Dual 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2007-2018 Toyota-Tundra Double-Cab Trucks
Accu-Tuned 10” Dual sealed subwoofer enclosure designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers.
OEM-Fit is designed and engineered specifically for the 2007-2018 Double cab trucks to ensure an OEM fit without impeding the operation of the back seat.
High-Grade MDF for Ultimate structural rigidity and no-flex construction.
.83 Cubic Feet Net Volume internal air space (per sub) is ideal for tight accurate bass reproduction.
Subwoofer Mounting Depth is 4.375” which is ideal for lower profile subwoofers.
Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly.
Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber.
Premium OEM Grade Carpeting for factory look and durability.
Dimensions Sub Cut Out: 9.125”, Mounting Depth: 4.375”, Width: 50.25” Height: 7.875”, Depth: 22.375”
Specifications
Configuration: Dual Sealed
Finish: Charcoal Carpeted
Width:50.25"
Height:5.13"
Depth:22.38"
Max Mounting Depth:4.50"
Gross VolumePer Sub:4.23
Net Volume Per Sub:3.07
Dual 12-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2007-2018 Toyota-Tundra Double-Cab Trucks
Accu-Tuned 12” Dual sealed subwoofer enclosure designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers.
OEM-Fit is designed and engineered specifically for the 2007-2018 Double cab trucks to ensure an OEM fit without impeding the operation of the back seat.
High-Grade MDF for Ultimate structural rigidity and no-flex construction.
.83 Cubic Feet Net Volume internal air space (per sub) is ideal for tight accurate bass reproduction.
Subwoofer Mounting Depth is 4.375” which is ideal for lower profile subwoofers.
Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly.
Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber.
Premium OEM Grade Carpeting for factory look and durability.
Dimensions Sub Cut Out: 9.125”, Mounting Depth: 4.375”, Width: 50.25” Height: 7.875”, Depth: 22.375”
Specifications
Configuration: Dual Sealed
Finish: Charcoal Carpeted
Width:50.25"
Height:5.13"
Depth:22.38"
Max Mounting Depth:4.50"
Gross VolumePer Sub:4.23
Net Volume Per Sub:3.07
Single 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2010-2015 Toyota-Tacoma Access-Cab Pickups
CLICK HERE TO VIEW SUBWOOFERS THAT FIT THIS BOX!
Fits: 2010-2015 Toyota Tacoma Access Cab Trucks
Installs between rear center seats
Mounting Depth: 8.5"
Volume: .96 cu.ft
Installation Note: Removal of the rear armrest is required along with Temporary removal of the front console which helps during installation. Does not affect rear seating.
Single 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2005-2009 Toyota-Tacoma Access-Cab Pickups
CLICK HERE TO VIEW SUBWOOFERS THAT FIT THIS BOX
Fits: 2005-2009 Toyota Tacoma Access Cab Trucks
Installs on center hump behind front console and contours up over rear seats.
Mounting Depth: 9"
Volume: .82 cu.ft
Additional Note: This box fits directly behind the front console and extends over the rear bench for increased volume. As an added bonus, the top of the box serves as a great armrest for the rear passengers--or mount your amp on top if you like. The box fits perfectly in the space provided and is designed to lock itself into place, but can also be easily moved if needed. This box is a down fire box meaning the sub faces the floor. What this means is that your bass will reflect off the floor for an even greater bass response. There is 2" of clearance between the baffle and the hump, so no worries about your sub contacting the floor. This setup is not only a solid performer but is also very stealthy since the woofer cannot be seen.
