Add-On Amplifier OEM Integration Interface for Select 2016-UP Honda Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-HN3 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
HONDA
Civic
non-amplified
2016-2018
Civic Hatchback
non-amplified
2017-2018
CRV
non-amplified
2017-Up*
Fit
non-amplified
2018-Up*
HRV
non-amplified
2019-Up*
Insight
non-amplified
2019-Up*
Axxess AXLOC-HN3 Manual
Add-On Amplifier OEM Integration Interface for Select 2008-UP Acura and Honda Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-HN2 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
HONDA
Accord
non-amplified
2008-2012
Civic
non-amplified
2009-2015
CRV
non-amplified
2012-2016
Fit
non-amplified
2009-2017
HRV
non-amplified
2016-2018
Insight
non-amplified
2010-2014
Odyssey
non-amplified
2011-2017
Pilot
non-amplified
2009-2017
Ridgeline
non-amplified
2009-Up*
Axxess AXLOC-HN2 Manual
Add-On Amplifier OEM Integration Interface for Select 2003-2019 Ford, Lincoln, Mazda and Mercury Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-FD1 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
FORD
Crown Victoria
non-amplified
2003-2011
E-Series
non-amplified
2009-2019
Edge
non-amplified
2007-2010
Explorer
non-amplified
2006-2010
F-Series
non-amplified
2004-2016
F650/F750
non-amplified
2011-2019
Five Hundred
non-amplified
2005-2007
Flex
non-amplified
2009-2012
Focus
non-amplified
2005-2011
Freestar
non-amplified
2004-2007
Freestyle
non-amplified
2005-2007
Fusion
non-amplified
2006-2012
Mustang
non-amplified
2004-2014
Taurus
non-amplified
2008-2012
Thunderbird
non-amplified
2004-2005
Transit Connect
non-amplified
2010-2013
LINCOLN
LS
non-amplified
2003-2006
MKX
non-amplified
2007-2010
MKZ
non-amplified
2007-2009
Navigator
non-amplified
2003-2006
Towncar
non-amplified
2003-2011
Zephyr
non-amplified
2006-2006
MAZDA
Tribute
non-amplified
2008-2011
MERCURY
Grand Marquis
non-amplified
2003-2011
Mariner
non-amplified
2005-2011
Milan
non-amplified
2006-2011
Montego
non-amplified
2005-2007
Monterey
non-amplified
2004-2011
Mountainer
non-amplified
2006-2010
Sable
non-amplified
2008-2009
Axxess AXLOC-FD1 Manual
Add-On Amplifier OEM Integration Interface for Select 2011-2014 Chrysler Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-CH3 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
CHRYSLER
300/300C
non-amplified
2011-2014
Axxess AXLOC-CH3 Manual
Add-On Amplifier OEM Integration Interface for Select 1995-2013 Non-Amplified Infinity and Nissan Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-NIS Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
INFINITI
FX35
2003-2008
FX45
2003-2008
G20
1995-1996
NISSAN
200SX
1995-1998
240SX
1995-1998
350Z
2003-2009
Altima
1995-2006
Armada
2004-2007
Frontier
1998-2012
Hardbody Pickup
1995-1997
Maxima
1995-2006
Murano
2003-2007
Pathfinder
1995-2012
Pathfinder Armada
2004-2005
Quest
2004-2009
Sentra
1995-2006
Titan
2004-2012
Xterra
2000-2013
Axxess AXLOC-NIS Manual
Add-On Amplifier OEM Integration Interface for Select 2012-2019 Amplified Lexus and Toyota Vehicles
Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.
AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time!
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Upgrade solution for factory, fixed level, data-bus controlled sound systems
Everything you need in one box to install your choice of aftermarket amplifier(s)
The time-saving design prevents the need for summing and audio correction devices.
Variable volume, fade, balance, bass, mid, and treble audio settings
Retains Bluetooth, navigation, safety system, and all warning chimes
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid, and treble center frequency selection
Plug-n-play installation with two 20-pin connectors (IE Bus)
Remote sub level controller included
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
Harness (IE Bus)
Bass knob
Knob harness
Manual
Applications
Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. See manual for details.
Vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital.
Lexus vehicles equipped with the Mark Levinson system are not compatible.
Lexus vehicles equipped with navigation are not compatible.
Lexus CT200h: Must be equipped with a center channel and a subwoofer
Between 2012-2015 Toyota used two different styles of connectors. In order for the AP4-TY12 to be compatible, the radio must have the 10 / 6-pin BHA1761 style connector. Vehicles equipped with the 20-pin BHA8113 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference.
