JL Audio

Hideaway Style Weatherproof Bluetooth Receiver The MBT-RXv2 wireless receiver is designed to easily add high-quality streaming audio capability to virtually any sound system. Equipped with BLUETOOTH wireless technology and the Qualcomm® aptX™ HD audio codec, the MBT-RXv2 wireless receiver sends top-quality sound directly to any amplifier or source unit with line-level inputs via a pair of crystal-clear preamp outputs (4-volt RMS). Housed in a sealed and water-resistant (IPX7-rated) chassis, this premium audio receiver is ideally suited for challenging outdoor applications, plus its tiny design can easily fit in almost any installation location. A simple procedure is all it takes to pair MBT-RXv2 to your device, with automatic reconnection afterward. All playback, including volume and media selection, is controlled by using your compatible streaming device from up to 35’ (11 meters) away. The receiver includes +12-volt (1 amp) remote turn-on output for amplifier control. Specifications Bluetooth® Profile A2DP (High-Quality, Stereo Audio) Bluetooth® Core Specification Version 5.0 with Qualcomm® aptX™-HD audio Frequency Response 20 Hz - 20 kHz (±1dB) Outputs One Stereo Pair, Low-Level RCA Plugs Output Voltage 4V RMS S/N Ratio 100 dB (20 Hz - 20 kHz) Input Operating Voltage 10 - 16 VDC Current Draw 40 mA Fuse Rating 2 A Mini ATC Connection Range* Up to 35' / 11 m JL Audio MBT-RX Manual

Read more less

Hideaway Style Weatherproof Bluetooth Receiver with Panel Mount Controller Engineered for marine, motorsports and outdoor applications, the MBT-CRXv3 wireless receiver is designed to deliver top-quality streaming audio to almost any sound system over land or water. Housed in a compact and water-resistant chassis (IP67-rated), this premium audio receiver is well suited for small watercraft, motorcycles, golf carts and utility vehicles. Needing just a single hole for installation, the MBT-CRXv3 wireless receiver can function as a stand-alone, wireless audio source unit or as an add-on, wireless audio controller and receiver. Large backlit controls permit easy operation day or night, and an adaptor plate is included for front-mount applications or where rear access is limited. Outfitted with BLUETOOTH wireless technology and the Qualcomm® aptX™ HD audio codec, MBT-CRXv3 delivers dynamic, CD-like sound from your compatible streaming device from up to 35’ (11 meters) away. Two sets of stereo preamp outputs (4-volt RMS) are on hand to feed two main audio zones plus a dedicated subwoofer output. Independent audio zone level controls with LED color indicators ensure effortless command of your sound system while your streaming device is tucked away. The receiver includes +12-volt (1 amp) remote turn-on output for amplifier control. Specifications Bluetooth® Core Specification Version 5.0 with Qualcomm® aptX™-HD audio Current Draw 83 mA (at idle) / 108 mA (at full output) Input Operating Voltage 8 - 16 VDC Fuse Rating 2A Mini ATC Output Voltage 4V RMS Frequency Response 20 Hz - 20 kHz (±1dB) Connection Range* Up to 35 ft / 11 m S/N Ratio 101 dB (20 Hz - 20 kHz) Remote Turn-on Output Capacity 350 mA (max) Bluetooth® Profile A2DP (High-Quality, Stereo Audio) Outputs Two Stereo Pairs Per Zone, Plus One Mono Subwoofer (RCA Plugs) JL Audio MBT-CRXv2 Manual

Read more less

MediaMaster-Series Add-on Marine 2.3-Inch Remote Controller The MMR-20-BE is a wired remote controller engineered to add auxiliary control functionality to MediaMaster® source units. Built for marine and off-road applications, its weatherproof (IP67 rated) design places frequently used functions of your MediaMaster® source unit in a simple, intuitive design that’s easy-to-use. Its large, backlit controls and LED source indicators are easily identifiable, day or night, with brightness settings that can be adjusted using your MediaMaster® source unit. A small footprint and simple, one-hole design means the MMR-20-BE can be installed in even the tightest of spaces. Depending on your system layout, you may add up to three MMR-20-BE remote controllers to a single MediaMaster® source unit. Each MMR-20 can be connected up to 75 ft. (22.8 m) away from its source unit.  MediaMaster® remote control capabilities include: Power On/Off Source Select Volume Up/Down Track Up/Down (USB & BT) Track Fast-Forward/Fast-Rewind (USB) Favorite Up/Down (Radio) Play/Pause (USB & BT) Mute/Unmute (Radio & Aux) The MMR-20-BE is compatible with these MediaMaster® source units: MM100s-BE MM100s MM50 Note: Requires MMC Connection Cables (sold separately). Connection cables are available in several lengths to fit your specific application. Y-splitters are also available to connect up to three remotes to a MediaMaster® source unit. JL Audio MMR-20-BE Manual

Read more less

MediaMaster-Series Add-on Marine Network Zone Controller with 2.8-Inch Screen The MMR-40 is a NMEA 2000® Network Controller engineered to add full-function, auxiliary control to MediaMaster® source units. Outfitted with a NMEA 2000® Micro-C connector, the MMR-40 connects to a host MediaMaster® source unit in two ways: Direct interface with a vessel's NMEA 2000® network using applicable NMEA 2000® cables and connectors (not included) Direct connection of one MMR-40 with one host MediaMaster® source unit using MMC-PN2K powered network cables (sold separately) to simulate an isolated, stand-alone NMEA 2000® network Once connected, the MMR-40 automatically recognizes the host MediaMaster® source unit and will then mirror all host source unit controls and screen info onto the MMR-40's full-color, 2.8-inch LCD display, resulting in a complete MediaMaster® user experience. The MMR-40 is equipped with independent display theme and lighting controls for maximum mounting location flexibility, regardless of the settings on the host source unit. Engineered for real-world marine (and many outdoor) applications, its weatherproof (IP66 rated) chassis is built to withstand the harshest environments. The MMR-40 includes the following features: NMEA 2000® Certified (LEN 4) Easy-to-read, high-brightness, 2.8-inch full-color LCD display with large backlit controls Independent day/night display themes and lighting controls IP66 rated for real marine duty Protective Sun Cover included Note: The MMR-40 is not a stand-alone receiver and does not function without a connected MediaMaster® source unit. All remote control functionality of the MMR-40 is solely derived from the host source unit. Functionality of the MMR-40 requires connection to a NMEA 2000® network or use of MMC-PN2K powered network cables (sold separately). JL Audio MMR-40 Manual

Read more less