6.5" Driver

Alpine R2-Series 100-Watt RMS 3-Way Component 6-1/2-Inch Aftermarket Door Speakers Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status systems, the Next-Generation R-Series Speakers are Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This ultra-wide bandwidth brings music even closer to the original source while the classic R-Series design maintains the “loud and fun” performance quality that long-time fans have come to enjoy. The Next-Generation R-Series speakers now come in upgraded 'Pro' models in addition to the standard model lineup. The pro models utilize a highly rigid, die-cast aluminum basket that eliminates flexing and resonance during playback to ensure the highest quality sound performance. The new lightweight and rigid glass fiber-reinforced cone material allows for extreme movement and low distortion which results in an incredibly accurate and clean sound during playback. The Next-Generation R-Series speakers utilize a ferrite magnet, different from the neodymium from previous generations, and a larger motor structure that contributes to more mid-bass during the playback. Despite the larger motor structure, the speakers still maintain the same depth for easy installation. Continuing with the Next-Generation R-Series speaker line is Alpine-exclusive High Amplitude Multi-Roll (HAMR) surround technology that increased excursions while maintaining linearity for more accurate music reproduction. Magnesium, hard-dome tweeters contribute to the “loud and fun” R-series sound signature and feature a swivel- mount design for optimal listening positioning and threaded removable housing for flexible factory applications. The Next-Generation R-Series speaker line offers two pathways for performance: the “Pro” and “Standard” models. The R2-S65C is a standard component speaker set that includes a 6.5” Mid-Range and 1” Tweeter with a flexible in-line crossover network that simplifies installation. Sold as a pair. Features Hi-Res Audio Certified Glass Fiber Reinforced Cone  Die-Cast Aluminum Basket  Ferrite Magnet Structure  High-Amplitude Multi-Roll (H.A.M.R.) Surround  2 Premium-Grade Full Passive Performance Crossover Networks   Magnesium Hard-Dome Tweeters with Swivel Mount Design and Threaded Removable Housing  Protective Open Mesh Grille Pair Included   Specifications   6.5” Mid-Bass with 1” Tweeter Frequency Response: 65Hz -40kHz  Power Handling: 100W RMS / 300W Peak

