Factory Backup-Camera Retention for Select 2013-UP Scion and Toyota Vehicles
Retains the factory backup camera to an aftermarket radio
Allows an aftermarket camera to be added to the factory screen (display and navigation model radios only)
Includes the AXCSD-6V 12-volt to 6-volt converter
Applications
SCION
FRS
2016
iM
2016
tC
2016
TOYOTA
86
2017-2018
4Runner
2014-2019
4Runner (Non-NAV)
2012-2013
Avalon
2015-2018
Camry
2014-2016
Corolla
2014-2019
Corolla iM
2017-2018
Highlander
2014-2019
Prius (One, Two, Three & Touring)
2018-Up*
Prius
2016-Up*
Prius C
2015-Up*
Prius Prime (Plus)
2017-Up*
Prius V
2015-2018
Rav4 (After NOV 13')
2014-2018
Sequoia
2014-2019
Sienna
2015-2017
Tacoma
2014-2019
Tundra
2014-2019
Venza
2015
Yaris
2018-Up*
Axxess Interface AXBUCH-T36V Manual
Head-Unit Replacement USB Adapter-Cable for Select 2012-UP Honda, Scion, Subaru and Toyota Vehicles
Connects the factory USB port and cable to a full-size USB male connector in select Toyota vehicles.
Click Here to View Vehicle Coverage
Coverage Confirmed through 2019
Head-Unit Replacement Accessory and USB-Retention Cable for Select 2012-UP Honda, Scion, Subaru and Toyota Vehicles
Converts the factory USB port cable into standard full size male USB so it can be plugged into an aftermarket radio.
Click Here to View Vehicle Coverage Information
Compatibility confirmed through 2021
Aftermarket Head-Unit Replacement Maestro-Module T-harness for Select 2013-UP Subaru, Scion and Toyota Vehicles
Radio replacement T-harness for select Subaru, Scion, Toyota vehicles 2013-2019. Greatly simplifies the installation of the Maestro RR module sold separately.
Click Here to View Vehicle Coverage Information - confirmed through 2021
Head-Unit Replacement T-harness for Select 2004-2018 Toyota and Scion Vehicles
Greatly simplifies the installation of the Maestro RR module sold separately.
Click Here to View Vehicle Coverage Information
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Single 10-Inch 600-Watt Subwoofer-Enclosure for Select 2013-Up Subaru BRZ, 2013-2016 Scion FR-S, and 2016-UP Toyota 86 Vehicles
Somebody finally paid attention and designed a no-nonsense, back-to-basics sports car that puts the emphasis on driving enjoyment. Now all you need to do is add a healthy dose of JL Audio to ratchet up the listening enjoyment and make every drive even more memorable.
JL's patented 10TW3 thin-line driver is the engine inside this Stealthbox® system, and it produces spectacular results from its perch in the passenger side rear corner of the trunk. Your trunk remains completely useful and your installation is neat and secure. A grille is also included to protect your investment.
The Hard Data: Contains one 10TW3-D4 subwoofer in a sealed enclosure. 400 watt power handling. Wired for 2 ohm mono. Installs in the passenger side of trunk compartment. Black steel mesh woofer grille is included.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
JL Audio SB-S-BRZFRS/10TW3 Installation Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Single 10-Inch 500-Watt Subwoofer-Enclosure for Select 2011-2016 Scion-tC Vehicles
Scion's sporty hatchback delivers astonishing refinement and value, and a very healthy amount of useful cargo space.
The good news is that achieving superior sub-bass in your Scion does not require that you sacrifice a single one of the conveniences you drove off the lot with, including that cavernous hatch.
A JL Audio custom-engineered, sealed Stealthbox® for the tC mounts securely on the passenger side of the hatch to achieve impressive output and fidelity with its 10-inch JL Audio subwoofer driver. Usable trunk space is barely affected and a steel mesh grille is included to protect the driver from all the stuff that still fits in your hatch.
The Hard Data: Contains one 10W3v3-2 subwoofer in a sealed enclosure. 500 watt power handling. Wired for 2 ohm mono. Black steel mesh woofer grille is included. Installs on passenger-side rear wheel well.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
JL Audio SB-SC-TCG2/10W3v3 Installation Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Single 12-Inch 500-Watt Subwoofer-Enclosure for Select 2007-2015 Scion-xB Vehicles
The xB is a vehicle for those who value form, function and individual style. Unfortunately, the factory and dealer-installed audio systems are less than exciting in the bass department (unless you like weak, distorted bass).
If you prefer powerful, tight and accurate bass, JL now has the perfect solution in the form of a 12-inch W3v3 subwoofer driver in a sealed, fiberglass enclosure that nestles seamlessly into the passenger side cargo area, retaining your usable cargo space and full-access to the spare tire. So, get rid of that fuzzy woofer box that keeps getting in your way, and treat yourself to some serious bass performance.
The Hard Data: Contains one 12W3v3-2 subwoofer in a sealed enclosure. 500 watt power handling. Wired for 2 ohm mono. Stealthbox® includes a black, steel-mesh grille to protect the driver. Accessory cargo cover will not fit with Stealthbox® installed.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
JL Audio SB-SC-XB/12W3v3 Installation Manual
Non-Amplified Head-Unit Replacement Wiring-Harness for Select 1987-Up Toyota, Scion and Subaru Vehicles
Install a new car radio faster with this wiring harness that plugs right into the vehicle's connectors, allowing you to hook up the radio into the vehicle's electrical system. On one side, the wiring harness is color-coded with wires that you'll connect or solder into the aftermarket radio/receiver. The other side has a vehicle-specific adapter that connects directly into the original radio connectors for a quicker installation without having to cut each of the wires.