LEXUS
CT 200H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2014-2017
ES 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
GX 460
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2014-2017
IS 200T
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
IS 250
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2014-2015
IS 300
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
NX 200T
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
NX 300H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
RC 200T
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
RC 300
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
RC 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
RX 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
TOYOTA
4Runner
ALL TRIM LEVELS
—
2014-2018
Avalon
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2013-2014
Avalon
ALL TRIM LEVELS
—
2015-2018
Camry
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2012-2014
Camry
ALL TRIM LEVELS
—
2015-2017
Highlander
ALL TRIM LEVELS
—
2014-2018
Prius
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2012-2015
Prius
ALL TRIM LEVELS
—
2016-2017
Rav4
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2014
Rav4
ALL TRIM LEVELS
—
2015-2018
Sequoia
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness
2013
Sequoia
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2014
Sequoia
ALL TRIM LEVELS
—
2015-2018
Sienna
ALL TRIM LEVELS
—
2015-2017
Tacoma
ALL TRIM LEVELS
—
2014-2018
Tundra
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness
2014-2015
Tundra
ALL TRIM LEVELS
—
2016-2019
Venza
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2013-2014
Venza
ALL TRIM LEVELS
—
2015-2016
Pac Audio AP4-TY12 ManualPac Audio AP4-TY12 Technical Bulletin
Add-On Amplifier OEM Integration Interface for Select 2006-2024 Amplified Lexus and Toyota Vehicles
Easily add amplifier(s) to Toyota and Lexus factory amplified systems without cutting or modifying the original wiring.Simplify speaker wire connections by using the APH-TY04 speaker connection harness when adding aftermarket amplifier(s) to select Toyota and Lexus vehicles. Featuring OEM quality, factory style plugs, the APH-TY04 quickly and securely plugs into the factory amplifier harness allowing an aftermarket amplifier to be more easily installed. Industry-standard wire colors on the APH-TY04 harness make identifying the factory speakers faster and also ensures proper speaker wiring polarity.
Key Features
Perfect for use with AmpPRO AP4-TY11 and AP4-TY12
EIA standard color-coded wires make identifying factory speaker wires and phase easier
APH-TY04 harness eliminates having to run speaker wire throughout the car
18” Harness length
Applications
2018-2020 Toyota Sequoia: Only compatible in models equipped with the 14 speaker system
LEXUS
CT 200H
With factory amplifier
2011-2013
ES 350
With factory amplifier
2007-2012
GS 350
With factory amplifier
2007-2011
GS 450H
With factory amplifier
2007-2011
GX 460
With factory amplifier
2010-2013
HS 250H
With factory amplifier
2010-2012
IS 250
With factory amplifier
2006-2013
IS 350
With factory amplifier
2006-2013
RX 350
With factory amplifier
2008-2012
RX 400H
With factory amplifier
2007-2008
RX 450H
With factory amplifier
2012
TOYOTA
4Runner
With factory JBL amplifier
2010-2017
4Runner
With factory JBL amplifier
2019-2024
Avalon
With factory JBL amplifier
2011-2012
Land Cruiser
With factory JBL amplifier
2008-2011
Sequoia
With factory JBL amplifier
2008-2020
Sienna
With factory JBL amplifier
2011-2020
Tacoma
With factory JBL amplifier
2012-2017
Venza
With factory JBL amplifier
2009-2016
Pac Audio APH-TY04 Manual
Add-On Amplifier OEM Integration Interface for Select 2002-2015 Amplified Lexus and Toyota Vehicles
Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.
AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time!
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Upgrade solution for factory, fixed level, data-bus controlled sound systems
Everything you need in one box to install your choice of aftermarket amplifier(s)
The time-saving design prevents the need for summing and audio correction devices.
Variable volume, fade, balance, bass, mid, and treble audio settings
Retains Bluetooth, navigation, safety system, and all warning chimes
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid, and treble center frequency selection
Plug-n-play installation with two 20-pin connectors (IE Bus)
Remote sub level controller included
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
Harness (IE Bus)
Bass knob
Knob harness
Manual
Applications
Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. See manual for details.
Toyota vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital.
