At this present time our store location is open by appointment only.

10" Drivers Under 10"

10-Inch Subwoofer Drivers that are Suitable for Enclosures with a Mounting Depth under 10-Inches

10-Inch Subwoofer Drivers that are Suitable for Enclosures with a Mounting Depth under 10-Inches

These 10" drivers are best recommended for subwoofer enclosures with a sub mounting clearance of 10". If your 10-inch sub box has a depth of less than ten-inches then not all of these drivers will fit in your box.

9 products

  • Sale -$45.00Last One! 400W 10" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 43CWR10 400W 10" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 43CWR10, rear view.

    Kicker 43CWR10 : 400W 10" Subwoofer Driver, 4Ω Dual Voice Coil - Discontinued

    1 Available for pickup

    10-Inch 400-Watt Subwoofer Driver, 4-Ohm DVC  The 43CWR10 10" subwoofer by Kicker has an advanced suspension system that includes a ribbed polypropylene surround and a large-diameter spider for linear movement, and a distortion-free sound. Bigger magnets, a thicker cone and an improved suspension system help make this 10-Inch 400W CompR sub to be a workhorse of a driver.The Kicker 43CWR104 12" sub work best with a sealed or ported enclosure and 400 watts of recommended power. Specifications SIZE [in, cm]: 10, 25 IMPEDANCE [Ohms]: 4 DVC Recommended Amplifier Power (watts RMS) 400 Peak Power (watts, per ANSI/CTA-2031-A) 800 SENSITIVITY [dB 1w/1m]: 84.6 MOUNTING DEPTH [in, cm]: 5-1/4, 13.3 MOUNTING DIAMETER [in, cm]: 9-1/8, 23.1 MIN SEALED BOX VOL [cu. ft, L]: 0.8, 22.7 MAX SEALED BOX VOL [cu. ft, L]: 1.25, 35.4 MIN VENTED BOX VOL [cu. ft, L]: 1.25, 35.4 MAX VENTED BOX VOL [cu. ft, L]: 1.75, 49.6 Kicker CompR Subwoofer Manual

    1 Available for pickup

    $129.99$84.99

  • Polk Audio MM1042SVC : 10" 400W Subwoofer Driver, 4Ω Single Voice Coil Polk Audio MM1042SVC : 10" 400W Subwoofer Driver, bottom side.

    Polk Audio MM1042SVC : 10" 400W Subwoofer Driver, 4Ω Single Voice Coil

    Pre-Order Today!

    MM-Series 400-Watt RMS 10-Inch Subwoofer Driver, 4-Ohm SVC The fiberglass-reinforced ABS basket resists flexing during heavy excursion, so your sub hits hard without distorting. Ultra-Marine certification and an IP56 rating. Specifications 10" 4-ohm subwoofer Titanium-plated composite cone Butyl rubber surround Fiberglass-reinforced ABS basket IP56 rating Power handling: 400W RMS Peak power handling: 1200W Frequency response: 28-2000Hz Sensitivity: 86dB @ 1W/1M Top mounting depth: 4.35" Cutout diameter: 9.1" Grille not included Warranty: 1 year Polk Audio MM1 Subwoofer Manual

    Pre-Order Today!

    $119.99

  • Kicker 48CWR10 : 400W 10" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil Kicker 48CWR10 : 400W 10" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil, left side.

    Kicker 48CWR10 : 400W 10" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil

    Pre-Order Today!

    10-Inch 400-Watt Subwoofer Driver, 2-Ohm or 4-Ohm DVC  The 48CWR10 10" subwoofer is available in a 2Ω or 4Ω dual voice coil design, making it easy to get the most out of your amp. An advanced suspension and heat management system helps to keep the bass powerful, deep and consistent – all without a hint of distortion. KICKER developed Forced Air Cooling to helps their subs run 25% cooler.The Kicker 48CWR102 and 48CWR104 12" subs work best with a sealed or ported enclosure and 400 watts of recommended power. Specifications SIZE [in, cm]: 10, 25 IMPEDANCE [Ohms]: 2 or 4 DVC Recommended Amplifier Power (watts RMS) 400 Peak Power (watts, per ANSI/CTA-2031-A) 800 SENSITIVITY [dB 1w/1m]: 84.6 MOUNTING DEPTH [in, cm]: 5-1/4, 13.3 MOUNTING DIAMETER [in, cm]: 9-1/8, 23.1 MIN SEALED BOX VOL [cu. ft, L]: 0.8, 22.7 MAX SEALED BOX VOL [cu. ft, L]: 1.25, 35.4 MIN VENTED BOX VOL [cu. ft, L]: 1.25, 35.4 MAX VENTED BOX VOL [cu. ft, L]: 1.75, 49.6 Kicker CompR Subwoofer Manual

    Pre-Order Today!

