Aftermarket Backup or Forward Facing Surface-Mountable Recessed Add-on Camera with Night Vision
The CM-CKH5 is Rydeen's Keyhole style camera. Recessed bullet style cameras are small cylinder shaped cameras that are great for flush mounting in a vehicles bumper. Bullet cameras have many mounting options and are great for covert or concealed uses. The camera itself comes in a black, waterproof casing with an IP67 rating, 170° viewable angle, and a full color standard resolution display to assist with blind spot visibility.
The CM-CKH5 is equipped with Rydeen's Super CMOS IV Sensor with NightVision Technology, and 480 TV Lines. The CVBS video resolution gives a high quality image for detailed viewing. This high-tech backup camera is a perfect choice where low visual impact on the vehicle is desired, due to it’s barely being visible when flush with the bumper.
Resolution (TV LINES): 480
Minimum illumination: < 0.3 Lux
Viewing Angle: 170o
Operating Voltage: 9 – 16V
Water-proof: IP67
Video System: NTSC (color)
Image: Mirror / Standard Selectable
Selectable Parking Line Display
Body Color: Black (B)
Rydeen CM-CKH5 Manual
Add-On Amplifier OEM Integration Line Converter with DSP and Factory-Amplifier Bypass-Harness for Select 2015-UP Amplified Ford Vehicles with Bang and Olufsen Sound Systems
Upgrade your sound system with this cost-effective, easy-to-install DSPpackage that includes a vehicle-specific T-harness.
Complete Tuning ControlInstallers will have full control to fine-tune each of the 10 channel outputs individually, controlled wirelessly via a free app available for smartphones and tablets. The app makes tuning easy with a 31-band graphic EQ and up to 10ms time delay for each channel, with independent high pass, low pass, and bandpass filters.
Retain Features with a Built-in InterfaceUtilizing Axxess’s data interface technology, the AXDSP-X goes beyond what a traditional DSP can do and retains many of the features commonly lost when upgrading a sound system. Voice prompts, parking sensor chimes, and other factory chimes are retained with an adjustable volume control that many traditional DSPs cannot offer. This is a cost-effective solution for customers who want to retain their factory radio and improve their vehicle sound quality, while still retaining systems like SYNC or OnStar®.
One Solution, Many ApplicationsThe AXDSP-X solution already works with a wide range of vehicle applications and systems, including OE or aftermarket radios, and fixed-level analog and/or digitally controlled amplified systems, in addition to non-amplified vehicles that do not have chimes. The AXDSP-X works with all the existing DSP T-harnesses and still offers the same easy installation behind the radio.
Package includes the A2B interface, vehicle-specific T-harness, and amplifier bypass harness
Designed for select vehicles with a B&O A2B amplifier
Uses AXDSP-X technology
31-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
6 inputs and 10 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains OE voice prompts (SYNC) with adjustable level
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Chimes and voice prompts go through the aftermarket amplifier
Factory amplifier does NOT need to be retained
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Micro “B” USB updatable
1-year limited warranty
Applications
FORD
Bronco
B&O system
2020-2023
Bronco Sport
B&O system
2020-2023
EcoSport
B&O system
2016-2019
EcoSport
B&O system
2020-2023
Edge
B&O system
2019-2023
Edge
B&O system
2019-2023
Edge
B&O system
2019-2023
Escape
B&O system
2020-2023
Explorer
B&O system
2020-2023
F-150
B&O system
2017-2020
F-150
B&O system
2018-2020
F-150
B&O system
2021-2022
F-250
B&O system
2020-2020
F-250
B&O system
2020-2020
Ranger
B&O system
2019-2023
Axxess AXDSPX-A2B2 Manual
3.5mm-TRS Connector to a Female Y-RCA Adapter
RCA adapter length is 8Inch (Appr:20CM), 3.5mm mini-jack to 2-RCA stereo audio Y adapter cable
RCA Female Stereo Plug is perfect to plug a portable CD player, MP3 player, iPod, smartphone, tablet, PC sound card, and other devices with an aux connector into the existing RCA connections
RCA (M) to 2 RCA (F) stereo audio Y adapter subwoofer cable will send your music from an MP3 player to a stereo system.
