Factory Reverse Camera Wiring-Harness Adapter for Select 2008-2017 Cadillac, Chevy and GMC Vehicles
The AXBUCH-GM2 is designed to retain factory back up cameras to be viewed through the aftermarket radio.
Retains the factory backup camera to an aftermarket radio
Note: For use in 44-way connector vehicles that have OEM installed backup camera.
Applications
CADILLAC
CTS
2008-2014
CTS-V
2008-2014
Escalade
2012-2014
Escalade ESV
2012-2014
Escalade EXT
2012-2014
CHEVEROLET
Avalanche
2012-2013
Camaro
2010-2015
Equinox
2010-2017
Malibu
2013-2015
Silverado 2500 HD, 3500 HD, Chassis Cab
2014
Silverado
2012-2013
Suburban
2012-2014
Tahoe
2012-2014
GMC
Sierra 2500 HD, 3500 HD, Chassis Cab
2014
Sierra
2012-2013
Terrain
2010-2017
Yukon, Yukon XL
2012-2014
Yukon Denali, Yukon XL Denali
2012-2014
Axxess AXBUCH-GM2 Installation Manual
Factory Reverse Camera Wiring-Harness Adapter for Select 2014-2020 Buick, Chevy and GMC Vehicles
The AXBUCH-GM3 is designed to retain factory back up cameras to be viewed through the aftermarket radio.
Retains the factory backup camera to an aftermarket radio
Applications
BUICK
Encore
2017-2020
Envision
2016-2020
LaCrosse
2014-2019
Regal
2014-2017
CHEVROLET
Camaro
2016-2018
Cheyenne
2014-2015
Colorado
2015-2018
Corvette
2014-2019
Cruze
2016-2018
Equinox
2018-2018
Impala
2014-2019
Malibu
2016-2018
Silverado
(Non- IO3 RPO)
2014-2018
Silverado 1500 LD
2019
Suburban
2015-2020
Tahoe
2015-2020
GMC
Canyon
2015-2018
Sierra 1500
2014-2018
Sierra 1500 Limited
2019
Sierra 2500 / 3500
2015-2015
Non-Amplified Head-Unit Replacement Wiring Harness for Select 2014-2020 Chevy and GMC Vehicles
The AXDI data interface provides everything you will need to retain certain features of your vehicle that are normally lost when replacing your factory radio, such as blind spot detection or chime retention if your vehicle is equipped. The AXDI interface also comes pre-wired with the harnessing needed to retain steering wheel controls if your vehicle is equipped. Note: If your vehicle is equipped with steering wheel controls and you wish to retain that feature, the required steering wheel control interface, the AXSWC, will need to be purchased separately. Don't forget to check our Vehicle Fit Guide to see if the AXDI is available for your vehicle as this product is dependent on the vehicle application.
Provides accessory power(12-volt 10-amp)
Retains R.A.P. (retained accessory power)
Used in non-amplified systems
Retains chimes
Provides NAV outputs (mute / parking brake / reverse / speed sense)
Retains OnStar / OE Bluetooth
Adjustable volume for chimes and OnStar
Retains OE AUX input
Retains the factory backup camera (IOA radio)
High level speaker input
Retains balance and fade
USB updatable
Pre-wired ASWC-1 harness (ASWC-1 sold separately)
Non-Amplified Applications
CHEVROLET
Colorado
w/ 8-inch radio, RPO code: IO5/IO6
2015-2018
Equinox
w/ 8-inch radio, RPO code: IO5/IO6
2018-2018
Malibu
w/ am/fm radio, RPO code: IP1
2016-2018
Silverado 1500
w/ 4.2" Base radio, RPO code: IO3
2014-2014
Silverado 1500
w/ 8" radio, RPO code: IO5 or I06
2014-2014
Silverado 1500 LD, 2500 HD, 3500 HD
w/ 8" radio, RPO code: IO5 or I06
2019-2019
Silverado 1500, 2500 HD, 3500 HD
w/ 8" radio, RPO code: IO5 or I06
2015-2018
Silverado 1500, 2500 HD, 3500 HD
w/ 4.2" Base radio, RPO code: IO3
2015-2018
Suburban
2015-2020
Tahoe
2015-2020
Trax
RPO code: IP1
2017-2020
GMC
Canyon
w/ 8-inch radio, RPO code: IO5/IO6
2015-2018
Sierra 1500
w/ 8" radio, RPO code: IO5 or I06
2014-2014
Sierra 1500
w/ 4.2" Base radio, RPO code: IO3
2014-2014
Sierra 1500, 2500 HD, 3500 HD
w/ 8" radio, RPO code: IO5 or I06
2015-2018
Sierra 1500, 2500 HD, 3500 HD
w/ 4.2" Base radio, RPO code: IO3
2015-2017
Yukon, Yukon XL
2015-2020
Axxess Interface AXDI-GMLN9 Manual
Amplifier Add-On OEM Line-Converter T-Harness for Select 2014-2020 Buick, Chevrolet and GMC Vehicles
For use with the Axxess AXDSP-L line converter.