Lexus vehicles must be equipped with a center channel and a subwoofer in order for the AP4-TY11 to be compatible:
Between 2012-2015 Toyota used two different styles of connectors. In order for the AP4-TY11 to be compatible, the radio must have the 20-pin BHA8113 style connector. Vehicles equipped with the 10 / 6-pin BHA1761 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference
Applications
LEXUS
CT 200H
With factory center channel, Without Navigation
2011-2013
ES 300
With factory center channel
2002-2003
ES 300H
With factory center channel, Without Navigation
2013-2014
ES 330
With factory center channel
2004-2006
ES 350
With factory center channel, Without Navigation
2007-2014
GX 460
With factory center channel, Without Navigation
2009-2013
GX 470
With factory center channel
2004-2009
HS 250H
With factory center channel, Without Navigation
2010-2012
IS 250
With factory center channel, Without Navigation
2006-2013
IS 350
With factory center channel, Without Navigation
2006-2013
IS F
With factory center channel, Without Navigation
2010-2012
LS 430
With factory center channel
2001-2006
RX 330
With factory center channel
2004-2006
RX 350
With factory center channel, Without Navigation
2007-2015
RX 400H
With factory center channel
2006-2008
RX 450H
With factory center channel, Without Navigation
2010-2015
TOYOTA
4Runner
With factory JBL amplifier
2003-2013
Avalon
With factory JBL amplifier
2005-2012
Avalon
8113, With factory JBL amplifier
2013-2014
Camry
With factory JBL amplifier
2007-2011
Camry
8113, With factory JBL amplifier
2012-2014
Corolla
With factory JBL amplifier
2005-2011
FJ Cruiser
With factory JBL amplifier
2011-2014
Highlander
With factory JBL amplifier
2008-2013
Land Cruiser
With factory JBL amplifier
2008
Prius
With factory JBL amplifier
2004-2011
Prius
8113, With factory JBL amplifier
2012-2015
Rav4
With factory JBL amplifier
2004-2013
Rav4
8113, With factory JBL amplifier
2014
Sequoia
With factory JBL amplifier
2005-2012
Sequoia
8113, With factory JBL amplifier
2013-2014
Sienna
With factory JBL amplifier
2004-2014
Tacoma
With factory JBL amplifier
2005-2013
Tundra
With factory JBL amplifier
2005-2013
Venza
With factory JBL amplifier
2009-2012
Venza
8113, With factory JBL amplifier
2013-2014
Pac Audio AP4-TY11 Manual
Add-On Amplifier OEM Integration Interface for Select 2014-2019 Amplified Cadillac, Chevy and GMC Vehicles
Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time!
Benefits
Factory sound system upgrade
Time-saving design
Prevents the need for summing and audio correction devices
Reliable PAC quality
Features
Upgrade solution for factory, fixed level, data-bus controlled sound systems
The time-saving design prevents the need for summing and audio correction devices.
Variable volume, fade, balance, bass, mid, and treble audio settings
Retains OnStar, Bluetooth, navigation, safety systems, and all warning chimes
Front, rear, sub, and center channel preamp outputs (5 volt RMS)
Provides full range, flat audio output for a solid audio foundation
Customized OE bass, mid, and treble center frequency selection
Plug-n-play installation
Remote sub level controller INCLUDED
Optional TOSLINK optical output with APA-TOS1 (sold separately)
Includes
AmpPRO module
Harness
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-GM02 harness (sold separately)
Applications
Must have BOSE factory sound system.
Must have Infotainment system RPO code IO5 or IO6 to be compatible.
To verify the "IO" RPO code on your vehicle, check the glove compartment or spare tire well for a silver sticker with these codes. If this sticker is not present, you must scan the QR code on the GM label found in the driver's door jamb. The RPO codes will be listed in alphabetical order in either scenario.
CADILLAC
ATS
8" screen
2015
CT6
8" screen
2017
Escalade
8" screen
2015-2019
CHEVROLET
Camaro
8" screen
2016-2018
Colorado
8" screen
2015-2018
Corvette
8" screen
2014-2019
Cruze
8" screen
2017-2018
Equinox
8" screen
2018
Impala
8" screen
2014-2019
Malibu
8" screen
2016-2018
Silverado
8" screen, Classic model
2019
Silverado
8" screen
2014-2018
Silverado HD
8" screen
2015-2019
Suburban
8" screen
2015-2019
Tahoe
8" screen
2015-2019
Traverse
8" screen
2018-2019
Volt
8" screen
2016-2018
GMC
Acadia
8" screen
2018-2019
Canyon
8" screen
2015-2018
Sierra
8" screen
2014-2018
Sierra HD
8" screen
2015-2019
Terrain
8" screen
2018
Yukon
8" screen
2015-2019
Yukon XL
8" screen
2015-2019
Pac Audio AP4-GM61 ManualPac Audio AP3-GM61 Radio Locations
Add-On Amplifier OEM Integration Interface for Select 2018-UP Amplified Ford Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features.
