10" Driver

Automotive Subwoofer Systems and Accessories with a 10-Inch Driver

Automotive Subwoofer Systems and Accessories with a 10-Inch Driver

22 products

  • JL Audio SB-F-EXPED4G/10TW1 : 10" 300W Subwoofer Enclosure @ 2Ω, 2018-UP Expedition JL Audio SB-F-EXPED4G/10TW1 : 10" 300W Subwoofer Enclosure @ 2Ω, shown installed.

    JL Audio SB-F-EXPED4G/10TW1 : 10" 300W Subwoofer Enclosure @ 2Ω, 2018-UP Expedition

    Pre-Order Today!

    Single 300-Watt 2-Ohm Thin 10-Inch Stealthbox Subwoofer-Enclosure for Select 2018-Up Ford Expedition Vehicles, with OEM Subwoofer Ford's full-sized SUV delivers first-rate comfort with outstanding gear-hauling capability and towing capacity. This is why JL's Stealthbox solution is designed to retain 100% of your cargo space, while delivering first-class bass performance. This model replaces the stock subwoofer and installs discreetly behind the factory cargo area trim to protect and hide its 10-inch subwoofer. The Hard Data: Contains one 10TW1-2 subwoofer in a sealed enclosure. 300 watt power handling. Wired for 2 ohm mono. Installs behind driver side panel in the cargo area. Requires removal of the OEM "subwoofer". Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-F-EXPED4G/10TW1 Installation Manual

    Pre-Order Today!

    $1,399.99

  • JL Audio SB-TE-3G1-10TW1 : 10" 300W 2Ω Thin Subwoofer Enclosure, 2017-UP Tesla Model 3 JL Audio SB-TE-3G1-10TW1 : 10" 300W 2Ω Thin Subwoofer Enclosure, 2017-UP Tesla Model 3, shown installed.

    JL Audio SB-TE-3G1-10TW1 : 10" 300W 2Ω Thin Subwoofer Enclosure, 2017-2023 Tesla Model 3

    Pre-Order Today!

    Single 10-Inch 300-Watt 2-Ohm Subwoofer-Enclosure for Select 2017-2023 Tesla Model-3 Vehicles Tesla’s electric, midsize sedan offers a fun driving experience with athletic handling and remarkable acceleration potential. Unfortunately, the factory audio systems are unable to produce enough bass to match its performance capabilities. Constructed from 100% fiberglass, this Stealthbox houses a 10-inch TW1 thin-line driver in a custom-formed, sealed enclosure. Engineered to address the Model 3’s vault-like, sealed trunk design, this Stealthbox is suspended above the floor, mounted within the rear deck, and generates astonishing amounts of bass output, without sacrificing any precious cargo space.The Hard Data: Contains one 10TW1-2 Subwoofer in a sealed enclosure. 300 watt power handling. Wired for 2 ohm mono. Installs within the rear deck and requires permanent modification to the rear deck and to the interior rear deck panel. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-TE-3G1-10TW1 Installation Manual

    Pre-Order Today!

    $1,299.99

  • JL Audio SB-J-JL4DPAS/10TW1 : 10" 300W 2Ω or 4Ω Thin Subwoofer Enclosure, 2018-2023 Jeep Wrangler JL Unlimited (Passenger Side) JL Audio SB-J-JL4DPAS/10TW1-2 : 10" 300W 2Ω Thin Subwoofer Enclosure, shown installed.

    JL Audio SB-J-JL4DPAS/10TW1 : 10" 300W 2Ω or 4Ω Thin Subwoofer Enclosure, 2018-2023 Jeep Wrangler JL Unlimited (Passenger Side)

    Pre-Order Today!

