3M™ Blue T-Tap 16/14 Gauge - Package of 100
3M™ Scotchlok™ Insulation Displacement Connectors are quick slide t-tap disconnects used to electrically tap into a wire in mid span without cutting or stripping the wire. They feature nylon insulation, making them ideal for use in light fixtures, appliances and other electrical OEMapplications.
for 16-14 AWG wire
Rated for 600V building wire and 1000V rated for signs, fixtures and luminaires
The connector withstands temperatures of 221 degrees F (105 degrees C)
UL Listed, CSA Certified and RoHS 2011/65/EU Compliant
Package of 100
Black Insulation Displacement Connector 26/22 Ga - 100Pk
Metra T-Tap quick splice connectors are used to tap into a wire, mid run without cutting or stripping the wire. They have a brass conductor inside a nylon, color coded, insulative clam shell for quick identification and installation.
Black connector is for use on 26-22 AWG wire
Package of 100
Ten-Inch Black-Mesh Grille for Select JL-Audio Subwoofer-Drivers
Provide attractive, sturdy protection to your Subwoofer with this fine steel mesh grille insert, powder-coated in a satin black finish. The insert is designed to fit snugly onto the woofer's grille receiver ring.
Fits: 10WX, 10WXv2, 10W0v2, 10W0v3, 10W1v2, 10W1v3, 10W3v3
Twelve-Inch Black-Mesh Grille for Select JL-Audio Subwoofer-Drivers
Provide attractive, sturdy protection to your Subwoofer with this fine steel mesh grille insert, powder-coated in a satin black finish. The insert is designed to fit snugly onto the woofer's grille receiver ring.
Fits: 12WX, 12WXv2, 12W0v2, 12W0v3, 12W1v2, 12W1v3, 12W3v3
Heise Add-On Universal 3-Inch Pair of Automotive Off-Road Fog-Lights with Switch and Wiring Harness, Blackout Series
Heise’s Blackout Series high output cube LED lights are small but powerful for better coverage at night. These next-generation lights have refined frames and cleaner lines for a sleek yet minimalistic look. The upgraded optics have changed from a direct to an indirect placement allowing more control of the location and pattern of the beam. This allows the lights to be tailored to the vehicle, its entire lighting system, and for the driver’s lighting coverage needs. Each set is rated IP67 and includes a dual light wiring harness (HE-DLWH1) for installation. Flush mount options are also available and sold individually (without harness).
Specifications
2 Light Pack
Input Voltage: 12-24V Dc
Color Temperature: 5700K
Beam Pattern: 100o Flood
Housing Material: Die-Cast Aluminum
Color: Black
Lens Material: Polycarbonate
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
Operating Temperature: -40oF To +140oF
Protection: Reverse Polarity
Mounting: Side & Rear
Limited Lifetime Warranty
Size: 3”
4 LEDs
Wattage: 40W
Raw Lumens: 4,800lm
Lux at 10m: 28
Current Consumption @ 13.8V: 2.9A
IP Rating: IP67
WARNING: THIS LIGHTING PRODUCT IS SOLD FOR OFF-ROAD USE ONLY. This product should not be used on the road. Owners should keep the original factory bulbs so that they can replace them for use on public roads. Keep the box that the new bulbs came in to store the bulbs and be sure to handle them with care when removing and re-installing.
Single-Pole Waterproof Circuit-Breakers for select 50-Amp to 200-Amp Automotive Applications
High amp circuit breakers are typically used in auxiliary and accessory circuits for trucks, buses, RVs and marine applications. All high amp circuit breakers comply with the SAE J1171 standard for ignition protection and have applications in battery charging systems that use battery isolators to manage and protect batteries in multi-battery installations.
Red LED on top of the device gives a visual indication of when the breaker has been tripped open.
Type III — manual reset
Red LED lights when tripped.
Flush mount with push-to-trip button, 42 Vdc
Waterproof, sealed housing
1/4-28 threaded studs
SEMS nuts installed
50-200 Amp
Each
Blue Nylon Female Quick Disconnect 16-14 Gauge .250
Nylon Quick Disconnect terminals are designed to be connected and separated quickly and easily. They can be pulled apart if needed. They are a safe and convenient way to create secure electrical connections. Used by the automotive and marine industries, due to their ease of use, and resistance to abrasion and impacts. Nylon Quick Disconnect terminals can be installed quickly and last for years.