Plugs audio cable is designed to split a stereo signal, high-quality polished connectors, and corrosion-resistant 3.5mm connectors; prevent radio frequency interference (RFI) and electromagnetic interference (EMI).
2-RCA stereo audio Y adapter cable one end has two color-coded female 3.5mm stereo mini jacks (left and right audio channels).and the other end has one male RCA plugs
Amplifier Add-On OEM Line-Converter T-Harness for Select 2011-UP Ford Vehicles
For use with the Axxess AXDSP-L line converter.
Applications
FORD
CMAX
non-amplified
2013-2017
EcoSport
2016-2019
Edge
Sony or Non-amplified
2011-2018
Edge
2019-2023
Escape
2015-2019
Expedition
Sony or Non-amplified
2015-2017
Expedition
2018-2022
Explorer
Sony or Non-amplified
2011-2019
F-150
Sony or Non-amplified
2014-2016
F-150
2017-2020
Fiesta
2011-2019
Flex
2013-2019
Focus
2012-2019
Fusion
2013-2020
Mustang
2015-2023
Ranger
2019-2023
Super Duty
Sony or Non-amplified
2019-2020
Taurus
2013-2019
Axxess AXDSPH-FD2 ManualAxxess AXDSPL-FD2 Manual
Add-On Amplifier OEM Integration Interface for Select 2011-UP Ford Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-FD2 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
FORD
Edge
non-amplified
2011-2020
Escape
non-amplified
2013-2019
Explorer
non-amplified
2011-2019
F-150
non-amplified
2013-2020
F250/F350/F450/F550
non-amplified
2013-2019
Fiesta
non-amplified
2011-Up*
FLEX
non-amplified
2013-2019
Focus
non-amplified
2012-2018
Fusion
non-amplified
2013-2020
Mustang
non-amplified
2015-2020
Ranger
non-amplified
2019-2020
TAURUS
non-amplified
2013-2019
Transit 150/250/350
non-amplified
2015-2019
Transit Connect
non-amplified
2014-2018
Axxess AXLOC-FD2 Manual
Amplifier Mounting Bracket for Under-The-Seat Locations in Select 2018-UP Jeep Wrangler-JL and Gladiator-JL Vehicles
The SBA-J-JLU-UAR Universal Amplifier Rack fits under either front seat to securely mount one of several different JL Audio amplifier models (sold separately). Featuring an angled design to maximize rear seat foot space, the SBA-J-JLU-UAR Amplifier Rack requires no drilled holes and installs using factory hardware. Engineered and Built in USA.
Includes predrilled mounting locations and hardware to install one of the following amplifier models:
VXi: All models.XDv2: All models, except XD800/8v2, XD1000/1v2 and XD1000/5v2.*M-Series: All models, except M800/8v2, M1000/1v2 and M1000/5v2.RD: All models, except RD1000/1, RD1500/1 and RD900/5.MX: All models; up to two of MX280/4 and MX300/1.*** includes XD versions** includes HX and MHX versions
JL Audio SBA-J-JLU-UAR Manual
DC Power Cables for Commercial Grade iBeam Video Cameras
Provides power to the adapter cable included with iBeam commercial cameras
To be used when connecting to a RCA input monitor
12-inch in length
18-gauge wire
Sold individually
Amplified or Non-Amplified Head-Unit Replacement Wiring-Harness Interface for Select 2006-2016 BMW and MINI Vehicles
Provides accessory power (12-volt 10-amp)
Retains R.A.P. (retained accessory power)
Provides NAV outputs (parking brake, reverse, and V.S.S)
Retains warning chimes
For non-amplified models, or when bypassing a factory amplifier
Retains balance and fade
Micro-B USB updatable
Non-Amplified Applications
BMW
1 Series
2008-2013
3 Series
2006-2013
M3
2007-2013
MINI
Clubman (R55)
2008-2014
Convertible (R57)
2009-2015
Countryman (R60)
2011-2016
Coupe (R58)
2012-2015
Hatchback (R56)
2007-2013
Roadster (R59)
2012-2015
Amplified Applications
MINI
Countryman (R60)
2011-2016
Axxess Interface AXRC-BW1 Manual
Aftermarket Head-Unit Replacement Maestro-Module T-Harness for Select 2008-2015 Subaru Vehicles
Radio replacement T-harness for for select Subaru vehicles 2008-2015. Greatly simplifies the installation of the Maestro RR module sold separately.