Applications
BUICK
Enclave
IO5 IO6
2018-2019
CHEVROLET
Colorado
IO5 IO6
2015-2019
Cruze
IO5 or IO6
2016-2018
Equinox
IO5 or IO6
2018-2018
Malibu
IP1
2016-2018
Silverado
IO3, IO5 or IO6
2014-2018
Silverado (LD)
IO5 or IO6
2019-2019
Suburban
2015-2020
Suburban
2015-2020
Tahoe
2015-2020
GMC
Canyon
IO5 or IO6
2015-2018
Sierra
IO3, IO5 or IO6
2014-2018
Sierra Limited
IO5 or IO6
2019-2019
Terrain
IO5 or IO6
2018-2018
Yukon
2015-2020
Axxess AXDSPH-GL9 ManualAxxess AXDSPL-GL9 Manual
Amplifier Add-On OEM Line-Converter T-Harness for Select 2019-UP Chevy and GMC Vehicles
For use with the Axxess AXDSP-L line converter.
Applications
CHEVEROLET
Blazer
IOT or IOU
2019-2023
Camaro
IOS or IOT
2019-2023
Cheyenne
IOS or IOT
2019-2021
Colorado (New Style)
IOS or IOT
2019-2022
Equinox
IOS or IOT
2019-2023
Malibu
IOU or IOS
2019-2022
Silverado
IOS or IOT (Non-Bose Shop Confirmed)For Bose Systems use AXDSPX-ETH1
2019-2021
Traverse
IOS or IOT
2020-2022
GMC
Acadia
IOU
2020-2022
Canyon
IOS or IOT
2019-2022
Sierra
2019-2021
Terrain
IOS, IOT or IOU
2019-2022
Axxess AXDSPH-GM30 ManualAxxess AXDSPL-GM30 Manual
Add-On Amplifier OEM Integration Line Converter with DSP for Select 2006-2020 Buick, Cadillac, Chevrolet, GMC, Hummer and Saturn Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for non-amplified models
Package includes the AXDSP-L and vehicle-specific T-harness
Selectable 15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization for front, rear and sub
Selectable crossover slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10ms
Easy behind the radio installation with pre-wired harness
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included for level control of subwoofer amp
Settings adjusted via Bluetooth® in a smart device application (tablet or mobile phone) compatible with both Android and Apple devices
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Applications
BUICK
Enclave
2008-2017
Lucerne
2006-2011
CADILLAC
DTS
2006-2011
Escalade
2007-2011
SRX
2007-2009
CHEVROLET
Avalanche
2007-2011
Avalanche
Non-NAV
2012-2013
Captiva Sport
2012-2015
Equinox
2007-2009
Express
(-UYS)
2008-2015
Express
2016-2020
Impala
2006-2013
Impala Limited
2014-2016
Monte Carlo
2006-2007
Silverado
2007-2011
Silverado
Non-Nav
2012-2013
Silverado 2500 / 3500
Non-NAV
2014-2014
Suburban
2007-2011
Suburban
Non-NAV
2012-2014
Tahoe
2007-2011
Tahoe
Non-NAV
2012-2014
Traverse
2009-2016
GMC
Acadia
2007-2016
Acadia Limited
2017-2017
Savana
(-UYS)
2008-2015
Savana
2016-2020
Sierra
2007-2011
Sierra
Non-Nav
2012-2013
Sierra 2500 / 3500
Non-Nav
2014-2014
Yukon / XL
2007-2011
Yukon / XL
Non-NAV
2012-2014
HUMMER
H2
2008-2009
SATURN
Outlook
2007-2010
Vue
2008-2010
Axxess AXDSPL-GL1 Manual
Add-On Amplifier OEM Integration Line Converter with DSP for Select 2014-2020 Buick, Chevrolet and GMC Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for non-amplified models only
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains OE voice prompts (OnStar®)
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Applications
BUICK
Enclave
IO5 IO6
2018-2019
CHEVROLET
Colorado
IO5 IO6
2015-2019
Cruze
IO5 or IO6
2016-2018
Equinox
IO5 or IO6
2018-2018
Malibu
IP1
2016-2018
Silverado
IO3, IO5 or IO6
2014-2018
Silverado (LD)
IO5 or IO6
2019-2019
Suburban
2015-2020
Suburban
2015-2020
Tahoe