    10-Inch 300-Watt 2-Ohm or 4-Ohm Thin Subwoofer-Enclosure for Select 2018-2023 Jeep Wrangler-Unlimited, Passenger-Side Combining JL's advanced thin-line subwoofer technology with a form fitting enclosure design, these Stealthbox® systems deliver outstanding sub-bass performance in your 4-door Wrangler, without consuming excess cargo space. Constructed from 100% fiberglass, each Stealthbox® houses a 10TW1 thin-line subwoofer and mounts solidly above each rear wheel well. A matching trim panel and sturdy steel-mesh grille are included, so you can carry plenty of gear without worrying about damage. Separate driver and passenger side Stealthbox® models are available, each with 2 or 4 ohm drivers. The Hard Data: Contains one 10TW1 in a sealed enclosure with 300 watt power handling. Choose from 2 ohm or 4 ohm models, driver or passenger side. Each enclosure installs above one rear wheel well. Black steel mesh grille is included with each. If vehicle is factory-equipped with Premium Audio, passenger side Stealthbox® installation requires removal of OEM “subwoofer” and purchase of interior trim parts from Jeep®. Will not fit any "JK" Jeep® model or 2-Door "JL" models. Soft-top models: Stealthbox® installation does not interfere with normal top operation, except for the final position where the top mechanism is detached from the rails. Jeep Part #CFWLR-74-24 carpet needs to be ordered from jeep to remove the Factor Subwoofer. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-J-JL4DPAS/10TW1-2 Installation Manual

    Pre-Order Today!

    $1,299.99

  • JL Audio SB-J-JL4DDRV/10TW1-2 : 10" 300W 2Ω Thin Subwoofer Enclosure, 2018-2023 Jeep Wrangler JL Unlimited JL Audio SB-J-JL4DDRV/10TW1-2 : 10" 300W 2Ω Thin Subwoofer Enclosure, shown installed.

    JL Audio SB-J-JL4DDRV/10TW1-2 : 10" 300W 2Ω or 4Ω Thin Subwoofer Enclosure, 2018-2023 Jeep Wrangler JL Unlimited (Driver Side)

    Pre-Order Today!

    10-Inch 300-Watt 2-Ohm or 4-Ohm Subwoofer Enclosure for Select 2018-2023 Jeep Wrangler-Unlimited, Driver Side Combining JL's advanced thin-line subwoofer technology with a form fitting enclosure design, these Stealthbox® systems deliver outstanding sub-bass performance in your 4-door Wrangler, without consuming excess cargo space. Constructed from 100% fiberglass, each Stealthbox® houses a 10TW1 thin-line subwoofer and mounts solidly above each rear wheel well. A matching trim panel and sturdy steel-mesh grille are included, so you can carry plenty of gear without worrying about damage. Separate driver and passenger side Stealthbox® models are available, each with 2 or 4 ohm drivers. The Hard Data: Contains one 10TW1 in a sealed enclosure with 300 watt power handling. Choose from 2 ohm or 4 ohm models, driver or passenger side. Each enclosure installs above one rear wheel well. Black steel mesh grille is included with each. If vehicle is factory-equipped with Premium Audio, passenger side Stealthbox® installation requires removal of OEM “subwoofer” and purchase of interior trim parts from Jeep®. Will not fit any "JK" Jeep® model or 2-Door "JL" models. Soft-top models: Stealthbox® installation does not interfere with normal top operation, except for the final position where the top mechanism is detached from the rails. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-J-JL4DDRV/10TW1-2 Installation Manual

    Pre-Order Today!

    $1,299.99

  • JL Audio SB-J-JK2DR/10W1v3/BK : 10" 300W 2Ω Subwoofer Enclosure, cutaway view. JL Audio SB-J-JK2DR/10W1v3/BK : 10" 300W 2Ω Subwoofer Enclosure, shown installed.

    JL Audio SB-J-JK2DR/10W1v3 : 10" 300W 2Ω Subwoofer Enclosure, 2007-2017 Jeep Wrangler (JK 2-Door)

    Pre-Order Today!

    10-Inch 2-Ohm 300-Watt Subwoofer Enclosure for Select 2007-2017 Jeep Wrangler (JK) 2-Door with Black-Interior The original American off-road machine is made for getting dirty and finding places that nothing else with four wheels and four seats can reach, but it's not really made for great bass. Let's see what we can do about that. This low-profile Stealthbox® system sits inconspicuously on the cargo-area floor and features a rigid, carpet-covered, removable panel that conceals a powerful 10-inch subwoofer driver and a secure mounting place for a JL Audio amplifier (sold separately). The subwoofer driver is housed in a sealed, carpet-covered fiberglass enclosure. The entire structure is designed to be easily installed and removed when the tailgate is opened, so you can choose to remove it if you plan to get your Jeep really filthy or need the extra space. The Hard Data: Contains one 10W1v3-2 subwoofer in a sealed enclosure. 300 watt power handling. Wired for 2 ohm mono. Installs on floor of the rear cargo area. Floor of cargo area is raised approximately 5 inches with installation. Will not affect rear seat-folding functionality. Cannot be used without the factory tailgate in place.  Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-J-JK2DR/10W1v3 Installation Manual

    Pre-Order Today!