Click Here to View Vehicle Coverage Information
Head-Unit Replacement USB Adapter-Cable for Select 2015-2018 Subaru Vehicles
Connects the factory USB port to an aftermarket radio in select Subaru vehicles.
Click here to view vehicle coverage
Input Voltage of 10V to 24V*, Selectable Output to 3.3V, 5V, 6V or 9V
No programming is required. Use the 4-position switch to select the desired voltage output and install the VOLT-39.
Not intended for installation in 24V systems
Amplified Head-Unit Replacement Wiring-Harness Adapter for Select 2000-2007 Toyota and Lexus Vehicles
Wiring harness for fast and easy radio installation
Plugs into the car’s original radio connectors on one side
Retains factory analog amplifier and speakers
Color-coded wires on the other side are connected to the aftermarket radio
No wire cutting needed for factory radio connectors
Provides electrical power to the radio for a four-speaker connection
Amplified Applications
TOYOTA
4Runner
2000-2002
Avalon
2000-2004
Camry
2002-2006
Camry Solara
2000-2003
Celica
2000-2005
Highlander
2001-2007
Land Cruiser
2000-2007
Sequoia
2001-2004
Sienna
2000-2003
Solara
1999-2003
Tacoma
2000-2004
Tundra
2000-2005
LEXUS
ES 330
2002-2006
ES 300
2000-2001
Head-Unit Replacement Wiring-Harness Adapter for Select 1991-2001 Toyota and Lexus Vehicles
Factory amplifier integration wiring harness for fast and easy radio installation
Plugs into the car’s original radio connectors on one side
Color-coded wires on the other side are connected to the aftermarket radio
No wire cutting needed for factory radio connectors
Provides electrical power to the radio for a four-speaker connection
Applications
TOYOTA
4Runner
1992-1999
Avalon
1995-1999
Camry
1992-2001
Camry Solara
1999
Celica
1994-1999
Land Cruiser
1993-1999
MR2
1991-1995
Previa
1991-1997
Sienna
1996-1999
Supra
1994-1998
Tacoma
1995-1999
LEXUS
ES 300
1992-1999
LS 400
1993-1994
LX 450
1996-1997
SC 300
1992-2000
SC400
1992-2000
Non-Amplified Head-Unit Replacement Wiring-Harness Adapter for Select 1985-2002 Ford, Lincoln, Mazda and Mercury Vehicles
Install a new car radio faster with this wiring harness that plugs right into the vehicle's connectors, allowing you to hook up the radio into the vehicle's electrical system. On one side, the wiring harness is color-coded with wires that you'll connect or solder into the aftermarket radio/receiver. The other side has a vehicle-specific adapter that connects directly into the original radio connectors for a quicker installation without having to cut each of the wires.
Keep in mind that you may need additional parts to complete your installation, including a dash kit, antenna adapter, and, depending on your vehicle, a special interface adapter to retain audio controls on your steering wheel or other important vehicle functions like navigation, video, and more. Look up your vehicle for more information.