2015-2020
GMC
Canyon
IO5 or IO6
2015-2018
Sierra
IO3, IO5 or IO6
2014-2018
Sierra Limited
IO5 or IO6
2019-2019
Terrain
IO5 or IO6
2018-2018
Yukon
2015-2020
Axxess AXDSPL-GL9 Manual
Add-On Amplifier OEM Integration Line Converter with DSP and Factory-Amplifier Bypass-Harness for Select 2019-UP Factory Amplified and Non-Amplified GM Vehicles
The AXDSP-X offers installers a fast, cost-effective solution for improving the sound system with 10 individually assigned output channels, the ability to password-protect your settings, and an easy-to-use smartphone app. It has an onboard digital amplifier turn-on capability with built-in technology to retain many of the vehicle features commonly lost when installing a DSP.
Complete Tuning ControlInstallers will have full control to fine-tune each of the 10 channel outputs individually, controlled wirelessly via a free app available for smartphones and tablets. The app makes tuning easy with a 31-band graphic EQ and up to 10ms time delay for each channel, with independent high pass, low pass, and bandpass filters.
Retain Features with a Built-in InterfaceUtilizing Axxess’s data interface technology, the AXDSP-X goes beyond what a traditional DSP can do and retains many of the features commonly lost when upgrading a sound system. Voice prompts, parking sensor chimes, and other factory chimes are retained with an adjustable volume control that many traditional DSPs cannot offer. This is a cost-effective solution for customers who want to retain their factory radio and improve their vehicle sound quality, while still retaining systems like SYNC or OnStar®.
One Solution, Many ApplicationsThe AXDSP-X solution already works with a wide range of vehicle applications and systems, including OE or aftermarket radios, and fixed-level analog and/or digitally controlled amplified systems, in addition to non-amplified vehicles that do not have chimes. The AXDSP-X works with all the existing DSP T-harnesses and still offers the same easy installation behind the radio.
See the AXDSP-X application chart for up-to-date vehicle-specific information.
Designed for Ethernet amplifiers
Ethernet data interface included
AXDSP-X included
Includes an amp bypass harness
Retains factory chimes, including parking sensor chimes
Retains OnStar voice prompts
All chimes/voice prompts go through the aftermarket amp
Adjustable chime level
Micro “B” USB updatable
Applications
CADILLAC
XT4
Bose
2019-2023
CHEVROLET
Blazer
IOT or IOU & Bose
2019-2023
Camaro
IOS or IOT & Bose
2019-2023
Cheyenne
IOS or IOT & Bose
2019-2021
Colorado (New Style)
IOS or IOT & Bose
2019-2022
Corvette
2020-2023
Equinox
IOS or IOT & Bose
2019-2023
Malibu
IOU or IOS & Bose
2019-2022
Silverado
Bose
2022-2024
Silverado
IOS or IOT & Bose
2019-2021
Suburban
Bose
2021-2023
Tahoe
Bose
2021-2024
Traverse
IOS or IOT & Bose
2020-2022
GMC
Acadia
IOU & Bose
2020-2022
Acadia
IOU & Bose
2019-2019
Canyon
IOS or IOT & Bose
2019-2022
Sierra
Bose
2019-2024
Terrain
IOS, IOT or IOU & Bose
2019-2022
Yukon
Bose
2021-2024
Axxess AXDSPX-ETH1 Installation Manual
Add-On Amplifier OEM Integration Interface for Select 2019-UP Chevy and GMC Non-Amplified Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Note: A single pole double throw (SPDT) relay is recommended when installing multiple amplifiers.
