At this present time our store location is open by appointment only.

500W RMS

Subs, Speakers and Electronics with an RMS Power Rating of 500-Watts

Subs, Speakers and Electronics with an RMS Power Rating of 500-Watts

The RMS rating of any speaker or subwoofer driver is the continuous power rating that the driver is designed to handle at a maximum volume rating. The RMS rating is one of two numbers to go by when pairing your speakers with an amplifier. As an example, a speaker with a 500-Watt, or 500W for short, RMS rating should be paired with a five-hundred-watt RMS amp. We usually recommend a power-plant to be over powered by 10 – 20% RMS so that the amplifier does not have to work at 100% capacity to get 100% efficiency from your speakers.

5 products

  • JL Audio ACP208LG-W3v3 : 8" Powered Dual Subwoofer Enclosure - 500W JL Audio ACP208LG-W3v3 : 8" Powered Dual Subwoofer Enclosure,  side view.

    JL Audio ACP208LG-W3v3 : 8" Powered Dual Subwoofer Enclosure - 500W Ported

    Pre-Order Today!

    W3-Series 500-Watt Amplified Dual 8-Inch Ported Subwoofer System With MicroSub+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes JL's exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance W3v3 drivers. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency. Key to the enclosure’s performance is its efficient slot-ported design and precise tuning of its dual 8Wv3 subwoofer drivers, each in its separate airspace. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port for each driver wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The two flared port entries/exits, one on each end of the enclosure, further enhance sound quality by minimizing air-flow noises through each port. Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems. Note: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. Steel mesh grilles are included to protect the subwoofer drivers. Construction: CNC-Cut High-Grade MDF Amplifier power: Built-in DCD™ Class D amplifier (500 W @ 0.20 Ω)Nominal Impedance: 0.20 Ω Enclosure and Subwoofers Built in USA with global components. General Specifications Continuous Power Handling (RMS) Built-in amplifier 500 W @ 0.20 Ω System Nominal Impedance 0.20 Ω Input Voltage Range @ RCA Inputs 70 mV - 1.40 V RMS Input Voltage Range @ High-Level Inputs 280 mV - 5.4 V RMS Recommended Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 30 A (ATO or ATC) Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh Signal Processing  Filter Mode(s) Low-Pass only Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 200 Hz Output Polarity Switch Yes Remote Subwoofer Level Control Optional (RBC-1) Physical Specifications External Width (W) 36.625 in / 905 mm External Height (H) 11.125 in / 283 mm External Depth (D1) 5.125 in / 130 mm Net Weight 34.9 lb / 15.83 kg

    Pre-Order Today!

    $929.99

  • JL Audio CP208LG-W3v3 : Dual 8" Subwoofer Enclosure - 500W RMS 2Ω Ported JL Audio CP208LG-W3v3 : Dual 8" Subwoofer Enclosure - 500W RMS 2Ω Ported, side view.

    JL Audio CP208LG-W3v3 : Dual 8" Subwoofer Enclosure, 500W RMS 2Ω Ported

    Pre-Order Today!

    MicroSub-Series 8" Enclosed Dual 8-Inch 500-Watt Subwoofer System, 2Ω Ported Enclosure This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its dual 8W3v3 subwoofer drivers, each in separate airspace, with an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port for each driver wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The two flared port entries/exits, one on each end of the enclosure, further enhance sound quality by minimizing air-flow noises through these ports. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. Steel mesh grilles are included to protect the subwoofer drivers. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 200 - 500WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 500 W System Nominal Impedance 2 Ω Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh Physical Specifications Net Weight 32.2 lb / 14.61 kg External Width (W) 35.5 in / 902 mm External Height (H) 11.0 in / 279 mm External Depth (D1) 5.125 in / 130 mm JL Audio CP208LG-W3v3 Brochure

    Pre-Order Today!

    $729.99

  • JL Audio SB-GM-C6CONV/8W3v3 - 2005-203 Chevy C6 Corvette Loaded Dual Subwoofer Enclosure 8" 500W RMS 2Ω JL Audio SB-GM-C6CONV/8W3v3 - 2005-203 Chevy C6 Corvette Loaded Dual Subwoofer Enclosure 8" 500W RMS 2Ω, installed in behind head rests.