Benefits
Simplifies amplifier installation
Prevents need for summing and DSP devices
Provides factory sound system upgrade solution
Features
Simplifies amplifier installation in data-bus controlled factory sound systems
Provides variable volume, control, fade, balance, bass, mid, and treble audio settings
Retains warning chimes, navigation prompts, Bluetooth®, and telematics audio (if equipped)
Front, rear, and sub preamp outputs (5V RMS)
Plug-and-play installation with factory-matched harness
Sub level controller included
Optical output included
Applications
Vehicle must be equipped with factory B&O system to be compatible
Factory amplifier must be removed from vehicle when installing this interface
FORD
Bronco
With factory B&O amplifier
2021-2024
Bronco Sport
With factory B&O amplifier
2021-2024
Eco Sport
With factory B&O amplifier
2021
Edge
With factory B&O amplifier
2019-2022
Escape
With factory B&O amplifier
2021-2025
Expedition
With factory B&O amplifier
2018-2023
Explorer
With factory B&O amplifier
2020-2024
F-150
With factory B&O amplifier
2018-2024
F-250
With factory B&O amplifier
2020-2024
F-350
With factory B&O amplifier
2020-2024
F-450
With factory B&O amplifier
2020
Lightning
With factory B&O amplifier
2022
Maverick
With factory B&O amplifier
2022-2024
Mustang
With factory B&O amplifier
2024-2025
Mustang Mach E
With factory B&O amplifier
2021-2024
Ranger
With factory B&O amplifier
2020-2024
Pac Audio AP4-FD31 Manual
Add-On Amplifier OEM Integration Interface for Select 2007-2014 Amplified Ford and Lincoln Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features.
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains Sync, Bluetooth audio, and all warning chimes
Plug & play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
24-pin (MS-CAN)
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-FD01 harness (sold separately)
Applications
This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system. If you are unsure of your vehicle having an amplified system, please contact an authorized Ford service center for further clarification.
FORD
F-150
With or Without factory Sony amplifier
2009-2012
Flex
With or Without factory Sony amplifier
2009-2012
Fusion
With or Without factory Sony amplifier
2010-2012
Taurus
With or Without factory Sony amplifier
2010-2012
LINCOLN
MKS
With or Without factory Sony amplifier
2009-2012
MKT
With or Without factory Sony amplifier
2010-2012
MKX
With or Without factory Sony amplifier
2007-2010
MKZ
With or Without factory Sony amplifier
2007-2012
Navigator
With or Without factory Sony amplifier
2007-2014
Pac Audio AP4-FD11 Manual
Add-On Amplifier OEM Integration Interface for Select 2011-2016 Amplified Chrysler, Dodge and Maserati Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features.
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, and all warning chimes
Plug & play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
22-pin harness (Dual MS-CAN)
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-CH01 harness (sold separately)
Applications
This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer.
CHRYSLER
300
ALL TRIM LEVELS
2011-2014
DODGE
Charger
ALL TRIM LEVELS
2011-2014
Journey
ALL TRIM LEVELS
2011-2015
MASERATI
Ghibli
ALL TRIM LEVELS
2015
Quattroporte
ALL TRIM LEVELS
2014-2016
Pac Audio AP4-CH31 Manual
Add-On Amplifier OEM Integration Interface for Select 2007-2018 Amplified Chrysler, Dodge, Jeep and RAM Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features.
Benefits
Simplifies amplifier installation
It prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it, thanks to the original amplifier's retention.
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, and all warning chimes
Plug & play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
22-pin harness (MS-CAN)
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-CH01 harness (sold separately)
Applications
This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer.
CHRYSLER
Town & Country
With factory amplifier
2008-2016
DODGE
Challenger
With factory amplifier
2008-2014
Charger
With factory amplifier
2008-2010
Durango
With factory amplifier
2011-2013
Durango
With factory amplifier
2009
Grand Caravan
With factory amplifier
2008-2018
RAM 1500, 2500, 3500
With factory amplifier
2009-2012
JEEP
Grand Cherokee
With factory amplifier
2008-2013
Wrangler
JK, With factory amplifier
2018
Wrangler
With factory amplifier
2007-2017
Wrangler Unlimited
JK, With factory amplifier
2018
Wrangler Unlimited
With factory amplifier
2007-2017
RAM
1500, 2500, 3500
With factory amplifier
2010-2012
Pac Audio AP4-CH21 Manual