Contents
AXLOC-GM31 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
CHEVEROLET
Camaro
IOR
2019-2023
Cheyenne
IOR
2019-2021
Colorado
IOR
2019-2022
Cruze
IOR
2019-2019
Equinox
IOR
2019-2022
Malibu
IOR
2019-2022
Silverado
IOR
2019-2022
Sonic
IOR
2019-2020
Spark
IOR
2019-2022
GMC
ACADIA
IOR
2020-Up*
Canyon
IOR
2019-Up*
Sierra
IOR
2019-Up*
SIERRA HD
IOR
2020-Up*
Terrain
IOR
2019-Up*
Axxess AXLOC-GM31 Manual
Add-On Amplifier OEM Integration Interface for Select 2010-2017 Chevy and GMC Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-GM44 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
CHEVEROLET
Avalanche
with NAV
2012-2013
Camaro
non-amplified
2010-2015
Cruze
non-amplified
2011-2015
Equinox
non-amplified
2010-2017
Express
non-amplified
2013-2015
Malibu
non-amplified
2013-2015
Sonic
non-amplified
2012-2014
Spark
non-amplified
2013-2015
Suburban
IOR
2012-2014
Tahoe
non-amplified
2012-2014
Trax
non-amplified
2015-2016
GMC
Savanna
non-amplified
2013-2015
Terrain
non-amplified
2010-2017
Yukon/XL
With Nav without amp
2012-2014
Axxess AXLOC-GM44 Manual
Add-On Amplifier OEM Integration Interface for Select 2006-2012 Chevy, Pontiac and Saturn Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-GMLN1 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
CHEVY
Cobalt
non-amplified
2007-2010
HHR
non-amplified
2006-2011
Malibu
non-amplified
2008-2012
PONTIAC
G5
non-amplified
2007-2009
G6
non-amplified
2009-2012
Solstice
non-amplified
2006-2009
SATURN
Aura
non-amplified
2007-2009
Sky
non-amplified
2007-2009
Axxess AXLOC-GMLN1 Manual
Add-On Amplifier OEM Integration Interface for Select 2016-2020 Non-Amplified Chevy and GMC Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-GM10 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
CHEVEROLET
Camaro ‡
2016-2018
Colorado ‡
2016-2018
Cruze †
2016-2018
Equinox ‡
2018-2018
Malibu †
2016-2018
Silverado 1500 LD ‡
2019-2019
Silverado 1500 ‡
2016-2018
Silverado 2500 HD/3500 HD ‡
2016-2019
Trax †
2017-2020
GMC
Acadia ‡
2017-2019
Canyon ‡
2017-2018
Sierra 1500 ‡
2016-2018
Sierra Limited ‡
2019-2019
Sierra 2500 HD/3500 HD ‡
2016-2019
† RPO IOA‡ RPO IOB
Axxess AXLOC-GMLN10 Manual
Overhead Monitor Video Retention Wiring-Harness Adapter for Select 2012-2014 Cadillac, Chevy and GMC Vehicles
Retains the A/V-IN jack (if applicable)
Provides A/V output to the factory installed rear seat overhead entertainment system (1)
Designed for models that have a DVD player built into the factory radio
(1) Only applicable for models with a second row RSE
Applications
CADILLAC
Escalade
2012-2014
Escalade ESV
2012-2014
Escalade EXT
2012-2014
CHEVY
Avalanche
2012-2013
Silverado 2500 HD, 3500 HD, Chassis Cab
2014
Silverado
2012-2013
Suburban
2012-2014
Tahoe
2012-2014
GMC
Sierra 2500 HD, 3500 HD, Chassis Cab
2014
Sierra
2012-2013
Yukon, Yukon XL
2012-2014
Yukon Denali, Yukon XL Denali
2012-2014
Axxess AXRSEH-G2 Installation Manual
Add-On Amplifier OEM Integration Interface for Select 2021-UP Buick, Chevy and GMC Vehicles
This add-a-sub interface is installed at the radio location and features a 2-channel non-fading 5V RMS output, a fixed low pass frequency of 234Hz, and 250mA remote turn-on output. It includes a bass knob & vehicle-specific harness for easy installation and customization.
