Digital Out

Add-On Amplifier OEM Integration Interface for Select 2002-2015 Amplified Lexus and Toyota Vehicles Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time! Benefits Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Enables the addition of a subwoofer system to the original sound system Upgrade solution for factory, fixed level, data-bus controlled sound systems Everything you need in one box to install your choice of aftermarket amplifier(s) The time-saving design prevents the need for summing and audio correction devices. Variable volume, fade, balance, bass, mid, and treble audio settings Retains Bluetooth, navigation, safety system, and all warning chimes Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid, and treble center frequency selection Plug-n-play installation with two 20-pin connectors (IE Bus) Remote sub level controller included Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module Harness (IE Bus) Bass knob Knob harness Manual Applications Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. See manual for details. Toyota vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital. Lexus vehicles must be equipped with a center channel and a subwoofer in order for the AP4-TY11 to be compatible: Between 2012-2015 Toyota used two different styles of connectors. In order for the AP4-TY11 to be compatible, the radio must have the 20-pin BHA8113 style connector. Vehicles equipped with the 10 / 6-pin BHA1761 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference LEXUS CT 200H ALL TRIM LEVELS For AmpPRO: Without Navigation 2011-2013 ES 300 ALL TRIM LEVELS For AmpPRO: With Double DIN Radio 2002-2003 ES 300H ALL TRIM LEVELS For AmpPRO: Without Navigation 2013-2014 ES 330 ALL TRIM LEVELS For AmpPRO: With Double DIN Radio 2004-2006 ES 350 ALL TRIM LEVELS — 2007-2009 ES 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2014 GX 460 ALL TRIM LEVELS For AmpPRO: Without Navigation 2009-2013 GX 470 ALL TRIM LEVELS — 2004-2009 HS 250H ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2012 IS 250 ALL TRIM LEVELS — 2006-2009 IS 250 ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2013 IS 350 ALL TRIM LEVELS — 2006-2009 IS 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2013 IS F ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2012 LS 430 ALL TRIM LEVELS — 2001-2006 RX 330 ALL TRIM LEVELS — 2004-2006 RX 350 ALL TRIM LEVELS — 2007-2009 RX 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2015 RX 400H ALL TRIM LEVELS — 2006-2008 RX 450H ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2015 TOYOTA 4RUNNER ALL TRIM LEVELS — 2003-2013 AVALON ALL TRIM LEVELS — 2005-2012 AVALON ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2013-2014 CAMRY ALL TRIM LEVELS — 2007-2011 CAMRY ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2012-2014 COROLLA ALL TRIM LEVELS — 2005-2011 FJ CRUISER ALL TRIM LEVELS — 2011-2014 HIGHLANDER ALL TRIM LEVELS — 2008-2013 LAND CRUISER ALL TRIM LEVELS — 2008 PRIUS ALL TRIM LEVELS — 2004-2011 PRIUS ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2012-2015 RAV4 ALL TRIM LEVELS — 2004-2013 RAV4 ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2014 SEQUOIA ALL TRIM LEVELS — 2005-2012 SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style radio harness 2013 SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2014 SIENNA ALL TRIM LEVELS — 2004-2014 TACOMA ALL TRIM LEVELS — 2005-2013 TUNDRA ALL TRIM LEVELS — 2005-2013 VENZA ALL TRIM LEVELS — 2009-2012 VENZA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2013-2014 Pac Audio AP4-TY11 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2012-2019 Amplified Lexus and Toyota Vehicles Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time! Benefits Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Enables the addition of a subwoofer system to the original sound system Upgrade solution for factory, fixed level, data-bus controlled sound systems Everything you need in one box to install your choice of aftermarket amplifier(s) The time-saving design prevents the need for summing and audio correction devices. Variable volume, fade, balance, bass, mid, and treble audio settings Retains Bluetooth, navigation, safety system, and all warning chimes Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid, and treble center frequency selection Plug-n-play installation with two 20-pin connectors (IE Bus) Remote sub level controller included Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module Harness (IE Bus) Bass knob Knob harness Manual Applications Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. See manual for details. Vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital. Lexus vehicles equipped with the Mark Levinson system are not compatible. Lexus vehicles equipped with navigation are not compatible. Lexus CT200h: Must be equipped with a center channel and a subwoofer Between 2012-2015 Toyota used two different styles of connectors. In order for the AP4-TY12 to be compatible, the radio must have the 10 / 6-pin BHA1761 style connector. Vehicles equipped with the 20-pin BHA8113 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference.   LEXUS CT 200H ALL TRIM LEVELS For AmpPRO: Without Navigation 2014-2017 ES 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 GX 460 ALL TRIM LEVELS For AmpPRO: Without Navigation 2014-2017 IS 200T ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 IS 250 ALL TRIM LEVELS For AmpPRO: Without Navigation 2014-2015 IS 300 ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 NX 200T ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 NX 300H ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 RC 200T ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 RC 300 ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 RC 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 RX 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 TOYOTA 4RUNNER ALL TRIM LEVELS — 2014-2018 AVALON ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2013-2014 AVALON ALL TRIM LEVELS — 2015-2018 CAMRY ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2012-2014 CAMRY ALL TRIM LEVELS — 2015-2017 HIGHLANDER ALL TRIM LEVELS — 2014-2018 PRIUS ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2012-2015 PRIUS ALL TRIM LEVELS — 2016-2017 RAV4 ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2014 RAV4 ALL TRIM LEVELS — 2015-2018 SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness 2013 SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2014 SEQUOIA ALL TRIM LEVELS — 2015-2018 SIENNA ALL TRIM LEVELS — 2015-2017 TACOMA ALL TRIM LEVELS — 2014-2018 TUNDRA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness 2014-2015 TUNDRA ALL TRIM LEVELS — 2016-2019 VENZA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2013-2014 VENZA ALL TRIM LEVELS — 2015-2016 Pac Audio AP4-TY12 ManualPac Audio AP4-TY12 Technical Bulletin