Factory OEM Amplifier Bypass for Select 2006-2015 Toyota Vehicles
Allows the factory amplifier to be bypassed without altering the factory wiring
20 gauge wires
Length – 12 inches
Applications
TOYOTA
Land Cruiser
2008
2015
W/O NAV
Tundra
2006
2006
Axxess AXABH-TY3 Manual
Factory Backup-Camera Retention Wiring Harness for Select 2012-2015 Scion and Toyota Vehicles
Retains the factory backup camera to an aftermarket radio
Allows an aftermarket camera to be added to the factory screen (Display and navigation model radios only)
Includes the AXCSD-6V 12-volt to 6-volt converter
Backup Camera Retention Applications
SCION
FRS
2013-2015
iQ
2014-2015
tC
2014-2015
xB
2014-2015
xD
2014
TOYOTA
4-Runner (w/o Amp)
2012-2013
Avalon
2013-2014
Camry
2012-2013
Highlander
2013
Prius
2012-2015
Prius PHV
2012-2015
Prius V
2012-2014
Rav4 (Before NOV 13')
2013-2014
Sequoia
2013
Venza
2013-2014
Add Camera to Factory Radio Applications
TOYOTA
4-Runner (w/o AMP)
Without Amplifier
2012-2013
Avalon
2013-2014
Camry
2012-2013
Highlander
2013-2013
Prius
2012-2015
Prius PHV
2012-2015
Prius V
2012-2014
Rav4 (Before NOV 13')
Before November 13'
2013-2014
Sequoia
2014-2019
Tacoma (w/NAV)
w/ Navigation
2012-2013
Venza
2013-2014
Axxess Interface AXBUCH-T16V Manual
Factory Backup-Camera Retention for Select 2006-2013 Toyota Vehicles
Retains the factory backup camera to an aftermarket radio
Allows an aftermarket camera to be added to the OEM screen (Display and navigation model radios only)
6-volt camera turn-on included
Backup Camera Retention Applications
TOYOTA
4-Runner (w/Amp)
2012-2013
4-Runner
2006-2011
Avalon
2011-2012
Camry
2007-2011
Highlander
2008-2012
Prius
2010-2011
Sequoia (w/AMP)
2008-2012
Sequoia ( NAV)
2012-2012
Tundra (w/Factory Amp)
2007-2013
Venza (NAV)
2009-2012
Add Camera to Factory Radio Applications
TOYOTA
4-Runner (w/ AMP)
With Amplifier
2012-2013
4-Runner
2006-2011
Avalon
2011-2012
Camry
2007-2011
Highlander
2008-2012
Prius
2010-2011
Sequoia (w/AMP)
w/ Amplifier
2013-2013
Sequoia (w/NAV)
w/ Navigation
2008-2012
Tundra (w/AMP)
w/ Amplifier
2007-2019
Axxess Interface AXBUCH-T26V Manual
Factory Backup-Camera Retention for Select 2013-UP Scion and Toyota Vehicles
Retains the factory backup camera to an aftermarket radio
Allows an aftermarket camera to be added to the factory screen (display and navigation model radios only)
Includes the AXCSD-6V 12-volt to 6-volt converter
Backup Camera Retention Applications
SCION
FRS
2016
iM
2016
tC
2016
TOYOTA
86
2017-2018
4Runner
2014-2019
4Runner (Non-NAV)
2012-2013
Avalon
2015-2018
Camry
2014-2016
Corolla
2014-2019
Corolla iM
2017-2018
Highlander
2014-2019
Prius (One, Two, Three & Touring)
2018
Prius
2016-2017
Prius C
2015
Prius Prime (Plus)
2017-2019
Prius V
2015-2018
Rav4 (After NOV 13')
2014-2018
Sequoia
2014-2019
Sienna
2015-2017
Tacoma
2014-2019
Tundra
2014-2019
Venza
2015
Yaris
2018-2020
Add Camera to Factory Radio Applications
TOYOTA
86
2017-2018
4-Runner
2013-2019
4-Runner (Non-NAV)
Non-Navigation Model
2012-2013
Avalon
2015-2018
Camry
2014-2016
Corolla
2014-2019
Corolla iM
2017-2018
Highlander
2014-2019
Mirai
2016-2019
Prius (One, Two, Three & Touring)
2018-2018
Prius
2016-2019
Prius C
2015-2019
Prius Prime (Plus)
2017-2019
Prius V
2015-2018
Rav4 (After NOV 13')
After November 13'
2014-2018
Sequoia
2014-2019
Sienna
2015-2017
Tacoma
2014-2019
Tundra
2014-2019
Venza
2015-2016
Yaris
2018-2019
Axxess Interface AXBUCH-T36V Manual
Add-On Amplifier OEM Integration Line Converter with DSP and Factory-Amplifier Bypass-Harness for Select 2018-UP Factory Amplified and Non-Amplified Toyota Vehicles
Upgrade your sound system with this cost-effective, easy-to-install DSP package that includes a vehicle-specific T-harness.
Complete Tuning ControlInstallers will have full control to fine-tune each of the 10 channel outputs individually, controlled wirelessly via a free app available for smartphones and tablets. The app makes tuning easy with a 31-band graphic EQ and up to 10ms time delay for each channel, with independent high pass, low pass, and bandpass filters.
Retain Features with a Built-in InterfaceUtilizing Axxess’s data interface technology, the AXDSP-X goes beyond what a traditional DSP can do and retains many of the features commonly lost when upgrading a sound system. Voice prompts, parking sensor chimes, and other factory chimes are retained with an adjustable volume control that many traditional DSPs cannot offer. This is a cost-effective solution for customers who want to retain their factory radio and improve their vehicle sound quality, while still retaining systems like SYNC® or OnStar®.
One Solution, Many ApplicationsThe AXDSP-X solution already works with a wide range of vehicle applications and systems, including OE or aftermarket radios, and fixed-level analog and/or digitally controlled amplified systems, in addition to non-amplified vehicles that do not have chimes. The AXDSP-X works with all the existing DSP T-harnesses and still offers the same easy installation behind the radio.
