Loaded Subwoofer Enclosure

ProWedge-Series 10-Inch 750-Watt Enclosed Subwoofer System, 3Ω Sealed Enclosure For those who seek the ultimate in compact-enclosure sub-bass fidelity, we offer this sealed ProWedge™ system, in which the superb performance capabilities of the W7AE subwoofer driver are harnessed within a compact, sealed enclosure. This system has it all: extension, impact, detail and smooth response... at any listening level. This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10W7AE-3 and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat. Finish: Black, high-grade automotive carpet, with gloss-black laminated decorative front baffle trim. Three solid aluminum bars provide stylish and rugged woofer protection. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 300 - 750WNominal Impedance: 3 Ω General Specifications Continuous Power Handling (RMS) 750 W System Nominal Impedance 3 Ω Enclosure Type Sealed, rear-firing design Finish Black carpet / laminate Grille Included Aluminum Bar Grille Physical Specifications External Width (W) 17.75 in / 451 mm External Height (H) 14.625 in / 371 mm External Depth (D1) 16.625 in / 422 mm External Top Surface Depth (D2) 11.50 in / 292 mm Net Weight 61.2 lb / 27.77 kg JL Audio CLS110RG-W7AE Brochure

Read more less

High Output Series 10-Inch 600-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure JL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. In the HO110-W6v3, the high power handling of the 10W6v3 subwoofer driver, combined with its small enclosure requirements, results in a very compact subwoofer system that is capable of impressive output with moderate amplification. JL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates just above the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W6v3 driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 10W6v3, and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. While no grille is provided, the recessed mounting baffle provides some protection for the woofer. A steel mesh woofer grille insert can be purchased separately (Model: SGR-10W6v2/v3), if additional woofer protection is desired. Finish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. "JL AUDIO" is embroidered in silver on the side surface of the enclosure. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 200 - 600WNominal Impedance: 2Ω General Specifications Continuous Power Handling (RMS) 600 W System Nominal Impedance 2 Ω Enclosure Type Chamber-coupled, slot-ported, rear-firing design Finish Dark gray carpet with black insert Grille Included No Physical Specifications External Width (W) 12.125 in / 308 mm External Height (H) 14 in / 356 mm External Depth (D1) 21.75 in / 552 mm Net Weight 47.8 lb / 21.7 kg JL Audio HO110-W6v3 Brochure

Read more less

TW1-Series 400-Watt Amplified 10-Inch Ported Subwoofer System With MicroSub+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes JL's exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency. Key to the enclosure’s performance is its efficient slot-ported design and precise tuning of its 10TW1 subwoofer driver. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems. Note: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Amplifier power: Built-in DCD™ Class D amplifier (400 W @ 0.25 Ω)Nominal Impedance: 0.25 Ω General Specifications Continuous Power Handling (RMS) Built-in amplifier 400 W @ 0.25 Ω System Nominal Impedance 0.25 Ω Input Voltage Range @ RCA Inputs 70 mV - 1.40 V RMS Input Voltage Range @ High-Level Inputs 280 mV - 5.4 V RMS Recommended Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 30 A (ATO or ATC) Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh JL Audio MicroSub+/PowerWedge+ Manual

Read more less

TW1-Series 400-Watt Amplified 10-Inch Subwoofer System In PowerWedge+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this subwoofer system employs JL's exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency. Harnessing the performance and insanely small box requirements of the TW1 subwoofer driver, this subwoofer system is designed to deliver amazing sub-bass from an enclosure that is only 5 inches (127 mm) deep. Its low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW1 driver and has been fine-tuned through extensive real-world listening. Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. Note: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Amplifier power: Built-in DCD™ Class D amplifier (400 W @ 0.25 Ω)Nominal Impedance: 0.25 Ω Enclosure and Subwoofer Built in USA with global components

 General Specifications Continuous Power Handling (RMS) Built-in amplifier 400 W @ 0.25 Ω System Nominal Impedance 0.25 Ω Input Voltage Range @ RCA Inputs 70 mV - 1.40 V RMS Input Voltage Range @ High-Level Inputs 280 mV - 5.4 V RMS Recommended Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 30 A (ATO or ATC) Enclosure Type Sealed Finish Black carpet Grille Included Black Steel Mesh JL Audio MicroSub+/PowerWedge+ Manual

