JL Audio

C2-Series 6x9" 70-Watt  3-Way Coaxial Speaker System The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs. The C2-690tx system features 6 x 9-inch (150 x 230 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. The 6 x 9-inch (150 x 230 mm) format is a direct fit in many vehicles. The Mid-Range driver is ferrofluid-cooled, with a 2-inch Mylar® cone diaphragm to smoothly bridge the gap between the woofer and the dome tweeter. Tweeters are mounted next to the mid-range driver and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles. Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair. General Specs Continuous Power Handling (RMS) 70 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 15 - 125 W / Ch. System Efficiency 93 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 53 Hz - 22 KHz ± 3 dB JL Audio C2-690tx Manual

Read more less

C1-Series 6x9-Inch 60-Watt Coaxial Speaker System, 3-Way C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles. To facilitate fit, spacer adaptor rings are included allowing the C1-690tx to be installed in bottom-mount applications. C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-690tx is a proprietary, stamped, steel 6 x 9-inch (150 x 230 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers. Equipped with dual true, edge-driven, aluminum dome tweeters, the C1-690tx stands apart from others in its category with superior high-frequency clarity and separation. The design of each tweeter delivers inherently excellent off-axis response and high-frequency extension. Both high-frequency drivers also benefit from the damping of silk surround suspensions and Ferrofluid in the voice coil gaps, along with the superior strength of neodymium magnetics. A true, mixed order filter network is employed to further enhance smoothness and improve power handling. When it comes to value, C1 is the real deal! Sold as a pair. Grilles not available. General Specifications Continuous Power Handling (RMS) 60 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 10 - 100 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 36 Hz - 24 KHz ± 3 dB JL Audio C1-690tx Manual

Read more less

C2-Series 6x9" 70-Watt  3-Way Coaxial Speaker System The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs. The C2-690tx system features 6 x 9-inch (150 x 230 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. The 6 x 9-inch (150 x 230 mm) format is a direct fit in many vehicles. The Mid-Range driver is ferrofluid-cooled, with a 2-inch Mylar® cone diaphragm to smoothly bridge the gap between the woofer and the dome tweeter. Tweeters are mounted next to the mid-range driver and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles. Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair. General Specs Continuous Power Handling (RMS) 70 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 15 - 125 W / Ch. System Efficiency 93 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 53 Hz - 22 KHz ± 3 dB JL Audio C2-690tx Manual

Read more less

C6-Series 6.5-Inch 100-Watt 3-Way Component Audiophile Speaker System Pairing a full-frame 6.5-inch woofer with a 1-inch silk dome tweeter, the C6 series offers advanced sound technology for an exceptional car audio listening experience. When purchased as a component system, premium passive crossover networks are included with the speakers. Proprietary motor, suspension and cone modeling systems are employed, resulting in reduced distortion, improved transient performance and stellar sound quality. The woofer’s center cap is designed to optimize its high-frequency response for seamless tweeter transition. An edge-driven pure silk dome tweeter design, when paired with the C6 woofer, produces sparkling detail with excellent off-axis response and damping for balanced coverage in your listening environment. An automatic, solid-state tweeter protection circuit minimizes the possibility of tweeter failure. Included with each C6 component system, these premium filter networks offer 4 levels of tweeter adjustment. The three-way component system includes an additional 4 levels of midrange adjustment. All incorporate polyester film and electrolytic capacitors as well as low-loss air-core inductors — all accessible beneath a protective polycarbonate cover. Benefiting from years of woofer design experience, the robust JL Audio 6.5-inch C6 component speakers feature purpose-engineered cast-alloy frames outfitted with our Elevated Frame Cooling technology. On a wide range of car audio applications, the C6 speaker system delivers superb sound when powered by an amplifier in the 25- to 150-watt range. The woofer’s oversized voice coil offers extended power handling capability while minimizing thermal compression and distortion at higher volume levels. Speakers are sold as a pair. General Specifications SIZES 6.5" CONTINUOUS POWER HANDLING (RMS) 100 W SENSITIVITY (SPL @ 1 W/1 M) 2.75": 83.50 dB6.5": 87.37 dB SENSITIVITY (SPL @ 1 W/0.5 M) 1": 96 dB SENSITIVITY (SPL @ 2.83 V/1 M) 2.75": 86.50 dB6.5": 90.33 dB FREQUENCY RESPONSE (+/- 3 DB) 53 Hz-21 KHz NOMINAL IMPEDANCE 4 Ω RECOMMENDED AMPLIFIER POWER (RMS) 25-150 W/Channel VOICE COIL DIAMETER 2.75": 0.8" (20.5 mm)6.5": 1.27" (32 mm) CONE MATERIAL Vacuum-formed, mineral-filled polypropylene TWEETER TYPE Silk Dome TWEETER SIZE 1" (25 mm) GRILLE(S) INCLUDED WARRANTY 1 year Mounting Dimensions FRAME OUTER DIAMETER 2.75": 2.52" (77 mm)6.5": 6.5" (165 mm) MOUNTING DEPTH CLEARANCE 2.75": 1.42" (36 mm)6.5": 2.60" (66 mm) FRONTAL GRILLE PROTRUSION 2.75": 0.47" (12 mm)6.5": 1" (25 mm) MOUNTING HOLE 2.75": 2.52" (64 mm)6.5": 5.46" (139 mm) GRILLE TRAY OUTER DIAMETER 2.75": 3.58" (91 mm)6.5": 6.76" (172 mm) BOLT HOLE CIRCLE 2.75": 3.03" (77 mm)6.5": 6.12" (156 mm) MOTOR OUTER DIAMETER 2.75": 2.75" (69 mm)6.5": 3.54" (90 mm) Specifications FREE AIR RESONANCE (FS) 1": 1500 Hz2.75": 185 Hz6.5": 52.8Hz ELECTRICAL “Q” (QES) 2.75": 0.7696.5": 0.647 MECHANICAL “Q” (QMS) 2.75": 7.8486.5": 5.076 TOTAL “Q” (QTS) 2.75": 0.7006.5": 0.574 EQUIVALENT COMPLIANCE (VAS) 2.75": 0.0353 cu ft (0.125 L)6.5": 0.532 cu ft (15.069 L) ONE-WAY LINEAR EXCURSION (XMAX; SPECS ARE DERIVED VIA ONE-WAY VOICE COIL OVERHANG METHOD WITH NO CORRECTION FACTORS APPLIED) 2.75": 0.059" (1.50 mm)6.5": 0.148" (3.75 mm) REFERENCE EFFICIENCY (NO) 2.75": 0.1414%6.5": 0.344% MOVING MASS (MMS) 2.75": 4.65 g6.5": 16.42 g MECHANICAL COMPLIANCE (CMS) 2.75": 0.00031 m/N6.5": 0.000581 m/N MAGNETIC STRENGTH (BL) 2.75": 5.03 N/A6.5": 5.186 N/A EFFECTIVE PISTON AREA (SD) 2.75": 3.66 in² (0.00236 m²)6.5": 21.4 in² (0.013807 m²) DC RESISTANCE (RE) 1"/6.5": 3.20 Ω2.75": 3.58 Ω

Read more less