    $1,249.99

  • JL Audio SB-TE-YG1-10TW1 : 10" 300W 2Ω Thin Subwoofer Enclosure, 2020-UP Tesla Model Y JL Audio SB-TE-YG1-10TW1 : 10" 300W 2Ω Thin Subwoofer Enclosure, 2020-UP Tesla Model Y, shown installed.

    JL Audio SB-TE-YG1-10TW1 : 10" 300W 2Ω Thin Subwoofer Enclosure, 2020-UP Tesla Model Y

    Pre-Order Today!

    Single 10-Inch 300-Watt Subwoofer-Enclosure for Select 2020-Up Tesla Model-Y Vehicles Tesla’s popular compact crossover delivers quick acceleration and a roomy cabin with plenty of space for both passengers and cargo. Sadly though, the factory audio options offer very little to satisfy in the bass reproduction department. Featuring an all-fiberglass, custom-formed, sealed enclosure, this Stealthbox houses JL Audio's innovative, 10-inch TW1 thin-line subwoofer. Designed to drop into the driver’s side, rear storage compartment, this Stealthbox solution produces amazing amounts of deep bass output, while practically vanishing into its surroundings.The Hard Data: Contains one 10TW1-2 Subwoofer in a sealed enclosure. 300 watt power handling. Wired for 2 ohm mono. Fits two-row, 5-seat vehicles only. Use of driver's side, rear storage compartment is lost with installation. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-TE-YG1-10TW1 Installation Manual

    Pre-Order Today!

    $1,199.99

  • JL Audio SB-GM-4GSUVCNSL/10TW1 : 10" Thin 300W Subwoofer Enclosure, cutaway view. JL Audio SB-GM-4GSUVCNSL/10TW1 : 10" Thin 300W Subwoofer Enclosure @ 2Ω, 2015-2020 Escalade Suburban Tahoe Yukon (with Bucket Seats)

    JL Audio SB-GM-4GSUVCNSL/10TW1 : 10" Thin 300W Subwoofer Enclosure @ 2Ω, 2015-2020 Escalade Suburban Tahoe Yukon (with Bucket Seats)

    Pre-Order Today!

    Single 10-Inch Thin 300-Watt Subwoofer-Enclosure for Select 2015-2020 Cadillac-Escalade, Chevy-Suburban, Chevy-Tahoe and GMC-Yukon Vehicles, with front bucket-seats and factory center-console The fourth generation full-size SUV from GM gets all-new, luxurious interiors, along with major enhancements in performance and technology. Unfortunately, the stock audio systems continue a track record of weak bass reproduction. There also isn’t much room for a conventional subwoofer design, without compromising people and cargo space. To neatly solve this problem, JL's engineers have designed a subwoofer solution that installs invisibly, inside the factory console, with zero loss of console storage space. Featuring 100% fiberglass construction, this Stealthbox® is equipped with a down-firing 10-inch TW1 thin-line subwoofer in a sealed enclosure design. The Hard Data: Contains one 10TW1-2 in a sealed enclosure. 300 watt power handling. Wired for 2 ohm mono. Stealthbox® installs inside forward-most portion of front center console, without affecting storage space or cup holders. Replaces the OEM “subwoofer” system, if vehicle is so equipped. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-GM-4GSUVCNSL/10TW1 Installation Manual

    Pre-Order Today!

    $1,149.99

  • JL Audio SB-F-RNGSCG4/10TW1 : 10" 300W Subwoofer Enclosure @ 2Ω, 2019-2023 Ford Ranger JL Audio SB-F-RNGSCG4/10TW1 : 10" 300W Subwoofer Enclosure @ 2Ω, installed.

    JL Audio SB-F-RNGSCG4/10TW1 : 10" 300W Subwoofer Enclosure @ 2Ω, 2019-UP Ford Ranger (SuperCrew Cab)

    Pre-Order Today!

