Factory Reverse Camera Wiring-Harness Adapter for Select 2015-2021 Subaru Vehicles
The AXBUCH-SB2 is designed to retain factory back up cameras to be viewed through the aftermarket radio.
Allows retention of the OEM camera to an aftermarket radio
It is highly recommended to use the Pac Volt-39 (sold separately) to provide the camera with the proper 6V DC voltage
Backup Camera Retention Applications
SUBARU
BRZ
With Base Radio, 6.2" Screen
2016-2020
Crosstrek
With Base Radio, 6.2" Screen
2016-2017
Forester
With Base Radio, 6.2" Screen
2017-2018
Impreza
With Base Radio, 6.2" Screen
2015-2016
WRX
With Base Radio, 6.2" Screen
2016-2021
WRX (NAV)
With Base Radio, 6.2" Screen
2015
XV Crosstrek
With Base Radio, 6.2" Screen
2015
Add Camera to Factory Radio Applications
SUBARU
BRZ
With Base Radio, 6.2" Screen
2016-2020
Crosstrek
With Base Radio, 6.2" Screen
2016-2017
Forester
With Base Radio, 6.2" Screen
2017-2018
Impreza
With Base Radio, 6.2" Screen
2015-2016
WRX
With Base Radio, 6.2" Screen
2016-2021
WRX (NAV)
With Base Radio, 6.2" Screen
2015
XV Crosstrek
With Base Radio, 6.2" Screen
2015
Axxess AXBUCH-SB2 Installation Manual
Add-On Amplifier OEM Integration Interface for Select 1985-UP Nissan, Subaru and Suzuki Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-NIS1 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
NISSAN
370z
non-amplified
2009-2020
Altima
non-amplified
2007-2018
ARMADA
non-amplified
2008-2017
Cube
non-amplified
2009-2014
Frontier
non-amplified
2008-2018
Juke
non-amplified
2011-2017
Kicks
non-amplified
2018-Up*
Leaf
non-amplified
2012-2018
Maxima
non-amplified
2007-2016
Murano
non-amplified
2003-2017
Murano (Cabriolet)
non-amplified
2011-2014
NV (1500/2500/3500)
non-amplified
2012-2018
NV 200
non-amplified
2012-2018
Pathfinder
non-amplified
2013-2020
PATHFINDER
non-amplified
2010-2017
Quest
non-amplified
2011-2016
Rogue
non-amplified
2008-2018
Sentra
non-amplified
2007-2019
Titan
non-amplified
2008-2015
Titan/ Titan XD
non-amplified
2017-Up*
Versa
non-amplified
2007-2018
Versa Note
non-amplified
2014-2018
Xterra
non-amplified
2008-2014
SUBARU
Forester
non-amplified
2009-2015
Impreza
non-amplified
2008-2014
IMPREZA WRX
non-amplified
2008-2014
Legacy
non-amplified
2010-2014
Outback
non-amplified
2010-2014
WRX
non-amplified
2012-2021
XT COUPE
non-amplified
1985-1990
XV CROSSTREK
non-amplified
2013-2015
SUZUKI
Equator
non-amplified
2009-2011
Axxess AXLOC-NIS1 Manual
Add-On Amplifier OEM Integration Interface for Select 1980-2021 Scion, Subaru and Toyota Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-TY1 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
SCION
FRS
non-amplified
2013-2016
IQ
non-amplified
2012-2016
TC
non-amplified
2005-2016
XA
non-amplified
2004-2006
XB
non-amplified
2004-2015
XD
non-amplified
2008-2014
SUBARU
BRZ
non-amplified
2013-2020
CROSSTREK
non-amplified
2016-2020
FORESTER
non-amplified
2016-2020
IMPREZA
non-amplified
2015-2018
LEGACY
non-amplified
2015-2017
OUTBACK
non-amplified
2015-2017
WRX
non-amplified
2016-2021
TOYOTA
86
non-amplified
2017-2020
4-Runner
non-amplified
1987-2019
Avalon
non-amplified
1995-2018
C-HR
non-amplified
2018-2018
Camry
non-amplified
1987-2017
Celica
non-amplified
1989-2005
Corolla
non-amplified
1987-2019
Cressida
non-amplified
1987-1992
Echo
non-amplified
2000-2005
FJ Crusier
non-amplified
2007-2014
Highlander
non-amplified
2001-2019
Land Cruiser
non-amplified
1987-2002