Designed for amplified and non-amplified models
Package includes the AXDSP-X and vehicle-specific T-harness
31-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
6 inputs and 10 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Micro “B” USB updatable
1-year limited warranty
Applications
TOYOTA
4-Runner
2020-2020
Avalon
2020-2022
C-HR
2019-2021
Camry
2018-2023
Highlander
2020-2023
Mirai
2016-2019
RAV4
2019-2023
Sequoia
2020-2020
Tacoma
2020-2020
Axxess AXDSPX-TY3 Installation Manual
Add-On Amplifier OEM Integration Interface for Select 1980-2021 Scion, Subaru and Toyota Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-TY1 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
SCION
FRS
non-amplified
2013-2016
IQ
non-amplified
2012-2016
TC
non-amplified
2005-2016
XA
non-amplified
2004-2006
XB
non-amplified
2004-2015
XD
non-amplified
2008-2014
SUBARU
BRZ
non-amplified
2013-2020
CROSSTREK
non-amplified
2016-2020
FORESTER
non-amplified
2016-2020
IMPREZA
non-amplified
2015-2018
LEGACY
non-amplified
2015-2017
OUTBACK
non-amplified
2015-2017
WRX
non-amplified
2016-2021
TOYOTA
86
non-amplified
2017-2020
4-Runner
non-amplified
1987-2019
Avalon
non-amplified
1995-2018
C-HR
non-amplified
2018-2018
Camry
non-amplified
1987-2017
Celica
non-amplified
1989-2005
Corolla
non-amplified
1987-2019
Cressida
non-amplified
1987-1992
Echo
non-amplified
2000-2005
FJ Crusier
non-amplified
2007-2014
Highlander
non-amplified
2001-2019
Land Cruiser
non-amplified
1987-2002
Matrix
non-amplified
2005-2013
MR2
non-amplified
1985-1995
MR2 Spyder
non-amplified
2000-2006
Paseo
non-amplified
1992-1997
Pickup
non-amplified
1987-1995
Previa
non-amplified
1991-1997
Prius
non-amplified
2001-2019
Rav 4
non-amplified
1996-2018
Seqoia
non-amplified
2001-2019
Sienna
non-amplified
1996-2017
Solara
non-amplified
1999-2008
Supra
non-amplified
1986-1992
T100
non-amplified
1993-1998
Tacoma
non-amplified
1995-2019
Tercel
non-amplified
1980-1998
Tundra
non-amplified
2000-2019
Van
non-amplified
1987-1990
Venza
non-amplified
2009-2015
Yaris
non-amplified
2007-2017
Axxess AXLOC-TY1 Manual
Add-On Amplifier OEM Integration Interface for Select 2018-2023 Toyota Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-TY3 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
TOYOTA
4-Runner
non-amplified
2020-2023
Avalon
non-amplified
2019-2022
C-HR
non-amplified
2019-2022
Camry
non-amplified
2018-2023
Corolla
non-amplified
2019-2023
Highlander
non-amplified
2020-2023
Prius
non-amplified
2020-2023
Rav4
non-amplified
2019-2023
Sequoia
non-amplified
2020-2023
Sienna
non-amplified
2018-2023
Tacoma
non-amplified
2020-2023
Tundra
non-amplified
2020-2023
Axxess AXLOC-TY3 Manual
Overhead Monitor Video Retention Wiring-Harness Adapter for Select 2004-2014 Toyota Vehicles
The AXRSEH-T is designed to provide an A/V (audio/video) signal from the factory equipped overhead RSE (rear seat entertainment) system to the aftermarket radio
Retains RSE audio and video
The aftermarket radio must have an audio/video input
Applications
TOYOTA
4Runner
2005-2008
4Runner
2009-2013
Highlander
2008-2010
Sequoia
2005-2013
Sienna
2004-2014
Tundra
2006-2013
Axxess AXRSEH-T Installation Manual
Head-Unit Replacement USB Adapter-Cable for Select 2012-2019 Honda, Scion, Subaru and Toyota Vehicles
Connects the factory USB port and cable to a full-size USB male connector in select Toyota vehicles.
Click Here to View Vehicle Coverage
Head-Unit Replacement Accessory and USB-Retention Cable for Select 2012-2020 Honda, Scion, Subaru and Toyota Vehicles
Converts the factory USB port cable into standard full size male USB so it can be plugged into an aftermarket radio.
Click Here to View Vehicle Coverage Information
Head-Unit Replacement T-harness for Select 2012-UP Toyota Vehicles
RR and RR2 compatible radio replacement harness for select 2012-2021 Toyota vehicles. The radio side of the harness terminates in a universal connector that can be used in conjunction with available Maestro Head unit adapters for a plug n play solution or removed for conventional connections Please see vehicle fit guide for more information on this solution.