Read more less

R-Series Loaded 600-Watt Thin 10-Inch 2-Ohm Subwoofer Enclosure Now you don’t have to choose between bass and space! Alpine’s R-Series Shallow preloaded subwoofer enclosure measures at a minimal 5.25” deep to deliver a loud and fun sound in most vehicle applications. Rubber “feet” are adjustable in height to accommodate uneven vehicle floors. Don’t let the size fool you – the enclosures feature the same motor movement (20MM of 1-way excursion) as the full-size R2-Series subwoofers for extreme output in a shallow woofer design. At the heart of the R-Series shallow subwoofers is an oversized 4-inch voice coil that houses the lightweight and powerful neodymium magnet for 600W RMS of power handling. Integrated cooling fins located in the core of the subwoofer help dissipate the heat generated by the rapid subwoofer movement for enhanced cooling reliability and hours of uninterrupted playtime. The unique CoolMount dual-panel mount subwoofer motor enhances cooling. Alpine’s Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, allows for better control over the motor, resulting in lower distortion and precise bass control. The preloaded enclosures use the subwoofer frame as bracing fora more ridged design and better bass response. A lightweight yet rigid aluminum dust cap allows the R-Series shallow subwoofer to transition sound quickly with minimal distortion and project the bass off the surface of the speaker for hard-hitting yet smooth bass performance. The included adjustable mounting brackets allow for a downfire mount configuration. With dual voice coils wired in parallel for a 2Ω load, the Alpine R-Series 10" shallow subwoofer enclosure is optimized to perform with Alpine's S-A60M or R-A75M mono amplifiers. Features Optimal sealed cabinet quality   Aluminum Dust Cap Neodymium Magnet    Alpine Gen2 DD Linear Magnetic Circuit   CARB compliant ¾” MDF construction   Premium Alpine embroidered black carpet  Alpine-branded terminal cup  Pre-installed steel mesh grille  Includes a 10” R-Shallow Subwoofer (RS-W10D4) Rubber, modular stackable foot design Specifications Dimensions: 21.15” W x 5.25” H x 16” L 600W RMS Power Handling  Frequency response: 29Hz – 200Hz  Dual 4Ω voice coils wired in parallel for a 2Ω load (compatible with S-A60M or R-A75M)  Nominal Impedance: 2Ω  Voice Coil: 4”(101.6mm)

Read more less

PowerWedge-Series 10-Inch 400-Watt Enclosed Subwoofer System, 2Ω Sealed Enclosure In this low-profile PowerWedge™ subwoofer system, JL harnesses the performance of the 10TW3 to deliver amazing sub-bass from an enclosure that is only 4.5 in. (114 mm) deep. This low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW3-D4 and has been fine-tuned through extensive real-world listening. The PowerWedge™ subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 100 - 400WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 400 W System Nominal Impedance 2 Ω Enclosure Type Sealed Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 20.75 in / 527 mm External Height (H) 14 in / 357 mm External Depth (D1) 4.5 in / 114 mm Net Weight 21.2 lb / 9.6 kg JL Audio CS110LG-TW3 Brochure

Read more less

PowerWedge-Series 10-Inch 400-Watt Enclosed Subwoofer System, 2Ω Sealed Enclosure In this sealed Truck PowerWedge™ subwoofer system, JL harnesses the performance of the 10TW3 to deliver amazing sub-bass from an enclosure that is only 6.25 in. (159 mm) deep at its base and 4.1 in. (104 mm) at the top. This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW3 and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 100 - 400WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 400 W System Nominal Impedance 2 Ω Enclosure Type Sealed, truck enclosure Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 19 in / 483 mm External Height (H) 12.375 in / 314 mm External Depth (D1) 6.25 in / 159 mm External Top Surface Depth (D2) 4.1 in / 104 mm Net Weight 21.2 lb / 9.6 kg JL Audio CS110TG-TW3 Brochure

Read more less

High Output Series 10-Inch 500-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure JL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. JL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates on one side of the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W3v3 driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 10W3v3, and has been fine-tuned through extensive real-world listening. This efficient system will produce superb output with as little as 150W of amplifier power, but performs best with 300 - 500W of power. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Three solid aluminum bars provide stylish and rugged woofer protection. The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat. Finish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. "JL AUDIO" is embroidered in silver on the top surface of the enclosure. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 150 - 500WNominal Impedance: 2Ω General Specifications Continuous Power Handling (RMS) 500 W System Nominal Impedance 2 Ω Enclosure Type Chamber-coupled, slot-ported, rear-firing design Finish Dark gray carpet with black insert Grille Included Aluminum Bar Grille Physical Specifications External Width (W) 29.5 in / 749 mm External Height (H) 13.5 in / 343 mm External Depth (D1) 12.0 in / 305 mm External Top Surface Depth (D2) 7.5 in / 190.5 mm Net Weight 34.7 lb / 15.74 kg JL Audio HO110RG-W3v3 Brochure

