At this present time our store location is open by appointment only.

Digital Out

Automotive Amplifiers and Electronics with an Optical Audio Output

Automotive Amplifiers and Electronics with an Optical Audio Output

11 products

  • Sale -$39.01Last One! Pac Audio AP4-CH21 : Amplifier Add-On Interface Adapter, 2007-2018 Chrysler Dodge Jeep RAM

    Pac Audio AP4-CH21 : Amplifier Add-On Interface Adapter, 2007-2018 Chrysler Dodge Jeep RAM

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2007-2018 Amplified Chrysler, Dodge, Jeep and RAM Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features. Benefits Simplifies amplifier installation It prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it, thanks to the original amplifier's retention. Enables the addition of a subwoofer system to the original sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid and treble center frequency selection Retains uConnect, Bluetooth audio, and all warning chimes Plug & play installation Sublevel controller Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module 22-pin harness (MS-CAN) Bass knob Knob harness Manual Also available for fast, easy install: APH-CH01 harness (sold separately) Applications This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer. CHRYSLER TOWN & COUNTRY ALL TRIM LEVELS 2008-2016 DODGE CHALLENGER ALL TRIM LEVELS 2008-2014 CHARGER ALL TRIM LEVELS 2008-2010 DURANGO ALL TRIM LEVELS 2009, 2011-2013 GRAND CARAVAN ALL TRIM LEVELS 2008-2018 RAM TRUCK ALL TRIM LEVELS 2009-2012 JEEP GRAND CHEROKEE ALL TRIM LEVELS 2008-2013 WRANGLER ALL TRIM LEVELS 2007-2017 WRANGLER JK 2018 WRANGLER UNLIMITED ALL TRIM LEVELS 2007-2017 WRANGLER UNLIMITED JK 2018 RAM RAM TRUCK ALL TRIM LEVELS 2010-2012 Pac Audio AP4-CH21 Manual

    1 Available for pickup

    $379.00$339.99

  • Sale -$39.01 Pac Audio AP4-CH31 : Amplifier Add-On Interface Adapter, 2011-2016 Chrysler Dodge Jeep RAM

    Pac Audio AP4-CH31 : Amplifier Add-On Interface Adapter, 2011-2016 Chrysler Dodge Jeep RAM

    Pre-Order Today!

    Add-On Amplifier OEM Integration Interface for Select 2011-2016 Amplified Chrysler, Dodge and Maserati Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features. Benefits Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Enables the addition of a subwoofer system to the original sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid and treble center frequency selection Retains uConnect, Bluetooth audio, and all warning chimes Plug & play installation Sublevel controller Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module 22-pin harness (Dual MS-CAN) Bass knob Knob harness Manual Also available for fast, easy install: APH-CH01 harness (sold separately) Applications This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer. CHRYSLER 300 ALL TRIM LEVELS 2011-2014 DODGE CHARGER ALL TRIM LEVELS 2011-2014 JOURNEY ALL TRIM LEVELS 2011-2015 MASERATI GHIBLI ALL TRIM LEVELS 2015 QUATTROPORTE ALL TRIM LEVELS 2014-2016 Pac Audio AP4-CH31 Manual

    Pre-Order Today!

    $379.00$339.99

  • Sale -$49.01Last One! Pac Audio AP4-CH41 R.2 : Amplifier Add-On Interface Adapter, 2013-UP Chrysler Dodge Jeep RAM

    Pac Audio AP4-CH41 R.2 : Amplifier Add-On Interface Adapter, 2013-UP Chrysler Dodge Jeep RAM