Wiring harness for fast and easy radio installation
Plugs into the car's original radio connectors on one side
Color-coded wires on the other side are connected to the aftermarket radio
No wire cutting needed for factory radio connectors
Provides electrical power to the radio for a four-speaker connection
Non-Amplified Applications
FORD
Aerostar
1985-1997
Aspire
1995-1997
Bronco
1986-1996
Bronco II
1989-1990
Contour
1995-2000
Crown Victoria
1992-1994
Econoline
1986-1997
Escort
1991-1996
Escort, Escort EXP
1986-1990
Explorer
1991-1994
F-150
1997-1998
F-250
1998
F-250/350
1997
F-Series Pickup
1986-1996
LTD/LTD Crown Victoria
1986-1991
Mustang
1986-1998
Probe
1988-1997
Ranger
1986-1997
Taurus
1986-1995
Tempo
1986-1994
Thunderbird
1986-1997
Windstar
1995-1998
JAGUAR
S-type
2000-2002.5
LINCOLN
Continental
1986-1994
Mark VII
1986-1992
Town Car
1986-1994
MAZDA
B-Series Pickup
1994-1997
Navajo
1991-1994
MERCURY
Capri
1986-1994
Cougar
1986-1997
Grand Marquis
1986-1994
Lynx
1986-1987
Mystique
1995-2000
Sable
1986-1995
Topaz
1986-1994
Tracer
1991-1996
Villager
1993-1998
NISSAN
Quest
1993-1998
Amplified or Non-Amplified Head-Unit Replacement Wiring-Harness Adapter for Select 1998-2013 Honda, Acura and Suzuki Vehicles
Install a new car radio faster with this wiring harness that plugs right into the vehicle's connectors, allowing you to hook up the radio into the vehicle's electrical system. On one side, the wiring harness is color-coded with wires that you'll connect or solder into the aftermarket radio/receiver. The other side has a vehicle-specific adapter that connects directly into the original radio connectors for a quicker installation without having to cut each of the wires.
Keep in mind that you may need additional parts to complete your installation, including a dash kit, antenna adapter, and, depending on your vehicle, a special interface adapter to retain audio controls on your steering wheel or other important vehicle functions like navigation, video, and more. Look up your vehicle for more information.
Wiring harness for fast and easy radio installation
Plugs into the car's original radio connectors on one side
Color-coded wires on the other side are connected to the aftermarket radio
No wire cutting needed for factory radio connectors
Provides electrical power to the radio for a four-speaker connection
Non-Amplified Applications
ACURA
CL
2001-2003
MDX
2001-2006
NSX
2005
RSX
2002-2006
TL
1999-2008
HONDA
Accord
1998-2002
Civic
1999-2011
CR-V
1999-2006
Element
2003-2011
Insight
2001-2006
Odyssey
1999-2007
Pilot
2003-2008
Prelude
1999-2001
Ridgeline
2005-2008
S2000
2000-2009
ISUZU
Oasis
1999
SUZUKI
Aerio
2005-2007
Aerio 5-door
2002-2004
Aerio Sedan
2002-2004
Grand Vitara
2003-2011
Kizashi
2010-2013
SX4
2007-2013
XL-7
2003-2006
Amplified Applications
HONDA
Pilot
(without factory subwoofer)
2003-2008
SUZUKI
SX4
2007-2013
SiriusXM Radio Dock & Play Vehicle Kit
Move your Dock & Play Radio from another location to listen in your vehicle with one subscription
Hear SiriusXM through your existing vehicle stereo with easy do-it-yourself installation
Compatible with SiriusXM, XM and Sirius Dock & Play Radios working on either the XM or Sirius network
If you want to hear your SiriusXM programming through your vehicle stereo, this kit provides all you need.
Using PowerConnect™and the color-coded dock, installation is a snap and now you'll be listening satellite radio in a second car.
DIN or DDIN Aftermarket Radio Installation Dash-Kit for Select 2000-2001 Audi A4 Vehicles
This stereo installation kit has been engineered to help you install either a 2” tall (Single-DIN) or a 4” tall (Double-DIN) aftermarket radio into the original vehicle dashboard. This dash kit makes radio replacement simple and comes with a pocket that can be installed above or below the 2” radio to fill the extra space in the radio opening, which can be used for storage. The pocket is not needed when installing a 4” tall radio. The dash kit is contoured and textured to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 2” or 4” tall aftermarket radio
Contoured and textured to compliment the factory dash
Interchangeable design allows for the recessed Single-DIN opening to be above or below the included pocket
Two sets of our 86-9001 radio removal tool are recommended for easier removal of the factory radio from the dash
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and detailed installation instructions
* NOTE: Once the Double-DIN kit is installed, the factory dash will need to be removed if the dash kit or aftermarket radio should need to be replace
Applications
AUDI
A4, S4
w/ Symphony radio
2000-2001
Metra 99-9105 Installation Manual
Add-On Amplifier OEM Integration Interface for Select 2013-UP Chrysler, Dodge, Jeep, Maserati and RAM Vehicles
This latest version of the Pac-Audio AmpPRO simplifies the installation of upgraded amplifiers in select non-amplified and amplified sound systems With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features.
