Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
R-Series 6-Channel Class-D Full-Range Hi-Resolution Automotive-Grade Amplifier, 75-Watts x 4-Channel @ 4-Ohm + 250-Watts x 2-Channels @ 2-Ohm
The R-A90S has a unique staggered power channel layout that has double the power on the last two channels. When looking to power a dual subwoofer configuration, the R-A90S’s 5th and 6th channels can be bridged to provide up to 500-watts at 4Ω. The R-A90S is matched in power and performance for the Dual 10-inch Alpine Halo S-Series Preloaded Subwoofer Enclosures with ProLink™.
Thanks to the unique staggered power channel layout, the R-A90S can host different levels of power on each channel, compared to traditional, multi-channel amplifiers. This allows the R-A90S to grow with you as it can effectively function as both a 3-way active amplifier and a 5-channel amplifier by delivering the power you need to the channels where you need it the most.
Hear the subtle details you’ve been missing in your music. The R-A90S maintains an extremely low phase shift throughout the music spectrum, which minimizes audible imperfections in your music and allows your music to stay faithful to the original recording. With a hi-resolution frequency response, the R- A90S can reproduce sound with incredible accuracy that stays true to the artist’s intention.
Using custom Alpine internal components originally launched in Alpine’s premium X-Series amplifiers, the R-A90S has dual post-filter feedback loops that correct signal distortion by making the output as close as possible to the original input for accurate sound reproduction.
For the best possible sound experience, use the built-in bandpass, high pass, or low pass filter to individually power each component in your sound system and assign frequency bands for accurate and reliable sound reproduction.
The R-A90S has input capability to add an optional RUX-KNOB.2 Remote Bass Control Knob (sold separately). The remote bass knob controls the bass in your subwoofer by adjusting the gain on your amplifier for quick bass adjustments when needed.
Alpine’s R-Series line of speakers, subwoofers, and amplifiers have a heritage of sound quality that can be heard from a block away. The R-A90S is tuned to emphasize the characteristics of the R- Series speakers and subwoofers for a legendary R-Series experience.
Features
6-Channel Amp with 5-Channel Power– With double the power on the last two channels, the R-A90S’s 5th and 6th channels can be bridged to provide up to 500-watts at 4Ω to a subwoofer system such as a pair of S-SB12Vs.
An Amp that Grows with You – When you’re ready to upgrade your Alpine system, use the R-A90S to amplify a 3-way active system with enough mid-bass power to create the up-front bass impact you crave.
Accurate Sound Reproduction – With incredibly low phase shift and hi-resolution frequency response, the R-A90S can reproduce sound with incredible accuracy that stays true to the artist’s intention.
Specifications
Dimensions: 12.75" x 10.75" x 2"
Hi-Resolution Audio Compliant (40k Hz)
Alpine’s Class D Amplifier Circuit
75W x 4 + 150W x 2 (4Ω, 14.4V, < 1% THD +N)
100W x 4 + 250W x 2 (2Ω, 14.4V, < 1% THD +N)
Bridged: 200W x 2 + 500W x 1 (4Ω, 14.4V, < 1% THD +N)
S/N > 85dB (ref. 1W into 4Ω)
THD + N < 0.03% (ref. 10W into 4Ω)
Frequency response: 10-45kHz (0/-3dB)
Damping factor > 500
CTA-2006
Alpine R-A90S Manual
Six-Channel Line-Converter with DSP and Optional Add-on Hi-Res Digital Output, Bluetooth Media Player Upgradable
Use the AXDSP-L with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to six channels of analog signal for use with an aftermarket amplifier or DSP. While this may be a “Lite” version, it still provides retention of many important vehicle functions. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits. There are four inputs and six outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10 ms.