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2013-UP Chrysler, Dodge, Jeep, Maserati and RAM Vehicles This latest version of the Pac-Audio AmpPRO simplifies the installation of upgraded amplifiers in select non-amplified and amplified sound systems  With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features. Benefits Simplifies amplifier installation Prevents need for summing and DSP devices Provides factory sound system upgrade solution Provides flat audio output for a solid audio foundation Features Can be used to upgrade the entire sound system or just part of it thanks to retention of the original amplifier Enables the addition of a subwoofer to an amplified sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Customized OE bass, mid and treble center frequency selection Retains uConnect, Bluetooth audio, Navigation prompts, and all warning chimes Plug-n-Play installation Sub level controller Optional TOSLINK optical output (APA-TOS1 sold separately)  Includes AmpPRO module 52-pin harness (MS-CAN) Bass knob with harness Manual Also available for fast, easy install: APH-CH01 harness (sold separately) Select non-amplified vehicles are equipped with an ANC system that requires bypass.  Plug-n-Play bypass harness: ANC-CH01  Applications Compatible with both amplified and non-amplified factory systems. Jeep Cherokee, Chrysler 200, and Maserati: These vehicles must be equipped with a factory amplifier as the AP4 cannot reprogram the factory radio to think that an amplifier is present. When installing into any of the following vehicles, the APHCH42 is required (sold separately): CHRYSLER 200 ALL TRIM LEVELS 2015-2017 300 ALL TRIM LEVELS 2015-2022 PACIFICA ALL TRIM LEVELS 2017-2022 DODGE CHALLENGER ALL TRIM LEVELS 2015-2022 CHARGER ALL TRIM LEVELS 2015-2022 DURANGO ALL TRIM LEVELS 2014-2020 DURANGO ALL TRIM LEVELS w/10.1" Screen 2021 DURANGO ALL TRIM LEVELS w/8.4" Screen 2021 RAM TRUCK ALL TRIM LEVELS 2013-2021 RAM TRUCK NON-CLASSIC 2022 JEEP CHEROKEE ALL TRIM LEVELS 2015-2021 GLADIATOR ALL TRIM LEVELS 2020-2022 GRAND CHEROKEE ALL TRIM LEVELS 2014-2020 GRAND CHEROKEE WK 2021-2023 WRANGLER JL 2018-2023 WRANGLER 4XE 2021-2022 WRANGLER ALL TRIM LEVELS 2024 WRANGLER UNLIMITED JL 2018-2023 WRANGLER UNLIMITED ALL TRIM LEVELS 2024 MASERATI LEVANTE ALL TRIM LEVELS 2018 QUATTROPORTE ALL TRIM LEVELS 2017 RAM RAM TRUCK ALL TRIM LEVELS 2013-2021 RAM TRUCK NON-CLASSIC 2022 Pac Audio AP4-CH41 R.2 ManualPac Audio AP4-CH41 ANC and Amplifier LocationsPac Audio AP4-CH41 R.2 Technical Bulletin

    1 Available for pickup

    $379.00$329.99

  • Sale -$49.01 Pac Audio AP4-FD11 : Amplifier Add-On Interface Adapter, 2007-2014 Ford Lincoln

    Pac Audio AP4-FD11 : Amplifier Add-On Interface Adapter, 2007-2014 Ford Lincoln

    Pre-Order Today!

    Add-On Amplifier OEM Integration Interface for Select 2007-2014 Amplified Ford and Lincoln Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features. Benefits Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Enables the addition of a subwoofer system to the original sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid and treble center frequency selection Retains Sync, Bluetooth audio, and all warning chimes Plug & play installation Sublevel controller Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module 24-pin (MS-CAN) Bass knob Knob harness Manual Also available for fast, easy install: APH-FD01 harness (sold separately) Applications This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system. If you are unsure of your vehicle having an amplified system, please contact an authorized Ford service center for further clarification. FORD F-150 ALL TRIM LEVELS 2009-2012 FLEX ALL TRIM LEVELS 2009-2012 FUSION ALL TRIM LEVELS 2010-2012 TAURUS ALL TRIM LEVELS 2010-2012 LINCOLN MKS ALL TRIM LEVELS 2009-2012 MKT ALL TRIM LEVELS 2010-2012 MKX ALL TRIM LEVELS 2007-2010 MKZ ALL TRIM LEVELS 2007-2012 NAVIGATOR ALL TRIM LEVELS 2007-2014 Pac Audio AP4-FD11 Manual

    Pre-Order Today!

    $379.00$329.99

  • Sale -$54.01 Pac Audio AP4-FD21 : Amplifier Add-On Interface Adapter, 2011-2020 Ford

    Pac Audio AP4-FD21 : Amplifier Add-On Interface Adapter, 2011-2020 Ford (Amplified)

    Pre-Order Today!