Matrix
non-amplified
2005-2013
MR2
non-amplified
1985-1995
MR2 Spyder
non-amplified
2000-2006
Paseo
non-amplified
1992-1997
Pickup
non-amplified
1987-1995
Previa
non-amplified
1991-1997
Prius
non-amplified
2001-2019
Rav 4
non-amplified
1996-2018
Seqoia
non-amplified
2001-2019
Sienna
non-amplified
1996-2017
Solara
non-amplified
1999-2008
Supra
non-amplified
1986-1992
T100
non-amplified
1993-1998
Tacoma
non-amplified
1995-2019
Tercel
non-amplified
1980-1998
Tundra
non-amplified
2000-2019
Van
non-amplified
1987-1990
Venza
non-amplified
2009-2015
Yaris
non-amplified
2007-2017
Axxess AXLOC-TY1 Manual
Head-Unit Replacement Accessory and USB-Retention Cable for Select 2008-2014 Subaru Vehicles
Connects the factory USB port and 3.5mm jack to an aftermarket radio in select Subaru vehicles.
Click here to view vehicle coverage information.
Head-Unit Replacement USB Adapter-Cable for Select 2015-2018 Subaru Vehicles
Connects the factory USB port to an aftermarket radio in select Subaru vehicles.
Click here to view vehicle coverage
Head-Unit Replacement USB Adapter-Cable for Select 2012-2019 Honda, Scion, Subaru and Toyota Vehicles
Connects the factory USB port and cable to a full-size USB male connector in select Toyota vehicles.
Click Here to View Vehicle Coverage
Head-Unit Replacement Accessory and USB-Retention Cable for Select 2012-2020 Honda, Scion, Subaru and Toyota Vehicles
Converts the factory USB port cable into standard full size male USB so it can be plugged into an aftermarket radio.
Click Here to View Vehicle Coverage Information
Aftermarket Head-Unit Replacement Maestro-Module T-harness for Select 2013-2021 Subaru, Scion and Toyota Vehicles
RR and RR2 compatible radio replacement harness for select 2012-2021 Subaru vehicles . The radio side of the harness terminates in a universal connector that can be used in conjunction with available Maestro Head unit adapters for a plug n play solution or removed for conventional connections separately.
Click Here to View Vehicle Coverage Information - confirmed through 2021
Aftermarket Head-Unit Replacement Maestro-Module T-Harness for Select 2008-2015 Subaru Vehicles
Radio replacement T-harness for for select Subaru vehicles 2008-2015. Greatly simplifies the installation of the Maestro RR module sold separately.
Click Here to View Vehicle Coverage Information
Aftermarket Head-Unit Replacement Maestro-Module T-harness for Select 2013-UP Subaru, Scion and Toyota Vehicles
Radio replacement T-harness for select Subaru, Scion, Toyota vehicles 2013-2019. Greatly simplifies the installation of the Maestro RR module sold separately.
Click Here to View Vehicle Coverage Information - confirmed through 2021
Single 10-Inch 600-Watt 2-Ohm Subwoofer-Enclosure for Select 2013-Up Subaru BRZ, 2013-2016 Scion FR-S, and 2016-UP Toyota 86 Vehicles
Somebody finally paid attention and designed a no-nonsense, back-to-basics sports car that puts the emphasis on driving enjoyment. Now all you need to do is add a healthy dose of JL Audio to ratchet up the listening enjoyment and make every drive even more memorable.
JL's patented 10TW3 thin-line driver is the engine inside this Stealthbox® system, and it produces spectacular results from its perch in the passenger side rear corner of the trunk. Your trunk remains completely useful and your installation is neat and secure. A grille is also included to protect your investment.