2-Channel Digital Output Upgradeable with AXDSP-SP (sold separately)Convertible to a Media Receiver with AXDSPL-BT (sold separately)
15-band graphic EQ on each channel with high pass, low pass, and bandpass filters
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Selectable Graphic or Parametric EQ
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Chime control for GM/Chrysler vehicles
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains OE voice prompts (Sync® and OnStar®)
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Micro “B” USB updatable
1-year limited warranty
Axxess AXDSP-L Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Amplifier Add-On OEM Line-Converter & T-Harness for Select 2011-UP SPDIF-Amplified Hyundai and KIA Vehicles
Upgrade your sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness along with an amplifier bypass harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains OE voice prompts (Blue Link®/UVO) with adjustable level
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Designed for S/PDIF amplified models
Retains the ability to work with S/PDIF digitally controlled amplified systems
Factory amplifier does NOT need to be retained
Wiring to be completed at the amplifier location
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Micro “B” USB updatable
1-year limited warranty
Applications - confirmed as of 2/7/2023
HYUNDAI
Azera
2012-2017
Elantra
2011-2016
Equus
2011-2016
Sonata
2011-2022
Tucson
2011-2019
Veloster
2012-2017
KIA
Cadenza
2014-2016
Optima
2011-2018
Soul
2012-2016
Sportage
2011-2016
Axxess AXDSPL-HK2 Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Amplifier Add-On OEM Line-Converter & T-Harness for Select 2017-UP SPDIF-Amplified Hyundai and KIA Vehicles
Upgrade your sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness along with an amplifier bypass harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains OE voice prompts (Blue Link®/UVO) with adjustable level
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Designed for S/PDIF amplified models
Retains the ability to work with S/PDIF digitally controlled amplified systems
Factory amplifier does NOT need to be retained
Wiring to be completed at the amplifier location
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Micro “B” USB updatable
1-year limited warranty
Applications - confirmed as of 2/7/2023
Hyundai
2017-2020
Elantra
2018-2022
Elantra GT
2018-2022
Kona
2013-2022
Santa Fe
KIA
2017-2020
Cadenza
2019-2022
Forte
2019-2020
Niro (EV)
2020-2022
Niro (Hybrid Electrical)
2018-2020
Niro (Plug-In Hybrid)
2019-2022
Optima
2017-2022
Sorento
2017-2022
Soul
2020-2022
Soul EV
2017-2022
Sportage
Axxess AXDSPL-HK4 Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Six-Channel Water Resistant Line-Converter with DSP and Optional Add-on Hi-Res Digital Output, Bluetooth Media Player Upgradable
Upgrade your sound system with this universal DSP “Lite” designed for outdoor vehicles. It features a water-resistant enclosure and zip tie mounts to keep it in place and protected from the elements. This solution is ideal for motorcycles, powersports vehicles, boats, and other outdoor vehicles that could expose the DSP to moisture and heavy vibration. This DSP can be used with OE or aftermarket radios and has an internal header port for adding a wireless streaming interface module (the AXDSPL-BT, which is sold separately) if the vehicle does not have a receiver/head unit.
2-Channel Digital Output Upgradeable with AXDSP-SP (sold separately)Convertible to a Media Receiver with AXDSPL-BT (sold separately)
15 Band graphic EQ
4 inputs and 6 individually assignable outputs
Independent equalization for front, rear, and sub
Independent crossover for front, rear, and sub
Selectable slope (12, 24, 36, or 48db per octave)
Front and rear channels can be delayed independently up to 10ms
Easy behind the radio installation in most applications
Water resistant enclosure with zip tie mounts included
Can be used with OE and aftermarket radios
Chime control for GM/Chrysler vehicles
Clipping detection and limiting circuits
Internal header port for adding a Bluetooth interface module
Bass knob included
Retains OE voice prompts (SYNC® and OnStar®)
Retains factory chimes including parking sensor and cross path
detection alerts
Settings adjusted via Bluetooth® in a smart device application (tablet or mobile phone), compatible with both Android™ and Apple® devices
Read, write, and store configurations for future recall
Password protect feature available in the mobile app
Micro-B USB updatable
Axxess AXDSPL-WR Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
6-Channel Class-D Full-Range Amplifier with Integrated DSP, 100-Watt x 6 @ 2-Ohm / 75-Watt x 6 @ 4-Ohm
Designed to simplify great audio, every VXi amplifier combines JL's advanced NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.
With JL's second-generation NexD2™ technology, the VX600/6i full-range amplifier outputs up to 75 watts per channel into 4 ohms, or 100 watts into 2 ohms. It can also be bridged into 4 ohms, producing up a rock-solid 200 W x 3.
The NexD2™ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces.
Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN™ Software application installed.
Amplifier includes: Power Connector (for 4 AWG wire), Analog Input/Pre-Out Harness, Speaker Output Harness, 6 ft A/B USB Cable
TüN™ Software Applications
Intuitive setup and tuning, all at your fingertips. Automatically recognizes connected amplifier and displays appropriate interface. TüN™ is available for download for free in a variety of applications, for computers and most handheld devices.