    Add-On Amplifier OEM Integration Interface for Select 2011-2020 Amplified Ford and Lincoln Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features. Benefits Simplifies amplifier installation Prevents need for summing and DSP devices Provides factory sound system upgrade solution Features Can be used to upgrade the entire sound system or just part of it thanks to retention of original amplifier Enables the addition of a subwoofer system to the original sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid and treble center frequency selection Retains Sync, Bluetooth audio and all warning chimes Plug & play installation Sub level controller Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module 24-pin and 54-pin harness (MS CAN) (Dual MS CAN) Bass knob Knob harness Manual Also available for fast easy install: APH-FD01 harness (sold separately) Applications This product is compatible with data-bus controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers or the subwoofer to confirm that the vehicle has a compatible amplified system. If you are unsure of your vehicle having an amplified system please contact an authorized Ford service center for further clarification. 2018-2019 Super Duty Trucks can have either Sony or B&O systems to be compatible. 2019+ Mustang must have B&O System to be compatible. If the amp looks like the one pictured, it is compatible. The amp can be found in the driver's kick panel. If the system is amplified and not badged then the AP4 is not compatible as this is a completely analog system.  FORD EDGE ALL TRIM LEVELS 2015-2017 ESCAPE ALL TRIM LEVELS 2016 EXPEDITION ALL TRIM LEVELS 2015-2017 EXPLORER ALL TRIM LEVELS 2011-2018 F-150 ALL TRIM LEVELS 2013-2017 F-250 ALL TRIM LEVELS 2013-2019 F-350 ALL TRIM LEVELS 2013-2019 F-450 ALL TRIM LEVELS 2013-2019 F-550 ALL TRIM LEVELS 2013-2019 FOCUS ALL TRIM LEVELS 2012-2017 FUSION ALL TRIM LEVELS 2013-2016 MUSTANG ALL TRIM LEVELS 2019-2020 TAURUS ALL TRIM LEVELS 2013-2015 Pac Audio AP4-FD21 Manual

    Pre-Order Today!

    $379.00$324.99

  • Sale -$59.01 Pac Audio AP4-FD31 : Amplifier Add-On Interface Adapter, 2018-UP Ford (Amplified)

    Pac Audio AP4-FD31 : Amplifier Add-On Interface Adapter, 2018-UP Ford (Amplified)

    Pre-Order Today!

    Add-On Amplifier OEM Integration Interface for Select 2018-UP Amplified Ford  Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features. Benefits Simplifies amplifier installation Prevents need for summing and DSP devices Provides factory sound system upgrade solution Features Simplifies amplifier installation in data-bus controlled factory sound systems Provides variable volume, control, fade, balance, bass, mid, and treble audio settings Retains warning chimes, navigation prompts, Bluetooth®, and telematics audio (if equipped) Front, rear, and sub preamp outputs (5V RMS) Plug-and-play installation with factory-matched harness Sub level controller included Optical output included Applications Vehicle must be equipped with factory B&O system to be compatible Factory amplifier must be removed from vehicle when installing this interface FORD BRONCO ALL TRIM LEVELS 2021-2023 BRONCO SPORT ALL TRIM LEVELS 2021 ECO SPORT ALL TRIM LEVELS 2021 EDGE ALL TRIM LEVELS 2019-2022 ESCAPE ALL TRIM LEVELS 2021-2022 EXPEDITION ALL TRIM LEVELS 2018-2020 EXPLORER ALL TRIM LEVELS 2020-2023 F-150 ALL TRIM LEVELS 2018-2023 F-250 ALL TRIM LEVELS 2020-2023 F-350 ALL TRIM LEVELS 2020-2023 F-450 ALL TRIM LEVELS 2020 LIGHTNING ALL TRIM LEVELS 2022 MAVERICK ALL TRIM LEVELS 2022 MUSTANG MACH E ALL TRIM LEVELS 2021 RANGER ALL TRIM LEVELS 2020-2023 Pac Audio AP4-FD31 Manual

    Pre-Order Today!

    $489.00$429.99

  • Pac Audio AP4-GM61 : Amplifier Add-On Interface Adapter, 2014-2019 Cadillac Chevy GMC.

    Pac Audio AP4-GM61 : Amplifier Add-On Interface Adapter, 2014-2019 Cadillac Chevy GMC (Amplified)

    Pre-Order Today!