Benefits
Simplifies amplifier installation
Prevents need for summing and DSP devices
Provides factory sound system upgrade solution
Provides flat audio output for a solid audio foundation
Features
Can be used to upgrade the entire sound system or just part of it thanks to retention of the original amplifier
Enables the addition of a subwoofer to an amplified sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, Navigation prompts, and all warning chimes
Plug-n-Play installation
Sub level controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
52-pin harness (MS-CAN)
Bass knob with harness
Manual
Also available for fast, easy install: APH-CH01 harness (sold separately)
Select non-amplified vehicles are equipped with an ANC system that requires bypass. Plug-n-Play bypass harness: ANC-CH01
Applications
Compatible with both amplified and non-amplified factory systems.
Jeep Cherokee, Chrysler 200, and Maserati: These vehicles must be equipped with a factory amplifier as the AP4 cannot reprogram the factory radio to think that an amplifier is present.
When installing into any of the following vehicles, the APHCH42 is required (sold separately):
CHRYSLER
200
ALL TRIM LEVELS
2015-2017
300
ALL TRIM LEVELS
2015-2022
PACIFICA
ALL TRIM LEVELS
2017-2022
DODGE
CHALLENGER
ALL TRIM LEVELS
2015-2022
CHARGER
ALL TRIM LEVELS
2015-2022
DURANGO
ALL TRIM LEVELS
2014-2020
DURANGO
ALL TRIM LEVELS w/10.1" Screen
2021
DURANGO
ALL TRIM LEVELS w/8.4" Screen
2021
RAM TRUCK
ALL TRIM LEVELS
2013-2021
RAM TRUCK
NON-CLASSIC
2022
JEEP
CHEROKEE
ALL TRIM LEVELS
2015-2021
GLADIATOR
ALL TRIM LEVELS
2020-2022
GRAND CHEROKEE
ALL TRIM LEVELS
2014-2020
GRAND CHEROKEE
WK
2021-2023
WRANGLER
JL
2018-2023
WRANGLER
4XE
2021-2022
WRANGLER
ALL TRIM LEVELS
2024
WRANGLER UNLIMITED
JL
2018-2023
WRANGLER UNLIMITED
ALL TRIM LEVELS
2024
MASERATI
LEVANTE
ALL TRIM LEVELS
2018
QUATTROPORTE
ALL TRIM LEVELS
2017
RAM
RAM TRUCK
ALL TRIM LEVELS
2013-2021
RAM TRUCK
NON-CLASSIC
2022
Pac Audio AP4-CH41 R.2 ManualPac Audio AP4-CH41 ANC and Amplifier LocationsPac Audio AP4-CH41 R.2 Technical Bulletin
ECHO Remote Upgrade kit with 2-way Communication and a 1-button remote. 1,500 ft of Range
The Omega ECHO upgrade kits are modular two-way remote controller transceivers that simply plug into any compatible Omega vehicle security system. The ECHO-1 upgrade kit will put the status of your vehicle at your finger tips. This powerful transceiver extends operating range to as much as 1,500 feet so every command can be confirmed, even when your vehicle is out of sight. The ECHO-5 is compatible with any "E, EDP, or EDPB" system.Features:• Flashing LED and audible confirmation for remote start and unlock• 433 MHZ super heterodyne technology• Up to 1,500 feet of range• Uses 1 CR2032 battery• Beep & mute modes• Runtime expiration warning • Antenna with integrated LED's & valet
Single Seat Heater Kit with Hi/Low Settings. Save $50 on the installation of a new seat heater, with purchase and installation of a new Automatic Remote Start System in your vehicle.