Unprecedented, Onboard DSP Tuning Power
Premium, triple-core AKM® DSP with an optimized configuration, developed in collaboration with AKM®
Hi-Res audio processing at 24 bit/96 kHz
High-performance AKM® A/D and D/A converters
10 Bands of fully parametric EQ, per output channel, including pre-outs
Shelving EQ option for Band 1 and Band 10
High-Pass & Low-Pass Filters for each output channel, with selectable alignments and slopes: Linkwitz-Riley: 12, 24, 48 dB/octaveButterworth: 6, 12, 18, 24, 36, 48 dB/octave
Signal Delay in 0.01 millisecond steps (equivalent to 1/8-inch, 3 mm)
All-Pass Filter (Phase EQ), with variable "Q" and corner frequency
Polarity Reversal (0 or 180 deg.)
Output Level Trim in 0.1 dB steps
NexD2™ Switching Amplifier Technology
JL's latest generation of high-speed switching technology delivers superb low frequency power and efficiency.
Specially optimized for subwoofer applications
Ultra-Versatile Analog and Digital Inputs
High-performance, differential-balanced analog inputs for outstanding noise rejection
Accepts speaker level signals from 200 mV, up to 16V RMS, including those from many factory systems
Optical Digital (Toslink) input permits direct connection of S/PDIF digital sources, bypassing A/D converter. Accepts up to 24 bit/192 kHz input.
Independently configurable RCA analog and digital pre-outs (24 bit/96 kHz)
Automatic turn-on options via Signal-Sensing or DC-Offset sensing
Functional Compact Chassis Design
Solid cast alloy main unibody and bottom plate deliver superb EMI performance and shielding
All connections utilize compact mating connectors for maximum integrity and fitment into tight spaces.
Configurable LED logo ring displays status and can display audio preset color code or user-defined color
Logo badge can be oriented in 90 degree increments
Corner caps engineered to conceal mounting holes and hardware
JLid™ System Command and Control with Networking Capabilities
JL Audio's digital protocol provides control interface and communication between VXi amplifiers and optional JLid™ accessories, including:
DRC-100/DRC-200/DRC-205 Digital Remote Controllers: Offers convenient level and DSP preset control from the driver's seat.
VXi-BTC Bluetooth® Communicator: Permits wireless configuration of VXi amplifiers using your compatible Apple® or Android® device.
VXi-HUB Optical Network Hub: Provides network connectivity for up to five slave VXi amplifiers, allowing synchronization of DRC controllers and DSP presets. Up to two VXi-HUBs can be daisy-chained to network up to ten VXi amplifiers.
Specifications
Frequency Response
12 Hz - 24 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power (Analog Inputs)
99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W (Analog Inputs)
80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to highest rated power (Digital Inputs)
99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W (Digital Inputs)
80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ω
>100 / 50 Hz
Damping Factor @ 2 Ω
>50 / 50 Hz
THD+N @ Rated Power
<1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs
200 mV - 16 V RMS
Min.Copper Power / Ground Wire Gauge
4 AWG wire
Fuse Rating
50 A (AFS, AGU or MaxiFuse™)
@ 4 Ω
75 W RMS x 6
@ 2 Ω
100 W RMS x 6
Bridged @ 4Ω
200 W RMS x 3
JL Audio VX600/6i Manual
Add-On Amplifier OEM Integration Interface for Select 2007-2018 Amplified Chrysler, Dodge, Jeep and RAM Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features.
Compatibility Note: This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer.
Benefits
Simplifies amplifier installation
It prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it, thanks to the original amplifier's retention.
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, and all warning chimes
Plug & play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
22-pin harness (MS-CAN)
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-CH01 harness (sold separately)
Applications
Year(s)
Make
Model
Trim Level
Additional Info
2008-2016
CHRYSLER
TOWN & COUNTRY
ALL TRIM LEVELS
—
2008-2014
DODGE
CHALLENGER
ALL TRIM LEVELS
—
2008-2010
DODGE
CHARGER
ALL TRIM LEVELS
—
2009, 2011-2013
DODGE
DURANGO
ALL TRIM LEVELS
—
2008-2018
DODGE
GRAND CARAVAN
ALL TRIM LEVELS
—
2009-2012
DODGE
RAM TRUCK
ALL TRIM LEVELS
—
2008-2013
JEEP
GRAND CHEROKEE
ALL TRIM LEVELS
—
2007-2017
JEEP
WRANGLER
ALL TRIM LEVELS
—
2018
JEEP
WRANGLER
JK
—
2007-2017
JEEP
WRANGLER UNLIMITED
ALL TRIM LEVELS
—
2018
JEEP
WRANGLER UNLIMITED
JK
—
2010-2012
RAM
RAM TRUCK
ALL TRIM LEVELS
—
Pac Audio AP4-CH21 Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Add-On Amplifier OEM Integration Interface for Select 2011-2016 Amplified Chrysler, Dodge and Maserati Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features.