    JL Audio SB-GM-C6CONV/8W3v3 : 8" Dual 500W Subwoofer Enclosure @ 2Ω, 2005-2013 Corvette C6

    Pre-Order Today!

    Dual 8-Inch 500-Watt Subwoofer-Enclosure for Select 2005-2013 Chevrolet Corvette-C6 Convertible Vehicles The convertible iteration of the sixth-generation Corvette is a beautiful car with stunning performance capabilities. It is also a real challenge when it comes to achieving excellent bass performance. The Stealthbox® solution for the convertible utilizes a pair of ultra-compact sealed enclosures with high-performance 8W3v3 subwoofers. They install neatly behind the seats and under the hard tonneau cover, without affecting convertible top operation. The Hard Data: Contains two 8W3v3-4 drivers in sealed enclosures. 500 watt power handling. Wired for 2 ohm mono. Installs behind seats under hard tonneau cover. Steel mesh grilles are included to protect the subwoofer drivers. If the vehicle is equipped with the optional wind screen, replacement of factory bolts with flat-head bolts (not-supplied) is necessary. Will not fit Coupe models. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-GM-C6CONV/8W3v3 Installation Manual

    Pre-Order Today!

    $1,499.99

  • Kicker 48TCWRT122 : 500W Dual 12" Thin Subwoofer Enclosure, 2Ω Configuration Kicker 48TCWRT122 : 500W Dual 12" Thin Subwoofer Enclosure, 2Ω Configuration, left side.

    Kicker 48TCWRT122 : 500W Dual 12" Thin Subwoofer Enclosure, 2Ω Configuration

    Pre-Order Today!

    12-Inch 500-Watt Loaded Thin Dual Subwoofer Enclosure, 2-Ohm Configuration The CompRT 12" thin subwoofer by Kicker is a weather resistant thin sub with a 2Ω configuration. This thin 12 inch sub magnet structure delivers 500W RMS of power. The Kicker designed UniPlate™ back plate and solid pole piece serve as a single heat-absorbing unit to keep this 12" CompRT thin subwoofer driver nice and cool.The Kicker 43TCWRT122 12" subwoofer enclosure works best with 500 watts of RMS power. Specifications TYPE: single NO. OF WOOFERS/SIZE (in, cm): (1) 12, 30 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 500 Peak Power (watts, per ANSI/CTA-2031-A) 1000 SENSITIVITY (dB 1w/1m): 98 BOX TOP DEPTH (in, cm): 3-1/2, 8.9 BOX BOTTOM DEPTH (in, cm): 7, 17.7 BOX HEIGHT (in, cm): 13-1/2, 34.3 BOX WIDTH (in, cm): 27, 68.5vv Kicker CompRT Subwoofer Enclosure Manual

    Pre-Order Today!

    $319.99

  • Kicker 48TRTP122 : 500W Dual 12" Thin Subwoofer Enclosure Kicker 48TRTP122 : 500W Dual 12" Thin Subwoofer Enclosure, left side.

    Kicker 48TRTP122 : 500W Dual 12" Thin Subwoofer Enclosure

    Pre-Order Today!

    Dual 12-Inch Thin Subwoofer Enclosure, 500-Watt RMS, 2-Ohm The Kicker CompRT series down-firing 12-inch subwoofer enclosure comes loaded with a passive reFLEX™ subwoofer and Kicker CompRT sub, then carpeted and loaded with a single 2Ω terminal.  Covered in stylish black carpeting and built with thick MDF, these tough enclosures take serious power without taking up needed space. The TRTP 12-inch subwoofer enclosure works best with 500-watts of recommended power. Specifications TYPE: thin-profile WOOFER SIZE (in, cm): 12, 30 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 500 Peak Power (watts, per ANSI/CTA-2031-A) 1000 SENSITIVITY (dB 1w/1m): 98 BOX TOP DEPTH (in, cm): 14-5/8, 37 BOX BOTTOM DEPTH (in, cm): 14-5/8, 37 BOX HEIGHT (in, cm): 6-1/8, 15.6 BOX WIDTH (in, cm): 27-1/2, 70 Kicker TRTP Subwoofer Enclosure Manual

    Pre-Order Today!

    $329.99

Login

Forgot your password?

Don't have an account yet?
Create account