The Hard Data: Contains one 10TW3-D4 subwoofer in a sealed enclosure. 400 watt power handling. Wired for 2 ohm mono. Installs in the passenger side of trunk compartment. Black steel mesh woofer grille is included.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
JL Audio SB-S-BRZFRS/10TW3 Installation Manual
Stereo Replacement Antenna Adapter for Select 2006-UP Lexus, Scion, Subaru, and Toyota Vehicles
If you are replacing the radio in your vehicle, this antenna cable adapter ensures that you can continue to use your factory antenna. It is a simple yet necessary cable that adapts the vehicle’s original antenna cable to plug into an aftermarket radio with a male Motorola™ connector and a blue wire lead on one end, and a female Molex connector on the other.
Antenna adapter cable
Used to adapt the vehicle’s antenna cable to use with an aftermarket radio
Male Motorola™ connector and a blue wire lead on one end
Female Molex connector on the other end
A blue wire is attached to the adapter that connects to the antenna turn-on lead of the aftermarket radio
Enter your vehicle model to see if this is compatible with your vehicle
Applications
LEXUS
CT 200h
2011-2017
ES Series
2019-2020
ES 300h, ES 350
2013-2018
GS Series
2013-2020
GS 350, GS 450h, GS 460
2010-2011
GX 460
2010-2020
HS 250h
2010-2012
IS Series
2014-2020
IS 250C, IS 350C, IS F
2006-2015
IS 250, IS 350
2006-2013
LC Series
2018-2020
LFA
2012-2012
LS Series
2013-2020
LS 460
2010-2012
LS 600h L
2010-2016
LX 570
2010-2020
NX Series
2015-2020
RC Series
2013-2020
RX Series
2016-2020
RX 350, RX 450h
2010-2015
UX Series
2019-2020
SCION
FRS
2013-2016
iM
2016
tC
2014-2015
SUBARU
Ascent
2019-2022
BRZ
2013-2022
Crosstrek
2016-2023
Forester
2014-2018
Impreza
2012-2023
Impreza WRX
2013-2014
Legacy
2012-2019
Outback
2012-2019
WRX STI
2016-2021
WRX
2015-2021
XV Crosstrek
2013-2015
TOYOTA
4Runner
2014-2023
86
2017-2020
Avalon
2013-2020
C-HR
2018-2022
Camry
2012-2022
Corolla
2012-2023
Corolla Hatchback
2019-2023
Corolla iM
2017-2018
FJ Cruiser
2011-2014
Highlander
2013-2023
Land Cruiser
2010-2020
Matrix
2013-2014
Mirai
2016-2019
Prius
2012-2020
Prius Plug-In (PHV)
2012-2015
Prius C
2012-2019
Prius Prime
2017-2020
Prius V
2012-2017
RAV4
2019-2020
RAV4 (non-EV)
2013.5-2018
RAV4 (non-EV)
2013-2013.5
RAV4
2012
Sequoia
2013-2022
Sienna
2015-2020
Tacoma
2012-2023
Tundra
2014-2021
Venza
2013-2015
Yaris
2018
Yaris
2012-2017
Head-Unit Replacement Antenna-Adapter Cable for Select 2005-2013 Subaru Vehicles
If you are replacing the radio in your vehicle, this antenna cable adapter ensures that you can continue to use your factory antenna. It is a simple yet necessary cable that adapts the vehicle’s original antenna cable to plug into an aftermarket radio with a male Motorola™ connector on one end and a female Subaru-style connector on the other.
Antenna adapter cable
Used to adapt the vehicle’s antenna cable to use with an aftermarket radio
Male Motorola™ connector on one end
Female Subaru-style antenna connector on the other end
Enter your vehicle model to see if this is compatible with your vehicle
Applications
SUBARU
Forester
2009-2013
Impreza
2008-2011
Impreza Outback Sport
2011-2011
Impreza WRX STI
2008-2012
Legacy
2005-2012
Outback
2005-2012
Tribeca
2008-2012
Head-Unit Replacement Antenna-Adapter Female-Cable for Select 2005-2013 Subaru Vehicles
If you are replacing the factory antenna in your vehicle, this antenna cable adapter ensures that you can continue to use your original factory radio. It is a simple yet necessary cable that adapts the aftermarket antenna cable to plug into the vehicle’s factory radio with a female Motorola™ connector on one end and a male Subaru-style antenna connector on the other.