Compatibility Note: This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer.
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, and all warning chimes
Plug & play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
22-pin harness (Dual MS-CAN)
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-CH01 harness (sold separately)
Applications
Year(s)
Make
Model
Trim Level
Additional Info
2011-2014
CHRYSLER
300
ALL TRIM LEVELS
—
2011-2014
DODGE
CHARGER
ALL TRIM LEVELS
—
2011-2015
DODGE
JOURNEY
ALL TRIM LEVELS
—
2015
MASERATI
GHIBLI
ALL TRIM LEVELS
—
2014-2016
MASERATI
QUATTROPORTE
ALL TRIM LEVELS
—
Pac Audio AP4-CH31 Manual
Add-On Amplifier OEM Integration Interface for Select 2013-2022 Amplified Chrysler, Dodge, Jeep, Maserati and RAM Vehicles
This latest version of the Pac-Audio AmpPRO simplifies the installation of upgraded amplifiers in select non-amplified and amplified sound systems With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features.
Benefits
Simplifies amplifier installation
Prevents need for summing and DSP devices
Provides factory sound system upgrade solution
Provides flat audio output for a solid audio foundation
Features
Can be used to upgrade the entire sound system or just part of it thanks to retention of the original amplifier
Enables the addition of a subwoofer to an amplified sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, Navigation prompts, and all warning chimes
Plug-n-Play installation
Sub level controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
52-pin harness (MS-CAN)
Bass knob with harness
Manual
Also available for fast, easy install: APH-CH01 harness (sold separately)
Select non-amplified vehicles are equipped with an ANC system that requires bypass. Plug-n-Play bypass harness: ANC-CH01
Current Vehicle Compatibility as of 1/25/2023
Year(s)
Make
Model
Trim Level
Additional Info
2015-2017
CHRYSLER
200
ALL TRIM LEVELS
—
2015-2022
CHRYSLER
300
ALL TRIM LEVELS
—
2017-2022
CHRYSLER
PACIFICA
ALL TRIM LEVELS
—
2015-2022
DODGE
CHALLENGER
ALL TRIM LEVELS
—
2015-2022
DODGE
CHARGER
ALL TRIM LEVELS
—
2014-2020
DODGE
DURANGO
ALL TRIM LEVELS
—
2021
DODGE
DURANGO
ALL TRIM LEVELS
10.1" Screen
2021
DODGE
DURANGO
ALL TRIM LEVELS
8.4" Screen
2013-2021
DODGE
RAM TRUCK
ALL TRIM LEVELS
—
2022
DODGE
RAM TRUCK
NON-CLASSIC
—
2015-2021
JEEP
CHEROKEE
ALL TRIM LEVELS
—
2020-2022
JEEP
GLADIATOR
ALL TRIM LEVELS
—
2014-2021
JEEP
GRAND CHEROKEE
ALL TRIM LEVELS
—
2022
JEEP
GRAND CHEROKEE
WK
—
2018-2022
JEEP
WRANGLER
JL
—
2021-2022
JEEP
WRANGLER
4XE
—
2018-2022
JEEP
WRANGLER UNLIMITED
JL
—
2018
MASERATI
LEVANTE
ALL TRIM LEVELS
—
2017
MASERATI
QUATTROPORTE
ALL TRIM LEVELS
—
2013-2021
RAM
RAM TRUCK
ALL TRIM LEVELS
—
2022
RAM
RAM TRUCK
NON-CLASSIC
—
Pac Audio AP4-CH41 R.2 ManualPac Audio AP4-CH41 ANC and Amplifier LocationsPac Audio AP4-CH41 R.2 Technical Bulletin
Compatible with both amplified and non-amplified factory systems.
Jeep Cherokee, Chrysler 200, and Maserati: These vehicles must be equipped with a factory amplifier as the AP4 cannot reprogram the factory radio to think that an amplifier is present.
When installing into any of the following vehicles, the APHCH42 is required (sold separately):
Year(s)
Make
Model
Trim Level
Additional Info
2021-2022
CHRYSLER
PACIFICA
ALL TRIM LEVELS
—
2021
DODGE
DURANGO
ALL TRIM LEVELS
10.1" Screen
2022
DODGE
RAM TRUCK
NON-CLASSIC
—
2022
RAM
RAM TRUCK
NON-CLASSIC
—
Amplified Vehicles
Compatible with all data-bus controlled amplified systems, no matter the screen size (including the new 12" screen). To identify these systems, look for logos on door speakers, tweeters, dash speakers or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats or Harman Kardon. Some vehicles may not always have branded compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer.