Click Here to View Vehicle Coverage Information
Applications - confirmed as of 2/24/2023
4Runner With JBL
2014-2019
4Runner Without JBL
2014-2019
86 All
2017-2020
Avalon With Factory Navigation With JBL
2013-2014
Avalon With JBL
2015-2018
Avalon Without JBL
2015-2018
C-HR Without Apple Carplay / Android Auto
2018
Camry 6.1" Factory Screen With JBL
2012-2014
Camry 6.1" Factory Screen Without JBL
2012-2014
Camry 7" Factory Navigation With JBL
2012-2014
Camry With JBL
2015-2017
Camry Without JBL
2012-2017
Corolla 6.1" Factory Screen
2014-2016
Corolla All
2017
Corolla Without CarPlay or Android Auto
2018-2019
Highlander With JBL
2014-2019
Highlander Without JBL
2014-2019
Prius C All
2012-2019
Prius V All With JBL
2012-2017
Prius V All Without JBL
2012-2017
Prius With Factory Navigation
2012-2015
Prius With Factory Navigation With JBL
2012-2015
Prius With JBL
2012-2019
Prius Without JBL
2016-2019
RAV4 6.1" Factory Screen With JBL
2013-2015
RAV4 6.1" Factory Screen Without JBL
2013-2015
RAV4 With JBL
2013-2018
RAV4 Without JBL
2013-2018
Sequoia With JBL
2014-2019
Sequoia Without JBL
2014-2019
Sienna With JBL
2015-2017
Sienna Without JBL
2015-2017
Tacoma With JBL
2016-2019
Tacoma Without JBL
2016-2019
Tundra / Without Amplifier
2014-2019
Tundra Amplified non JBL
2014-2019
Tundra With JBL
2014-2021
Venza With Factory Navigation With JBL
2013-2014
Venza With Factory Navigation Without JBL
2013-2014
Venza With JBL
2014-2016
Venza Without JBL
2014-2016
Aftermarket Head-Unit Replacement Maestro-Module T-harness for Select 2013-2021 Subaru, Scion and Toyota Vehicles
RR and RR2 compatible radio replacement harness for select 2012-2021 Subaru vehicles . The radio side of the harness terminates in a universal connector that can be used in conjunction with available Maestro Head unit adapters for a plug n play solution or removed for conventional connections separately.
Click Here to View Vehicle Coverage Information - confirmed through 2021
Aftermarket Head-Unit Replacement Maestro-Module T-harness for Select 2013-UP Subaru, Scion and Toyota Vehicles
Radio replacement T-harness for select Subaru, Scion, Toyota vehicles 2013-2019. Greatly simplifies the installation of the Maestro RR module sold separately.
Click Here to View Vehicle Coverage Information - confirmed through 2021
Head-Unit Replacement T-harness for Select 2004-2018 Toyota and Scion Vehicles
Greatly simplifies the installation of the Maestro RR module sold separately.
Click Here to View Vehicle Coverage Information
Single 10-Inch 600-Watt 2-Ohm Subwoofer-Enclosure for Select 2013-Up Subaru BRZ, 2013-2016 Scion FR-S, and 2016-UP Toyota 86 Vehicles
Somebody finally paid attention and designed a no-nonsense, back-to-basics sports car that puts the emphasis on driving enjoyment. Now all you need to do is add a healthy dose of JL Audio to ratchet up the listening enjoyment and make every drive even more memorable.
JL's patented 10TW3 thin-line driver is the engine inside this Stealthbox® system, and it produces spectacular results from its perch in the passenger side rear corner of the trunk. Your trunk remains completely useful and your installation is neat and secure. A grille is also included to protect your investment.
The Hard Data: Contains one 10TW3-D4 subwoofer in a sealed enclosure. 400 watt power handling. Wired for 2 ohm mono. Installs in the passenger side of trunk compartment. Black steel mesh woofer grille is included.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
JL Audio SB-S-BRZFRS/10TW3 Installation Manual
Single 10-Inch 2-Ohm 400-Watt Subwoofer-Enclosure for Select 2010-2024 Toyota 4Runner Vehicles
The 5th Generation 4Runner has been long-overdue for a Stealthbox solution. When JL finally approached the challenge, thy knew 4Runner owners cared about the vehicle's cargo space and JL-Audio didn't want to interfere with OEM cargo slides or aftermarket cargo drawer systems. The result is the addition of a spectacular 400 watt, 10-inch subwoofer solution tucked nicely behind the factory cargo panel.
