At this present time our store location is open by appointment only.

All

All of Our Products Currently Listed on the Website

All of Our Products Currently Listed on our Website

9 products

  • Alpine R2-DB8V-TRK : Dual 8" Loaded Under Seat Subwoofer Enclosure with Amp Space, 750W @ 2Ω Jeep and other Pickups Alpine R2-DB8V-TRK : Dual 8" Loaded Under Seat Subwoofer Enclosure with Amp Space, bottom side.

    Alpine R2-DB8V-TRK : Dual 8" Loaded Under Seat Subwoofer Enclosure with Amp Space, 750W @ 2Ω Jeep and other Pickups

    Pre-Order Today!

    From towing to travel, you depend on your truck to get you where you want to go, but can you rely on getting the best performance from your sound system? Now you can add deep, accurate bass in your truck without compromising valuable cabin space with the new R2-DB8V-TRK dual 8” Alpine Halo R-Series preloaded truck subwoofer enclosure with the ProLink system and amplifier space. The enclosures were intentionally crafted to fit most full-size trucks. Two 8” subwoofers are preloaded into a compact enclosure for under the seat installation and linked with a ProLink bracket that can adjust from 51”-40”. Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine’s S-A75M Mono Power Amplifier (sold separately). Rubber “feet” are adjustable in height to accommodate uneven truck floors.  These ported subwoofer enclosures feature the next-generation 8” R-Series subwoofers with a more powerful motor that creates deeper bass while Alpine’s High Amplitude Multi-Roll (HAMR) surround technology allows the subwoofer cone to efficiently move air while staying cool for incredible accuracy. A new ceramic composite dust cap has higher heat resistance that ensures non-stop bass performance. Alpine’s new preloaded truck subwoofer enclosures join the Alpine Halo family with a premium, unmistakable design. The enclosure pulls design cues from the Alpine Halo display with unique, curved edges outlined by a silver trim and a front link bracket cover with an Alpine logo badge. The 5/8” MDF enclosures are covered in a premium black carpet that will elevate the look of your truck. With two preloaded R2-W8D2 8” R- Series subwoofers that are tuned to 36Hz, R2-DB8V-TRK is optimized to perform with Alpine’s R-Series sound system line. Dual voice coils are wired in parallel for a 2Ω load that’s compatible with Alpine’s R-Series R2-A75M mono power amplifier. Features Groundbreaking Alpine Halo Design  ProLink™ Ported Enclosure Expandable Width from 40" to 51"  Compact, Under-the-Seat Installation in Most Full-Size Trucks Integrated Amplifier Tray (not applicable with all vehicles) Rubber, Modular Stackable Foot Design Accommodates Uneven Truck Floor Areas Ported Enclosures with High-Performance S-Series Subwoofers   Front Link Alpine Branded Bracket Side-Firing Cabin Loading Ports Premium Alpine Wire Terminals CARB Compliant 5/8" MDF Construction  Premium Black Carpet  Specifications Dimensions: 40"-51" (Adjustable Width) x 8-3/4” (H) x 13-3/4” (D) 750W RMS Frequency Response: 32Hz-200Hz  Sensitivity: 84dB  Dual voice coils Wired in Parallel for a 2Ω Load (Compatible with R-A75M) Vented Enclosure Tuning Frequency: 36Hz   Custom spring-loaded speaker terminals fit up to 12AWG speaker wire  Alpine R2-DB8V-TRK BrochureAlpine R2-DB8V-TRK Manual

    Pre-Order Today!

    $799.99

  • Alpine R2-W10D : 750W 10" Subwoofer Driver, Dual Voice Coil Alpine R2-W10D : 750W 10" Subwoofer Driver, top side.

    Alpine R2-W10D : 750W 10" Subwoofer Driver, Dual Voice Coil

    Pre-Order Today!