Non-Amplified Vehicles
Jeep Wrangler/Gladiator: Compatible with all screen sizes (5”, 7”, and 8”).
All other models: Only compatible in vehicles equipped with the 7” or 8” screen. Vehicles equipped with the 5” screen are not compatible.
If you are installing the AmpPRO in a vehicle that is not equipped with a factory amplifier, you must add an amplifier to the vehicle's speakers, as the factory radio will no longer have a 4 channel variable output after it has been re-configured by the AmpPRO. For example, this will not work to add only a subwoofer to a non-amplified vehicle, as the radio will no longer power the cabin speakers properly.
Non-amplified vehicles equipped with an Active Noise Cancellation (ANC) system require the ANC module to be bypassed. This can be done manually or with the ANC bypass harness ANC-CH01 (coming soon). Click here to see how to tell the difference between an amplifier and an ANC module and for module locations.
The following vehicles have an ANC module that needs to be bypassed:
2017-2019 Chrysler Pacifica
2015-2016 Jeep Grand Cherokee
2019 RAM Truck (Non-Classic)
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Add-On Amplifier OEM Integration Interface for Select 2007-2014 Amplified Ford and Lincoln Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features.
Compatibility Note: This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system. If you are unsure of your vehicle having an amplified system, please contact an authorized Ford service center for further clarification.
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains Sync, Bluetooth audio, and all warning chimes
Plug & play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
24-pin (MS-CAN)
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-FD01 harness (sold separately)
Applications
Year(s)
Make
Model
Trim Level
Additional Info
2009-2012
FORD
F-150
ALL TRIM LEVELS
—
2009-2012
FORD
FLEX
ALL TRIM LEVELS
—
2010-2012
FORD
FUSION
ALL TRIM LEVELS
—
2010-2012
FORD
TAURUS
ALL TRIM LEVELS
—
2009-2012
LINCOLN
MKS
ALL TRIM LEVELS
—
2010-2012
LINCOLN
MKT
ALL TRIM LEVELS
—
2007-2010
LINCOLN
MKX
ALL TRIM LEVELS
—
2007-2012
LINCOLN
MKZ
ALL TRIM LEVELS
—
2007-2014
LINCOLN
NAVIGATOR
ALL TRIM LEVELS
—
Pac Audio AP4-FD11 Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Add-On Amplifier OEM Integration Interface for Select 2011-2020 Amplified Ford and Lincoln Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features.
Benefits
Simplifies amplifier installation
Prevents need for summing and DSP devices
Provides factory sound system upgrade solution
Features
Can be used to upgrade the entire sound system or just part of it thanks to retention of original amplifier
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains Sync, Bluetooth audio and all warning chimes
Plug & play installation
Sub level controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
24-pin and 54-pin harness (MS CAN) (Dual MS CAN)
Bass knob
Knob harness
Manual
Also available for fast easy install: APH-FD01 harness (sold separately)
Applications - confirmed through 2/3/2023
Year(s)
Make
Model
Trim Level
Additional Info
2015-2017
FORD
EDGE
ALL TRIM LEVELS
—
2016
FORD
ESCAPE
ALL TRIM LEVELS
—
2015-2017
FORD
EXPEDITION
ALL TRIM LEVELS
—
2011-2018
FORD
EXPLORER
ALL TRIM LEVELS
—
2013-2017
FORD
F-150
ALL TRIM LEVELS
—
2013-2019
FORD
F-250
ALL TRIM LEVELS
—
2013-2019
FORD
F-350
ALL TRIM LEVELS
—
2013-2019
FORD
F-450
ALL TRIM LEVELS
—
2013-2019
FORD
F-550
ALL TRIM LEVELS
—
2012-2017
FORD
FOCUS
ALL TRIM LEVELS
—
2013-2016
FORD
FUSION
ALL TRIM LEVELS
—
2019-2020
FORD
MUSTANG
ALL TRIM LEVELS
—
2013-2015
FORD
TAURUS
ALL TRIM LEVELS
—
Pac Audio AP4-FD21 Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Add-On Amplifier OEM Integration Interface for Select 2018-2022 Amplified Ford Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features.