Read more less

C6-Series 6.5-Inch 100-Watt 3-Way Component Audiophile Speaker System Pairing a full-frame 6.5-inch woofer with a 1-inch silk dome tweeter, the C6 series offers advanced sound technology for an exceptional car audio listening experience. When purchased as a component system, premium passive crossover networks are included with the speakers. Proprietary motor, suspension and cone modeling systems are employed, resulting in reduced distortion, improved transient performance and stellar sound quality. The woofer’s center cap is designed to optimize its high-frequency response for seamless tweeter transition. An edge-driven pure silk dome tweeter design, when paired with the C6 woofer, produces sparkling detail with excellent off-axis response and damping for balanced coverage in your listening environment. An automatic, solid-state tweeter protection circuit minimizes the possibility of tweeter failure. Included with each C6 component system, these premium filter networks offer 4 levels of tweeter adjustment. The three-way component system includes an additional 4 levels of midrange adjustment. All incorporate polyester film and electrolytic capacitors as well as low-loss air-core inductors — all accessible beneath a protective polycarbonate cover. Benefiting from years of woofer design experience, the robust JL Audio 6.5-inch C6 component speakers feature purpose-engineered cast-alloy frames outfitted with our Elevated Frame Cooling technology. On a wide range of car audio applications, the C6 speaker system delivers superb sound when powered by an amplifier in the 25- to 150-watt range. The woofer’s oversized voice coil offers extended power handling capability while minimizing thermal compression and distortion at higher volume levels. Speakers are sold as a pair. General Specifications SIZES 6.5" CONTINUOUS POWER HANDLING (RMS) 100 W SENSITIVITY (SPL @ 1 W/1 M) 2.75": 83.50 dB6.5": 87.37 dB SENSITIVITY (SPL @ 1 W/0.5 M) 1": 96 dB SENSITIVITY (SPL @ 2.83 V/1 M) 2.75": 86.50 dB6.5": 90.33 dB FREQUENCY RESPONSE (+/- 3 DB) 53 Hz-21 KHz NOMINAL IMPEDANCE 4 Ω RECOMMENDED AMPLIFIER POWER (RMS) 25-150 W/Channel VOICE COIL DIAMETER 2.75": 0.8" (20.5 mm)6.5": 1.27" (32 mm) CONE MATERIAL Vacuum-formed, mineral-filled polypropylene TWEETER TYPE Silk Dome TWEETER SIZE 1" (25 mm) GRILLE(S) INCLUDED WARRANTY 1 year Mounting Dimensions FRAME OUTER DIAMETER 2.75": 2.52" (77 mm)6.5": 6.5" (165 mm) MOUNTING DEPTH CLEARANCE 2.75": 1.42" (36 mm)6.5": 2.60" (66 mm) FRONTAL GRILLE PROTRUSION 2.75": 0.47" (12 mm)6.5": 1" (25 mm) MOUNTING HOLE 2.75": 2.52" (64 mm)6.5": 5.46" (139 mm) GRILLE TRAY OUTER DIAMETER 2.75": 3.58" (91 mm)6.5": 6.76" (172 mm) BOLT HOLE CIRCLE 2.75": 3.03" (77 mm)6.5": 6.12" (156 mm) MOTOR OUTER DIAMETER 2.75": 2.75" (69 mm)6.5": 3.54" (90 mm) Specifications FREE AIR RESONANCE (FS) 1": 1500 Hz2.75": 185 Hz6.5": 52.8Hz ELECTRICAL “Q” (QES) 2.75": 0.7696.5": 0.647 MECHANICAL “Q” (QMS) 2.75": 7.8486.5": 5.076 TOTAL “Q” (QTS) 2.75": 0.7006.5": 0.574 EQUIVALENT COMPLIANCE (VAS) 2.75": 0.0353 cu ft (0.125 L)6.5": 0.532 cu ft (15.069 L) ONE-WAY LINEAR EXCURSION (XMAX; SPECS ARE DERIVED VIA ONE-WAY VOICE COIL OVERHANG METHOD WITH NO CORRECTION FACTORS APPLIED) 2.75": 0.059" (1.50 mm)6.5": 0.148" (3.75 mm) REFERENCE EFFICIENCY (NO) 2.75": 0.1414%6.5": 0.344% MOVING MASS (MMS) 2.75": 4.65 g6.5": 16.42 g MECHANICAL COMPLIANCE (CMS) 2.75": 0.00031 m/N6.5": 0.000581 m/N MAGNETIC STRENGTH (BL) 2.75": 5.03 N/A6.5": 5.186 N/A EFFECTIVE PISTON AREA (SD) 2.75": 3.66 in² (0.00236 m²)6.5": 21.4 in² (0.013807 m²) DC RESISTANCE (RE) 1"/6.5": 3.20 Ω2.75": 3.58 Ω