Antenna adapter cable
Used to adapt the vehicle’s original factory radio to use with an aftermarket antenna
Female Motorola™ connector on one end
Male Subaru-style antenna connector on the other end
Applications
SUBARU
Forester
2009-2013
Impreza
2008-2011
Impreza Outback Sport
2011-2011
Impreza WRX STI
2008-2012
Legacy
2005-2012
Outback
2005-2012
Tribeca
2008-2012
Add-On FM Antenna-Adapter Kit for Select 2005-2013 Subaru Vehicles
If you are adding an external device with a built-in FM modulator in your vehicle, these antenna cable adapters ensure that you can continue to use your factory radio and antenna. These are simple yet necessary cables that adapt the vehicle’s original factory radio and antenna connectors to plug into the FM modulator.
Antenna adapter kit
Used to adapt the vehicle’s original factory radio and antenna connectors to use with an FM modulator
Cable #1 has a male Motorola™ connector on one end and a female Subaru-style antenna connector on the other
Cable #2 has a female Motorola™ connector on one end and a male Subaru-style antenna connector on the other
Enter your vehicle model to see if this is compatible with your vehicle
Applications
SUBARU
Forester
2009-2013
Impreza
2008-2011
Impreza Outback Sport
2011-2011
Impreza WRX STI
2008-2012
Legacy
2005-2012
Outback
2005-2012
Tribeca
2008-2012
Amplified or Non-Amplified Head-Unit Replacement Wiring-Harness for Select 1987-Up Toyota, Scion and Subaru Vehicles
Install a new car radio faster with this wiring harness that plugs right into the vehicle's connectors, allowing you to hook up the radio into the vehicle's electrical system. On one side, the wiring harness is color-coded with wires that you'll connect or solder into the aftermarket radio/receiver. The other side has a vehicle-specific adapter that connects directly into the original radio connectors for a quicker installation without having to cut each of the wires.
Keep in mind that you may need additional parts to complete your installation, including a dash kit, antenna adapter, and, depending on your vehicle, a special interface adapter to retain audio controls on your steering wheel or other important vehicle functions like navigation, video, and more. Look up your vehicle for more information.
Wiring harness for fast and easy radio installation
Plugs into the car's original radio connectors on one side
Color-coded wires on the other side are connected to the aftermarket radio
No wire cutting needed for factory radio connectors
Non-Amplified Applications
GEO
Prizm
1989-1992
LEXUS
ES250
1990-1991
LS 400
1990-1992
SCION
FRS
2013-2016
iM
2016
iQ
2012-2015
tC
2005-2015
xA
2004-2006
xB
2004-2015
xD
2008-2014
SUBARU
BRZ
2015-2022
Crosstrek
2016-2023
Forester
2009-2018
Impreza
2012-2023
Impreza WRX
2013-2014
Legacy
2012-2019
Outback
2012-2019
WRX, WRX STI
2016-2021
XV Crosstrek
2013-2015
TOYOTA
4Runner
1987-2019
86
2017-2020
Avalon
1995-2018
C-HR
2018
Camry
1987-2017
Camry Solara
1999-2008
Celica
1987-2005
Corolla
1987-2019
Corolla iM
2017-2018
Echo
2000-2005
FJ Cruiser
2007-2014
Highlander
2001-2019
Land Cruiser
1988-1994
Matrix
2005-2014
MR2 Spyder
2000-2003
MR2
1987-1995
Paseo
1992-1997
Pickup
1987-1995
Previa
1991-1997
Prius
2004-2019
Prius C
2012-2019
Prius Prime
2017-2020
Prius V
2012-2017
RAV4 (non-EV)
2013-2018
RAV4
1996-2012
Sequoia
2001-2019
Sienna
1996-2017
Solara
1999-2008
Supra
1986.5-1992
T-100
1993-1998
Tacoma
1995-2019
Tercel
1987-1998
Tundra
2000-2019
Van
1987-1990
Venza
2009-2015
Yaris
2007-2018
Amplified Applications
LEXUS
LS 400
1990-1994