Read more less

Add-On Amplifier OEM Integration Interface for Select 2018-2021 Amplified Lexus and Toyota Vehicles Quickly and seamlessly add aftermarket amplifier(s) for improved audio performance while retaining the factory radio. AmpPRO is a Plug-n-Play solution that plugs into the factory radio harness and provides Front/Rear/Sub RCA outputs (5 Volt RMS) to connect to your aftermarket amplifiers. The AmpPRO design avoids the disappointing results and hassle of interfacing after the factory amplifier.  The harness connects to the radio for easier installation. Provides variable volume, fade, and balance Provides bass, mid and treble audio settings Retains warning chimes and navigation prompts Retains Bluetooth and telematic audio (if equipped) Front/Rear/Sub RCA outputs (5 Volt RMS) Includes sub level controller Optional TOSLINK optical output (APA-TOS1) sold separately. Optional speaker connection harness (APH-TY02) sold separately. Applications Lexus ES250, ES350, and NX300: Only compatible in models equipped with the 8" screen Lexus RX350 and RX450: Not compatible in models equipped with navigation In 2018+ models Toyota used three different styles of connectors on the factory radios. In order for the AP4-TY13 to be compatible, the radio must have the 28 / 10-pin new Toyota style connector. Vehicles equipped with the 20-pin BHA8113  or the 10 / 6 pin BHA1761 style connectors are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference. LEXUS ES 250 ALL TRIM LEVELS 2019-2021 ES 350 ALL TRIM LEVELS 2019-2021 NX 300 ALL TRIM LEVELS 2019-2021 RX 350 ALL TRIM LEVELS 2019-2021 RX 450H ALL TRIM LEVELS 2019-2020 TOYOTA 4RUNNER ALL TRIM LEVELS 2019-2020 AVALON ALL TRIM LEVELS 2019-2021 CAMRY ALL TRIM LEVELS 2018-2021 COROLLA ALL TRIM LEVELS 2019 HIGHLANDER ALL TRIM LEVELS 2020-2021 RAV4 ALL TRIM LEVELS 2019-2020 SEQUOIA ALL TRIM LEVELS 2019-2021 SIENNA ALL TRIM LEVELS 2018-2020 TACOMA ALL TRIM LEVELS 2019-2021 TUNDRA ALL TRIM LEVELS 2020-2021 Pac Audio AP4-TY13 (R.2) Manual

Read more less