    R-Series 10-Inch 750-Watt Subwoofer Driver, 2-Ohm or 4-Ohm Dual Voice Coil Since the Type R platform, Alpine’s R-Series sound system family has been known for its incredible output and reliable performance. Now Alpine introduces the next-generation of sound performance with the 2nd-Gen R-Series Subwoofers with even more bass output. The 2nd-Gen R-Series Subwoofers now feature larger, double-stacked magnets that contribute more motor force for deeper bass and tighter bass control from the subwoofer cone compared to the previous generation. An integrated Faraday ring minimizes distortion for cleaner bass output. A Kevlar-treated cone ensures durability in the subwoofer for reliable performance, even at high volumes. A new polypropylene/ceramic composite dust cap ensures rigidity while also providing incredible internal damping (vibration absorption) to smooth out the bass response and reproduce tight bass. This premium, unique material also has higher heat reliability that ensures non- stop bass performance. The 2nd-Gen R-Series Subwoofers contain a Dual Voice Coil (DVC) with easy configuration jumpers that allow for flexible applications. A new “EZ- Change” twist-lock grille mounting system makes it easy to install and remove an optional grille without mounting screws for added protection to the cone. The R2-W10D2 and R2-W10D4 is compatible with the KTE-10G Grille System (sold separately). The 2nd-Gen R-Series Subwoofers contain Alpine’s High Amplitude Multi- Roll (HAMR) Surround Technology. This rubber surround allows the subwoofer cone to efficiently move air while staying cool. This technology allows for 20mm of total cone excursion and motion that creates incredible accuracy from the subwoofer. Features Dual Voice Coil (DVC) Subwoofers with Configuration Jumpers Polypropylene/Ceramic Composite Dust Cap  Kevlar Reinforced Pulp Cone High-Performance subwoofers   Twist-Lock Grille Mount System  High-Amplitude Multi-Roll (H.A.M.R.) Surround  Large Double-Stacked Magnets Specifications 750W RMS  2250W Peak Power Handling  Frequency Response: 26Hz-200Hz  Sensitivity (1W/1m): 82.4dB   Nominal Impedance: 4Ω Voice Coil: 65mm   X-Max: 20mm Magnet Weight: 123oz  Mounting Depth: 6” (152mm) Cutout Size: 9-1/16” (231mm) Push-Type Speaker Terminals (Up to 8AWG Wire Size) CTA-2031 Compliant  Alpine R2-W10D Manual

    Pre-Order Today!

    $329.99

  • Alpine R2-W12D : 750W 12" Subwoofer Driver, Dual Voice Coil Alpine R2-W12D : 750W 12" Subwoofer Driver, front view.

    Alpine R2-W12D : 750W 12" Subwoofer Driver, Dual Voice Coil

    Pre-Order Today!

    R-Series 12-Inch 750-Watt Subwoofer Driver, 2-Ohm or 4-Ohm Dual Voice Coil Since the Type R platform, Alpine’s R-Series sound system family has been known for its incredible output and reliable performance. Now Alpine introduces the next-generation of sound performance with the 2nd-Gen R-Series Subwoofers with even more bass output. The 2nd-Gen R-Series Subwoofers now feature larger, double-stacked magnets that contribute more motor force for deeper bass and tighter bass control from the subwoofer cone compared to the previous generation. An integrated Faraday ring minimizes distortion for cleaner bass output. A Kevlar-treated cone ensures durability in the subwoofer for reliable performance, even at high volumes. A new polypropylene/ceramic composite dust cap ensures rigidity while also providing incredible internal damping (vibration absorption) to smooth out the bass response and reproduce tight bass. This premium, unique material also has higher heat reliability that ensures non- stop bass performance. The 2nd-Gen R-Series Subwoofers contain a Dual Voice Coil (DVC) with easy configuration jumpers that allow for flexible applications. A new “EZ- Change” twist-lock grille mounting system makes it easy to install and remove an optional grille without mounting screws for added protection to the cone. The R2-W12D2 and R2-W12D4 is compatible with the KTE-12G Grille System (sold separately). The 2nd-Gen R-Series Subwoofers contain Alpine’s High Amplitude Multi- Roll (HAMR) Surround Technology. This rubber surround allows the subwoofer cone to efficiently move air while staying cool. This technology allows for 20mm of total cone excursion and motion that creates incredible accuracy from the subwoofer. Features Dual Voice Coil (DVC) Subwoofers with Configuration Jumpers Polypropylene/Ceramic Composite Dust Cap  Kevlar Reinforced Pulp Cone High-Performance subwoofers   Twist-Lock Grille Mount System  High-Amplitude Multi-Roll (H.A.M.R.) Surround  Large Double-Stacked Magnets Specifications 750W RMS  2250W Peak Power Handling  Frequency Response: 24Hz-200Hz  Sensitivity (1W/1m): 84.5dB   Nominal Impedance: 4Ω Voice Coil: 65mm   X-Max: 20mm Magnet Weight: 144oz  Mounting Depth: 6-1/2” (152mm) Cutout Size: 10-7/8” (231mm) Push-Type Speaker Terminals (Up to 8AWG Wire Size) CTA-2031 Compliant  Alpine R2-W12D Manual

    Pre-Order Today!

    $379.99

  • JL Audio 10W7AE : 10-Inch 750-Watt Subwoofer Driver, 3-Ohm SVC, 10th Anniversary Edition JL Audio 10W7AE : 10-Inch 750-Watt Subwoofer Driver, 3-Ohm SVC, 10th Anniversary Edition, side view.

