3 Min Rec Vented Box Volume (CU. Ft., Liters)** 1.25, 35.4 Max Rec Vented Box Volume (CU. Ft., Liters)** 1.75, 49.6 Kicker L7T Subwoofer Manual

Read more less

10-Inch Thin Loaded Subwoofer Enclosure, 500-Watts RMS, 2-Ohm or 4-Ohm Impedance Barely seven inches deep, the Kicker TL7T 10-Inch thin subwoofer enclosure is perfect for big bass under or behind your seats. Genuine Kicker L7T subwoofer included Angled design for excellent fit Heavy internal bracing Single 2-Ohm terminal Easy to install and wire Thick black carpeting Rounded corners Embroidered Kicker logo Thick MDF construction Specifications Type single truck Woofer [in, cm] Solo-Baric L7T 10" 2Ω or 4 Ω Impedance [Ohms] 2 or 4 Recommended Amplifier Power [watts RMS] 500 SENSITIVITY [dB 1w/1m] 85.98 Box Top Depth (in, cm): 4-3/8, 11.3 Box Bottom Depth (in, cm): 7-1/4, 18.5 Box Height (in, cm): 12, 30.4 Box Width (in, cm): 20-1/4, 51.5 What's in the box? one loaded enclosure with one 10-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers Kicker L7T Subwoofer Enclosure Manual

Read more less

12-Inch 500-Watt Subwoofer Driver, 2-Ohm or 4-Ohm DVC The 48CWR12 12" subwoofer is available in a 2Ω or 4Ω dual voice coil design, making it easy to get the most out of your amp. An advanced suspension and heat management system helps to keep the bass powerful, deep and consistent – all without a hint of distortion. KICKER developed Forced Air Cooling to helps their subs run 25% cooler.The Kicker 48CWR122 and 48CWR124 12" subs work best with a sealed or ported enclosure and 500 watts of recommended power. Specifications SIZE [in, cm]: 12, 30 IMPEDANCE [Ohms]: 2 or 4 DVC Recommended Amplifier Power (watts RMS) 500 Peak Power (watts, per ANSI/CTA-2031-A) 1000 SENSITIVITY [dB 1w/1m]: 86.9 MOUNTING DEPTH [in, cm]: 5 3/4, 14.6 MOUNTING DIAMETER [in, cm]: 11, 27.9 MIN SEALED BOX VOL [cu. ft, L]: 1.0, 28.3 MAX SEALED BOX VOL [cu. ft, L]: 2.0, 56.64 MIN VENTED BOX VOL [cu. ft, L]: 1.75, 49.6 MAX VENTED BOX VOL [cu. ft, L]: 2.25, 63.7 Kicker CompR Subwoofer Manual

Read more less

12-Inch 500-Watt Thin Subwoofer Driver, 2-Ohm or 4-Ohm DVC The CompRT 12-inch subwoofer is an all-weather thin bassb driver with a pair of 2-Ohm or 4-Ohm voice coils. With a mounting depth under four inches and plenty of power handling, this go-anywhere sub is as flexible as it is powerful. A UV-resistant cone and surround help make the CompRT sound great wherever the road (or trail) takes you. An advanced suspension and heat management system helps to keep the bass powerful, deep and consistent. To make Kicker subs even more reliable, their engineers developed Forced-Air Cooling™ to help these thin subs run 20 percent cooler than before. Kicker signature red double stitching makes an outstanding bond between the improved Santoprene surround and polypropylene woofer cone. Revolutionary SoloKon™ technology joins the cone to the vented back brace, creating a single integrated unit that both cools the motor and eliminates distortion.The CompRT 12-Inch 48CWRT122 and 48CWRT124 subwoofers work best with a sealed or ported enclosure and 500 watts of recommended power. Specifications SIZE [in, cm]: 12, 30 IMPEDANCE [Ohms]: 2 or 4 DVC Recommended Amplifier Power (watts RMS) 500 Peak Power (watts, per ANSI/CTA-2031-A) 1000 SENSITIVITY [dB 1w/1m]: 85.5 MOUNTING DEPTH [in, cm]: 3 3/4,9.6 MOUNTING DIAMETER [in, cm]: 11, 27.9 MIN SEALED BOX VOL [cu. ft, L]: 0.55, 15.57 MAX SEALED BOX VOL [cu. ft, L]: 2.0, 56.64 MIN VENTED BOX VOL [cu. ft, L]: 1.75, 49.6 MAX VENTED BOX VOL [cu. ft, L]: 2.25, 63.7 Kicker CompRT Subwoofer Manual

