At this present time our store location is open by appointment only.

600W RMS

Subwoofer Drivers and Electronics with an RMS Power Rating of 600-Watts

Subs, Speakers and Electronics with an RMS Power Rating of 600-Watts

The RMS rating of any speaker or subwoofer driver is the continuous power rating that the driver is designed to handle at a maximum volume rating. The RMS rating is one of two numbers to go by when pairing your speakers with an amplifier. As an example, a speaker with a 600-Watt, or 600W for short, RMS rating should be paired with a six-hundred-watt RMS amp. We usually recommend a power-plant to be over powered by 10 – 20% RMS so that the amplifier does not have to work at 100% capacity to get 100% efficiency from your speakers.

8 products

  • Alpine S-W10D : 10" 600W Subwoofer Driver, 2Ω or 4Ω DVC

    Alpine S-W10D : 10" 600W Subwoofer Driver, 2Ω or 4Ω DVC

    Pre-Order Today!

    Alpine S-Series 600-Watt 10-Inch Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications. Specifications 10" DVC High Performance Subwoofer Power Handling: 600W RMS/1800W Peak Push-type Insert Terminals with DVC jumper system Concealed Mount Gasket/Grille* System (*Grille sold separately) Frequency Response: 28Hz-200Hz Mounting Depth 4-11/16” Alpine S-W10D2, S-W10D4 Manual

    Pre-Order Today!

    $179.99

  • 600W 15" Subwoofer Driver, 4Ω Single or Dual Voice Coil : Kicker 44CWC 600W 15" Subwoofer Driver, 4Ω Single or Dual Voice Coil : Kicker 44CWC, side view.

    Kicker 44CWC : 600W 15" Subwoofer Driver, 4Ω Single or Dual Voice Coil

    Pre-Order Today!

    15-Inch 600-Watt Subwoofer Driver, 4-Ohm SVC or 4-Ohm DVC This CompC 15" sub driver from Kicker has a thick stamped steel basket that holds an injection-molded polypropylene cone with stabilizing ribs in the surround. The 44CWCS154 and 44CWCD154 15-Inch subs are available in a 4Ω Single Voice or 4Ω Dual Voice coil design with spring loaded speaker terminals. These CompC drivers are rated for 600W RMS of amplified power. Specifications Size (IN.,CM) 15, 38 Impedance (OHMS) 4 SVC or 4 DVC Recommended Amplifier Power (watts RMS) 600 Peak Power (watts, per ANSI/CTA-2031-A) 1200 Sensitivity (dB 1w/1m) 90.3 Frequency Response (Hz) 25-500 Mounting Depth (in, cm) 7, 17.7 Mounting Cutout (in, cm) 13 3/4, 35 Min Sealed Box Vol (cu. ft, L) 2.25, 63.7 Max Sealed Box Vol (cu. ft, L) 5.0, 141.6 Min Vented Box Vol (cu. ft, L) 3.0, 85 Max Vented Box Vol (cu. ft, L) 4.0, 113.3 Kicker CompC Subwoofer Manual

    Pre-Order Today!

    $179.99

  • Alpine S-W12D : 12" 600W Subwoofer, 2Ω or 4Ω DVC

    Alpine S-W12D : 12" 600W Subwoofer, 2Ω or 4Ω DVC

    Pre-Order Today!

    Alpine S-Series 600-Watt 12-Inch Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications. Specifications Power Handling: 600W RMS/1800W Peak @ 2Ω Push-type Insert Terminals with DVC jumper system Concealed Mount Gasket/Grille* System (*Grille sold separately) Frequency Response: 26Hz-200Hz Mounting Depth 5-1/16” Alpine S-W12D2, S-W12D4 Manual

    Pre-Order Today!

    $199.99

  • 600W 10" Square Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 44L7S10 600W 10" Square Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 44L7S10, side view.

    Kicker 44L7S10 : 600W 10" Square Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil

    Pre-Order Today!