Single Seat Heater Kit
Carbon Fiber Technology
Illuminated 3 Position Switch
OE Build Grade
2 - 18'' X 9'' Trimable Pads
3yr Warranty
Double-DIN Size Head-Unit Replacement Dash-Kit for Select 2010-2014 Subaru-Outback and Legacy Vehicles
This stereo installation kit is engineered to help you install an aftermarket 4" tall (Double-DIN) radio into the original vehicle dashboard. This dash kit helps make radio replacement simple and is painted scratch-resistant silver to match the original look and feel of the vehicle's dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 4" tall aftermarket radio with an ISO-mount provision
Painted scratch-resistant silver 95-8903S (also available in scratch-resistant matte black: 95-8903B)
Designed for models without factory navigation
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes mounting brackets with detailed installation instructions
A tech support number is available for installation help 7 days a week
Applications
SUBARU
Legacy
w/ factory amp
2012-2014
Legacy
w/o factory amp (display radio)
2012-2014
Legacy
w/o factory amp (base radio)
2012-2014
Legacy
2010-2011
Outback
w/ factory amp
2012-2014
Outback
w/o factory amp (display radio)
2012-2014
Outback
w/o factory amp (base radio)
2012-2014
Outback
2010-2011
Metra 95-8903 Installation Manual
DIN-Size Head-Unit Replacement Dash-Kit for Select 1982-2000 GMC, Ford, Jeep, Lincoln, Mazda and Mercury Vehicles
This stereo installation kit has been engineered to help you install a 2" tall (Single-DIN) aftermarket radio into the original vehicle dashboard, making radio replacement simple. The dash kit is designed to match the original look and feel of the vehicle's dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash kit to make it fit.
Professional Installer Series TurboKit designed to fit any standard 2” tall aftermarket radio
The Metra 86-5618 radio removal tool is required to pull the factory radio from the dash
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes factory-style rear support, brackets, and hardware parts needed with detailed installation instructions
A tech support number is available for installation help 7 days a week
Applications
FORD
Aerostar
1985-1997
Bronco
1987-1996
Bronco II
1985-1990
Crown Victoria
1992-1994
Econoline
1992-1996
Escort
1985-1996
Escort EXP
1985-1996
Explorer
1991-1994
F-Series
1987-1996
F-250/350
1997
Festiva
1988-1993
LTD
1982-1991
LTD Crown Victoria
1982-1991
Mustang
1994-2000
Probe
1993-1997
Ranger
1983-1994
Taurus
1986-1995
Tempo
1989-1994
Thunderbird
1983-1988
Windstar
1995-1998
LINCOLN
Continental
1985-1994
Mark VII
1984-1992
Mark VIII
1993-1994
Town Car
1985-1994
MAZDA
626
1993-2000
B-Series Pickup
1994
MX-3
1992-1996
MX-6
1993-1997
Navajo
1991-1993
Protégé
1995-2000
MERCURY
Capri
1991-1994
Cougar
1983-1997
Grand Marquis
1979-1994
Lynx
1985-1987
Marquis
1979-1986
Sable
1986-1995
Topaz
1989-1994
Tracer
1988-1996
Villager
1993-1995
JEEP
Cherokee
1984-1996
Comanche
1985-1992
Wrangler
1984-1996
Metra 99-5510 Installation Manual
DIN or DDIN-Size Head-Unit Replacement Dash-Kit for Select 2005-2011 Toyota-Tacoma Vehicles, textured gray
This stereo installation kit has been engineered to help you install either a 2” tall (Single-DIN) or a 4” tall (Double-DIN) aftermarket radio into the original vehicle dashboard. This dash kit makes radio replacement simple and comes with a pocket that is installed below the 2” radio to fill the extra space in the opening, which can be used for storage. The pocket is not needed when installing a 4” tall radio. The dash kit is painted gray and “golf ball” textured to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 2” or 4” (with an ISO-mount provision) tall aftermarket radio utilizing our patented quick-release, snap-in ISO mount system with custom trim ring