    Add-On Amplifier OEM Integration Interface for Select 2014-2019 Amplified Cadillac, Chevy and GMC  Vehicles Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time! Benefits Factory sound system upgrade Time-saving design Prevents the need for summing and audio correction devices Reliable PAC quality Features Upgrade solution for factory, fixed level, data-bus controlled sound systems The time-saving design prevents the need for summing and audio correction devices. Variable volume, fade, balance, bass, mid, and treble audio settings Retains OnStar, Bluetooth, navigation, safety systems, and all warning chimes Front, rear, sub, and center channel preamp outputs (5 volt RMS) Provides full range, flat audio output for a solid audio foundation Customized OE bass, mid, and treble center frequency selection Plug-n-play installation Remote sub level controller INCLUDED Optional TOSLINK optical output with APA-TOS1 (sold separately) Includes AmpPRO module Harness Bass knob Knob harness Manual Also available for fast, easy install: APH-GM02 harness (sold separately) Applications Must have BOSE factory sound system. Must have Infotainment system RPO code IO5 or IO6 to be compatible. To verify the "IO" RPO code on your vehicle, check the glove compartment or spare tire well for a silver sticker with these codes. If this sticker is not present, you must scan the QR code on the GM label found in the driver's door jamb. The RPO codes will be listed in alphabetical order in either scenario. CADILLAC ATS ALL TRIM LEVELS 2015 CT6 ALL TRIM LEVELS 2017 ESCALADE ALL TRIM LEVELS 2015-2019 CHEVEROLET CAMARO ALL TRIM LEVELS 2016-2018 COLORADO ALL TRIM LEVELS 2015-2018 CORVETTE ALL TRIM LEVELS 2014-2019 CRUZE ALL TRIM LEVELS 2017-2018 EQUINOX ALL TRIM LEVELS 2018 IMPALA NON-CLASSIC 2014-2016 IMPALA ALL TRIM LEVELS 2017-2019 MALIBU NON-CLASSIC 2016 MALIBU ALL TRIM LEVELS 2017-2018 SILVERADO ALL TRIM LEVELS 2014-2018 SILVERADO CLASSIC 2019 SILVERADO HD ALL TRIM LEVELS 2015-2019 SUBURBAN ALL TRIM LEVELS 2015-2019 TAHOE ALL TRIM LEVELS 2015-2019 TRAVERSE ALL TRIM LEVELS 2018-2019 VOLT ALL TRIM LEVELS 2016-2018 GMC ACADIA ALL TRIM LEVELS 2018-2019 CANYON ALL TRIM LEVELS 2015-2018 SIERRA ALL TRIM LEVELS 2014-2018 SIERRA HD ALL TRIM LEVELS 2015-2019 TERRAIN ALL TRIM LEVELS 2018 YUKON ALL TRIM LEVELS 2015-2019 YUKON XL ALL TRIM LEVELS 2015-2019 Pac Audio AP4-GM61 ManualPac Audio AP3-GM61 Radio Locations

    Pre-Order Today!

    $429.99

  • Sale -$54.01 Pac Audio AP4-TY11 : Amplifier Add-On Interface Adapter, 2002-2015 Lexus Toyota

    Pac Audio AP4-TY11 : Amplifier Add-On Interface Adapter, 2002-2015 Lexus Toyota (Amplified)

    Pre-Order Today!