SC 300, SC400
1992-2000
SUBARU
BRZ
2013-2022
Legacy
2013-2014
Outback
2013-2014
TOYOTA
86
2017-2020
Non-Amplified Head-Unit Replacement Wiring Harness Adapter for Select 2007-UP Chevy, Mazda, Nissan, Subaru and Suzuki Vehicles
Wiring harness for fast and easy radio installation
Plugs into the car’s original radio connectors on one side
Color-coded wires on the other side are connected to the aftermarket radio
No wire cutting needed for factory radio connectors
Provides electrical power to the radio for a four-speaker connection
Non-Amplified Applications
CHEVY
City Express
2015-2018
MAZDA
CX-5
2016
NISSAN
370Z
2009-2020
Altima
2007-2020
Cube
2009-2014
Frontier
2008-2021
GT-R
2009-2016
Juke
2011-2017
Kicks
2018-2021
Leaf
2012-2019
Maxima
2016-2020
Maxima
2007-2014
Murano
2009-2019
NP 300
2017-2018
NV
2012-2021
NV200
2013-2021
Pathfinder
2013-2020
Quest
2011-2016
Rogue
2008-2017
Rogue Select
2014-2015
Rogue Sport
2017-2018
Sentra
2007-2021
Titan
2008-2021
Titan XD
2016-2021
Versa
2007-2022
Versa Note
2014-2019
Xterra
2008.5-2015
SUBARU
Forester
2009-2015
Impreza
2008-2014
Impreza Outback Sport
2011
Impreza WRX
2013-2014
Impreza WRX STI
2008-2012
Legacy
2010-2014
Outback
2010-2014
WRX
2015
XV Crosstrek
2013-2014
SUZUKI
Equator
2009-2011
Non-Amplified Head-Unit Replacement Wiring Harness for Select 1990-2013 Subaru Vehicles
Wiring harness for fast and easy radio installation
Plugs into the car’s original radio connectors on one side
Color-coded wires on the other side are connected to the aftermarket radio
No wire cutting needed for factory radio connectors
Provides electrical power to the radio for a four-speaker connection
Non-Amplified Applications
SUBARU
Baja
2003-2006
Forester
1998-2013
Impreza
1993-2011
Impreza Outback Sport
2011
Impreza WRX STI
2008-2012
Legacy
1990-2009
Outback
1998-2009
Outback Sport
2005-2006
Replacement Six-by-Nine-Inch Door Speaker Trim Ring Adapter for Select 2003-UP Subaru and Toyota Vehicles
Accommodates 6X9 inch speaker – pair
Front Speaker Applications
LEXUS
GX Series
2010-2014
GX Series
2003-2009
LS 460
2010-2012
LS 460
2007-2009
LS 600h L
2013-2014
LS 600h L
2010-2012
LS 600h L
2008-2009
LS Series
2013-2014
SUBARU
Crosstrek
2018-2020
Impreza
2017-2020
Legacy
2015-2020
Outback
2018-2018
TOYOTA
(Camry) Solara
2004-2008
4Runner
2015-2020
4Runner
2010-2014
4Runner
2003-2009
Avalon
2013-2014
Avalon
2011-2012
Avalon
2005-2010
Camry
w/o JBL
2002-2011
FJ Cruiser
2007-2014
Highlander
2008-2012
Land Cruiser
2008-2014
Prius
2012-2015
Prius
2010-2011
Sequoia
2008-2014
Tacoma
2005-2015
Tundra
2014-2018
Tundra
crew cab
2007-2013
Venza
2009-2015
Six-Inch to 6-3/4-Inch Door Speaker Trim Ring Adapter for Select 2002-UP Lexus, Subaru and Toyota Vehicles
Accommodates 6 to 6.75 inch speaker – pair
Front Speaker Applications
LEXUS
CT 200h
2011-2013
GX Series
2010-2014
GX Series
2003-2009
LS 460
2010-2012
LS 460
2007-2009
LS 600h L
2013-2014
LS 600h L
2010-2012
LS 600h L
2008-2009
LS Series
2013-2014
SUBARU
Crosstrek
2018-2020
Impreza
2017-2020
Legacy
2015-2020
Outback
2018-2018
TOYOTA
(Camry) Solara
2004-2008
4Runner
2015-2020
4Runner
2010-2014
4Runner
2003-2009
Avalon
2013-2014
Avalon
2011-2012
Avalon
2005-2010
Camry
w/o JBL
2002-2011
FJ Cruiser
2007-2014
Highlander
2008-2012
Land Cruiser
2008-2014
Prius
2012-2015
Prius
2010-2011
Sequoia
2008-2014
Tacoma
2005-2015
Tundra
2014-2018
Tundra
crew cab
2007-2013
Venza
2009-2015
6.5-Inch to 6.75-Inch Door-Speaker Replacement Trim-Ring Adapter for Select 2015-2020 Subaru WRX Vehicles
Allows installation of aftermarket 6.5 to 6 3/4 inch speakers in the front doors