Painted gray and “golf ball” textured (also available in black: 99-8214TB)
Factory climate controls are retained in their current location
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
Applications
TOYOTA
Tacoma
w/ gray color dash
2005-2011
Metra 99-8214TB Installation Manual
DIN-Size Head-Unit Replacement Dash-Kit for Select 1974-2003 Chrysler, Dodge, Eagle, Ford, Jeep, and Plymouth Vehicles
This stereo installation kit has been engineered to help you install a 2” tall (Single-DIN) aftermarket radio into the original vehicle dashboard, making radio replacement simple. The dash kit is designed to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 2” tall aftermarket radio utilizing our patented “Side Arm Support System” for radio side support
Provides a recessed radio opening with an adjustable depth feature
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and the hardware parts needed with detailed installation instructions
A tech support number is available for installation help 7 days a week
Applications
CHRYSLER
Cordoba
1975-1983
E-Class
1983-1984
Fifth Avenue
1979-1993
Horizon
1978-1983
Imperial
1990-1993
Laser
1984-1989
LeBaron
1977-1995
LeBaron GTS
1984-1995
Newport
1977-1980
New Yorker
1975-1996
Town & Country
1990-2000
DODGE
Aries
1981-1989
Aspen
1976-1980
Avenger
1995-2000
Caravan
1984-2000
Charger
1974-1987
Dakota
1987-2000
Daytona
1984-1993
Diplomat
1980-1989
Durango
1998-2000
Dynasty
1988-1993
Lancer
1986-1989
Mirada
1979-1983
Neon
1995-1999
Omni
1978-1990
Ram Pickup 1500
1994-2001
Ram Pickup 2500, 3500
1994-2002
Ram Pickup 150, 250, 350
1974-1993
Ram Charger
1981-1993
Ram Van
1978-2003
Shadow
1987-1994
Spirit
1989-1995
St. Regis
1979-1981
EAGLE
Vision
1993-1997
JEEP
Cherokee
1997-2001
Grand Cherokee
1993-1998
Wrangler
1997-2002
PLYMOUTH
400
1982-1983
600E Class
1983-1987
Acclaim
1989-1995
Caravelle
1985-1988
Gran Fury
1978-1989
Horizon
1984-1990
Neon
1995-1999
Reliant
1981-1989
Sundance
1987-1994
TC3
1981-1982
Trail Duster
1975-1981
Turismo
1983-1987
Volare
1976-1980
Voyager
1984-2000
Metra 99-6501 Installation Manual
Add-on or Replacement Tailgate-Handle Style Backup-Camera for Select 2009-2018 Ram Pickups
Add an unobtrusive rear-view backup camera that matches your vehicles factory tailgate with iBeams new replacement tailgate handle camera. A 150 degree viewing angle with 0.5 LUX night vision and defeatable parking lines offer added visibility for drivers to see what is behind them. A 1/3 inch CMOS camera provides a sharp clear picture during the day or night. A 26 foot harness is included to connect the camera to your aftermarket radio (radio not included) for video input.
CMOS 1/4 sensor
Resolution: 400 TV lines
Field of view: Diagonal 168, Horizontal 136, vertical 100
0.1 Lux
IP69
Defeatable parking lines
26 feet of extension cable
3 Year warranty
Applications
RAM
1500
2009-2018
2500
2010-2018
iBeam TE-DGH Manual
Add-on or Replacement Tailgate-Handle Style Backup-Camera for Select 2007-2019 Mercedes-Sprinter and VW-Crafter Vehicles
Metra's iBeam 1/3 inch CMOS third brake light backup camera fits Mercedes Sprinter or Volkswagen Craft models 2007 – 2019. The sleek water resistant design is a direct replacement for OEM factory brake lights offering a perfect fit. With a 170 degree viewing angle built-in microphone and 0 lux IR LED night vision this camera provides a clear representation of all activity directly behind the vehicle under any conditions. Defeatable parking lines allow drivers to maneuver their vehicle with confidence. Includes all necessary cables for installation – with a 4-Pin Din to RCA adapter as an added bonus.