Benefits
Simplifies amplifier installation
Prevents need for summing and DSP devices
Provides factory sound system upgrade solution
Features
Simplifies amplifier installation in data-bus controlled factory sound systems
Provides variable volume, control, fade, balance, bass, mid, and treble audio settings
Retains warning chimes, navigation prompts, Bluetooth®, and telematics audio (if equipped)
Front, rear, and sub preamp outputs (5V RMS)
Plug-and-play installation with factory-matched harness
Sub level controller included
Optical output included
Applications - confirmed as of 2/4/2023
Year(s)
Make
Model
Trim Level
Additional Info
2021
FORD
BRONCO
ALL TRIM LEVELS
—
2021
FORD
BRONCO SPORT
ALL TRIM LEVELS
—
2021
FORD
ECO SPORT
ALL TRIM LEVELS
—
2019-2022
FORD
EDGE
ALL TRIM LEVELS
—
2021-2022
FORD
ESCAPE
ALL TRIM LEVELS
—
2018-2020
FORD
EXPEDITION
ALL TRIM LEVELS
—
2020-2022
FORD
EXPLORER
ALL TRIM LEVELS
—
2018-2022
FORD
F-150
ALL TRIM LEVELS
—
2020-2022
FORD
F-250
ALL TRIM LEVELS
—
2020
FORD
F-350
ALL TRIM LEVELS
—
2020
FORD
F-450
ALL TRIM LEVELS
—
2022
FORD
LIGHTNING
ALL TRIM LEVELS
—
2022
FORD
MAVERICK
ALL TRIM LEVELS
—
2021
FORD
MUSTANG MACH E
ALL TRIM LEVELS
—
2020
FORD
RANGER
ALL TRIM LEVELS
—
Pac Audio AP4-FD31 Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Add-On Amplifier OEM Integration Interface for Select 2014-2019 Amplified Cadillac, Chevy and GMC Vehicles
Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time!
Benefits
Factory sound system upgrade
Time-saving design
Prevents the need for summing and audio correction devices
Reliable PAC quality
Features
Upgrade solution for factory, fixed level, data-bus controlled sound systems
The time-saving design prevents the need for summing and audio correction devices.
Variable volume, fade, balance, bass, mid, and treble audio settings
Retains OnStar, Bluetooth, navigation, safety systems, and all warning chimes
Front, rear, sub, and center channel preamp outputs (5 volt RMS)
Provides full range, flat audio output for a solid audio foundation
Customized OE bass, mid, and treble center frequency selection
Plug-n-play installation
Remote sub level controller INCLUDED
Optional TOSLINK optical output with APA-TOS1 (sold separately)
Includes
AmpPRO module
Harness
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-GM02 harness (sold separately)
Applications - confirmed as of 2/4/2023
Year(s)
Make
Model
Trim Level
Additional Info
2015
CADILLAC
ATS
ALL TRIM LEVELS
—
2017
CADILLAC
CT6
ALL TRIM LEVELS
—
2015-2019
CADILLAC
ESCALADE
ALL TRIM LEVELS
—
2016-2018
CHEVROLET
CAMARO
ALL TRIM LEVELS
—
2015-2018
CHEVROLET
COLORADO
ALL TRIM LEVELS
—
2014-2019
CHEVROLET
CORVETTE
ALL TRIM LEVELS
—
2017-2018
CHEVROLET
CRUZE
ALL TRIM LEVELS
—
2018
CHEVROLET
EQUINOX
ALL TRIM LEVELS
—
2014-2016
CHEVROLET
IMPALA
NON-CLASSIC
—
2017-2019
CHEVROLET
IMPALA
ALL TRIM LEVELS
—
2016
CHEVROLET
MALIBU
NON-CLASSIC
—
2017-2018
CHEVROLET
MALIBU
ALL TRIM LEVELS
—
2014-2018
CHEVROLET
SILVERADO
ALL TRIM LEVELS
—
2019
CHEVROLET
SILVERADO
CLASSIC
—
2015-2019
CHEVROLET
SILVERADO HD
ALL TRIM LEVELS
—
2015-2019
CHEVROLET
SUBURBAN
ALL TRIM LEVELS
—
2015-2019
CHEVROLET
TAHOE
ALL TRIM LEVELS
—
2018-2019
CHEVROLET
TRAVERSE
ALL TRIM LEVELS
—
2016-2018
CHEVROLET
VOLT
ALL TRIM LEVELS
—
2018-2019
GMC
ACADIA
ALL TRIM LEVELS
—
2015-2018
GMC
CANYON
ALL TRIM LEVELS
—
2014-2018
GMC
SIERRA
ALL TRIM LEVELS
—
2015-2019
GMC
SIERRA HD
ALL TRIM LEVELS
—
2018
GMC
TERRAIN
ALL TRIM LEVELS
—
2015-2019
GMC
YUKON
ALL TRIM LEVELS
—
2015-2019
GMC
YUKON XL
ALL TRIM LEVELS
—
Pac Audio AP4-GM61 ManualPac Audio AP3-GM61 Radio Locations
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Add-On Amplifier OEM Integration Interface for Select 2002-2015 Amplified Lexus and Toyota Vehicles
Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.
AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time!
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Upgrade solution for factory, fixed level, data-bus controlled sound systems
Everything you need in one box to install your choice of aftermarket amplifier(s)
The time-saving design prevents the need for summing and audio correction devices.
Variable volume, fade, balance, bass, mid, and treble audio settings
Retains Bluetooth, navigation, safety system, and all warning chimes
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid, and treble center frequency selection
Plug-n-play installation with two 20-pin connectors (IE Bus)
Remote sub level controller included
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
Harness (IE Bus)
Bass knob
Knob harness
Manual
Applications - confirmed of 2/4/2023
Year(s)
Make
Model
Trim Level
Additional Info
2011-2013
LEXUS
CT 200H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2002-2003
LEXUS
ES 300
ALL TRIM LEVELS
For AmpPRO: With Double DIN Radio
2013-2014
LEXUS
ES 300H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2004-2006
LEXUS
ES 330
ALL TRIM LEVELS
For AmpPRO: With Double DIN Radio
2007-2009
LEXUS
ES 350
ALL TRIM LEVELS
—
2010-2014
LEXUS
ES 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2009-2013
LEXUS
GX460
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2004-2009
LEXUS
GX470
ALL TRIM LEVELS
—
2010-2012
LEXUS
HS 250H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2006-2009
LEXUS
IS 250
ALL TRIM LEVELS
—
2010-2013
LEXUS
IS 250
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2006-2009
LEXUS
IS 350
ALL TRIM LEVELS
—
2010-2013
LEXUS
IS 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2012
LEXUS
IS F
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2001-2006
LEXUS
LS 430
ALL TRIM LEVELS
—
2004-2006
LEXUS
RX 330
ALL TRIM LEVELS
—
2007-2009
LEXUS
RX 350
ALL TRIM LEVELS
—
2010-2015
LEXUS
RX 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2006-2008
LEXUS
RX 400H
ALL TRIM LEVELS
—
2010-2015
LEXUS
RX 450H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2003-2013
TOYOTA
4RUNNER
ALL TRIM LEVELS
—
2005-2012
TOYOTA
AVALON
ALL TRIM LEVELS
—
2013-2014
TOYOTA
AVALON
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2007-2011
TOYOTA
CAMRY
ALL TRIM LEVELS
—
2012-2014
TOYOTA
CAMRY
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2005-2011
TOYOTA
COROLLA
ALL TRIM LEVELS
—
2011-2014
TOYOTA
FJ CRUISER
ALL TRIM LEVELS
—
2008-2013
TOYOTA
HIGHLANDER
ALL TRIM LEVELS
—
2008
TOYOTA
LAND CRUISER
ALL TRIM LEVELS
—
2004-2011
TOYOTA
PRIUS
ALL TRIM LEVELS
—
2012-2015
TOYOTA
PRIUS
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2004-2013
TOYOTA
RAV-4
ALL TRIM LEVELS
—
2014
TOYOTA
RAV-4
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2005-2012
TOYOTA
SEQUOIA
ALL TRIM LEVELS
—
2013
TOYOTA
SEQUOIA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style radio harness
2014
TOYOTA
SEQUOIA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2004-2014
TOYOTA
SIENNA
ALL TRIM LEVELS
—
2005-2013
TOYOTA
TACOMA
ALL TRIM LEVELS
—
2005-2013
TOYOTA
TUNDRA
ALL TRIM LEVELS
—
2009-2012
TOYOTA
VENZA
ALL TRIM LEVELS
—
2013-2014
TOYOTA
VENZA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
Pac Audio AP4-TY11 Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Add-On Amplifier OEM Integration Interface for Select 2012-2019 Amplified Lexus and Toyota Vehicles
Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.
AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time!
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Upgrade solution for factory, fixed level, data-bus controlled sound systems
Everything you need in one box to install your choice of aftermarket amplifier(s)
The time-saving design prevents the need for summing and audio correction devices.