The Hard Data: Contains one 10TW3-D4 subwoofer in a sealed enclosure. 400 watt power handling. Wired for 2 ohm mono. Installs behind factory panel in the passenger side rear cargo area. Subwoofer is protected by the included black steel mesh grille and concealed by a fabric grille. Installation requires permanent modification to the factory panel. Installation in models equipped with an "OEM" subwoofer require purchase of a standard factory panel from Toyota Parts. Will not fit models with third row seating.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
Applications
TOYOTA
4Runner
2010-2024
JL Audio SB-T-4RNRG5/10TW3 Installation Manual
Single 10-Inch 400-Watt 2-Ohm Thin Subwoofer-Enclosure for Select 2016-Up Toyota-Tacoma Access-Cab Pickups
The Access Cab version of Toyota's midsize truck has minimal backseat space for passengers and almost no room for a bulky subwoofer enclosure.
JL Audio’s Stealthbox® design team developed a clever solution that mounts between the jump seats, creating a nice arm rest with dual storage trays for rear passengers. Equipped with their innovative 10-inch TW3 thin-line subwoofer, this downfiring Stealthbox® features an all-fiberglass, sealed enclosure design and delivers stunning deep-bass output. Rear seat folding remains unaffected.
The Hard Data: Contains one 10TW3-D4 subwoofer in a sealed enclosure. 400 watt power handling. Wired for 2 ohm mono. Replaces rear center console.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
Applications
TOYOTA
Tacoma
Access Cab
2016-2025
JL Audio SB-T-TACACG3/10TW3 Installation Manual
Dual 10-Inch 800-Watt 2-Ohm Thin Subwoofer-Enclosure for Select 2014-2021 Toyota Tundra-CrewMax Pickups
Toyota's largest truck definitely means business when it comes to hauling people (or cargo) in comfort. With four full-sized doors and a spacious cabin, this mighty Tundra delivers maximum interior space, but leaves little room for a traditional subwoofer enclosure.
JL Audio's Stealthbox® team met this challenge and designed a custom formed solution that fits behind your Tundra's rear seat backs that is completely hidden, out-of-sight. Housing two of JL's patented-technology TW3 thin-line subwoofer drivers in a sealed enclosure, this Stealthbox securely installs without any permanent modifications and delivers world-class bass performance with powerfully deep impact and extension.
The Hard Data: Contains two 10TW3-D8 subwoofer drivers in a sealed enclosure. 800 watt power handling. Wired for 2 ohm mono. Installs behind rear seat-backs and requires no permanent modifications to the vehicle. Factory subwoofer (if equipped) must be removed and jack tools must be relocated for installation of Stealthbox.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
JL Audio SB-T-TCMAX/10TW3 Installation Manual
Dual 10-Inch 800-Watt 2-Ohm Thin Subwoofer-Enclosure for Select 2007-2021 Toyota-Tundra Double-Cab with Black or Red-Rock Interior
The full-size truck wars are in full-effect, and Toyota is not being left behind. This new Tundra offers amazing space for people and cargo, along with impressive interior quality and refinement.
One area in which this big truck needs some help is in the audio department, where a quality sub-bass solution is desperately needed. To this end, JL's Stealthbox® team deployed a pair of their patented thin-line technology subwoofer drivers and wrapped them in an optimized sealed enclosure. This enclosure is designed to install underneath the rear bench seat, where it remains completely out of sight, but delivers a powerful low-frequency punch.
The Hard Data: Contains two 10TW3-D8 subwoofer drivers in a sealed enclosure. 800 watt power handling. Wired for 2 ohm mono. Installs under driver-side rear seat and requires no permanent modifications to the vehicle. Will not fit Tundra CrewMax.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
JL Audio SB-T-TUNDB3/10TW3 Installation Manual
Single 13-Inch 600-Watt 4-Ohm Thin Subwoofer-Enclosure for Select 2007-2013 Toyota Tundra-CrewMax Pickups
Toyota's largest truck offers amazing people space, but doesn't leave much for a traditional subwoofer enclosure. It's a good thing JL Didn't let conventional thinking get in the way of creating Stealthbox® solutions.
Using the remarkable 13TW5v2 thin-line subwoofer, JL Audio have created a powerful Stealthbox® that can be installed behind the back seat of the big Tundra. One is enough for creating outstanding sub-bass with deep extension and solid impact, but for those looking for maximum performance, installing a pair of them will deliver up to 6dB more output.
The Hard Data: Contains one 13TW5v2-4 subwoofer in a sealed enclosure. 600 watt power handling. Wired for 4 ohm mono. Installs behind the rear bench. One notch of seat travel is lost with installation and full-recline of the seat-back is only available when the seat is in its more forward positions. If the vehicle is equipped with the factory JBL® subwoofer, you must do one of the following to install the Stealthbox®: A) Permanently modify (cut) the factory trim panel. B) Obtain a replacement “no-subwoofer” trim panel from Toyota Parts prior to installation.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
JL Audio SB-T-TUNDCMAX/13TW5v2 Installation Manual
Single 12-Inch 400-Watt 2-Ohm Thin Subwoofer-Enclosure for Select 2022-UP Toyota Tundra-CrewMax Pickups
Toyota's largest truck definitely means business when it comes to hauling people (or cargo) in comfort. With four full-sized doors and a spacious cabin, this mighty Tundra delivers maximum interior space, but leaves little room for a traditional subwoofer enclosure.