    Single 10-Inch 2-Ohm 300-Watt Subwoofer-Enclosure for Select 2019-UP Ford-Ranger SuperCrew Vehicles Ford's mid-sized pickup promises practical utility and performance for everyday commutes or rugged terrains. To make every drive even more enjoyable, JL-Audio's Stealthbox solution tucks under the rear seat on the passenger side and encloses a 10-inch driver for impressive sub-bass performance. Seat folding is unaffected with plenty of room remaining on the driver side for storage. Best of all, the Stealthbox virtually disappears once installed. The Hard Data: Contains one 10TW1-2 subwoofer in a sealed enclosure. 300 watt power handling. Wired for 2 ohm mono. Installs under passenger side rear seat in place of storage compartment. Will not fit SuperCab. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-F-RNGSCG4/10TW1 Manual

    Pre-Order Today!

    $1,099.99

  • JL Audio SB-GM-3GSLVCNSL/10TW1 : 10" Thin 300W Subwoofer Enclosure, cutaway view. JL Audio SB-GM-3GSLVCNSL/10TW1 : 10" Thin 300W Subwoofer Enclosure, shown installed.

    JL Audio SB-GM-3GSLVCNSL/10TW1 : 10" Thin 300W Subwoofer Enclosure @ 2Ω, 2014-2018 Silverado, Sierra (Front Bucket Seats)

    Pre-Order Today!

    Single 10-Inch 2-Ohm Thin 300-Watt Subwoofer-Enclosure for Select 2014-2018 Chevrolet-Silverado and GMC-Sierra Pickups, with Front Bucket-Seats and Factory-Console GM’s third generation Silverado/Sierra gets a full redesign with a variety of enhancements including engine and technology upgrades. Regrettably, the factory audio systems still come up short when it comes to bass reproduction. Designed to invisibly install in the factory console, this Stealthbox® adds impressive, high-quality bass, with zero loss of passenger space, storage space, or utility. The only thing you lose is that weak factory bass performance. Featuring 100% fiberglass construction, this Stealthbox® is equipped with a down-firing 10-inch TW1 thin-line subwoofer in a sealed enclosure design. The Hard Data: Contains one 10TW1-2 in a sealed enclosure. 300 watt power handling. Wired for 2 ohm mono. Stealthbox® installs inside forward-most portion of front center console, without affecting storage space or cup holders. Replaces the OEM “subwoofer” system, if vehicle is so equipped. Will not fit trucks equipped with eAssist powertrain. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-GM-3GSLVCNSL/10TW1 Installation Manual

    Pre-Order Today!

    $1,099.99

  • JL Audio SB-J-WRUP/10TW1-2 : 10" 300W 2Ω Thin Subwoofer Enclosure, 2007-2018 Jeep Wrangler Unlimited Passenger Side JL Audio SB-J-WRUP/10TW1-2 : 10" 300W 2Ω Thin Subwoofer Enclosure, shown installed.

    JL Audio SB-J-WRUP/10TW1 : 10" 300W 2Ω or 4Ω Thin Subwoofer Enclosure, 2007-2017 Jeep Wrangler Unlimited (Passenger Side)

    Pre-Order Today!

    Single 10-Inch 300-Watt 2-Ohm or 4-Ohm Thin Subwoofer-Enclosure for Select 2007-2017 Jeep-Wrangler Unlimited, Passenger Side Whether your adventures are urban, suburban or on the roughest trails... these Stealthbox® systems for the 4-door Wrangler Unlimited will make them all more exciting. These systems are designed to provide powerful, audiophile bass quality without significantly compromising precious cargo space. JL's patented, low-profile thin line subwoofer technology extracts amazing bass from very thin enclosures that bolt solidly above each rear wheel well. Rugged, 100% fiberglass construction is as tough as your Jeep® and sturdy steel-mesh grilles mean you can still toss all your gear in the back without worrying about damage. Because Jeep® owners customize their vehicles in all kinds of creative ways, the driver side and passenger side Stealthbox® systems are sold individually. A single one is enough for most people to be very happy, but you can go for two if maximum performance is your goal. The Hard Data: Each system contains one 10TW1 in a sealed enclosure with 300 watt power handling. Each enclosure is wired for 2 or 4-ohms. A steel mesh grille is included with each to protect the Subwoofer. Each enclosure installs above one rear wheel well, with specific models for passenger and driver side. Does not affect hard top installation. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-J-WRUP/10TW1-2 Installation Manual

    Pre-Order Today!

