At this present time our store location is open by appointment only.

150W RMS

Subs, Speakers and Electronics with an RMS Power Rating of 150-Watts

Subs, Speakers and Electronics with an RMS Power Rating of 150-Watts

The RMS rating of any speaker or subwoofer driver is the continuous power rating that the driver is designed to handle at a maximum volume rating. The RMS rating is one of two numbers to go by when pairing your speakers with an amplifier. As an example, a speaker with a 150-Watt, or 150W for short, RMS rating should be paired with a one-hundred-fifty-watt RMS amp. We usually recommend a power-plant to be over powered by 10 – 20% RMS so that the amplifier does not have to work at 100% capacity to get 100% efficiency from your speakers.

9 products

  • JL Audio 6W3v3-4 : 150W 6.5" Subwoofer Driver, 4Ω JL Audio 6W3v3-4 : 150W 6.5" Subwoofer Driver, 4Ω, rear view.

    JL Audio 6W3v3 : 150W 6.5" Subwoofer Driver, 4Ω

    Pre-Order Today!

    W6-Series 6.5-Inch 150-Watt Subwoofer Driver, 4-Ohm If you need a small-format subwoofer that really delivers in extremely small enclosures, this is where your search ends. The 6W3v3 is a true subwoofer, through-and-through. It employs the same technologies as its larger diameter brethren to deliver a whopping 0.35 in. (8.9 mm) one-way linear excursion. The 6W3v3-4 is best used with amplifier power in the 50W - 150W range and is optimized to operate in a tiny 0.15 cu. ft. (4.2 l) sealed enclosure, or a 0.25 cu. ft. ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab. General Specifications Continuous Power Handling (RMS) 150 W Recommended Amplifier Power (RMS) 50 - 150 W Nominal Impedance (Znom) 4 Ω JL Audio 6W3v3 Manual

    Pre-Order Today!

    $279.99

  • JL Audio 8W1v3-4 : 150W 8" Subwoofer Driver, 4Ω Single Voice Coil JL Audio 8W1v3-4 : 150W 8" Subwoofer Driver, 4Ω Single Voice Coil, top side.

    JL Audio 8W1v3 : 150W 8" Subwoofer Driver, 4Ω Single Voice Coil

    Pre-Order Today!

    W1-Series 8-Inch 150-Watt Subwoofer Driver, 4-Ohm SVC The 8W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (3.86 in. / 98 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 8-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio's proprietary technologies enhance its performance and reliability. The 8W1v3-4 is best used with amplifier power in the 50W - 150W range and is optimized to operate in a compact 0.350 cu. ft. (9.90 l) sealed enclosure. General Specifications Continuous Power Handling (RMS) 150 W Recommended Amplifier Power (RMS) 50 - 150 W Nominal Impedance (Znom) 4 Ω JL Audio 8W1v3 Manual

    Pre-Order Today!

    $199.99

  • JL Audio CP106LG-W3v3 : 6" Subwoofer Enclosure - 150W RMS 4Ω Ported JL Audio CP106LG-W3v3 : 6" Subwoofer Enclosure - 150W RMS 4Ω Ported, side view.

    JL Audio CP106LG-W3v3 : 6" Subwoofer Enclosure, 150W RMS 4Ω Ported

    Pre-Order Today!

    MicroSub-Series 6-Inch 150-Watt Enclosed Subwoofer System, 4Ω Ported Enclosure This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 6W3v3 subwoofer driver into an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 50 - 150WNominal Impedance: 4 Ω General Specifications Continuous Power Handling (RMS) 150 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 14.125 in / 359 mm External Height (H) 9.625 in / 245 mm External Depth (D1) 5.125 in / 130 mm Net Weight 12 lb / 5.44 kg JL Audio CP106LG-W3v3 Brochure

    Pre-Order Today!

    $329.99

  • 6x9" 3-Way Coaxial Speakers, 150W : Kicker 46CSC6934 6x9" 3-Way Coaxial Speakers, 150W : Kicker 46CSC6934 shown with no grille.

    Kicker 46CSC6934 : 6x9" 3-Way Coaxial Speakers, 150W

    Pre-Order Today!