JL Audio's Stealthbox® team met this challenge and designed a custom formed solution that fits behind your Tundra's rear seat backs that is completely hidden, out-of-sight. Housing one of JL's patented-technology TW3 thin-line subwoofer drivers in a sealed enclosure, this Stealthbox securely installs without any permanent modifications and delivers world-class bass performance with powerfully deep impact and extension.
The Hard Data: Contains one 12TW3-D4 subwoofer drivers in a sealed enclosure. 400 watt power handling. Wired for 2 ohm mono. Installs under driver rear seat and requires no permanent modifications to the vehicle. Factory subwoofer (if equipped) must be removed and jack tools may need to be relocated for installation of Stealthbox.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
Applictions
TOYOTA
Tundra
Crew Max
2022-2025
JL Audio SBX-T-TCMAX3G/12TW3 Installation Manual
Head-Unit Replacement Female Antenna-Adapter for Select 1988-2008 GM Vehicles
If you are replacing the radio in your vehicle, this antenna cable adapter ensures that you can continue to use your factory antenna. It is a simple yet necessary cable that adapts the vehicle’s original antenna cable to plug into an aftermarket radio with a male Motorola™ connector on one end and a female a connector for a mini “barbed” or “barbless” plug from the factory antenna on the other.
Antenna adapter cable
Used to adapt the vehicle’s antenna cable to use with an aftermarket radio
Male Motorola™ connector on one end
Female connector for a mini “barbed” or “barbless” plug from the factory antenna on the other end
Enter your vehicle model to see if this is compatible with your vehicle
Applications
BUICK
Century
1988-2005
Electra
1988-1990
LaCrosse (aka Allure in Canada)
2005-2009
LeSabre
1988-1999
Park Avenue
1988-2005
Rainier
2004-2007
Reatta
1988-1991
Regal
1988-2004
Rendezvous
2002-2007
Riviera
1986-1999
Roadmaster
1991-1996
Skylark
1987-1998
Skyhawk
1988-1989
Terraza
2005-2007
CADILLAC
Brougham
1987-1992
Catera
1997-2001
Coupe DeVille
1988-1993
DeVille
1988-2005
Eldorado
1988-2002
Escalade ESV
2003-2006
Escalade EXT
2002-2006
Escalade
1999-2006
Fleetwood
1988-1996
Fleetwood Brougham
1990-1992
Seville
1988-2004
STS
2005-2011
CHEVY
Astro Van
1985-2005
Avalanche
2002-2006
Beretta
1988-1996
C/K Pickup
1995-2000
Camaro
1990-2002
Caprice
1991-1996
Cavalier
1988-2005
Celebrity
1990-1990
Classic (a.k.a. Malibu)
2004-2005
Cobalt
2005-2006
Colorado
2004-2012
Corsica
1988-1996
Corvette
1990-2013
Equinox
2005-2006
Express
1996-2007
G-Series Van
1988-1996
Impala
1994-2005
Kodiak C4500-8500
2003-2009
Lumina
1990-2001
Lumina APV
1990-1996
Malibu
1997-2007
Malibu Classic
2008
Classic (a.k.a. Malibu Classic)
2004-2005
Malibu Maxx
2004-2007
Monte Carlo
1995-2005
S-10 Blazer
1988-2005
S-10 Pickup
1989-2004
Silverado Classic
2007
Silverado
2003-2006
Silverado 1500, 2500
1999-2002
Silverado 3500
2001-2002
SSR
2003-2006
Suburban
1988-2006
Tahoe
1995-2006
Tracker
1998-2004
Trailblazer
2002-2009
Uplander
2005-2008
Venture
1997-2005
GMC
Canyon
2004-2012
Envoy
1998-2009
G-Series Van
1988-1996
Jimmy (a.k.a. Jimmy Envoy)
1998-2001
Jimmy
1988-1997
Safari
1985-2005
Savana
1996-2007
Sierra Classic
2007
Sierra
2003-2006
Sierra 1500
1999-2002
Sierra 2500
1999-2002
Sierra 2500 HD
2000-2002
Sierra 3500
2001-2002
C/K Pickup
1995-1998
Sonoma
1998-2004
S-15 Sonoma
1986-1997
Suburban
1988-1999
Topkick C4500-8500
2003-2009
Yukon XL
2000-2006
Yukon
1995-2006
Yukon XL Denali
2001-2006
Yukon Denali
1999-2006
HUMMER
H2
2003-2007
H3
2006-2010
HYUNDAI
Santa Fe
2003-2006
ISUZU
Ascender
2003-2008
Hombre
1998-2001
I-290, I-370
2007-2008
I-280, I-350
2006-2006
KIA
Sorento
2003-2006
OLDSMOBILE
Achieva
1992-1998
Alero
1999-2004
Aurora
1995-2000
Bravada
1991-2004
Cutlass
1997-1999
Cutlass Calais
1988-1991
Cutlass Ciera
1988-1996
Cutlass Supreme
1988-1997