    10-Inch Square 600-Watt Subwoofer Driver, 2-Ohm or 4-Ohm DVC The audiophile competition 10" L7 square sub by Kicker has an advanced motor structure that includes a large-diameter spider for less flex, longer life and superior accuracy. This 10 inch 600W driver has two dual high-temp voice coils, an injection-molded polypropylene cone, SoloKon™ 360-degree back bracing, a ribbed Santoprene surround with blue surround stitching and Kicker's patented UniPlate™ back plate and pole piece. Perimeter venting for thermal heat dispersion management keeps this earth shattering 10 inch square sub nice and cool.  This 10" L7 square sub can handle up to 600W RMS of amplifier power and comes with dual spring-loaded speaker terminals for a solid speaker wire connection. Specifications Size (IN.,CM) 10, 25.4 Impedance (OHMS) 2 or 4 DVC Recommended Amplifier Power (watts RMS) 600 Peak Power (watts, per ANSI/CTA-2031-A) 1200 Sensitivity (dB 1w/1m) 86.8 Frequency Response (Hz) 24-100 Mounting Depth (IN.,CM) 6-1/4, 15.9 Mounting Cutout, Square (IN.,CM) 9-5/16, 23.7 Min Rec Sealed Box Volume (CU. FT., Liters) 1, 28.32 Max Rec Sealed Box Volume (CU. FT., Liters) 1.25, 35.4 Min Rec Vented Box Volume (CU. Ft., Liters)** 1.25, 35.4 Max Rec Vented Box Volume (CU. Ft., Liters)** 2.25, 63.8 Kicker Solo-Baric L7 Subwoofer Manual

    Pre-Order Today!

    $279.99

  • 12" 600W RMS Thin Subwoofer Driver, 2Ω or 4Ω DVC : Kicker 46L7T12 12" 600W RMS Thin Subwoofer Driver, 2Ω or 4Ω DVC : Kicker 46L7T12, top side view.

    Kicker 46L7T12 : 600W 12" Thin Subwoofer Driver, 2Ω or 4Ω DVC

    Pre-Order Today!

    12-Inch Thin Subwoofer Driver, 600-Watt RMS, 2-Ohm or 4-Ohm Dual-Voice-Coil The Kicker Solo-Baric® L7T square subwoofer delivers more bass than a round driver, giving you up to 20% more cone area than a round sub while fitting where only a thin driver will do. Match any L7T thin sub with a KX-Series mono amplifier for an outstanding combination of power and size. Uses a sealed or ported enclosure Square sub design moves 20% more air than round subwoofers Easily mounts under or behind a deat Dual voice coil design Ribbed santoprene surround resists heat And degrading Bumped top plate for more excursion & smoother performance SoloKon™ cone with 360-degree back bracing UniPlate™ solid pole pPiece & backplate for excellent heat dissipation Durable steel basket Specifications Size (IN.,CM) 12, 30 Impedance (OHMS) 2 or 4 DVC Recommended Amplifier Power (watts RMS) 600 Peak Power (watts, per ANSI/CTA-2031-A) 1200 Sensitivity (dB 1w/1m) 86.54 Frequency Response (Hz) 25-100 Mounting Depth (IN.,CM) 4-1/8, 9.5 Mounting Cutout, Square (IN.,CM) 11-1/16, 28.1 Min Rec Sealed Box Volume (CU. FT., Liters) .55, 15.6 Max Rec Sealed Box Volume (CU. FT., Liters) 1.25, 35.4 Min Rec Vented Box Volume (CU. Ft., Liters)** 1.75, 49.6 Max Rec Vented Box Volume (CU. Ft., Liters)** 2.25, 63.7 Kicker L7T Subwoofer Manual

    Pre-Order Today!

    $299.99

  • 600W 10" Subwoofer Driver, 4Ω Dual Voice Coil : JL Audio 10W6v3, shown with grille. JL Audio 10W6v3 : 10-inch 600-Watt Subwoofer Driver, 4-Ohm DVC

    JL Audio 10W6v3 : 600W 10" Subwoofer Driver, 4Ω Dual Voice Coil

    Pre-Order Today!