    Add-On Amplifier OEM Integration Interface for Select 2002-2015 Amplified Lexus and Toyota Vehicles Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time! Benefits Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Enables the addition of a subwoofer system to the original sound system Upgrade solution for factory, fixed level, data-bus controlled sound systems Everything you need in one box to install your choice of aftermarket amplifier(s) The time-saving design prevents the need for summing and audio correction devices. Variable volume, fade, balance, bass, mid, and treble audio settings Retains Bluetooth, navigation, safety system, and all warning chimes Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid, and treble center frequency selection Plug-n-play installation with two 20-pin connectors (IE Bus) Remote sub level controller included Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module Harness (IE Bus) Bass knob Knob harness Manual Applications Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. See manual for details. Toyota vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital. Lexus vehicles must be equipped with a center channel and a subwoofer in order for the AP4-TY11 to be compatible: Between 2012-2015 Toyota used two different styles of connectors. In order for the AP4-TY11 to be compatible, the radio must have the 20-pin BHA8113 style connector. Vehicles equipped with the 10 / 6-pin BHA1761 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference LEXUS CT 200H ALL TRIM LEVELS For AmpPRO: Without Navigation 2011-2013 ES 300 ALL TRIM LEVELS For AmpPRO: With Double DIN Radio 2002-2003 ES 300H ALL TRIM LEVELS For AmpPRO: Without Navigation 2013-2014 ES 330 ALL TRIM LEVELS For AmpPRO: With Double DIN Radio 2004-2006 ES 350 ALL TRIM LEVELS — 2007-2009 ES 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2014 GX 460 ALL TRIM LEVELS For AmpPRO: Without Navigation 2009-2013 GX 470 ALL TRIM LEVELS — 2004-2009 HS 250H ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2012 IS 250 ALL TRIM LEVELS — 2006-2009 IS 250 ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2013 IS 350 ALL TRIM LEVELS — 2006-2009 IS 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2013 IS F ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2012 LS 430 ALL TRIM LEVELS — 2001-2006 RX 330 ALL TRIM LEVELS — 2004-2006 RX 350 ALL TRIM LEVELS — 2007-2009 RX 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2015 RX 400H ALL TRIM LEVELS — 2006-2008 RX 450H ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2015 TOYOTA 4RUNNER ALL TRIM LEVELS — 2003-2013 AVALON ALL TRIM LEVELS — 2005-2012 AVALON ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2013-2014 CAMRY ALL TRIM LEVELS — 2007-2011 CAMRY ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2012-2014 COROLLA ALL TRIM LEVELS — 2005-2011 FJ CRUISER ALL TRIM LEVELS — 2011-2014 HIGHLANDER ALL TRIM LEVELS — 2008-2013 LAND CRUISER ALL TRIM LEVELS — 2008 PRIUS ALL TRIM LEVELS — 2004-2011 PRIUS ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2012-2015 RAV4 ALL TRIM LEVELS — 2004-2013 RAV4 ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2014 SEQUOIA ALL TRIM LEVELS — 2005-2012 SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style radio harness 2013 SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2014 SIENNA ALL TRIM LEVELS — 2004-2014 TACOMA ALL TRIM LEVELS — 2005-2013 TUNDRA ALL TRIM LEVELS — 2005-2013 VENZA ALL TRIM LEVELS — 2009-2012 VENZA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2013-2014 Pac Audio AP4-TY11 Manual

    Pre-Order Today!

    $379.00$324.99

  • Sale -$54.01 Pac Audio AP4-TY12 : Amplifier Add-On Interface Adapter, 2012-2019 Lexus Toyota

    Pac Audio AP4-TY12 : Amplifier Add-On Interface Adapter, 2012-2019 Lexus Toyota (Amplified)

    Pre-Order Today!

    Add-On Amplifier OEM Integration Interface for Select 2012-2019 Amplified Lexus and Toyota Vehicles Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time! Benefits Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Enables the addition of a subwoofer system to the original sound system Upgrade solution for factory, fixed level, data-bus controlled sound systems Everything you need in one box to install your choice of aftermarket amplifier(s) The time-saving design prevents the need for summing and audio correction devices. Variable volume, fade, balance, bass, mid, and treble audio settings Retains Bluetooth, navigation, safety system, and all warning chimes Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid, and treble center frequency selection Plug-n-play installation with two 20-pin connectors (IE Bus) Remote sub level controller included Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module Harness (IE Bus) Bass knob Knob harness Manual Applications Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. See manual for details. Vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital. Lexus vehicles equipped with the Mark Levinson system are not compatible. Lexus vehicles equipped with navigation are not compatible. Lexus CT200h: Must be equipped with a center channel and a subwoofer Between 2012-2015 Toyota used two different styles of connectors. In order for the AP4-TY12 to be compatible, the radio must have the 10 / 6-pin BHA1761 style connector. Vehicles equipped with the 20-pin BHA8113 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference.   LEXUS CT 200H ALL TRIM LEVELS For AmpPRO: Without Navigation 2014-2017 ES 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 GX 460 ALL TRIM LEVELS For AmpPRO: Without Navigation 2014-2017 IS 200T ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 IS 250 ALL TRIM LEVELS For AmpPRO: Without Navigation 2014-2015 IS 300 ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 NX 200T ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 NX 300H ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 RC 200T ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 RC 300 ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 RC 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 RX 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 TOYOTA 4RUNNER ALL TRIM LEVELS — 2014-2018 AVALON ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2013-2014 AVALON ALL TRIM LEVELS — 2015-2018 CAMRY ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2012-2014 CAMRY ALL TRIM LEVELS — 2015-2017 HIGHLANDER ALL TRIM LEVELS — 2014-2018 PRIUS ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2012-2015 PRIUS ALL TRIM LEVELS — 2016-2017 RAV4 ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2014 RAV4 ALL TRIM LEVELS — 2015-2018 SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness 2013 SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2014 SEQUOIA ALL TRIM LEVELS — 2015-2018 SIENNA ALL TRIM LEVELS — 2015-2017 TACOMA ALL TRIM LEVELS — 2014-2018 TUNDRA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness 2014-2015 TUNDRA ALL TRIM LEVELS — 2016-2019 VENZA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2013-2014 VENZA ALL TRIM LEVELS — 2015-2016 Pac Audio AP4-TY12 ManualPac Audio AP4-TY12 Technical Bulletin

    Pre-Order Today!

