Skar-Audio

EVL Series 6-1/2-Inch 200-Watt Subwoofer Driver, 2-Ohm or 4-Ohm Dual Voice Coil The Skar Audio EVL-65 D2 subwoofer was designed to be the most responsive, powerful, and efficient 6.5 inch subwoofer on the market. Don't be fooled by the size, the EVL-65 is one monster of a subwoofer, featuring a 4-layer 2" pure copper voice coil, and a powerful 39 Oz single slug ferrite motor. The small size of this driver allows it to be very versatile, as it can be used in a variety of applications where adding a woofer might not otherwise be possible. Conservatively rated at 200 watts RMS Power, and 400 watts max power, the EVL-65 features an aluminum diecast chassis which utilizes an advanced air flow cooling system to help dissipate heat. The suspension design of this subwoofer is highlighted by its unique yellow spider - which connects to the coil former with premium stitched lead wires. All of these incredible features make the EVL-65 the obvious choice when looking for a versatile 6.5-inch car subwoofer. Specifications Size 6.5" Type Car Subwoofer Cone Type Competition Grade Pressed Paper Cone RMS Power 200 Watts Peak Power 400 Watts Surround Type High Roll Rubber Surround Voice Coil Size 2.00" Magnet Slug Count Single Voice Coil Layers 4 Voice Coil Material Black Coated Copper (Pure Copper) Voice Coil Impedance Dual 2 Ω T/S Parameters Bl 13.0 n/a Fs 61.0 Hz Re Dual 2 Ω Sd 113.0 cm2 Cms 0.126 mm/N Mms 52.8 gr Qes 0.43 Qms 4.48 Qts 0.39 Vas 2.3 L Nref 0.12% Xmax 6.25 mm (one-way) Sensitvity 83.1 dB

Read more less

RP-Series Monoblock Subwoofer Amplifier 350-Watts @ 1-Ohm, 250-Watts @ 2-Ohm, 150W @ 4-Ohm Skar Audio engineered the RP-350.1D Class D monoblock subwoofer amplifier to be dominant in both power and reliability compared to anything else on the market in its class and physical size. Designing the most efficient, well built, high quality amplifiers is where we start here at Skar Audio, and that is exactly what is delivered in this unit. The smallest of all RP series amplifiers, the RP-350.1D is the perfect solution for when you need versatility but are not willing to sacrifice power output. The RP-350.1D is 1-ohm stable and utilizes a wide array premium internal components that make it extremely powerful and reliable - such as its high speed MOSFET power supply and advanced PCB board layout. Conservatively rated at 350 watts RMS power at a 1-ohm load, with the capabilities of reaching beyond 388 watts at max power output. This compact, small footprint amplifier, is by far one of the most affordable monoblocks Skar Audio has ever released, and is great for powering a pair of subwoofers rated around 200 watts RMS each or a single subwoofer around 400 watts RMS. In addition to all of the above features, the 4 gauge power and ground terminals found on the amplifier allow for maximum current flow and therefore higher power output and more efficient operation. Furthermore, you'll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ switch (0, +6, +12dB), and variable adjustment tunings for gain level, low-pass filter, and subsonic filter. Featuring 4-way protection circuitry, you'll have the peace of mind knowing that you are protected against damage to the amplifier for various reasons - including electrical shortage, over heating, low voltage, and more. This amplifier comes with a remote subwoofer level control (bass knob) allowing the user to have full control over their bass from the front of the vehicle. General Specifications Type Monoblock Car Amplifier Class D Bridgeable No Strappable No Fuse Rating 30 Amp MOSFET Type High Speed MOSFET Power Supply Damping Factor 150< Amplifier Width 6.20" Bass EQ (Boost) Yes (0‚+6 dB‚+12 dB) Output Channels 1 RCA Line Output No Turn-On Circuit Soft Turn-on Circuit Working Voltage 8.5V - 16V Amplifier Height 2.25" Amplifier Length 7.54" Subsonic Control Off - 50Hz Tri-Mode Capable No Frequency Response 20Hz - 250Hz RMS Power at 1 Ohm 350 Watts x 1 Channel (14.4v) Peak Power at 1 Ohm 375 Watts x 1 Channel (14.4v) RMS Power at 2 Ohms 250 Watts x 1 Channel (14.4v) RMS Power at 4 Ohms 150 Watts x 1 Channel (14.4v) Efficiency at 4 Ohms 0.9 Protection Built-in? Yes - 4-Way (Thermal‚Voltage‚Speaker‚DC) Power & Ground Inputs 4 Gauge Signal-to-Noise Ratio 85 dB Low Level Input (Gain) 6V - 0.2mV Low Pass Filter (Variable) 50Hz - 220Hz Power & Protection Indicators Yes - LED Indicators Remote Bass Knob & Cable Included Yes Real World Amplifier Dyno Test Results Dynamic (Peak) Power at 1 Ohm 452 Watts x 1 Channel (14.38v) Certified (RMS) Power at 1 Ohm 378 Watts x 1 Channel (14.36v) Skar Audio RP-Series Amplifier Installation Manual

Read more less