    $1,099.99

  • JL Audio SB-J-WRUD/10TW1-2 : 10" 300W 2Ω Thin Subwoofer Enclosure, 2007-2017 Jeep Wrangler JK Unlimited Driver Side JL Audio SB-J-WRUD/10TW1-2 : 10" 300W 2Ω Thin Subwoofer Enclosure, shown installed.

    JL Audio SB-J-WRUD/10TW1 : 10" 300W 2Ω or 4Ω Thin Subwoofer Enclosure, 2007-2017 Jeep Wrangler JK Unlimited (Driver Side)

    Pre-Order Today!

    Single 10-Inch 300-Watt 2-Ohm or 4-Ohm Thin Subwoofer-Enclosure for Select 2007-2017 Jeep-Wrangler JK-Unlimited with Black-Trunk, Driver Side Whether your adventures are urban, suburban or on the roughest trails... these Stealthbox® systems for the 4-door Wrangler Unlimited will make them all more exciting. These systems are designed to provide powerful, audiophile bass quality without significantly compromising precious cargo space. JL Audios patented, low-profile thinline subwoofer technology extracts amazing bass from very thin enclosures that bolt solidly above each rear wheel well. Rugged, 100% fiberglass construction is as tough as your Jeep® and sturdy steel-mesh grilles mean you can still toss all your gear in the back without worrying about damage. Because Jeep® owners customize their vehicles in all kinds of creative ways, the driver side and passenger side Stealthbox® systems are sold individually. A single one is enough for most people to be very happy, but you can go for two if maximum performance is your goal. The Hard Data: Each system contains one 10TW1 in a sealed enclosure with 300 watt power handling. Each enclosure is wired for 2 or 4 ohms. A steel mesh grille is included with each to protect the subwoofer driver. Each enclosure installs above one rear wheel well, with specific models for passenger and driver side. Does not affect hard top installation. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-J-WRUD/10TW1-2 Installation Manual

    Pre-Order Today!

    $1,099.99

  • JL Audio SB-GM-VETC6/10W1v3 : 10" 300W 2Ω Subwoofer Enclosure, 2005-2013 C6 Corvette JL Audio SB-GM-VETC6/10W1v3 : 10" 300W 2Ω Subwoofer Enclosure, shown installed.

    JL Audio SB-GM-VETC6/10W1v3 : 10" 300W 2Ω Subwoofer Enclosure, 2005-2013 C6 Corvette

    Pre-Order Today!

    10-Inch 2-Ohm 300-Watt Subwoofer-Enclosure for Select 2005-2013 Chevrolet C6-Corvette The sixth-generation Corvette is an amazing performance car but it can definitely benefit from a major upgrade in the low-frequency department. This Stealthbox® tucks neatly into the rear corner of the hatch and uses the storage pocket space to gain volume without taking up much hatch space and without interfering with targa top stowage. The Hard Data: Contains one 10W1v3-2 in a sealed enclosure. 300 watt power handling. Wired for 2 ohm mono. Installs in driver-side corner of the hatch. A steel mesh grille is included to protect the subwoofer driver. Does not affect storage of Targa Top or access to fuel door and emergency door release. Will not fit convertible or ZR-1 models. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-GM-VETC6/10W1v3 Installation Manual

    Pre-Order Today!

    $1,099.99

  • JL Audio SB-GM-TAHOCNSL/10W1v3 : 10" 300W 2Ω Subwoofer Enclosure, cutaway view. JL Audio SB-GM-TAHOCNSL/10W1v3 : 10" 300W 2Ω Subwoofer Enclosure, shown installed.

    JL Audio SB-GM-TAHOCNSL/10W1v3 : 10" 300W 2Ω Subwoofer Enclosure, 2007-2013 Chevy, GMC (Bucket Seats and Factory Console)

    Pre-Order Today!

