RadioPRO Radio Replacement Interface Harness for Select 2013-2018 Mercedes Sprinter and Metris Vehicles
The RP4.2-MB11 radio replacement interface is your plug-n-play solution to upgrade your factory radio with an aftermarket radio in Mercedes Sprinter or Metris vehicles.
Steering wheel controls, 3.5mm AUX input, USB port and the back-up camera function are all retained with the RP4.2-MB11. By adding on the PAC VS41, you have the ability to add front and blind-spot cameras creating a complete camera system. PAC quality and engineering provides you the most professional installation solution available!
Retains:
Steering wheel controls
3.5mm AUX input
USB port
Back-up camera function
Features:
Includes wired outputs for navigation radio installation
Rear camera activation while in motion
10 Amp ACC 12 volt output
Direct USB updatable
Camera system ready - requires PAC VS41
Includes:
Vehicle specific harness
Interface module
Installation instructions
Applications
Sprinters with the radio delete option need the RP4.2-MB21 harness
2016
MERCEDES-BENZ
METRIS
2013-2018
MERCEDES-BENZ
SPRINTER
Pac Audio RP4.2-MB11 ManualPac Audio RP4.2-MB11 Technical Bulletin
Non-Amplified Head-Unit Replacement Wiring-Harness Adapter for Select 1994-UP Land Rover, Mercedes, Porsche, Chrysler, Dodge, Ford and Freightliner Vehicles
Wiring harness for fast and easy radio installation
Plugs into the car’s original radio connectors on one side
Color-coded wires on the other side are connected to the aftermarket radio
No wire cutting needed for factory radio connectors
Provides electrical power to the radio for a four-speaker connection
Non-Amplified Applications
CHRYSLER
Crossfire
2004-2006
DODGE
Sprinter
2003-2006
FORD
Focus
2003-2004
FREIGHTLINER
Sprinter
2003-2006
LAND ROVER
Discovery
1994-2004
Discovery 2
2000-2004
MERCEDES
C-Class
1994-2000
CL-Class
2000-2002
CLK-Class (320, 430)
1998-2003
E-Class
1994-2002
G-Class
2002-2006
ML-Class
1998-2005
SL-Class
1994-2004
SLK-Class
1998-2004
SLR-Class (McLaren)
2005-2008
Sprinter
2010-2017
PORSCHE
911 (996)
1994.5-2005
Boxter (986)
1997-2004
Non-Amplified Head-Unit Replacement Wiring-Harness Adapter for Select 2019-UP Sprinter Vans With Base Radio (No Touchscreen)
Make installing an aftermarket radio easier with these harnesses
For use with 2019-2021 Sprinters equipped with non-MBUX radios (base radio)
Full kit includes plug-and-play solutions to integrate factory radio harness with aftermarket radio, and OEM Antenna (with amplification), relocates OEM rearview camera to aftermarket radio screen, SOS mic bypass, and supply IGN power from fuse box
Seamless integration using OEM connectors – no cutting or soldering factory wires required
Retains SOS system (Audio only) and avoid errors on the dash
Interfaces with retained accessory power circuit (allows radio to stay after ignition is off until door is opened)
Provides electrical power to the radio for a four-speaker connection
Applications
MERCEDES
Sprinter
2019-2024
Amplified Head-Unit Replacement Wiring-Harness Interface for Select 2005-2011 Mercedes-Benz E-Class, SLK, ML and GL Vehicles
*There are two different radio possibilities for this year range of vehicle, please see below for ways to distinguish between which interface kit you will need.
*Vehicles equipped with Command NTG1 will use the AXDIS-MB132. NTG1 radios will be built by Harman/Becker and have the 6-Disc Changer separate from the radio, if equipped with a SINGLE-disc player, it will be built in to the radio. They will typically have buttons on the sides of, and below the radio screen, also the optical light will come from the fiber cable when removed.
*Vehicles equipped with Command NTG2.5 will use the AXDIS-MB82. NTG2.5 radios will be built by Alpine, and have the 6-Disc changer built in to the radio. They will not have buttons directly below the radio screen, and the optical light will come from the radio when the fiber cable is removed.
Applications
MERCEDES
E-Class
2009
GL-Class
2007-2012
ML-Class
2006-2011
SLK-Class
2005-2011
Axxess Interface AXDIS-MB82 Manual
Amplified Head-Unit Replacement Wiring-Harness Adapter for Select 2003-2011 Mercedes CLS, E and SLK Class Vehicles
Provides accessory power
Designed for amplified models
Provides NAV outputs (parking brake, reverse, speed sense)
Retains audio controls on the steering wheel
Retains balance
Micro B USB updatable
Amplified Applications
MERCEDES
CLS-Class
2006-2011
E-Class
2003-2008
Axxess Interface AXDIS-MB132 Installation ManualAxxess Interface AXDIS-MB132 Can Hub Tech Tip