    JL Audio 10W7AE : 750W 10" Subwoofer Driver, 3Ω Single Voice Coil

    Pre-Order Today!

    W7-Series 10-Inch 750-Watt Subwoofer Driver, 3-Ohm SVC The audiophile 10W7AE subwoofer driver delivers amazing excursion capability while maintaining undeniable tracking accuracy under power in the low end sound spectrum. This 10" W7AE sub is best used with an amplifier in the 300W - 750W RMS range and is optimized to operate in a 1.25 cu. ft. (35.4 l) sealed enclosure, or a 1.5 cu. ft. (42.5 l) ported enclosure. The JL Audio 10W7AE-3 Anniversary Edition subwoofer driver is the 10th Anniversary of the launch of the JL W7 subwoofers. They are identical to the original W7's drivers but they are distinguished by the following cosmetic differences: Satin-Black Powdercoated Baskets Bright Anodized Surround Clamp Ring Anniversary Edition Cone Badge Anniversary Edition Terminal Label  General Specifications Continuous Power Handling 750W RMS Recommended Amplifier Power 300W - 750W RMS Nominal Impedance 3Ω JL Audio 10W7AE Manual

    Pre-Order Today!

    $999.99

  • JL Audio CLS110RG-W7AE : 10" Subwoofer Enclosure - 750W RMS 3Ω JL Audio CLS110RG-W7AE : 10" Subwoofer Enclosure side view.

    JL Audio CLS110RG-W7AE : 10" Subwoofer Enclosure, 750W RMS 3Ω

    Pre-Order Today!

    ProWedge-Series 10-Inch 750-Watt Enclosed Subwoofer System, 3Ω Sealed Enclosure For those who seek the ultimate in compact-enclosure sub-bass fidelity, we offer this sealed ProWedge™ system, in which the superb performance capabilities of the W7AE subwoofer driver are harnessed within a compact, sealed enclosure. This system has it all: extension, impact, detail and smooth response... at any listening level. This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10W7AE-3 and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat. Finish: Black, high-grade automotive carpet, with gloss-black laminated decorative front baffle trim. Three solid aluminum bars provide stylish and rugged woofer protection. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 300 - 750WNominal Impedance: 3 Ω General Specifications Continuous Power Handling (RMS) 750 W System Nominal Impedance 3 Ω Enclosure Type Sealed, rear-firing design Finish Black carpet / laminate Grille Included Aluminum Bar Grille Physical Specifications External Width (W) 17.75 in / 451 mm External Height (H) 14.625 in / 371 mm External Depth (D1) 16.625 in / 422 mm External Top Surface Depth (D2) 11.50 in / 292 mm Net Weight 61.2 lb / 27.77 kg JL Audio CLS110RG-W7AE Brochure

    Pre-Order Today!

    $1,399.99

  • 750W 10" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 42CWQ10 750W 10" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 42CWQ10, side view.

    Kicker 42CWQ10 : 750W 10" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil

    Pre-Order Today!

    10-Inch 750-Watt Subwoofer Driver, 2-Ohm or 4-Ohm DVC The 10" CompQ audiophile competition subwoofer driver by Kicker is the pinnacle of Kicker's round speaker line, with nearly identical construction and performance as the L7 Series square subs. The Kicker 42CWQ102 and 42CWQ104 have a 750W RMS power handling and extremely accurate bass reproduction featuring a ribbed Santoprene® surround and a BlueLace™ large-diameter progressive roll spider for extreme flexibility at 750-Watts of Continuous Power. The CompQ 10-Inch sub works best with a sealed or ported enclosure with 750 watts of recommended power. See below for more details. Specifications Rated Impedance [Ω] 2 or 4 DVC Fs [Hz 38 Sensitivity [1W, 1m] 85.7 Qts 0.437 Qms 8.916 Qes 0.46 Re [Ω] 6.52 Vas [ft³, L] .59, 16.75 Recommended Amplifier Power (watts RMS) 700 Outer Frame Dimension [in, cm] 10 11/16, 27.2 Mounting Depth [in, cm] 6 3/8, 16.2 Mounting Cutout [in, cm] 9 3/16, 23.4 Frequency Response [Hz] 24 – 100 Kicker CompQ Subwoofer Manual

    Pre-Order Today!

    $279.99

  • 750W 12" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 44CVX12 750W 12" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 44CVX12, front side view.

    Kicker 44CVX12 : 750W 12" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil

    Pre-Order Today!