Includes one pair of adapters
Front Speaker Applications
SUBARU
WRX, WRX STI
2016-2020
Double-DIN Size Stereo-Replacement Dash-Kit for Select 2000-2020 Scion, Subaru and Toyota Vehicles
This stereo installation kit is engineered to help you install an aftermarket 4” tall (Double-DIN) radio into the original vehicle dashboard. This dash kit helps make radio replacement simple and is designed to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 4” tall aftermarket radio
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
A tech support number is available for installation help 7 days a week
Applications
SCION
FRS
2013-2016
iM
2016
iQ
2012-2015
tC
2005-2015
xA
2004-2006
xB
2004-2015
xD
2008-2014
SUBARU
BRZ
2013-2015
Forester
2014-2015
Forester
w/ SD card based nav
2009-2013
Impreza
2012-2014
Impreza WRX
2013-2014
WRX
2015
XV Crosstrek
2013-2014
TOYOTA
4Runner
2003-2009
86
2017-2020
Camry
2002-2006
Celica
2000-2005
Corolla iM
2017-2018
Echo
2000-2005
FJ Cruiser
2007-2014
Highlander
2013
Highlander
2001-2007
Matrix
2005-2010
MR2 Spyder
2000-2003
RAV4
2001-2005
Sequoia
2003-2007
Sienna
w/ base model nav
2011-2014
Tundra
Double Cab
2006
Tundra
Access Cab
2005-2006
Tundra
Double Cab
2004-2005
Tundra
Standard Cab
2004-2005
Tundra
2003
Yaris
hatchback
2012-2017
Yaris
sedan
2012
Yaris
w/o integrated climate & radio
2007-2011
Metra 95-8202 Installation Manual
Double-DIN Size Stereo-Replacement Dash-Kit for Select 2005-2009 Subaru-Outback and Legacy Vehicles
This stereo installation kit is engineered to help you install an aftermarket 4" tall (Double-DIN) radio into the original vehicle dashboard. This dash kit helps make radio replacement simple and is painted silver to match the original look and feel of the vehicle's dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 4" tall aftermarket radio
Painted silver to match the factory color and finish
Designed for models with manual climate controls
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
A tech support number is available for installation help 7 days a week
Applications
SUBARU
Legacy
w/o auto climate controls (2.5i)
2005-2009
Outback
w/o auto climate controls (2.5i)
2005-2009
Metra 95-8901 Installation Manual
Double-DIN Size Head-Unit Replacement Dash-Kit for Select 2008-2013 Subaru-Forester and Impreza Vehicles
This stereo installation kit is engineered to help you install an aftermarket 4" tall (Double-DIN) radio into the original vehicle dashboard. This dash kit helps make radio replacement simple and is designed to match the original look and feel of the vehicle's dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 4" tall aftermarket radio with an ISO-mount provision
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
Applications
SUBARU
Forester
w/ DVD based nav
2009-2013
Forester
2009-2013
Impreza
2008-2011
Impreza Outback Sport
2011
Impreza WRX
2013-2014
Impreza WRX STI
2008-2012
Metra 95-8902 Installation Manual
Double-DIN Size Head-Unit Replacement Dash-Kit for Select 2010-2014 Subaru-Outback and Legacy Vehicles
This stereo installation kit is engineered to help you install an aftermarket 4" tall (Double-DIN) radio into the original vehicle dashboard. This dash kit helps make radio replacement simple and is painted scratch-resistant silver to match the original look and feel of the vehicle's dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 4" tall aftermarket radio with an ISO-mount provision
Painted scratch-resistant silver 95-8903S (also available in scratch-resistant matte black: 95-8903B)