Read more less

MicroSub-Series 10-Inch 300-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 10TW1 subwoofer driver into an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 75 - 300WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 2 Ω Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 20.875 in / 530 mm External Height (H) 13.25 in / 337 mm External Depth (D1) 6.375 in / 162 mm Net Weight 25.70 lb / 11.66 kg JL Audio CP110LG-TW1-2 Brochure

Read more less

10-Inch 800-Watt Loaded Subwoofer Enclosure, 2-Ohm Final Impedance This CompR dual 10" subwoofer enclosure by Kicker makes surprisingly strong, smooth bass. Black carpeting with a front-facing tuned port raises the bar for acoustic efficiency, creating incredible bass levels.This CompR dual 10-Inch subwoofer enclosure works best with 800 watts of recommended power. Specifications TYPE: dual NO. OF WOOFERS/SIZE (in, cm): (2) 10, 25 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 800 Peak Power (watts, per ANSI/CTA-2031-A) 1600 SENSITIVITY (dB 1w/1m): 94 BOX TOP DEPTH (in, cm): 14 1/2, 36.8 BOX BOTTOM DEPTH (in, cm): 17 5/16,43.9 BOX HEIGHT (in, cm): 14, 35.6 BOX WIDTH (in, cm): 28 7/16, 72.3 Kicker CompR Subwoofer Enclosure Manual

Read more less

Ten-Inch Loaded Marine Subwoofer Enclosure, 400-Watt, 2Ω or 4Ω Final Impedance This weatherproof TB-Series subwoofer system by Kicker delivers serious bump from any corner of your trunk, behind your truck’s seat, or even in your boat or side-by-side. Surprisingly loud, the TB subs give you the bump you want without losing the space you need. Comes with a thick ABS tube construction, a flexible horizontal or vertical mounting system and spring-loaded speaker terminals. Sub-driver Grilles Included. The marine grade Kicker 46CWTB102 and 46CWTB104 10-Inch loaded subwoofer enclosures works best with 400-watts of amplified power. Specifications Type Reflex Size (in., cm) 10, 25 Impedance (ohms) 2 Power Watts (peak/RMS) 800/400 Sensitivity (dB 1w/1m) 85.7 Box Bottom Depth (in, cm) 16-9/16, 42.1 Box Height (in, cm) Vert. Mount: 17-1/16, 43.4; Horiz. Mount: 10-3/4, 27.3 Box Width (in, cm) 10-5/8, 27 What's in the Box: 1 - Enclosure assembly2 - Vertical mounting brackets1 - Horizontal mount base1 - Horizontal mount hook(retainer)1 - Horizontal mount plate(retaining clamp)7 - stainless steel M5 x 12mm button head screws for horizontal mount plate to base and mounting brackets to enclosure11 - nylon flat washers (to be used on all mounting fasteners)4 - stainless steel pan head phillips M4 x 25mm (for mount base to vehicle)1 - owner’s manual2 - Kicker stickers Kicker CWTB Subwoofer Enclosure Manual

Read more less

10-Inch 600-Watt Loaded Thin Subwoofer Enclosure, 2-Ohm Final Impedance This L7 series thin 10" loaded sub box by Kicker comes with one Solo-Baric L7S sub loaded into a custom engineered to spec subwoofer enclosure made of thick MDF construction with a custom port design. Heavy internal bracing with thick black carpeting complement the Kicker embroidered logo on this box. This 10-inch L7 thin subwoofer enclosure is best suited with 600W RMS of amplified power. Specifications Type thin-profile Woofer [in, cm] Solo-Baric L7S 10" 2Ω Impedance [Ohms] 2 Recommended Amplifier Power (watts RMS) 600 Peak Power (watts, per ANSI/CTA-2031-A) 1200 SENSITIVITY [dB 1w/1m] 89.5 Box Top Depth (in, cm): 6 1/2, 16.4 Box Bottom Depth (in, cm): 10, 25.4 Box Height (in, cm): 15, 38.1 Box Width (in, cm): 21 1/2, 54.6 Kicker L7 Solo-Baric Subwoofer Enclosure Manual

