At this present time our store location is open by appointment only.

1800W x 1 @ 1Ω

Amplifiers with a Power Output Rating of 1800-Watts x 1-Channel, 1-Ohm Final Impedance

Amplifiers with a Power Output Rating of 1800-Watts x 1-Channel, 1-Ohm Final Impedance

RMS power: This rating of any amplifier is the continuous power rating that an amp is designed to output at a maximum continued volume rating. The RMS power specification is one of two numbers to go by when pairing your speakers with an amplifier, not the only 2 but a good starting point. As an example, a speaker driver with a 1800-Watt, or 1800W for short, RMS rating should be paired with a eighteen-hundred-watt RMS amplifier. We usually recommend an amp to be over powered by 10% RMS so that the power-plant does not have to work at 100% capacity to get 100-percent efficiency from your speakers. This will keep your amplifier from overheating during long periods of continuous operation.

Ohms: Is the resistance rating of an amp and is the second most important when pairing drivers with amplifiers. A power-plant that is 1800W @ 1-ohm might only put out 900-Watts @ 2Ω. When purchasing an amplifier, the correct pairing of a speaker’s RMS wattage and Ohm ratings with an amp’s output power rating is absolutely essential.

1 product

  • Kicker 46CXA18001t : Mono Amplifier, 1800-Watts at 2-Ohm, 900-Watts at 4-Ohm Mono 1800W Amplifier @ 2Ω, or 900W @ 4Ω : Kicker 46CXA18001t top side.

    Kicker 46CXA18001t : Mono 1800W Amplifier @ 2Ω, or 900W @ 4Ω

    Pre-Order Today!

    Mono Amplifier, 1800-Watts at 2-Ohm, 900-Watts at 4-Ohm This CX-Series 1-channel amplifier by Kicker has an optimized circuit layout and the highest-grade internal components. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash. Efficient Class-D amplifier Three-second turn-on/off delay to eliminate unwanted interference Variable 12dB crossovers provides control to dial in perfect sound KickEQ™ 6dB variable bass boost for those additional low frequencies 24dB subsonic filter for protection from potentially damaging frequencies FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio Accepts up to 40-volt input signal Small footprint for easier installation Vertical mounting hardware included for another unique look This Kicker 46CXA18001t amplifier delivers as much as 1,800W into one bass channel. Specifications MODEL CXA1800.1 Power (watts/ch) 4 Ohm 900x1 Power (watts/ch) 2 Ohm 1800x1 Power (watts/ch) 1 Ohm 1800x1 +/-10% CXRC Remote Bass Capable (sold sep.) yes Dimensions (in, cm) (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L)14-3/8, 36.4 Frequency Response (Hz) 25-200Hz Input Sensitivity 250mV-10V (Low Level)1V-40V (High Level) Signal-to-Noise Ratio 95dB Active Crossover Variable Lo-pass 50Hz–200Hz, 12dB/octave Subsonic Filter 25Hz @24dB/octave KickEQ™ Boost Variable 0-6dB @40Hz Kicker CXA Mono Amplifier Manual

    Pre-Order Today!



Forgot your password?

Don't have an account yet?
Create account