    150-Watt 6x9-Inch Coaxial Speakers, 4-Ohm These CS series 6x9" coaxial speakers by Kicker are a significant upgrade in your sound. A stamped-steel speaker driver chassis supports a rigid polypropylene cone and UV-treated foam surrounds that stand up to heat and direct sunlight. These 150W coaxial's have neodymium tweeter magnets allow for increased volume in high frequencies. These Kicker CS series 6 by 9" speakers work best with 150 watts of recommended power. Specifications Speaker Design 3 - way Woofer Size | in [mm] 6x9 [160x230] Mid Size | in [mm] 2 [50] Tweeter Size | in [mm] 1/2 [13] DC Resistance | ohm 3.5 Peak Power | Watts 450 Continuous Power | Watts, RMS 150 Sensitivity [SPLo] | dB @ 1W, 1m 92 Effective Frequency Range | Hz 30-20k Mounting Hole Diameter | in [mm] 5 5/8 x 8 7/16 [143x215] Top Mount Depth | in [mm] 7/16 [12] Bottom Mount Depth | in [mm] 3 3/16 [81] Tweeter Protrusion | in [mm] 1/16 [1] Grilles Yes Tweeter Magnet Material Electric Crystal Motor Tweeter Dome Material PEI [polyether imide] Tweeter Design Balanced dome Woofer Cone Material Polypropylene Woofer Surround Material Polyester foam Kicker CS Series Coaxial Speaker Manual

    Pre-Order Today!

    $129.99

  • Kicker 46CSS694 : 150-Watt Component Speakers Six-x-Nine" Drivers 6x9" 150W Component Speaker System : Kicker 46CSS694 woofer.

    Kicker 46CSS694 : 6x9" 150W Component Speaker System

    Pre-Order Today!

    150-Watt Component Speakers Six-x-Nine" Drivers The CS Series 6-x-9 inch component speakers by Kicker are designed for easy installation in nearly any vehicle. These components include separate titanium flush, angled or surface-mount tweeters and two-way crossovers with tweeter level control to let you customize your sound for the best sonic quality. The Kicker CS Series six-by-nine" speakers work best with up to 150-watts of recommended power. Specifications  Woofer Size | in [mm] 6x9 [160x230] Tweeter Size | in [mm] 3/4 [20] Dome Material Titanium Peak Power | [watts] 450 Continuous Power | [watts RMS] 150 Effective Frequency Range | Hz 30-21k Woofer Mounting Hole Diameter | in [mm] 5 5/8 x 8 7/16 [143x215] Woofer Bottom Mount Depth | in [mm] 3 3/16 [81] Flush Mounting Tweeter Hole Diameter | in [mm] 1 9/16 [40] Flush Mount Tweeter Depth | in [mm] 9/16 [14.5] High Pass | dB, at Frequency | Hz 12, 4000 Low Pass | dB, at Frequency | Hz 12, 4000 High Frequency Output Attenuation | dB 0, 3, & 6 Bolt-Thru Grilles Yes Kicker CS Component Speaker Manual

    Pre-Order Today!

    $199.99

  • Kicker 47KSC6904 : Six-by-Nine-Inch Coaxial Speaker Drivers, 150-Watt RMS. Kicker 47KSC6904 : Six-by-Nine-Inch Coaxial Speaker Drivers, 150-Watt RMS, side view.

    Kicker 47KSC6904 : 6x9" 150W Coaxial Speakers

    Pre-Order Today!

    Six-by-Nine-Inch Coaxial Speaker Drivers, 150-Watt RMS The Kicker KS series 6x9-inch coaxial speakers come with custom bracketing options, built specifically to fit in today’s GM, Chrysler, Subaru, Toyota and Jeep factory speaker locations. KS series speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. They work best with 15 to 150 watts of recommended power. High power handling Tough rubber surrounds Thin-mount design easily fits behind factory grilles Brackets for select GM/Chrysler/Subaru/Jeep and Toyota included Specifications Speaker Design 2-Way Woofer [in, mm] 6 x 9, 160 x 230 Tweeter [in, mm] 1, 25 Rated Impedance [Ω] 4 Recommended Amplifier Power [Watts RMS] 15-150 Sensitivity [1W, 1m] 92 Frequency Response [Hz] 30-21k Mounting Hole Diameter [in, mm] 5-11/16 x 8-7/16, 144 x 215 Top Mount Depth [in, mm] 3-3/16, 81 Bottom Mount Depth [in,mm] 3-11/16, 93 Tweeter Protrusion [in,mm] 1/16, 1 Grilles Yes Tweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber Kicker KS Series Coaxial Speaker Manual

    Pre-Order Today!

    $159.99

  • Sale -$60.00Last One! Kicker 47KSC69304 : Six-by-Nine-Inch 3-Way Coaxial Speaker Drivers, 150-Watt RMS Kicker 47KSC69304 : Six-by-Nine-Inch 3-Way Coaxial Speaker Drivers, 150-Watt RMS, top side view.