Keep in mind that you may need additional parts to complete your installation, including a dash kit, antenna adapter, and, depending on your vehicle, a special interface adapter to retain audio controls on your steering wheel or other important vehicle functions like navigation, video, and more. Look up your vehicle for more information.
Wiring harness for fast and easy radio installation
Plugs into the car's original radio connectors on one side
Color-coded wires on the other side are connected to the aftermarket radio
No wire cutting needed for factory radio connectors
Applications
Geo
Prizm
1989-1992
Lexus
ES250
1990-1991
LS 400
1990-1992
Scion
FRS
2013-2016
iM
2016
iQ
2012-2015
tC
2005-2015
xA
2004-2006
xB
2004-2015
xD
2008-2014
Subaru
BRZ
2015-2022
Crosstrek
2016-2023
Forester
2009-2018
Impreza
2012-2023
Impreza WRX
2013-2014
Legacy
2012-2019
Outback
2012-2019
WRX, WRX STI
2016-2021
XV Crosstrek
2013-2015
Toyota
4Runner
1987-2019
86
2017-2020
Avalon
1995-2018
C-HR
2018
Camry
1987-2017
Camry Solara
1999-2008
Celica
1987-2005
Corolla
1987-2019
Corolla iM
2017-2018
Echo
2000-2005
FJ Cruiser
2007-2014
Highlander
2001-2019
Land Cruiser
1988-1994
Matrix
2005-2014
MR2 Spyder
2000-2003
MR2
1987-1995
Paseo
1992-1997
Pickup
1987-1995
Previa
1991-1997
Prius
2004-2019
Prius C
2012-2019
Prius Prime
2017-2020
Prius V
2012-2017
RAV4 (non-EV)
2013-2018
RAV4
1996-2012
Sequoia
2001-2019
Sienna
1996-2017
Solara
1999-2008
Supra
1986.5-1992
T-100
1993-1998
Tacoma
1995-2019
Tercel
1987-1998
Tundra
2000-2019
Van
1987-1990
Venza
2009-2015
Yaris
2007-2018
Double-DIN Size Stereo-Replacement Dash-Kit for Select 2000-2017 Toyota, Subaru and Scion Vehicles
This stereo installation kit is engineered to help you install an aftermarket 4” tall (Double-DIN) radio into the original vehicle dashboard. This dash kit helps make radio replacement simple and is designed to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 4” tall aftermarket radio
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
A tech support number is available for installation help 7 days a week
Applications
Toyota
Rav-4 - 2001-2005
MR2 Spyder - 2000-2005
Celica - 2000-2005
Echo - 2000-2005
Highlander (without factory navigation) - 2001-2007
Matrix - 2005-2008
Matrix (with factory navigation) - 2009-2010
4Runner (excluding limited) - 2003-2009
Tundra - 2003-2006
Sequoia - 2003-2007
FJ Cruiser - 2007-2014
Yaris (without power package) - 2007-2011
Yaris - 2012-2017
Scion
FR-S - 2013-2016
iQ - 2012-2015
tC - 2005-2016
xA - 2004-2006
xB - 2004-2015
xD - 2008-2014
Subaru
BRZ - 2013-2015
Forester (with SD based navigation) - 2009-2013
DIN or DDIN-Size Head-Unit Replacement Dash-Kit for Select 2000-2016 Toyota, Scion, Subaru and Pontiac Vehicles
This stereo installation kit has been engineered to help you install either a 2” tall (Single-DIN) or a 4” tall (Double-DIN) aftermarket radio into the original vehicle dashboard. This dash kit makes radio replacement simple and comes with a pocket that is installed below the 2” radio to fill the extra space in the radio opening, which can be used for storage. The pocket is not needed when installing a 4” tall radio. The dash kit is designed to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 2” or 4” tall aftermarket radio
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
Applications
Pontiac
Vibe - 2003-2008
Scion
FR-S - 2013-2016
iQ - 2012-2015
tC - 2005-2016
xA - 2004-2006
xB - 2004-2015
xD - 2008-2014
Subaru
BRZ - 2013-2015
Toyota
4Runner (excluding Limited) - 2003-2009
86 - 2017-2020
Celica - 2000-2005
Corolla (w/NAV) - 2009-2013
Echo - 2000-2005
FJ Cruiser - 2007-2014
Highlander - 2001-2007
Highlander - 2013
Matrix - 2003-2008
MR2 Spyder - 2000-2005
RAV-4 - 2001-2005
Sequoia - 2003-2007
Tundra - 2003-2006
Yaris - 2012-2017
Yaris (3-door) - 2007-2010
Yaris (4-door) - 2007-2010
Factory Backup-Camera to Aftermarket Head-Unit Wiring Harness for Select 2012-2015 Toyota, Scion and Subaru Vehicles
The CAM-TY11 is a reverse camera T-harness that gives the ability to add a reverse camera input for Toyota and select Scion and Subaru 6.1” touchscreen radios. The harness is Plug-and-Play with no need to connect to reverse lamps for the reverse trigger.
Applications
Toyota
4Runner - 2012-2014
Avalon - 2012-2014
Camry - 2012-2014
Highlander - 2012-2014
Prius 3, Prius C, Prius V - 2012-2014
Rav-4 - 2012-2014
Venza - 2012-2014
Scion
FR-S - 2013-2014
xB - 2013
Subaru
BRZ - 2013-2014