    10-Inch 2-Ohm 300-Watt Subwoofer-Enclosure for Select 2007-2013 Chevrolet and GMC Full-Size SUV’s or Trucks with Front-Bucket-Seats This generation of GM's big trucks and SUV's sets new standards for interior quality and luxury. There also isn't much wasted space in which to install a conventional subwoofer design without giving up cargo and people space. JL's Stealthbox® solution installs inside the forward section of the factory center console for complete invisibility. Intense, up-front bass is produced by a down-firing 10-inch subwoofer in a sealed enclosure. The console's functionality and storage space is unaffected by the Stealthbox®. The Hard Data: Contains one 10W1v3-2 in a sealed enclosure. 300 watt power handling. Wired for 2 ohm mono. Stealthbox® installs inside forward-most portion of front center console and replaces the OEM “subwoofer” system, if vehicle is so equipped. Will not fit Trucks with AC vents on the back of the center console or vehicles with deep storage area in front of cup holders. Will not fit Full-Size “Classic” Trucks, Chevrolet SSR, Cadillac Escalade, Cadillac Escalade ESV, Cadillac Escalade EXT, Hummer H2, Hummer H2 SUT. Applications  CHEVROLET Avalanche 2007-2013 Silverado 1500, 2500 HD, 3500 HD 2007-2013 Suburban 2007-2013 Tahoe 2007-2013 Yukon 2007-2013 Yukon XL 2007-2013 GMC Sierra 1500, 2500 HD, 3500 HD 2007-2013 Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-GM-TAHOCNSL/10W1v3 Installation Manual

    Pre-Order Today!

    $999.99

  • JL Audio CP110LG-TW1-2 : 10" Thin Subwoofer Enclosure - 300W RMS 2Ω Ported JL Audio CP110LG-TW1-2 : 10" Thin Subwoofer Enclosure - 300W RMS 2Ω Ported, side view.

    JL Audio CP110LG-TW1-2 : 10" Thin Subwoofer Enclosure, 300W RMS 2Ω Ported

    Pre-Order Today!

    MicroSub-Series 10-Inch 300-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 10TW1 subwoofer driver into an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 75 - 300WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 2 Ω Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 20.875 in / 530 mm External Height (H) 13.25 in / 337 mm External Depth (D1) 6.375 in / 162 mm Net Weight 25.70 lb / 11.66 kg JL Audio CP110LG-TW1-2 Brochure

    Pre-Order Today!

    $649.99

  • Alpine SBV-10-WRA : 10" 350W 2Ω Sub Box for Wrangler JK Unlimited 2007-2018, bottom side. Alpine SBV-10-WRA : 10" 350W 2Ω Sub Box for Wrangler JK Unlimited 2007-2018, installed under passenger front seat.

    Alpine SBV-10-WRA : 10" 350W 2Ω Sub Box, 2007-2018 Wrangler JK Unlimited

    Pre-Order Today!

    Alpine 350-Watt Loaded 10-Inch Subwoofer-Enclosure for 2007-2018 Jeep-Wrangler JK-Unlimited, 2Ω Final Impedance When you have a Wrangler, you don’t have extra space to spare. Alpine engineered the SBV-10-WRA to conveniently fit under the front passenger’s seat making efficient use of space. The SBV-10-WRA is a custom-shaped enclosure that fits snugly under the seat frame, so no mounting hardware is required. (NOTE: designed for fitment in Jeeps with the factory carpet. Fitment is not guaranteed with aftermarket or removed carpet) Enjoy impactful bass, with your Wrangler’s top on or off. The SBV-10-WRA loads the lower frequency sound into the passenger’s foot well to deliver quality sound and maximized bass extension at all times, so your music continues even when the asphalt ends. Specifications 10” Pre-loaded Sealed Custom-fit Enclosure Weather Resistant (IP66 rating) Power Handling: 350WRMS/1050W Peak Nominal Impedance 2Ω Frequency Response: 45-200Hz OEM-grade Molex 2-pin connector w/pigtail wire harness Alpine SBV-10-WRA Manual

    Pre-Order Today!

    $419.99

  • 300W 10" Thin Subwoofer Driver, 2Ω or 4Ω Single Voice Coil : JL Audio 10TW1 300W 10" Thin Subwoofer Driver, 2Ω or 4Ω Single Voice Coil : JL Audio 10TW1, side view.

    JL Audio 10TW1 : 300W 10" Thin Subwoofer Driver, 2Ω or 4Ω Single Voice Coil

    Pre-Order Today!