Variable volume, fade, balance, bass, mid, and treble audio settings
Retains Bluetooth, navigation, safety system, and all warning chimes
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid, and treble center frequency selection
Plug-n-play installation with two 20-pin connectors (IE Bus)
Remote sub level controller included
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
Harness (IE Bus)
Bass knob
Knob harness
Manual
Applications - confirmed as of 2/4/2023
Year(s)
Make
Model
Trim Level
Additional Info
2014-2017
LEXUS
CT 200H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
LEXUS
ES 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2014-2017
LEXUS
GX 460
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
LEXUS
IS 200T
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2014-2015
LEXUS
IS 250
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
LEXUS
IS 300
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
LEXUS
NX 200T
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
LEXUS
NX 300H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
LEXUS
RC 200T
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
LEXUS
RC 300
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
LEXUS
RC 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
LEXUS
RX 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2014-2018
TOYOTA
4RUNNER
ALL TRIM LEVELS
—
2013-2014
TOYOTA
AVALON
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2015-2018
TOYOTA
AVALON
ALL TRIM LEVELS
—
2012-2014
TOYOTA
CAMRY
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2015-2017
TOYOTA
CAMRY
ALL TRIM LEVELS
—
2014-2018
TOYOTA
HIGHLANDER
ALL TRIM LEVELS
—
2012-2015
TOYOTA
PRIUS
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2016-2017
TOYOTA
PRIUS
ALL TRIM LEVELS
—
2014
TOYOTA
RAV-4
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2015-2018
TOYOTA
RAV4
ALL TRIM LEVELS
—
2013
TOYOTA
SEQUOIA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness
2014
TOYOTA
SEQUOIA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2015-2018
TOYOTA
SEQUOIA
ALL TRIM LEVELS
—
2015-2017
TOYOTA
SIENNA
ALL TRIM LEVELS
—
2014-2018
TOYOTA
TACOMA
ALL TRIM LEVELS
—
2014-2015
TOYOTA
TUNDRA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness
2016-2019
TOYOTA
TUNDRA
ALL TRIM LEVELS
—
2013-2014
TOYOTA
VENZA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2015-2016
TOYOTA
VENZA
ALL TRIM LEVELS
—
Pac Audio AP4-TY12 ManualPac Audio AP4-TY12 Technical Bulletin
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Add-On Amplifier OEM Integration Interface for Select 2018-2021 Amplified Lexus and Toyota Vehicles
Quickly and seamlessly add aftermarket amplifier(s) for improved audio performance while retaining the factory radio. AmpPRO is a Plug-n-Play solution that plugs into the factory radio harness and provides Front/Rear/Sub RCA outputs (5 Volt RMS) to connect to your aftermarket amplifiers. The AmpPRO design avoids the disappointing results and hassle of interfacing after the factory amplifier.
The harness connects to the radio for easier installation.
Provides variable volume, fade, and balance
Provides bass, mid and treble audio settings
Retains warning chimes and navigation prompts
Retains Bluetooth and telematic audio (if equipped)
Front/Rear/Sub RCA outputs (5 Volt RMS)
Includes sub level controller
Optional TOSLINK optical output (APA-TOS1) sold separately.
Optional speaker connection harness (APH-TY02) sold separately.
Applications - confirmed as of 2/4/2023
Year(s)
Make
Model
Trim Level
Additional Info
2019-2021
LEXUS
ES 250
ALL TRIM LEVELS
—
2019-2021
LEXUS
ES 350
ALL TRIM LEVELS
—
2019-2021
LEXUS
NX 300
ALL TRIM LEVELS
—
2019-2021
LEXUS
RX 350
ALL TRIM LEVELS
—
2019-2020
LEXUS
RX 450H
ALL TRIM LEVELS
—
2019-2020
TOYOTA
4RUNNER
ALL TRIM LEVELS
—
2019-2021
TOYOTA
AVALON
ALL TRIM LEVELS
—
2018-2021
TOYOTA
CAMRY
ALL TRIM LEVELS
—
2019
TOYOTA
COROLLA
ALL TRIM LEVELS
—
2020-2021
TOYOTA
HIGHLANDER
ALL TRIM LEVELS
—
2019-2020
TOYOTA
RAV-4
ALL TRIM LEVELS
—
2019-2021
TOYOTA
SEQUOIA
ALL TRIM LEVELS
—
2018-2020
TOYOTA
SIENNA
ALL TRIM LEVELS
—
2019-2021
TOYOTA
TACOMA
ALL TRIM LEVELS
—
2019-2021
TOYOTA
TUNDRA
ALL TRIM LEVELS
—
Pac Audio AP4-TY13 (R.2) Manual