Add-On Amplifier OEM Integration Interface for Select 2002-2015 Amplified Lexus and Toyota Vehicles
Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.
AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time!
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Upgrade solution for factory, fixed level, data-bus controlled sound systems
Everything you need in one box to install your choice of aftermarket amplifier(s)
The time-saving design prevents the need for summing and audio correction devices.
Variable volume, fade, balance, bass, mid, and treble audio settings
Retains Bluetooth, navigation, safety system, and all warning chimes
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid, and treble center frequency selection
Plug-n-play installation with two 20-pin connectors (IE Bus)
Remote sub level controller included
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
Harness (IE Bus)
Bass knob
Knob harness
Manual
Applications
Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. See manual for details.
Toyota vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital.
Lexus vehicles must be equipped with a center channel and a subwoofer in order for the AP4-TY11 to be compatible:
Between 2012-2015 Toyota used two different styles of connectors. In order for the AP4-TY11 to be compatible, the radio must have the 20-pin BHA8113 style connector. Vehicles equipped with the 10 / 6-pin BHA1761 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference
LEXUS
CT 200H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2011-2013
ES 300
ALL TRIM LEVELS
For AmpPRO: With Double DIN Radio
2002-2003
ES 300H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2013-2014
ES 330
ALL TRIM LEVELS
For AmpPRO: With Double DIN Radio
2004-2006
ES 350
ALL TRIM LEVELS
—
2007-2009
ES 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2014
GX 460
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2009-2013
GX 470
ALL TRIM LEVELS
—
2004-2009
HS 250H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2012
IS 250
ALL TRIM LEVELS
—
2006-2009
IS 250
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2013
IS 350
ALL TRIM LEVELS
—
2006-2009
IS 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2013
IS F
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2012
LS 430
ALL TRIM LEVELS
—
2001-2006
RX 330
ALL TRIM LEVELS
—
2004-2006
RX 350
ALL TRIM LEVELS
—
2007-2009
RX 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2015
RX 400H
ALL TRIM LEVELS
—
2006-2008
RX 450H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2015
TOYOTA
4RUNNER
ALL TRIM LEVELS
—
2003-2013
AVALON
ALL TRIM LEVELS
—
2005-2012
AVALON
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2013-2014
CAMRY
ALL TRIM LEVELS
—
2007-2011
CAMRY
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2012-2014
COROLLA
ALL TRIM LEVELS
—
2005-2011
FJ CRUISER
ALL TRIM LEVELS
—
2011-2014
HIGHLANDER
ALL TRIM LEVELS
—
2008-2013
LAND CRUISER
ALL TRIM LEVELS
—
2008
PRIUS
ALL TRIM LEVELS
—
2004-2011
PRIUS
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2012-2015
RAV4
ALL TRIM LEVELS
—
2004-2013
RAV4
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2014
SEQUOIA
ALL TRIM LEVELS
—
2005-2012
SEQUOIA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style radio harness
2013
SEQUOIA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2014
SIENNA
ALL TRIM LEVELS
—
2004-2014
TACOMA
ALL TRIM LEVELS
—
2005-2013
TUNDRA
ALL TRIM LEVELS
—
2005-2013
VENZA
ALL TRIM LEVELS
—
2009-2012
VENZA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2013-2014
Pac Audio AP4-TY11 Manual
Add-On Amplifier OEM Integration Interface for Select 2012-2019 Amplified Lexus and Toyota Vehicles
Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.
AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time!
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Upgrade solution for factory, fixed level, data-bus controlled sound systems
Everything you need in one box to install your choice of aftermarket amplifier(s)
The time-saving design prevents the need for summing and audio correction devices.
Variable volume, fade, balance, bass, mid, and treble audio settings
Retains Bluetooth, navigation, safety system, and all warning chimes
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid, and treble center frequency selection
Plug-n-play installation with two 20-pin connectors (IE Bus)
Remote sub level controller included
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
Harness (IE Bus)
Bass knob
Knob harness
Manual
Applications
Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. See manual for details.
Vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital.
Lexus vehicles equipped with the Mark Levinson system are not compatible.
Lexus vehicles equipped with navigation are not compatible.
Lexus CT200h: Must be equipped with a center channel and a subwoofer
Between 2012-2015 Toyota used two different styles of connectors. In order for the AP4-TY12 to be compatible, the radio must have the 10 / 6-pin BHA1761 style connector. Vehicles equipped with the 20-pin BHA8113 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference.