Designed for models without factory navigation
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes mounting brackets with detailed installation instructions
A tech support number is available for installation help 7 days a week
Applications
SUBARU
Legacy
w/ factory amp
2012-2014
Legacy
w/o factory amp (display radio)
2012-2014
Legacy
w/o factory amp (base radio)
2012-2014
Legacy
2010-2011
Outback
w/ factory amp
2012-2014
Outback
w/o factory amp (display radio)
2012-2014
Outback
w/o factory amp (base radio)
2012-2014
Outback
2010-2011
Metra 95-8903 Installation Manual
Double-DIN Size Head-Unit Replacement Dash-Kit for Select 2013-2015 Subaru Vehicles
This stereo installation kit is engineered to help you install an aftermarket 4" tall (Double-DIN) radio into the original vehicle dashboard. This dash kit helps make radio replacement simple and is painted scratch-resistant matte black to match the original look and feel of the vehicle's dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 4" tall aftermarket radio with an ISO-mount provision
Painted scratch-resistant matte black
Designed for models without factory navigation
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes mounting brackets with detailed installation instructions
Applications
SUBARU
Forester
2014-2015
Impreza
2012-2014
WRX
2015
XV Crosstrek
2013-2014
Metra 95-8905B Installation Manual
Double-DIN Size Head-Unit Replacement Dash-Kit for Select 2015-2021 Subaru Vehicles
This stereo installation kit is engineered to help you install an aftermarket 4" tall (Double-DIN) radio into the original vehicle dashboard. This dash kit helps make radio replacement simple and is painted gloss black and silver to match the original look and feel of the vehicle's dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 4" tall aftermarket radio with an ISO-mount provision
Painted gloss black
Factory climate controls are retained in their original location
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
Applications
SUBARU
Crosstrek
2016-2017
Forester
2016-2018
Impreza
2015-2016
WRX, WRX STI
2016-2021
XV Crosstrek
2015
Metra 95-8907HG Installation Manual
DIN or DDIN-Size Head-Unit Replacement Dash-Kit for Select 2000-2016 Toyota, Scion, Subaru and Pontiac Vehicles
This stereo installation kit has been engineered to help you install either a 2” tall (Single-DIN) or a 4” tall (Double-DIN) aftermarket radio into the original vehicle dashboard. This dash kit makes radio replacement simple and comes with a pocket that is installed below the 2” radio to fill the extra space in the radio opening, which can be used for storage. The pocket is not needed when installing a 4” tall radio. The dash kit is designed to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 2” or 4” tall aftermarket radio
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
Applications
PONTIAC
Vibe
2003-2008
SCION
FR-S
2013-2016
iQ
2012-2015
tC
2005-2016
xA
2004-2006
xB
2004-2015
xD
2008-2014
SUBARU
BRZ
2013-2015
TOYOTA
4Runner (excluding Limited)
2003-2009
86
2017-2020
Celica
2000-2005
Corolla (w/NAV)
2009-2013
Echo
2000-2005
FJ Cruiser
2007-2014
Highlander
2001-2007
Highlander
2013
Matrix
2003-2008
MR2 Spyder
2000-2005
RAV4
2001-2005
Sequoia
2003-2007
Tundra
2003-2006
Yaris
2012-2017
Yaris (3-door)
2007-2010
Yaris (4-door)
2007-2010
Metra 99-8300 Installation Manual
DIN-Size Head-Unit Replacement Dash-Kit for Select 2005-2009 Subaru-Outback and Legacy Vehicles