Eighty-Eight
1988-1999
Intrigue
1998-2002
LSS
1996-1999
Ninety-Eight
1988-1996
Regency
1997-1998
Silhouette
1997-1999
Silhouette APV
1990-1996
Touring Sedan
1988-1990
Toronado
1983-1993
PONTIAC
6000
1986-1991
Aztec
2001-2005
Bonneville
1992-1999
Bonneville Safari Wagon
1987-1989
Firebird, Firebird Trans Am
1988-2002
G6
2005-2009
Grand Am
1988-2005
Grand Prix
1988-2008
Lemans
1988-1993
Montana
1999-2005
Montana SV6
2005-2007
Sunbird
1988-1994
Sunfire
1995-2005
Torrent
2006
TransSport
1997-1999
TransSport APV
1990-1996
Vibe
2003-2008
SAAB
9-7x
2005-2009
SATURN
Relay
2005-2007
S Series
1991-1999
TOYOTA
Matrix
2003-2008
Head-Unit Replacement Antenna-Adapter for Select 2005-UP Acura, Fiat, Honda, Mazda and Toyota Vehicles
If you are replacing the radio in your vehicle, this antenna cable adapter ensures that you can continue to use your factory antenna. It is a simple yet necessary cable that adapts the vehicle’s original antenna cable to plug into an aftermarket radio with a male Motorola-style connector, a blue wire lead on one end and a female Honda-style snap-lock antenna connector on the other.
Antenna adapter cable
Used to adapt the vehicle’s antenna cable to use with an aftermarket radio
Male Motorola™ connector and a blue wire lead on one end
Female Honda-style snap-lock antenna connector on the other end
A blue wire is attached to the adapter that connects to the antenna turn-on lead of the aftermarket radio
Applications
ACURA
MDX
2005-2013
RDX
2007-2012
TL
2007-2008
TSX
2009-2014
FIAT
Fiat 124 Spider
2017-2020
HONDA
Accord
2008-2012
Accord Crosstour
2010-2011
Civic
2006-2011
CR-V
2007-2011
Crosstour
2012-2015
Element
2005-2011
Fit
2007-2013
Insight
2010-2014
Odyssey
2005-2010
Pilot
2006-2011
Ridgeline
2005-2014
MAZDA
2
2011-2014
3
2010-2018
5
2012-2015
6
2009-2021
CX-3
2016-2021
CX-5
2013-2020
CX-7
2010-2012
CX-9
2010-2020
MX-5 Miata, MX-5 Miata RF
2016-2020
SUZUKI
Kizashi
2010-2013
TOYOTA
Yaris, Yaris Sedan
2019-2020
Yaris iA
2017-2018
Head-Unit Replacement Female Antenna-Adapter for Select 2005-UP Acura, Fiat, Honda, Mazda and Toyota Vehicles
If you are replacing the factory antenna in your vehicle, this antenna cable adapter ensures that you can continue to use your original factory radio. It is a simple yet necessary cable that adapts the aftermarket antenna cable to plug into the vehicle’s factory radio with a female Motorola™ connector, a blue wire lead on one end and a male Honda-style connector on the other.
Antenna adapter cable
Used to adapt the vehicle’s original factory radio to use with an aftermarket antenna
Female Motorola™ connector and a blue wire lead on one end
Male Honda-style antenna connector on the other end
A blue wire is attached to the adapter that connects to the antenna turn-on lead of the factory radio
Enter your vehicle model to see if this is compatible with your vehicle
Applications
ACURA
MDX
2005-2013
RDX
2007-2012
TL
2007-2008
TSX
2009-2014
FIAT
Fiat 124 Spider
2017-2020
HONDA
Accord
2008-2012
Accord Crosstour
2010-2011
Civic
2006-2011
CR-V
2007-2011
Crosstour
2012-2015
Element
2005-2011
Fit
2007-2013
Insight
2010-2014
Odyssey
2005-2010
Pilot
2006-2011
Ridgeline
2005-2014
MAZDA
2
2011-2014
3
2010-2018
5
2012-2015
6
2009-2021
CX-3
2016-2021
CX-5
2013-2020
CX-7
2010-2012
CX-9
2010-2020
MX-5 Miata, MX-5 Miata RF
2016-2020
SUZUKI
Kizashi
2010-2013
TOYOTA
Yaris, Yaris Sedan
2019-2020
Yaris iA
2017-2018
Head-Unit Add-On Male and Female Antenna-Adapter Cable Set for Select 2005-UP Acura, Fiat, Honda, Mazda and Toyota Vehicles
If you are adding an external device with a built-in FM modulator in your vehicle, these antenna cable adapters ensure that you can continue to use your factory radio and antenna. These are simple yet necessary cables that adapt the vehicle’s original factory radio and antenna connectors to plug into the FM modulator.