Read more less

10-Inch 500-Watt Loaded Square Subwoofer Enclosure, 2-Ohm Final Impedance With this L7R series 10" square sub box you get up to 20% more air movement compared to a round driver. This 500W loaded enclosure has an angled back, heavy duty internal bracing, thick MDF construction and black carpeting with a Kicker embroidered logo. This L7R subwoofer enclosure contains a single 10 Inch square driver with an RMS power rating of 500W @ 2Ω. Specifications Type single Woofer [in, cm] Solo-Baric L7R 10" Impedance [Ohms] 2 Recommended Amplifier Power [watts RMS] 500 SENSITIVITY [dB 1w/1m] 88.8 Box Top Depth (in, cm): 8 1/4, 21 Box Bottom Depth (in, cm): 13 7/8, 35.1 Box Height (in, cm): 13, 33 Box Width (in, cm): 24, 61 What's in the box? one loaded enclosure with one 10-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers

Read more less

10-Inch 600-Watt Dual Loaded Subwoofer Enclosure, 2-Ohm Final Impedance The CompC dual 10" sub box drivers from Kicker that are loaded into this spec-built enclosure have thick stamped steel baskets that hold injection-molded polypropylene cones with stabilizing ribs in the surround. This CompC 10" dual loaded sub box is rated for 600W RMS of amplified power.  Specifications Dual Subwoofers (in, cm) (2) 10, 25 Impedance (Ohms) 2 Recommended Amplifier Power (watts RMS) 600 Peak Power (watts, per ANSI/CTA-2031-A) 1200 Sensitivity (dB 1w/1m) 98.4 Box Top Depth (in, cm) 13 7/16, 34.1 Box Bottom Depth (in, cm) 16 3/8, 41.6 Box Height (in, cm) 14, 35.6 Box Width (in, cm) 28, 71.1 Recommended Amplifiers! Kicker CX600.1 Kicker CompC Subwoofer Enclosure Manual

Read more less

Dual 10-Inch Thin Subwoofer Enclosure, 400-Watt RMS, 2-Ohm The Kicker CompRT series down-firing 10-inch subwoofer enclosure comes loaded with a passive reFLEX™ subwoofer and Kicker CompRT sub, then carpeted and loaded with a single 2Ω terminal.  Covered in stylish black carpeting and built with thick MDF, these tough enclosures take serious power without taking up needed space. The TRTP 10-inch subwoofer enclosure works best with 400-watts of recommended power. Specifications TYPE: thin-profile WOOFER SIZE (in, cm): 10, 25 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 400 Peak Power (watts, per ANSI/CTA-2031-A) 800 SENSITIVITY (dB 1w/1m): 96.5 BOX TOP DEPTH (in, cm): 13-1/4, 33.5 BOX BOTTOM DEPTH (in, cm): 13-1/4, 33.5 BOX HEIGHT (in, cm): 5-5/8, 14.2 BOX WIDTH (in, cm): 25-5/8, 65 Kicker TRTP Subwoofer Enclosure Manual

Read more less

10-Inch 400-Watt Loaded Thin Dual Subwoofer Enclosure, 2-Ohm Final Impedance The CompRT 10" thin subwoofer by Kicker is a weather resistant thin sub with a 2Ω configuration with this box. The thin 10 inch sub magnet structure delivers 400W RMS of power with a chassis mounting depth of just under 3 1/2". The Kicker designed UniPlate™ back plate and solid pole piece serve as a single heat-absorbing unit to keep this 10" CompRT thin subwoofer driver nice and cool.The Kicker 43TCWRT102 10" subwoofer enclosure works best with 400 watts of RMS power. Specifications TYPE: thin-profile NO. OF WOOFERS/SIZE (in, cm): 10, 25 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 400 Peak Power (watts, per ANSI/CTA-2031-A) 800 SENSITIVITY (dB 1w/1m): 96.5 BOX TOP DEPTH (in, cm): 3-7/16, 8.8 BOX BOTTOM DEPTH (in, cm): 6-9/16, 16.7 BOX HEIGHT (in, cm): 11-13/16, 39 BOX WIDTH (in, cm): 23-1/4, 59.1 Kicker CompRT Subwoofer Enclosure Manual