    W6-Series 10-Inch 600-Watt Subwoofer Driver, 4-Ohm DVC The 10W6v3 subwoofer driver offers several technologies similar to JL Audio's W7AE top line of subwoofers to provide powerful advantages in motor linearity and suspension behavior. This 10" automotive sub has a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance. This 10" W6v3 driver is best used with an amplifier in the 200W - 600W RMS range and is optimized to operate in a sealed enclosure with only 0.55 cu. ft. (15.6 l) of air space, or a 0.75 cu. ft. (21.2 l) ported enclosure. The JL Audio 10W6V3-D4 subwoofer driver comes with Dual 4Ω voice coils that allow the 10W6v3 to be installed in a 2Ω or 8Ω configuration. General Specifications Continuous Power Handling 600W RMS Recommended Amplifier Power 200 - 600W RMS Nominal Impedance Dual 4Ω JL Audio 10W6v3 Manual

    Pre-Order Today!

    $799.99

  • JL Audio 12W6v3 : 12-Inch 600-Watt Subwoofer Driver, 4-Ohm DVC 600W 12" Subwoofer Driver, 4Ω Dual Voice Coil : JL Audio 12W6v3, top side view.

    JL Audio 12W6v3 : 600W 12" Subwoofer Driver, 4Ω Dual Voice Coil

    Pre-Order Today!

    W6-Series 12-Inch 600-Watt Subwoofer Driver, 4-Ohm DVC The 12" W6v3 subwoofer driver is an audiophile subwoofer that offers powerful advantages in motor linearity and suspension behavior. The 12W6v3 sub offers a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance. The JL 12W6v3-4 automotive sub is best used with an amplifier in the 200-Watt - 600-Watt RMS range and is optimized to operate in a sealed enclosure with only 1.0 cu. ft. (28.3 l) of air space, or a 1.3 cu. ft (36.8 l) ported enclosure. Greater excursion capability and higher power handling distinguish the 12" JL W6v3 subwoofer from the 12W3v3 12-inch subwoofer driver, allowing for higher output. Dual 4Ω voice coils allow the W6v3 to be wired in a 2Ω or 8Ω configuration. General Specifications Continuous Power Handling 600W RMS Recommended Amplifier Power 200W - 600W RMS Nominal Impedance Dual 4Ω JL Audio 12W6v3 Manual

    Pre-Order Today!

    $899.99

  • 600W 12" Square Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 45L7R12 600W 12" Square Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 45L7R12 side view.

    Kicker 45L7R12 : 600W 12" Square Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil

    Pre-Order Today!

    12-Inch 600-Watt Square Subwoofer Driver, 2-Ohm or 4-Ohm DVC This L7 series 12" square woofer by Kicker hosts a heavy-duty motor structure that includes a large-diameter spider for less flex, longer life and superior accuracy. On board the chassis of this 600W driver you will find dual high-temp voice coils, an injection-molded polypropylene cone, SoloKon™ 360-degree back bracing, ribbed santoprene surround with blue stitching and a UniPlate™ back plate and pole piece, plus perimeter venting for thermal heat management. The Kicker 45L7R122 and 45L7R124 square subwoofers are rated for 600W of RMS amplified power. Specifications SIZE [in, cm]: 12, 30 IMPEDANCE [Ohms]: 2 or 4 DVC Recommended Amplifier Power (watts RMS) 600 Peak Power (watts, per ANSI/CTA-2031-A) 1200 SENSITIVITY [dB 1w/1m]: 86.7 MOUNTING DEPTH [in, cm]: 6 7/8, 17.4 MOUNTING DIAMETER [in, cm]: 11 1/16, 28.1 MIN SEALED BOX VOL [cu. ft, L]: .88, 24.92 MAX SEALED BOX VOL [cu. ft, L]: 2, 56.64 MIN VENTED BOX VOL [cu. ft, L]: 1.75, 49.6 MAX VENTED BOX VOL [cu. ft, L]: 3.25, 92 Kicker L7R Subwoofer Manual

    Pre-Order Today!

    $2,249.99

Login

Forgot your password?

Don't have an account yet?
Create account