Read more less

Alpine HDZ-Slim-Series 100-Watt RMS Hi-Resolution Aftermarket 6-1/2-Inch 3-Way Component Door Speaker System Using expertise gleaned from over five decades of crafting premium car audio products and trickle-down engineering and design from the Ultra Hi-Res AlpineF#1Status system technologies, the Alpine Status system features exceptional tooling and rich build quality for the best possible sound reproduction. Each component was hand-picked from the highest-quality materials for the highest in-class audio performance, that when used as a complete system, can achieve 192kHz/24bit playback. Drawing inspiration from the AlpineF#1Status system, the HDZ-653S features a unified carbon composite cone construction throughout the speaker components for a unified timbre identity. Alpine Proprietary Double Gathered Edge Surround technology gives the speakers ultra-low distortion and linear diaphragm movement that reproduces music true to the artist’s original intentions. Custom developed for Hi-Res Audio Playback, the HDZ-653S has an ultra-wide bandwidth of 55Hz-40kHz which is perfectly suited for accurate reproduction of even the highest quality of studio recordings. Each speaker component is designed to cover a wider range of playback spectrum giving the tuner a wider range of adjustability. The Alpine Status speaker line features two fitments for flexible installation options including a custom-fix model for custom applications and factory-fit models that were intentionally designed to fit into most factory speaker holes without custom work. The HDZ-653S is a custom-fit model that includes a 6.5- inch Mid-Bass driver, a 3.5-inch Midrange driver, and 1.25-inch High-Range driver. The Alpine Status System is sold separately and can be used to build a custom sound system. Three sets of true 4V preamp outputs are included to add additional amplifiers if more power is needed. For best results, install the complete Alpine Status system together as a full system to achieve the highest in-class audio performance only second to the Ultra High-Resolution AlpineF#1System. Features Hi-Res Audio Playback (192kHz/24Bit) w/full Alpine Status system Carbon Composite Diaphragm Material  Alpine Proprietary Double Gathered Edge Surround  6.5” Mid-Bass Driver (16.5cm) 3.5" Midrange Driver (8.5cm) 1.25” High Range Driver (3.2cm) Specifications 100W RMS 300W Peak Power Handling  Frequency response: 55Hz – 40kHz Sensitivity: 88dB Sold by the Pair Alpine HDZ-653S Manual

Read more less

Alpine HDZ-Series 100-Watt RMS Hi-Resolution Aftermarket 6-1/2-Inch 3-Way Component Door Speaker System Using expertise gleaned from over five decades of crafting premium car audio products and trickle-down engineering and design from the Ultra Hi-Res AlpineF#1Status system technologies, the Alpine Status system features exceptional tooling and rich build quality for the best possible sound reproduction. Each component was hand-picked from the highest-quality materials for the highest in-class audio performance, that when used as a complete system, can achieve 192kHz/24bit playback. Drawing inspiration from the AlpineF#1Status system, the HDZ-653 features a unified carbon composite cone construction throughout the speaker components for a unified timbre identity. Alpine Proprietary Double Gathered Edge Surround technology gives the speakers ultra-low distortion and linear diaphragm movement that reproduces music true to the artist’s original intentions. Custom developed for Hi-Res Audio Playback, the HDZ-653 has an ultra-wide bandwidth of 55Hz-40kHz which is perfectly suited for accurate reproduction of even the highest quality of studio recordings. Each speaker component is designed to cover a wider range of playback spectrum giving the tuner a wider range of adjustability. The Alpine Status speaker line features two fitments for flexible installation options including a custom-fix model for custom applications and factory-fit models that were intentionally designed to fit into most factory speaker holes without custom work. The HDZ-653 is a custom-fit model that includes a 6.5- inch Mid-Bass driver, a 3.5-inch Midrange driver, and 1.25-inch High-Range driver. The Alpine Status System is sold separately and can be used to build a custom sound system. Three sets of true 4V preamp outputs are included to add additional amplifiers if more power is needed. For best results, install the complete Alpine Status system together as a full system to achieve the highest in-class audio performance only second to the Ultra High-Resolution AlpineF#1System. Features Hi-Res Audio Playback (192kHz/24Bit) w/full Alpine Status system Carbon Composite Diaphragm Material  Alpine Proprietary Double Gathered Edge Surround  6.5” Mid-Bass Driver (16.5cm) 3.5" Midrange Driver (8.5cm) 1.25” High Range Driver (3.2cm) Specifications 100W RMS 300W Peak Power Handling  Frequency response: 55Hz – 40kHz Sensitivity: 88dB Sold by the Pair Alpine HDZ-653 Manual

Read more less