    10-Inch 300-Watt Subwoofer Driver, 2-Ohm or 4-Ohm SVC The JL Audio 10" TW1 automotive thin subwoofer driver chassis offers a shallow mounting depth and excellent linear excursion capability while requiring a small enclosure (0.35 cu.ft. / 10 liters). The cast alloy frame design on the JL 10TW1 is capable of operating in very tight spaces like under-seat installations in trucks. The 10TW1 design uses a "concentric tube" structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs. The 10TW1 thin subwoofer also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame's dimensions. Thanks to this feature, the 10TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth. Although the JL Audio 10TW1-2  and 10TW1-4 thin subwoofer drivers are optimized for an enclosure much smaller than most other 10 inch subwoofer drivers, they never sound like a big woofer struggling in a tiny box...instead, the 10TW1's delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system. Very shallow mounting depth (4.36 in / 111 mm) No pole vent: permits mounting close to rear wall of enclosure Extremely small sealed enclosure volume requirements Long linear excursion capability (0.40 in / 10 mm, one-way) DMA-optimized motor design Patented "concentric tube" architecture Patented "floating cone attach method" technology Cast alloy frame with flat edges for tight driver grouping Injection molded, mica-filled polypropylene cone Rubber surround Steel mesh grille included with each driver Precision-built in USA at JL Audio’s Miramar, Florida factory with global components General Specifications Continuous Power Handling 300W RMS Recommended Amplifier Power 75W - 300W RMS Nominal Impedance 2Ω/4Ω JL Audio 10TW1 Manual

    Pre-Order Today!

    $399.99

  • JL Audio CP210-W0v3 : Dual 10" Subwoofer Enclosure - 600W RMS 2Ω Ported JL Audio CP210-W0v3 : Dual 10" Subwoofer Enclosure - 600W RMS 2Ω Ported, back side.

    JL Audio CP210-W0v3 : Dual 10" Subwoofer Enclosure, 600W RMS 2Ω Ported

    Pre-Order Today!

    BassWedge-Series Dual 10-Inch 600-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofers to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofers firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 150 - 600WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 600 W System Nominal Impedance 2 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No Physical Specifications External Width (W) 29.61 in / 752 mm External Height (H) 13.77 in / 350 mm External Depth (D1) 17.38 in / 441 mm External Top Surface Depth (D2) 14 in / 356 mm Net Weight 50.7 lb / 23 kg JL Audio CP210-W0v3 Brochure

    Pre-Order Today!

    $299.99

  • Last One! 300W 10" Subwoofer Driver, 2Ω or 4Ω Single Voice Coil : JL Audio 10W1v3 300W 10" Subwoofer Driver, 2Ω or 4Ω Single Voice Coil : JL Audio 10W1v3, side view.

    JL Audio 10W1v3 : 300W 10" Subwoofer Driver, 2Ω or 4Ω

    1 Available for pickup

    W1-Series 10-Inch 300-Watt Subwoofer Driver, 2-Ohm or 4-Ohm SVC The JL Audio 10" W1v3 subwoofer driver is a very suitable option when space is limited with smaller amplifiers. It features a low mounting depth of 4.6 inches and a compact motor structure that allows it to comfortably fit in tight mounting locations. There is no pole vent on the rear of the subwoofer which allows the motor structure to be placed directly against an enclosure boundary.  Excellent excursion capability and linearity allow the 10W1v3 to reproduce sub-bass with shocking extension and quality. The JL Audio 10W1v3 is best used with an amplifier in the 75W - 300W RMS range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure. General Specifications Continuous Power Handling 300W RMS Recommended Amplifier Power 75W - 300W RMS Nominal Impedance 2Ω/4Ω JL Audio 10W1v3 Manual

    1 Available for pickup

    $229.99

  • JL Audio CP110-W0v3 : 10" Subwoofer Enclosure - 300W RMS 4Ω Ported JL Audio CP110-W0v3 : 10" Subwoofer Enclosure - 300W RMS 4Ω Ported, back side.

    JL Audio CP110-W0v3 : 10" Subwoofer Enclosure, 300W RMS 4Ω Ported

    2 Available for pickup

    BassWedge-Series 10-Inch 300-Watt Enclosed Subwoofer System, 4Ω Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 75 - 300WNominal Impedance: 4 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No Physical Specifications External Width (W) 15.51 in / 394 mm External Height (H) 13.77 in / 350 mm External Depth (D1) 17.38 in / 441 mm External Top Surface Depth (D2) 14 in / 356 mm Net Weight 29 lb / 13.15 kg JL Audio CP110-W0v3 Brochure

    2 Available for pickup

    $199.99

  • 300W 10" Thin Subwoofer Enclosure, 2Ω Configuration : Kicker 44TCWC102 300W 10" Thin Subwoofer Enclosure, 2Ω Configuration : Kicker 44TCWC102 front side view.