Interface Features:
2 Channel non-fading 5V RMS output
Fixed low pass frequency of 234Hz
250mA remote turn-on output
Designed for non-amplified vehicles
Bass knob & vehicle-specific harness included
Install done at radio location
Micro USB updateable
Applications
BUICK
Envision
IOS or IOU
2022-2023
CHEVROLET
Cheyenne 1500
IOK non-amplified
2022-2024
Colorado (New Style)
Non-amplified
2023-2024
Silverado 1500
IOK non-amplified
2022-2024
Silverado 2500/3500
IOK non-amplified
2024-2024
Suburban
IOK non-amplified
2021-2024
Tahoe
Non-amplified
2021-2024
GMC
Canyon
non-amplified
2023-2024
Sierra 1500
IOK non-amplified
2023-2024
Sierra 2500/3500
IOK non-amplified
2024-2024
Yukon
Non-amplified
2021-2024
Axxess AXSUB-GM5 Installation Manual
Aftermarket Stereo-Replacement Wiring-Harness for Select Non-Amplified 2019-2022 Chevy and GMC Vehicles
Provides retained accessory power (10-amp)
Provides illumination, parking brake, reverse, and speed sense outputs
Retains warning chimes through an onboard speaker
Retains audio controls on the steering wheel
Designed to be compatible with all major radio brands
Auto detects vehicle type, radio connection, and preset controls
Ability to dual assign steering wheel control buttons
Retains memory settings even after battery disconnection or interface removal (nonvolatile memory)
Designed for non-amplified models, or when bypassing a factory amplifier
Retains balance and fade
Micro-B USB updatable
Non-Amplified Applications
CHEVY
Blazer
RPO code: IOU/IOT
2019-2020
Camaro
w/8-inch radioRPO code: IOS/IOT
2019-2020
Colorado
RPO code: IOS/IOT
2019-2022
Equinox
RPO code: IOS/IOT
2019-2022
Malibu
w/ 8-inch radioRPO code: IOS/IOU
2019-2020
Silverado 1500, 2500 HD, 3500 HD
IOS, IOT radioexcluding "WT" trim
2019-2021
Volt
2019
GMC
Acadia
RPO code: IOU
2019-2020
Canyon
RPO code: IOU
2019-2022
Sierra 1500
RPO code: IOS/IOT
2019
Terrain
RPO code: IOS/IOT
2019-2020
Axxess AXTC-LN30 Installation Manual
Aftermarket Stereo-Replacement Wiring-Harness for Select Non-Amplified 2019-UP Chevy and GMC Vehicles
Provides retained accessory power (10-amp)
Provides illumination, parking brake, reverse, and speed sense outputs
Retains warning chimes through an onboard speaker
Retains the factory backup camera (Excluding Camaro (IOR) 2019-Up)
Retains audio controls on the steering wheel
Designed to be compatible with all major radio brands
Auto detects vehicle type, radio connection, and preset controls
Ability to dual assign steering wheel control buttons
Retains memory settings even after battery disconnection or interface removal (nonvolatile memory)
Designed for non-amplified models, or when bypassing a factory amplifier
Retains balance and fade
Micro-B USB updatable
Non-Amplified Applications
CHEVEROLET
Camaro
w/7-inch radioRPO code: IOR
2019-2020
Colorado
RPO code: IOR
2019-2022
Cruze, Cruze Hatchback
2019-2019
Equinox
RPO code: IOR
2019-2022
Malibu
w/ 8-inch radio radioRPO code: IOR
2019-2020
Silverado 1500, 2500 HD, 3500 HD
IOR 8" Radio
2022
Silverado 1500, 2500 HD, 3500 HD
IOR radioexcluding "WT" trim
2019-2021
Sonic
2019-2020
Spark
RPO code: IOR
2019-2020
Trax
2021-2022
Trax
RPO code: IOR
2017-2020
GMC
Canyon
RPO code: IOR
2019-2022
Sierra 1500 LTD, 2500 HD, 3500 HD
RPO: IOR
2022-2022
Sierra 1500, 2500 HD, 3500 HD
RPO: IOR
2020-2021
Terrain
RPO code: IOR
2019-2020
Axxess AXTC-LN31 Installation Manual