Read more less

10-Inch Thin Loaded Subwoofer Enclosure, 500-Watts RMS, 2-Ohm or 4-Ohm Impedance Barely seven inches deep, the Kicker TL7T 10-Inch thin subwoofer enclosure is perfect for big bass under or behind your seats. Genuine Kicker L7T subwoofer included Angled design for excellent fit Heavy internal bracing Single 2-Ohm terminal Easy to install and wire Thick black carpeting Rounded corners Embroidered Kicker logo Thick MDF construction Specifications Type single truck Woofer [in, cm] Solo-Baric L7T 10" 2Ω or 4 Ω Impedance [Ohms] 2 or 4 Recommended Amplifier Power [watts RMS] 500 SENSITIVITY [dB 1w/1m] 85.98 Box Top Depth (in, cm): 4-3/8, 11.3 Box Bottom Depth (in, cm): 7-1/4, 18.5 Box Height (in, cm): 12, 30.4 Box Width (in, cm): 20-1/4, 51.5 What's in the box? one loaded enclosure with one 10-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers Kicker L7T Subwoofer Enclosure Manual

Read more less

10-Inch 500-Watt Loaded Thin Square Subwoofer Enclosure, 2-Ohm Final Impedance With this TL7R series thin 10" square sub box you get up to 20% more air movement compared to a round driver. This 500W loaded enclosure has an angled back, heavy duty internal bracing, thick MDF construction and black carpeting with a Kicker embroidered logo. This TL7R subwoofer enclosure contains a single 10 Inch square driver with an RMS power rating of 500W @ 2Ω. Specifications Type single truck Woofer [in, cm] Solo-Baric L7R 10" Impedance [Ohms] 2 Recommended Amplifier Power [watts RMS] 500 SENSITIVITY [dB 1w/1m] 88 Box Top Depth (in, cm): 6 1/2, 16.4 Box Bottom Depth (in, cm): 10, 25.4 Box Height (in, cm): 15, 38.1 Box Width (in, cm): 21 1/2, 54.6 What's in the box? one loaded enclosure with one 10-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers

Read more less

Alpine 350-Watt 10-Inch Truck Subwoofer Enclosure, 2Ω Final Impedance With a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces. Radial Vented VC Heat Sink & Airflow Management System actively manages voice coil temperatures by forcing air directly across the heat sink system. FEA Optimized Dual-Sided Machined CRC Motor Structure creates a symmetrical magnetic field with evenly distributed flux density to greatly reduce distortion, while further improving power handling and output. The High-Amplitude Multi Roll Surround Design allows for extreme excursions without sacrificing valuable cone area. FEA Optimized for linearity and made with injection-molded Santoprene ®, the HAMR surround is a key part of the suspension system that provides accurate, distortion-free control at extreme excursions. Specifications 2Ω Impedance Ported Enclosure Design Frequency Response: 28Hz-200Hz Dimensions 21-5/8" Wide x 15-1/4" Tall x 7-1/4" Deep 1x 3-15/16" Alpine SBT-S10V Manual

Read more less

BassWedge-Series Dual 10-Inch 600-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofers to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofers firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 150 - 600WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 600 W System Nominal Impedance 2 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No Physical Specifications External Width (W) 29.61 in / 752 mm External Height (H) 13.77 in / 350 mm External Depth (D1) 17.38 in / 441 mm External Top Surface Depth (D2) 14 in / 356 mm Net Weight 50.7 lb / 23 kg JL Audio CP210-W0v3 Brochure

Read more less

BassWedge-Series 10-Inch 300-Watt Enclosed Subwoofer System, 4Ω Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 75 - 300WNominal Impedance: 4 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No Physical Specifications External Width (W) 15.51 in / 394 mm External Height (H) 13.77 in / 350 mm External Depth (D1) 17.38 in / 441 mm External Top Surface Depth (D2) 14 in / 356 mm Net Weight 29 lb / 13.15 kg JL Audio CP110-W0v3 Brochure

Read more less

10-Inch 300-Watt Thin Subwoofer Enclosure, 2-Ohm or 4-Ohm Final Impedance This CompC 10" thin loaded loaded sub box is custom-sized to optimize subwoofer performance. This enclosure can fit under or behind a rear seat, has heavy MDF construction, is covered in black carpet with yellow embroidery, and comes with spring loaded speaker terminals for an easy connection of your subwoofer wire.  These thin 44TCWC102 and 44TCWC104 10-inch enclosure works best with 300 watts of RMS amplified power. Specifications Subwoofer (in, cm) 10, 25 Impedance (Ohms) 2, 4 Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 Sensitivity (dB 1w/1m) 93.8 Box Top Depth (in, cm) 4,10.2 Box Bottom Depth (in, cm) 7 5/8, 19.4 Box Height (in, cm) 15, 38.1 Box Width (in, cm) 21 1/2, 54.6 Kicker CompC Subwoofer Enclosure Manual

Read more less