    Kicker 44TCWC10 : 300W 10" Thin Subwoofer Enclosure, 2Ω or 4Ω Configuration

    Pre-Order Today!

    10-Inch 300-Watt Thin Subwoofer Enclosure, 2-Ohm or 4-Ohm Final Impedance This CompC 10" thin loaded loaded sub box is custom-sized to optimize subwoofer performance. This enclosure can fit under or behind a rear seat, has heavy MDF construction, is covered in black carpet with yellow embroidery, and comes with spring loaded speaker terminals for an easy connection of your subwoofer wire.  These thin 44TCWC102 and 44TCWC104 10-inch enclosure works best with 300 watts of RMS amplified power. Specifications Subwoofer (in, cm) 10, 25 Impedance (Ohms) 2, 4 Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 Sensitivity (dB 1w/1m) 93.8 Box Top Depth (in, cm) 4,10.2 Box Bottom Depth (in, cm) 7 5/8, 19.4 Box Height (in, cm) 15, 38.1 Box Width (in, cm) 21 1/2, 54.6 Kicker CompC Subwoofer Enclosure Manual

    Pre-Order Today!

    $179.99

  • 300W 10" Subwoofer Driver, 4Ω Single Voice Coil : JL Audio 10W0v3 300W 10" Subwoofer Driver, 4Ω Single Voice Coil : JL Audio 10W0v3, side view.

    JL Audio 10W0v3 : 300W 10" Subwoofer Driver, 4Ω Single Voice Coil

    2 Available for pickup

    W0-Series 10-Inch 300-Watt Subwoofer Driver, 4-Ohm SVC The JL Audio 10" W0v3 subwoofer driver is a rugged performer with excellent excursion capability and linearity while sporting a 2 inch diameter voice coil and JL's patented Elevated Frame Cooling design for enhanced power handling and reliability. This 10 inch subwoofer is best used with an amplifier in the 75W - 300W range and is optimized to operate in a compact 0.65 cu. ft. (18.4 l) sealed enclosure, or a 1.125 cu. ft. (31.9 l) ported enclosure. General Specifications Continuous Power Handling (RMS) 300W RMS Recommended Amplifier Power (RMS) 75W - 300W RMS Nominal Impedance (Znom) 4Ω JL Audio 10W0v3 Manual

    2 Available for pickup

    $129.99

  • 300W 10" Subwoofer Driver, 4Ω Single or Dual Voice Coil : Kicker 44CWC 300W 10" Subwoofer Driver, 4Ω Single or Dual Voice Coil : Kicker 44CWC, side view.

    Kicker 44CWC : 300W 10" Subwoofer Driver, 4Ω Single or Dual Voice Coil

    Pre-Order Today!

    10-Inch 300-Watt Subwoofer Driver, 4-Ohm SVC or 4-Ohm DVC This CompC 10" sub driver from Kicker has a thick stamped steel basket that holds an injection-molded polypropylene cone with stabilizing ribs in the surround. The 44CWCS104 and 44CWCD104 10-Inch subs are available in a 4Ω Single Voice or 4Ω Dual Voice coil design with spring loaded speaker terminals. These CompC drivers are rated for 300W RMS of amplified power. Specifications Size (IN.,CM) 10, 25 Impedance (OHMS) 4 SVC or 4 DVC Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 500 Sensitivity (dB 1w/1m) 86.2 Frequency Response (Hz) 30-500 Mounting Depth (in, cm) 4 13/16, 12.2 Mounting Cutout (in, cm) 9 1/8, 23.1 Min Sealed Box Vol (cu. ft, L) 1.0, 28.3 Max Sealed Box Vol (cu. ft, L) 2.4, 68 Min Vented Box Vol (cu. ft, L) 1.25, 35.4 Max Vented Box Vol (cu. ft, L) 1.75, 49.6 Kicker CompC Subwoofer Manual

    Pre-Order Today!

    $109.99

Login

Forgot your password?

Don't have an account yet?
Create account