    12-Inch 750-Watt Subwoofer Driver, 2-Ohm or 4-Ohm DVC The CompVX 12" subwoofer driver by Kicker is designed with high-temp dual voice coils that deliver up to 750W of amplified RMS power. A solid pole-piece provides more mass to disperse heat. A thick polypropylene cone complements the SoloKon™ cone reinforcement system and the oversized suspension system. The Kicker 44CVX122 and 44CVX124 12 inch subwoofers have a UniPlate™ extended pole piece & backplate for superior heat dissipation and satin nickel spring-loaded speaker terminals. Specifications Size (IN.,CM) 12, 30 Impedance (OHMS) 2 or 4 DVC Recommended Amplifier Power (watts RMS) 750 Peak Power (watts, per ANSI/CTA-2031-A) 1500 Sensitivity (dB 1w/1m) 87.1 Frequency Response (Hz) 20-500 Mounting Depth (in, cm) 6 11/16, 16.9 Mounting Cutout (in, cm) 11 1/16, 28 Min Sealed Box Vol (cu. ft, L) 1.0, 28.3 Max Sealed Box Vol (cu. ft, L) 4.6, 130 Min Vented Box Vol (cu. ft, L) 1.75, 49.6 Max Vented Box Vol (cu. ft, L) 2.25, 63.7 Kicker CompVX Subwoofer Manual

    Pre-Order Today!

    $279.99

  • 750W 12" Square Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 44L7S12 750W 12" Square Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 44L7S12, side view.

    Kicker 44L7S12 : 750W 12" Square Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil

    Pre-Order Today!

    12-Inch Square 750-Watt Subwoofer Driver, 2-Ohm or 4-Ohm DVC The audiophile competition 12" L7 square sub by Kicker has an advanced motor structure that includes a large-diameter spider for less flex, longer life and superior accuracy. This 12 inch 750W driver has two dual high-temp voice coils, an injection-molded polypropylene cone, SoloKon™ 360-degree back bracing, a ribbed Santoprene surround with blue surround stitching and Kicker's patented UniPlate™ back plate and pole piece. Perimeter venting for thermal heat dispersion management keeps this earth shattering 12 inch square sub nice and cool.  This 12" L7 square sub can handle up to 750W RMS of amplifier power and comes with dual spring-loaded speaker terminals for a solid speaker wire connection. Specifications Size (IN.,CM) 12, 30.5 Impedance (OHMS) 2 or 4 DVC Recommended Amplifier Power (watts RMS) 750 Peak Power (watts, per ANSI/CTA-2031-A) 1500 Sensitivity (dB 1w/1m) 88.6 Frequency Response (Hz) 20-100 Mounting Depth (IN.,CM) 6 11/16, 16.9 Mounting Cutout, Square (IN.,CM) 11 1/16, 28.1 Min Rec Sealed Box Volume (CU. FT., Liters) 1.25, 35.4 Max Rec Sealed Box Volume (CU. FT., Liters) 2.0, 56.64 Min Rec Vented Box Volume (CU. Ft., Liters)** 1.75, 49.6 Max Rec Vented Box Volume (CU. Ft., Liters)** 3.25, 92.1 Kicker Solo-Baric L7 Subwoofer Manual

    Pre-Order Today!

    $349.99

  • 750W 12" Subwoofer Enclosure, 2Ω Configuration : Kicker 44VL7S122

    Kicker 44VL7S122 : 750W 12" Subwoofer Enclosure, 2Ω Configuration

    Pre-Order Today!

    12-Inch 750-Watt Loaded Subwoofer Enclosure, 2-Ohm Final Impedance This L7 series 12" loaded sub box by Kicker comes with one Solo-Baric L7S sub loaded into a custom engineered to spec subwoofer enclosure made of thick MDF construction with a custom port design. Heavy internal bracing with thick black carpeting complement the Kicker embroidered logo on this box. This 12-inch L7 subwoofer enclosure is best suited with 750W RMS of amplified power. Specifications Type single Woofer [in, cm] Solo-Baric L7 12" Impedance [Ohms] 2 Recommended Amplifier Power (watts RMS) 750 Peak Power (watts, per ANSI/CTA-2031-A) 1500 SENSITIVITY [dB 1w/1m] 86.9 Box Top Depth (in, cm): 14 3/4, 37.4 Box Bottom Depth (in, cm): 17 7/8, 45.5 Box Height (in, cm): 16, 40.6 Box Width (in, cm): 18-3/4, 47.6 Kicker L7 Solo-Baric Subwoofer Enclosure Manual

    Pre-Order Today!

    $449.99

Login

Forgot your password?

Don't have an account yet?
Create account