Accepts wire size 16 AWG – 14 AWG
Connects to male terminal – size .250
Fully insulated
Nylon insulation, color Blue
Package of 100 pcs
3M™ Yellow T-Tap 12/10 Gauge - Package of 100
3M™ Scotchlok™ Insulation Displacement Connectors are quick slide t-tap disconnects used to electrically tap into a wire in mid span without cutting or stripping the wire. They feature nylon insulation, making them ideal for use in light fixtures, appliances and other electrical OEMapplications.
for 12-10 AWG wire
Rated for 600V building wire and 1000V rated for signs, fixtures and luminaires
The connector withstands temperatures of 221 degrees F (105 degrees C)
UL Listed, CSA Certified and RoHS 2011/65/EU Compliant
Package of 100
Blue Nylon Male Quick Disconnect 16-14 Gauge .250
Nylon Quick Disconnect terminals are designed to be connected and separated quickly and easily. They can be pulled apart if needed. They are a safe and convenient way to create secure electrical connections. Used by the automotive and marine industries, due to their ease of use, and resistance to abrasion and impacts. Nylon Quick Disconnect terminals can be installed quickly and last for years.
Accepts wire size 16 AWG – 14 AWG
Connects to female terminal – size .250
Fully insulated
Nylon insulation, color Blue
Package of 100 pcs
XDM-Series Five-Channel Class-D Marine-Grade Amplifier, 75-Watts x Four-Channels @ 4-Ohm and 300-Watt Mono @ 2-Ohm
The XDM700/5 is ideal for a complete audiophile-grade, subwoofer + four satellite system, and fits comfortably in just about any vehicle or vessel. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75W x 4 @ 4Ω), while also generating a solid 300W of power for a subwoofer system. The technology that makes this much power possible in such a small chassis is JL-Audio's high-speed NexD switching amplifier design.
Suitable for car or boat installations, the XDM700/5 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
The XDM700/5 includes a 12dB / octave high-pass filter for one main channel pair, a 12dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500Hz or 500-5000Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver's seat or helm.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Main Channels @ 4 Ω
75 W RMS x 4 @ 14.4V
Main Channels @ 2 Ω
100 W RMS x 4 @ 14.4V
Main Channels - Bridged @ 4Ω
200 W RMS x 2 @ 14.4V
Subwoofer Channel @ 4 Ω
180 W RMS x 1 @ 14.4V
Subwoofer Channel @ 3 Ω
240 W RMS x 1 @ 14.4V
Subwoofer Channel @ 2 Ω
300 W RMS x 1 @ 14.4V
Subwoofer Channel @ 1.5 Ω
N/A
Main Channels @ 4 Ω
60 W RMS x 4 @ 12.5V
Main Channels @ 2 Ω
90 W RMS x 4 @ 12.5V
Main Channels - Bridged @ 4Ω
180 W RMS x 2 @ 12.5V
Subwoofer Channel @ 4 Ω
180 W RMS x 1 @ 12.5V
Subwoofer Channel @ 3 Ω
240 W RMS x 1 @ 12.5V
Subwoofer Channel @ 2 Ω
300 W RMS x 1 @ 12.5V
Subwoofer Channel @ 1.5 Ω
N/A
Frequency Response (Main Channels)
12 Hz - 22 kHz (+0, -1dB)
Frequency Response (Subwoofer Channel)
10 Hz - 1 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power (Main Channels)
>104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W
>84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ω
>150 / 50 Hz
Damping Factor @ 2 Ω
>75 / 50 Hz
THD+N @ Rated Power (Main Channels)
<1% @ 2 Ω per Ch.
THD+N @ Rated Power (Subwoofer Channels)
<1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs
200 mV - 4 V RMS
Min.Copper Power / Ground Wire Gauge
4 AWG wire
Fuse Rating
60 A (AFS, AGU or MaxiFuse™)
Filter Mode(s): Channels 1 & 2 (front)
High-Pass only
Filter Slope(s): Channels 1 & 2 (front)
12 dB/octave
Filter Frequency Range: Channels 1 & 2 (front)
50 Hz - 5 kHz
Filter Mode(s): Channels 3 & 4 (rear)
High-Pass or Bandpass
Filter Slope(s): Channels 3 & 4 (rear)
12 dB/octave
Filter Frequency Range: Channels 3 & 4
50 Hz - 500 Hz
Filter Mode(s): Subwoofer Channel
Low-Pass only
Filter Slope(s): Subwoofer Channel
12/24 dB/octave
Filter Frequency Range: Subwoofer Channel
50 Hz - 500 Hz
Detented, Calibrated Filter Freq. Potentiometers
Yes
Filter Defeat Function
Yes
Infrasonic Filter: Subwoofer Channel
none
Remote Level Control
Optional HD-RLC or MHD-RLC (water-resistant)
Remote Level Modes
Sub Ch. or All Channels
Channel Input Mode Switch
Yes (2/4/6 ch.)
Pass-Through Preamp Output
None
Source Channel Selection for PreOuts
N/A
Height (H)
2.05 in / 52 mm
Width (W)
10.23 in / 260 mm
Depth (D)
7.09 in / 180 mm
Net Weight
6.15 lb / 2.79 kg
JL Audio XDM700/5 Manual
Forty-Eight-Inch-Long Motorola-Style AM/FM Antenna Extension-Cable
Easily extend your FM Antenna wire to reach a new mounting location or add-on to your existing connection to provide more length to install your new head-unit.