Read more less

12-Inch 500-Watt Loaded Thin Dual Subwoofer Enclosure, 2-Ohm Configuration The CompRT 12" thin subwoofer by Kicker is a weather resistant thin sub with a 2Ω configuration. This thin 12 inch sub magnet structure delivers 500W RMS of power. The Kicker designed UniPlate™ back plate and solid pole piece serve as a single heat-absorbing unit to keep this 12" CompRT thin subwoofer driver nice and cool.The Kicker 43TCWRT122 12" subwoofer enclosure works best with 500 watts of RMS power. Specifications TYPE: single NO. OF WOOFERS/SIZE (in, cm): (1) 12, 30 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 500 Peak Power (watts, per ANSI/CTA-2031-A) 1000 SENSITIVITY (dB 1w/1m): 98 BOX TOP DEPTH (in, cm): 3-1/2, 8.9 BOX BOTTOM DEPTH (in, cm): 7, 17.7 BOX HEIGHT (in, cm): 13-1/2, 34.3 BOX WIDTH (in, cm): 27, 68.5vv Kicker CompRT Subwoofer Enclosure Manual

Read more less

Dual 12-Inch Thin Subwoofer Enclosure, 500-Watt RMS, 2-Ohm The Kicker CompRT series down-firing 12-inch subwoofer enclosure comes loaded with a passive reFLEX™ subwoofer and Kicker CompRT sub, then carpeted and loaded with a single 2Ω terminal.  Covered in stylish black carpeting and built with thick MDF, these tough enclosures take serious power without taking up needed space. The TRTP 12-inch subwoofer enclosure works best with 500-watts of recommended power. Specifications TYPE: thin-profile WOOFER SIZE (in, cm): 12, 30 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 500 Peak Power (watts, per ANSI/CTA-2031-A) 1000 SENSITIVITY (dB 1w/1m): 98 BOX TOP DEPTH (in, cm): 14-5/8, 37 BOX BOTTOM DEPTH (in, cm): 14-5/8, 37 BOX HEIGHT (in, cm): 6-1/8, 15.6 BOX WIDTH (in, cm): 27-1/2, 70 Kicker TRTP Subwoofer Enclosure Manual

Read more less

12-Inch 500-Watt Loaded Dual Subwoofer Enclosure, 2-Ohm Final Impedance The CompR 12-Inch Subwoofer Enclosure comes loaded, carpeted and ready to ride.Covered in stylish black carpeting and built with thick MDF, this loaded sub box is one of the sturdiest enclosures money can buy. The enclosure comes in a 2-Ohm impedance to make your sub amp deliver some serious juice!The CompR 12-Inch Subwoofer Enclosure works best with 500 watts of recommended power. See below for more details. Specifications TYPE: single NO. OF WOOFERS/SIZE (in, cm): (1) 12, 30 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 500 Peak Power (watts, per ANSI/CTA-2031-A) 1000 SENSITIVITY (dB 1w/1m): 90.8 BOX TOP DEPTH (in, cm): 11-3/8, 28.9 BOX BOTTOM DEPTH (in, cm): 14-1/2, 36.8 BOX HEIGHT (in, cm): 16, 40.6 BOX WIDTH (in, cm): 23, 58.4 Kicker CompR Subwoofer Enclosure Manual

Read more less