This stereo installation kit has been engineered to help you install a 2” tall (Single-DIN) aftermarket radio into the original vehicle dashboard. This dash kit makes radio replacement simple and comes with a built-in pocket that is located above the 2” radio to fill the extra space in the radio opening, which can be used for storage. The dash kit is contoured, textured and painted gray to compliment the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 2” tall aftermarket radio utilizing our patented quick-release, snap-in ISO mount system with custom trim ring
Contoured, textured and painted gray to compliment the factory dash
Designed for models with manual climate controls
Retains factory climate controls in their original location
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
Applications
SUBARU
Legacy
w/o auto climate controls (2.5i)
2005-2009
Outback
w/o auto climate controls (2.5i)
2005-2009
Metra 99-8901 Installation Manual
DIN-Size Head-Unit Replacement Dash-Kit for Select 2008-2014 Subaru-Impreza and Forester Vehicles
This stereo installation kit has been engineered to help you install a 2” tall (Single-DIN) aftermarket radio into the original vehicle dashboard. This dash kit makes radio replacement simple and comes with a built-in pocket that is located below the 2” radio to fill the extra space in the radio opening, which can be used for storage. The dash kit is designed to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 2” tall aftermarket radio utilizing our patented quick-release, snap-in ISO mount system with custom trim ring
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and detailed installation instructions
Applications
SUBARU
Forester
w/ DVD based nav
2009-2013
Impreza
2008-2011
Impreza Outback Sport
2011
Impreza WRX
2013-2014
Impreza WRX STI
2008-2012
Metra 99-8902 Installation Manual
DIN-Size Head-Unit Replacement Dash Kit for Select 2010-2014 Subaru Legacy and Outback Vehicles
This stereo installation kit has been engineered to help you install a 2” tall (Single-DIN) aftermarket radio into the original vehicle dashboard. This dash kit makes radio replacement simple and comes with a built-in pocket that is located below the 2” radio to fill the extra space in the radio opening, which can be used for storage. The dash kit is painted scratch-resistant matte black to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 2” tall aftermarket radio
Painted scratch-resistant matte black
Designed for models without factory navigation
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and detailed installation instructions
Applications
SUBARU
Legacy
w/ factory amp
2012-2014
Legacy
w/o factory amp (display radio)
2012-2014
Legacy
w/o factory amp (base radio)
2012-2014
Legacy
2010-2011
Outback
w/ factory amp
2012-2014
Outback
w/o factory amp (display radio)
2012-2014
Outback
w/o factory amp (base radio)
2012-2014
Outback
2010-2011
Metra 99-8903B Installation Manual
Factory Backup-Camera to Aftermarket Head-Unit Wiring Harness for Select 2012-2015 Toyota, Scion and Subaru Vehicles
The CAM-TY11 is a reverse camera T-harness that gives the ability to add a reverse camera input for Toyota and select Scion and Subaru 6.1” touchscreen radios. The harness is Plug-and-Play with no need to connect to reverse lamps for the reverse trigger.
Applications
SCION
FRS
2013-2015
IQ
2013-2015
TC
2014-2015
XB
2013-2015
XD
2013-2014
SUBARU
BRZ
2013-2015
TOYOTA
4RUNNER
2012-2014
AVALON
2012-2014
CAMRY
2012-2014
COROLLA
2013
HIGHLANDER
2012-2014
PRIUS
2012-2015
PRIUS V
2012-2014
RAV4
2012-2014
SEQUOIA
2013
TACOMA
2012-2013
VENZA
2012-2014