Universal 18-Inch Motorola Style FM-Antenna Extension-Cable
Easily extend your FM Antenna wire to reach a new mounting location or add-on to your existing connection to provide more length to install your new head-unit.
HDMI and USB-Port With Splash-Resistant Cover and Optional Mounting-Bracket
Single piece design mounts both an HDMI and USB extension cable to your vehicle for use with your aftermarket head unit. Extension cables are each 3 feet long. The Splash-resistant cover is perfect for boats, or recreational vehicles. The optional dash-bracket provides an additional mounting surface if needed.
96-Inch Universal Motorola-Style Head-Unit Replacement Antenna Extension-Cable
Easily extend your FM Antenna wire to reach a new mounting location or add-on to your existing connection to provide more length to install your new head-unit.
Aftermarket Add-on Two-Lamp Wiring-Harness and Switch-Kit
Universal Plug and Play Wiring Harness with On-Off Rocker Switch
12V DC Relay
30A Fuse
With 2-pin DT connectors for 2 Lamps
With Waterproof Fuse Holder
Set includes Wiring Harness and Switch
Use with two Heise Light Bars or Cubes 22 inches or smaller
Heise HE-DLWH1 Manual
Yellow Vinyl Ring Terminal 4 Gauge 3/8 inch - Package of 25
Vinyl butt splices can connect two or more wires in an abrasion and impact resistant connection. They are a safe and convenient way to create secure electrical connections. Used by the automotive, marine and audio industries, due to their ease of use, they are simple to crimp.
Vinyl Ring Terminals
4 Gauge
3/8 Inch
Yellow
Package of 25 - Sold by the connector
Yellow Vinyl Ring Terminal 12-10 Gauge 3/8 in Package of 100
Vinyl butt splices can connect two or more wires in an abrasion and impact resistant connection. They are a safe and convenient way to create secure electrical connections. Used by the automotive, marine and audio industries, due to their ease of use, they are simple to crimp.
Accepts wire size 12 AWG – 10 AWG
Abrasion and impact resistant
Vinyl insulation, color Yellow
Package of 100 pcs
Yellow Vinyl Butt Connector 12-10 Gauge - Package of 100
Vinyl butt splices can connect two or more wires in an abrasion and impact resistant connection. They are a safe and convenient way to create secure electrical connections. Used by the automotive, marine and audio industries, due to their ease of use, they are simple to crimp.
Accepts wire size 12 AWG – 10 AWG
Abrasion and impact resistant
Vinyl insulation, color Yellow
Package of 100 pcs
Yellow Nylon Male Quick Disconnect 12-10 Gauge .250
Nylon Quick Disconnect terminals are designed to be connected and separated quickly and easily. They can be pulled apart if needed. They are a safe and convenient way to create secure electrical connections. Used by the automotive and marine industries, due to their ease of use, and resistance to abrasion and impacts. Nylon Quick Disconnect terminals can be installed quickly and last for years.
Accepts wire size 12 AWG – 10 AWG
Connects to female terminal – size .250
Fully insulated
Nylon insulation, color Yellow
Package of 100 pcs
Yellow Nylon Female Quick Disconnect 12-10 Gauge .250
Nylon Quick Disconnect terminals are designed to be connected and separated quickly and easily. They can be pulled apart if needed. They are a safe and convenient way to create secure electrical connections. Used by the automotive and marine industries, due to their ease of use, and resistance to abrasion and impacts. Nylon Quick Disconnect terminals can be installed quickly and last for years.
Accepts wire size 12 AWG – 10 AWG
Connects to male terminal – size .250
Fully insulated
Nylon insulation, color Yellow
Package of 100 pcs
Blue Vinyl Female Quick Disconnect 16-14 Gauge .250
Vinyl Quick Disconnect terminals are designed to be connected and separated quickly and easily. They can be pulled apart if needed. They are a convenient and safe way to create secure electrical connections. Used by the automotive and marine industries, due to their ease of use, and resistance to abrasion and impacts. Vinyl Quick Disconnect terminals can be installed quickly and last for years.
Accepts wire size 16 AWG – 14 AWG
Connects to male terminal – size .250
Vinyl Insulation – color Blue
Package of 100 pcs
Blue Vinyl Female Quick Disconnect 16-14 Gauge .205
Vinyl Quick Disconnect terminals are designed to be connected and separated quickly and easily. They can be pulled apart if needed. They are a convenient and safe way to create secure electrical connections. Used by the automotive and marine industries, due to their ease of use, and resistance to abrasion and impacts. Vinyl Quick Disconnect terminals can be installed quickly and last for years.
Accepts wire size 16 AWG – 14 AWG
Connects to male terminal – size .205
Vinyl Insulation – color Blue
Package of 100 pcs