LEXUS
CT 200H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2014-2017
ES 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
GX 460
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2014-2017
IS 200T
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
IS 250
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2014-2015
IS 300
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
NX 200T
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
NX 300H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
RC 200T
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
RC 300
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
RC 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
RX 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
TOYOTA
4RUNNER
ALL TRIM LEVELS
—
2014-2018
AVALON
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2013-2014
AVALON
ALL TRIM LEVELS
—
2015-2018
CAMRY
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2012-2014
CAMRY
ALL TRIM LEVELS
—
2015-2017
HIGHLANDER
ALL TRIM LEVELS
—
2014-2018
PRIUS
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2012-2015
PRIUS
ALL TRIM LEVELS
—
2016-2017
RAV4
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2014
RAV4
ALL TRIM LEVELS
—
2015-2018
SEQUOIA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness
2013
SEQUOIA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2014
SEQUOIA
ALL TRIM LEVELS
—
2015-2018
SIENNA
ALL TRIM LEVELS
—
2015-2017
TACOMA
ALL TRIM LEVELS
—
2014-2018
TUNDRA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness
2014-2015
TUNDRA
ALL TRIM LEVELS
—
2016-2019
VENZA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2013-2014
VENZA
ALL TRIM LEVELS
—
2015-2016
Pac Audio AP4-TY12 ManualPac Audio AP4-TY12 Technical Bulletin
Add-On Amplifier OEM Integration Interface for Select 2018-2021 Amplified Lexus and Toyota Vehicles
Quickly and seamlessly add aftermarket amplifier(s) for improved audio performance while retaining the factory radio. AmpPRO is a Plug-n-Play solution that plugs into the factory radio harness and provides Front/Rear/Sub RCA outputs (5 Volt RMS) to connect to your aftermarket amplifiers. The AmpPRO design avoids the disappointing results and hassle of interfacing after the factory amplifier.
The harness connects to the radio for easier installation.
Provides variable volume, fade, and balance
Provides bass, mid and treble audio settings
Retains warning chimes and navigation prompts
Retains Bluetooth and telematic audio (if equipped)
Front/Rear/Sub RCA outputs (5 Volt RMS)
Includes sub level controller
Optional TOSLINK optical output (APA-TOS1) sold separately.
Optional speaker connection harness (APH-TY02) sold separately.
Applications
Lexus ES250, ES350, and NX300: Only compatible in models equipped with the 8" screen
Lexus RX350 and RX450: Not compatible in models equipped with navigation
In 2018+ models Toyota used three different styles of connectors on the factory radios. In order for the AP4-TY13 to be compatible, the radio must have the 28 / 10-pin new Toyota style connector. Vehicles equipped with the 20-pin BHA8113 or the 10 / 6 pin BHA1761 style connectors are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference.
LEXUS
ES 250
ALL TRIM LEVELS
2019-2021
ES 350
ALL TRIM LEVELS
2019-2021
NX 300
ALL TRIM LEVELS
2019-2021
RX 350
ALL TRIM LEVELS
2019-2021
RX 450H
ALL TRIM LEVELS
2019-2020
TOYOTA
4RUNNER
ALL TRIM LEVELS
2019-2020
AVALON
ALL TRIM LEVELS
2019-2021
CAMRY
ALL TRIM LEVELS
2018-2021
COROLLA
ALL TRIM LEVELS
2019
HIGHLANDER
ALL TRIM LEVELS
2020-2021
RAV4
ALL TRIM LEVELS
2019-2020
SEQUOIA
ALL TRIM LEVELS
2019-2021
SIENNA
ALL TRIM LEVELS
2018-2020
TACOMA
ALL TRIM LEVELS
2019-2021
TUNDRA
ALL TRIM LEVELS
2020-2021
Pac Audio AP4-TY13 (R.2) Manual
Add-On Amplifier OEM Integration Interface for Select 2007-2022 Amplified Toyota and Lexus Vehicles
Easily add amplifier(s) to Toyota and Lexus factory amplified systems without cutting or modifying the original wiring.Simplify speaker wire connections by using the APH-TY02 speaker connection harness when adding aftermarket amplifier(s) to select Toyota and Lexus vehicles. Featuring OEM quality, factory style plugs, the APH-TY02 quickly and securely plugs into the factory amplifier harness allowing an aftermarket amplifier to be more easily installed. Industry-standard wire colors on the APH-TY02 harness make identifying the factory speakers faster and also ensures proper speaker wiring polarity.