Antenna adapter kit
Used to adapt the vehicle’s original factory radio and antenna connectors to use with an FM modulator
Cable #1 has a male Motorola™ connector on one end and a female Honda-style snap-lock antenna connector on the other
Cable #2 has a female Motorola™ connector on one end and a male Honda-style antenna connector on the other
A blue wire is attached to the adapter that connects to the antenna turn-on lead of the radio
Enter your vehicle model to see if this is compatible with your vehicle
Applications
ACURA
MDX
2005-2013
RDX
2007-2012
TL
2007-2008
TSX
2009-2014
FIAT
Fiat 124 Spider
2017-2020
HONDA
Accord
2008-2012
Accord Crosstour
2010-2011
Civic
2006-2011
CR-V
2007-2011
Crosstour
2012-2015
Element
2005-2011
Fit
2007-2013
Insight
2010-2014
Odyssey
2005-2010
Pilot
2006-2011
Ridgeline
2005-2014
MAZDA
2
2011-2014
3
2010-2018
5
2012-2015
6
2009-2021
CX-3
2016-2021
CX-5
2013-2020
CX-7
2010-2012
CX-9
2010-2020
MX-5 Miata, MX-5 Miata RF
2016-2020
SUZUKI
Kizashi
2010-2013
TOYOTA
Yaris, Yaris Sedan
2019-2020
Yaris iA
2017-2018
Stereo Replacement Antenna Adapter for Select 2006-UP Lexus, Scion, Subaru, and Toyota Vehicles
If you are replacing the radio in your vehicle, this antenna cable adapter ensures that you can continue to use your factory antenna. It is a simple yet necessary cable that adapts the vehicle’s original antenna cable to plug into an aftermarket radio with a male Motorola™ connector and a blue wire lead on one end, and a female Molex connector on the other.
Antenna adapter cable
Used to adapt the vehicle’s antenna cable to use with an aftermarket radio
Male Motorola™ connector and a blue wire lead on one end
Female Molex connector on the other end
A blue wire is attached to the adapter that connects to the antenna turn-on lead of the aftermarket radio
Enter your vehicle model to see if this is compatible with your vehicle
Applications
LEXUS
CT 200h
2011-2017
ES Series
2019-2020
ES 300h, ES 350
2013-2018
GS Series
2013-2020
GS 350, GS 450h, GS 460
2010-2011
GX 460
2010-2020
HS 250h
2010-2012
IS Series
2014-2020
IS 250C, IS 350C, IS F
2006-2015
IS 250, IS 350
2006-2013
LC Series
2018-2020
LFA
2012-2012
LS Series
2013-2020
LS 460
2010-2012
LS 600h L
2010-2016
LX 570
2010-2020
NX Series
2015-2020
RC Series
2013-2020
RX Series
2016-2020
RX 350, RX 450h
2010-2015
UX Series
2019-2020
SCION
FRS
2013-2016
iM
2016
tC
2014-2015
SUBARU
Ascent
2019-2022
BRZ
2013-2022
Crosstrek
2016-2023
Forester
2014-2018
Impreza
2012-2023
Impreza WRX
2013-2014
Legacy
2012-2019
Outback
2012-2019
WRX STI
2016-2021
WRX
2015-2021
XV Crosstrek
2013-2015
TOYOTA
4Runner
2014-2023
86
2017-2020
Avalon
2013-2020
C-HR
2018-2022
Camry
2012-2022
Corolla
2012-2023
Corolla Hatchback
2019-2023
Corolla iM
2017-2018
FJ Cruiser
2011-2014
Highlander
2013-2023
Land Cruiser
2010-2020
Matrix
2013-2014
Mirai
2016-2019
Prius
2012-2020
Prius Plug-In (PHV)
2012-2015
Prius C
2012-2019
Prius Prime
2017-2020
Prius V
2012-2017
RAV4
2019-2020
RAV4 (non-EV)
2013.5-2018
RAV4 (non-EV)
2013-2013.5
RAV4
2012
Sequoia
2013-2022
Sienna
2015-2020
Tacoma
2012-2023
Tundra
2014-2021
Venza
2013-2015
Yaris
2018
Yaris
2012-2017