    $149.99

  • Alpine S-W10D : 10" 600W Subwoofer Driver, 2Ω or 4Ω DVC

    Alpine S-W10D : 10" 600W Subwoofer Driver, 2Ω or 4Ω DVC

    Pre-Order Today!

    Alpine S-Series 600-Watt 10-Inch Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications. Specifications 10" DVC High Performance Subwoofer Power Handling: 600W RMS/1800W Peak Push-type Insert Terminals with DVC jumper system Concealed Mount Gasket/Grille* System (*Grille sold separately) Frequency Response: 28Hz-200Hz Mounting Depth 4-11/16” Alpine S-W10D2, S-W10D4 Manual

    Pre-Order Today!

    $179.99

  • 500W 10" Square Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 45L7R10 500W 10" Square Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 45L7R10 side view.

    Kicker 45L7R10 : 500W 10" Square Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil

    Pre-Order Today!

    10-Inch 500-Watt Square Subwoofer Driver, 2-Ohm or 4-Ohm DVC This L7 series 10" square woofer by Kicker hosts a heavy-duty motor structure that includes a large-diameter spider for less flex, longer life and superior accuracy. On board the chassis of this 500W driver you will find dual high-temp voice coils, an injection-molded polypropylene cone, SoloKon™ 360-degree back bracing, ribbed santoprene surround with blue stitching and a UniPlate™ back plate and pole piece, plus perimeter venting for thermal heat management. The Kicker 45L7R102 and 45L7R104 square subwoofers are rated for 500W of RMS amplified power. Specifications SIZE [in, cm]: 10, 25 IMPEDANCE [Ohms]: 2 or 4 DVC Recommended Amplifier Power (watts RMS) 500 Peak Power (watts, per ANSI/CTA-2031-A) 1000 SENSITIVITY [dB 1w/1m]: 85.9 MOUNTING DEPTH [in, cm]: 6 1/8, 15.7 MOUNTING DIAMETER [in, cm]: 9 5/16, 23.7 MIN SEALED BOX VOL [cu. ft, L]: .66, 18.7 MAX SEALED BOX VOL [cu. ft, L]: 1, 28.3 MIN VENTED BOX VOL [cu. ft, L]: 1.25, 35.4 MAX VENTED BOX VOL [cu. ft, L]: 2.25, 63.7 Kicker L7R Subwoofer Manual

    Pre-Order Today!

    $219.99

  • 750W 10" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 42CWQ10 750W 10" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 42CWQ10, side view.

    Kicker 42CWQ10 : 750W 10" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil

    Pre-Order Today!

    10-Inch 750-Watt Subwoofer Driver, 2-Ohm or 4-Ohm DVC The 10" CompQ audiophile competition subwoofer driver by Kicker is the pinnacle of Kicker's round speaker line, with nearly identical construction and performance as the L7 Series square subs. The Kicker 42CWQ102 and 42CWQ104 have a 750W RMS power handling and extremely accurate bass reproduction featuring a ribbed Santoprene® surround and a BlueLace™ large-diameter progressive roll spider for extreme flexibility at 750-Watts of Continuous Power. The CompQ 10-Inch sub works best with a sealed or ported enclosure with 750 watts of recommended power. See below for more details. Specifications Rated Impedance [Ω] 2 or 4 DVC Fs [Hz 38 Sensitivity [1W, 1m] 85.7 Qts 0.437 Qms 8.916 Qes 0.46 Re [Ω] 6.52 Vas [ft³, L] .59, 16.75 Recommended Amplifier Power (watts RMS) 700 Outer Frame Dimension [in, cm] 10 11/16, 27.2 Mounting Depth [in, cm] 6 3/8, 16.2 Mounting Cutout [in, cm] 9 3/16, 23.4 Frequency Response [Hz] 24 – 100 Kicker CompQ Subwoofer Manual

    Pre-Order Today!