Key Features
Perfect for use with AmpPRO AP4-TY11 or AP4-TY12
EIA standard color-coded wires make identifying factory speaker wires and phase easier
APH-TY02 harness eliminates having to run speaker wire throughout the car
18” Harness length
Applications
2018 Toyota Avalon: Only compatible in models with 11 speaker system
2019-2020 Toyota Avalon: Only compatible in models with the 14 speaker system
LEXUS
CT 200H
ALL TRIM LEVELS
2014-2017
ES 250
ALL TRIM LEVELS
2019-2021
ES 300H
ALL TRIM LEVELS
2013-2020
ES 350
ALL TRIM LEVELS
2013-2021
GS 350
ALL TRIM LEVELS
2013-2020
GS 450H
ALL TRIM LEVELS
2013-2018
GX 460
ALL TRIM LEVELS
2014-2017
IS 200T
ALL TRIM LEVELS
2016-2017
IS 250
ALL TRIM LEVELS
2014-2015
IS 300
ALL TRIM LEVELS
2016-2020
NX 200T
ALL TRIM LEVELS
2015-2017
NX 300
ALL TRIM LEVELS
2019-2021
NX 300H
ALL TRIM LEVELS
2015-2017
RC 200T
ALL TRIM LEVELS
2016-2017
RC 300
ALL TRIM LEVELS
2016-2020
RC 350
ALL TRIM LEVELS
2015-2020
RX 350
ALL TRIM LEVELS
2013-2021
RX 450H
ALL TRIM LEVELS
2016-2021
TOYOTA
AVALON
ALL TRIM LEVELS
2013-2020
CAMRY
ALL TRIM LEVELS
2012-2021
COROLLA
ALL TRIM LEVELS
2019-2021
HIGHLANDER
ALL TRIM LEVELS
2014-2021
LAND CRUISER
ALL TRIM LEVELS
2013-2021
PRIUS
ALL TRIM LEVELS
2012-2021
RAV4
ALL TRIM LEVELS
2013-2021
SIENNA
ALL TRIM LEVELS
2021
TUNDRA
ALL TRIM LEVELS
2007-2013
TUNDRA
ALL TRIM LEVELS
2022
Pac Audio APH-TY02 Manual
Add-On Amplifier OEM Integration Interface for Select 2006-2021 Amplified Lexus and Toyota Vehicles
Easily add amplifier(s) to Toyota and Lexus factory amplified systems without cutting or modifying the original wiring.Simplify speaker wire connections by using the APH-TY04 speaker connection harness when adding aftermarket amplifier(s) to select Toyota and Lexus vehicles. Featuring OEM quality, factory style plugs, the APH-TY04 quickly and securely plugs into the factory amplifier harness allowing an aftermarket amplifier to be more easily installed. Industry-standard wire colors on the APH-TY04 harness make identifying the factory speakers faster and also ensures proper speaker wiring polarity.
Key Features
Perfect for use with AmpPRO AP4-TY11 and AP4-TY12
EIA standard color-coded wires make identifying factory speaker wires and phase easier
APH-TY04 harness eliminates having to run speaker wire throughout the car
18” Harness length
Applications
2018-2020 Toyota Sequoia: Only compatible in models equipped with the 14 speaker system
LEXUS
CT 200H
ALL TRIM LEVELS
2011-2013
ES 350
ALL TRIM LEVELS
2007-2012
GS 350
ALL TRIM LEVELS
2007-2011
GS 450H
ALL TRIM LEVELS
2007-2011
GX 460
ALL TRIM LEVELS
2010-2013
HS 250H
ALL TRIM LEVELS
2010-2012
IS 250
ALL TRIM LEVELS
2006-2013
IS 350
ALL TRIM LEVELS
2006-2013
RX 350
ALL TRIM LEVELS
2008-2012
RX 400H
ALL TRIM LEVELS
2007-2008
RX 450H
ALL TRIM LEVELS
2012
TOYOTA
4RUNNER
ALL TRIM LEVELS
2010-2017
4RUNNER
ALL TRIM LEVELS
2019-2021
AVALON
ALL TRIM LEVELS
2011-2012
LAND CRUISER
ALL TRIM LEVELS
2008-2011
SEQUOIA
ALL TRIM LEVELS
2008-2020
SIENNA
ALL TRIM LEVELS
2011-2020
TACOMA
ALL TRIM LEVELS
2012-2017
VENZA
ALL TRIM LEVELS
2009-2016
Pac Audio APH-TY04 Manual