    $379.00$324.99

  • Pac Audio AP4-TY13 (R.2) : Amplifier Add-On Interface Adapter, 2018-2021 Lexus Toyota

    Pac Audio AP4-TY13 (R.2) : Amplifier Add-On Interface Adapter, 2018-2021 Lexus Toyota (Amplified)

    Pre-Order Today!

    Add-On Amplifier OEM Integration Interface for Select 2018-2021 Amplified Lexus and Toyota Vehicles Quickly and seamlessly add aftermarket amplifier(s) for improved audio performance while retaining the factory radio. AmpPRO is a Plug-n-Play solution that plugs into the factory radio harness and provides Front/Rear/Sub RCA outputs (5 Volt RMS) to connect to your aftermarket amplifiers. The AmpPRO design avoids the disappointing results and hassle of interfacing after the factory amplifier.  The harness connects to the radio for easier installation. Provides variable volume, fade, and balance Provides bass, mid and treble audio settings Retains warning chimes and navigation prompts Retains Bluetooth and telematic audio (if equipped) Front/Rear/Sub RCA outputs (5 Volt RMS) Includes sub level controller Optional TOSLINK optical output (APA-TOS1) sold separately. Optional speaker connection harness (APH-TY02) sold separately. Applications Lexus ES250, ES350, and NX300: Only compatible in models equipped with the 8" screen Lexus RX350 and RX450: Not compatible in models equipped with navigation In 2018+ models Toyota used three different styles of connectors on the factory radios. In order for the AP4-TY13 to be compatible, the radio must have the 28 / 10-pin new Toyota style connector. Vehicles equipped with the 20-pin BHA8113  or the 10 / 6 pin BHA1761 style connectors are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference. LEXUS ES 250 ALL TRIM LEVELS 2019-2021 ES 350 ALL TRIM LEVELS 2019-2021 NX 300 ALL TRIM LEVELS 2019-2021 RX 350 ALL TRIM LEVELS 2019-2021 RX 450H ALL TRIM LEVELS 2019-2020 TOYOTA 4RUNNER ALL TRIM LEVELS 2019-2020 AVALON ALL TRIM LEVELS 2019-2021 CAMRY ALL TRIM LEVELS 2018-2021 COROLLA ALL TRIM LEVELS 2019 HIGHLANDER ALL TRIM LEVELS 2020-2021 RAV4 ALL TRIM LEVELS 2019-2020 SEQUOIA ALL TRIM LEVELS 2019-2021 SIENNA ALL TRIM LEVELS 2018-2020 TACOMA ALL TRIM LEVELS 2019-2021 TUNDRA ALL TRIM LEVELS 2020-2021 Pac Audio AP4-TY13 (R.2) Manual

    Pre-Order Today!

    $324.99

  • Pac Audio APA-TOS1 : AmpPro Toslink Fiber-Optic Audio Output Pac Audio APA-TOS1 : AmpPro Toslink Fiber-Optic Audio Output, bottom side.

    Pac Audio APA-TOS1 : AmpPro Toslink Fiber-Optic Audio Output

    2 Available for pickup

    Add-On Fiber Optic Output for Select Pac-Audio AmpPro Interfaces The APA-TOS1 is a fiber-optic audio output add-on accessory for use with an AmpPRO interface. The APA-TOS1 easily installs in your AmpPRO interface and instantly provides a digital Toslink output. APA-TOS1 is compatible with any brand and length of Toslink cable for connection into a Toslink equipped DSP, or amplifier. Benefits APA-TOS1 provides a pure digital output for aftermarket amplifier and/or DSP installationDigital audio signals are less susceptible to noise/hiss or interference Features Quick and easy installation into any AmpPRO interfaceProvides digital fiber-optic variable audio signal outputCompatible with Toslink equipped DSPs or amplifiers NOTE: Toslink cable is not included Pac Audio AP4-TOS1 Manual

    2 Available for pickup

    $59.99

Login

Forgot your password?

Don't have an account yet?
Create account