    $279.99

  • JL Audio 10W3v3 : 10-Inch 500-Watt Subwoofer Driver, 2-Ohm or 4-Ohm SVC, front side view. JL Audio 10W3v3 : 10-Inch 500-Watt Subwoofer Driver, 2-Ohm or 4-Ohm SVC

    JL Audio 10W3v3 : 500W 10" Subwoofer Driver, 2Ω or 4Ω Single Voice Coil

    2 Available for pickup

    W3-Series 10-Inch 500-Watt Subwoofer Driver, 2-Ohm or 4-Ohm SVC The JL Audio 10W3v3 subwoofer driver has excellent power handling, reasonable enclosure requirements, and a long excursion for its chassis to deliver excellent bass reproduction in 500W RMS power applications. JL Audio technologies and proprietary assembly designs in the 10W3v3-2 and 10W3v3-4 subwoofers enhance linearity and reliable performance results. The JL Audio 10W3v3 is best used with an amplifier in the 150W - 500W RMS range and is optimized to operate in a compact 0.625 cu. ft. (17.7  l) sealed enclosure, or a 1.25 cu. ft. (35.4 l) ported enclosure. General Specifications Continuous Power Handling 500W RMS Recommended Amplifier Power 150- 500W RMS Nominal Impedance 2Ω JL Audio 10W3v3 Manual

    2 Available for pickup

    $359.99

  • 600W 10" Subwoofer Driver, 4Ω Dual Voice Coil : JL Audio 10W6v3, shown with grille. JL Audio 10W6v3 : 10-inch 600-Watt Subwoofer Driver, 4-Ohm DVC

    JL Audio 10W6v3 : 600W 10" Subwoofer Driver, 4Ω Dual Voice Coil

    Pre-Order Today!

    W6-Series 10-Inch 600-Watt Subwoofer Driver, 4-Ohm DVC The 10W6v3 subwoofer driver offers several technologies similar to JL Audio's W7AE top line of subwoofers to provide powerful advantages in motor linearity and suspension behavior. This 10" automotive sub has a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance. This 10" W6v3 driver is best used with an amplifier in the 200W - 600W RMS range and is optimized to operate in a sealed enclosure with only 0.55 cu. ft. (15.6 l) of air space, or a 0.75 cu. ft. (21.2 l) ported enclosure. The JL Audio 10W6V3-D4 subwoofer driver comes with Dual 4Ω voice coils that allow the 10W6v3 to be installed in a 2Ω or 8Ω configuration. General Specifications Continuous Power Handling 600W RMS Recommended Amplifier Power 200 - 600W RMS Nominal Impedance Dual 4Ω JL Audio 10W6v3 Manual

    Pre-Order Today!

    $799.99

  • JL Audio 10W7AE : 10-Inch 750-Watt Subwoofer Driver, 3-Ohm SVC, 10th Anniversary Edition JL Audio 10W7AE : 10-Inch 750-Watt Subwoofer Driver, 3-Ohm SVC, 10th Anniversary Edition, side view.

    JL Audio 10W7AE : 750W 10" Subwoofer Driver, 3Ω Single Voice Coil

    Pre-Order Today!

    W7-Series 10-Inch 750-Watt Subwoofer Driver, 3-Ohm SVC The audiophile 10W7AE subwoofer driver delivers amazing excursion capability while maintaining undeniable tracking accuracy under power in the low end sound spectrum. This 10" W7AE sub is best used with an amplifier in the 300W - 750W RMS range and is optimized to operate in a 1.25 cu. ft. (35.4 l) sealed enclosure, or a 1.5 cu. ft. (42.5 l) ported enclosure. The JL Audio 10W7AE-3 Anniversary Edition subwoofer driver is the 10th Anniversary of the launch of the JL W7 subwoofers. They are identical to the original W7's drivers but they are distinguished by the following cosmetic differences: Satin-Black Powdercoated Baskets Bright Anodized Surround Clamp Ring Anniversary Edition Cone Badge Anniversary Edition Terminal Label  General Specifications Continuous Power Handling 750W RMS Recommended Amplifier Power 300W - 750W RMS Nominal Impedance 3Ω JL Audio 10W7AE Manual

    Pre-Order Today!

    $999.99

Login

Forgot your password?

Don't have an account yet?
Create account