    Kicker 47KSC69304 : 6x9" 150W 3-Way Coaxial Speakers - Discontinued

    1 Available for pickup

    Six-by-Nine-Inch 3-Way Coaxial Speaker Drivers, 150-Watt RMS The Kicker KS series 6x9-inch 3-way coaxial speakers come with custom bracketing options, built specifically to fit in today’s GM, Chrysler, Subaru, Toyota and Jeep factory speaker locations. KS series speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. They work best with 15 to 150 watts of recommended power. High power handling Tough rubber surrounds Thin-mount design easily fits behind factory grilles Brackets for select GM/Chrysler/Subaru/Jeep and Toyota included Specifications Speaker Design 2-Way Woofer [in, mm] 6 x 9, 160 x 230 Midrange [in, mm] 1, 25 Tweeter [in, mm] 3/4, 20 Rated Impedance [Ω] 4 Recommended Amplifier Power [Watts RMS] 15-150 Sensitivity [1W, 1m] 92 Frequency Response [Hz] 30-21k Mounting Hole Diameter [in, mm] 5-11/16 x 8-7/16, 144 x 215 Top Mount Depth [in, mm] 3-1/8, 80 Bottom Mount Depth [in,mm] 3-5/8, 92 Tweeter Protrusion [in,mm] 3/16, 5 Grilles Yes Tweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber Kicker KS Series Coaxial Speaker Manual

    1 Available for pickup

    $189.99$129.99

  • Kicker 48CWRT67 : 150W 6.75" Thin Subwoofer Driver, 1Ω or 2Ω Dual Voice Coil Kicker 48CWRT67 : 150W 6.75" Thin Subwoofer Driver, 1Ω or 2Ω Dual Voice Coil, left side.

    Kicker 48CWRT67 : 150W 6.75" Thin Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil

    Pre-Order Today!

    6.75-Inch 150-Watt Thin Subwoofer Driver, 1-Ohm or 2-Ohm DVC The CompRT 6.75" thin subwoofer by Kicker is a weather resistant thin sub with a 1Ω or 2Ω dual voice coil design. This thin 6.75 inch sub magnet structure delivers 150W RMS of power with a chassis mounting depth of 2 3/4". The Kicker designed UniPlate™ back plate and solid pole piece serve as a single heat-absorbing unit to keep this 6.75" CompRT thin subwoofer driver nice and cool.The CompRT 6.75-Inch subwoofer works best with a sealed or ported enclosure and 150 watts of recommended power. Specifications SIZE [in, cm]: 6 13/16, 17.3 IMPEDANCE [Ohms]: 2 or 4 DVC Recommended Amplifier Power (watts RMS) 150 Peak Power (watts, per ANSI/CTA-2031-A) 300 SENSITIVITY [dB 1w/1m]: 82.6 MOUNTING DEPTH [in, cm]: 2 3/4, 7 MOUNTING DIAMETER [in, cm]: 5 5/8, 14.3 MIN SEALED BOX VOL [cu. ft, L]: 0.18, 5.1 MAX SEALED BOX VOL [cu. ft, L]: 0.75, 21.24 Kicker CompRT Subwoofer Manual

    Pre-Order Today!

    $119.99

  • Kicker 48TCWRT672 : 150W Dual 6.75" Thin Subwoofer Enclosure, 2Ω Configuration Kicker 48TCWRT672 : 150W Dual 6.75" Thin Subwoofer Enclosure, 2Ω Configuration, left side.

    Kicker 48TCWRT672 : 150W Dual 6.75" Thin Subwoofer Enclosure, 2Ω Configuration

    Pre-Order Today!

    6 3/4-Inch 150-Watt RMS Loaded Dual Thin Subwoofer Enclosure, 2-Ohm Final Impedance The CompRT Thin Profile 6-¾-Inch subwoofer enclosure comes loaded with a Reflex subwoofer and RT sub, then carpeted and loaded with a single 2Ω terminal. Covered in sleek black carpeting and built with stout MDF construction & rounded corners, these tough enclosures take plenty of power, yet fit nearly anywhere. The Kicker 43TCWRT672 enclosure works best with 150 watts of RMS power. Specifications Woofer [in, cm] 6-¾, 165 Recommended Amplifier Power (watts RMS) 150 Peak Power (watts, per ANSI/CTA-2031-A) 300 Rated Impedance [Ω] 2 Frequency Response [Hz] 35-500 BOX TOP DEPTH (in, cm): 3-5⁄16 , 8.5 BOX BOTTOM DEPTH (in, cm): 5-11⁄16 , 14.5 BOX HEIGHT (in, cm): 10, 25.4 BOX WIDTH (in, cm): 15-¼, 38.7 Kicker CompRT Subwoofer Enclosure Manual

    Pre-Order Today!

    $179.99

Login

Forgot your password?

Don't have an account yet?
Create account