Specifications:
Direct replacement for OEM third brake light
Water resistant design
1/3 inch CMOS camera
170 degree viewing angle
0 lux IR LED night vision
Defeatable parking lines
Includes 10 meter video cable with 4-Pin Din connector
Includes 4-Pin Din to RCA adapter cable
Built-in microphone
Applications
MERCEDES
Sprinter
2019 - Shop Confirmed
Sprinter
2007-2018
VOLKSWAGEN
Crafter
2007-2018
iBeam TE-3BMC Manual
Head-Unit Replacement Adapter Cable for Select 1973-2017 Audi, BMW, Mercedes VW and Other Vehicles
If you are replacing the radio in your vehicle, this antenna cable adapter ensures that you can continue to use your factory antenna. It is a simple yet necessary cable that adapts the vehicle’s original antenna cable to plug into an aftermarket radio with a male Motorola™ connector on one end and a female Volkswagen/Audi European-style connector on the other.
Antenna adapter cable
Used to adapt the vehicle’s antenna cable to use with an aftermarket radio
Male Motorola™ connector on one end
Female Volkswagen/Audi European-style connector on the other end
Enter your vehicle model to see if this is compatible with your vehicle
NOTE: Some newer European radios also have capacitors which do not allow this adaptor to work properly, use 40-VW12
Applications
AUDI
80 Series
1988-1992
90 Series
1988-1995
100 Series
1989-1994
200 Series
1989-1991
A4
1996-1997
A6
1998-2001
S8
2000-2003
A8
1997-2003
allroad quattro
2001-2003
BMW
3 Series
1992-2006
ALPINA D10
1997-2000
5 Series
1990-2000
7 Series
1990-2001
M
1998-2002
M3
1995-2006
M5
1991-1993
Z3
1996-2002
Z8
2000-2003
BUICK
LeSabre
2000-2005
CADILLAC
CTS
2003-2007
CTS-V
2003-2007
SRX
2004-2006
DODGE
Sprinter
2007-2009
FORD
Focus
2003-2004
Transit Connect
2010-2012
FREIGHTLINER
Sprinter
2007-2013
LAND ROVER
Freelander
2002-2005
Range Rover
1995-2002
MERCEDES
Sprinter
w/Radio Delete only
2010-2017
MERCURY
Cougar
1999-2002
OLDSMOBILE
Aurora
2001-2003
PONTIAC
Bonneville
2000-2005
GTO
2004-2006
PORSCHE
911 (996)
1999-2002
911 (993)
1994.5-1998
911
1973-1994
928
1994-1996
968
1992-1996
Boxter (986)
1997-2004
RAM
ProMaster
2014-2017
SAAB
9-2x
2005
9-3
1999-2006
9-5
1998-2005
SMART
ForTwo
2008-2015
VOLKSWAGEN
Cabrio
1995-2002
Corrado
1990-1993
Euro Van
1993-2003
Golf
1986-1997
GTI
1986-1994
Jetta
1993-1997
Passat
1990-1997
Quantum
1982-1987
Tailgate-Mountable Backup-Camera for Select 1997-2004 Ford F-150 and 1999-2007 F-150 Super-Duty Pickups
Upgrade the factory tailgate handle with an unobtrusive rearview backup camera. This CMOS .25” sensor provides a sharp, clear picture and is rated IP69. With a wide field of view, 0.1 lux night vision and defeatable parking lines, it allows the driver to backup their vehicle day or night with confidence.
Fits Ford F-150 1997-2005 & Super Duty 1999-2007
Replaces OE handle
CMOS 1/4 sensor
Resolution: 400 TV lines
Field of view: diagonal 168 degrees, horizontal 136 degrees, Vertical 100 degrees
0.1 LUX
IP69
defeatable parking lines
26 ft extension cable
3 year warranty
Applications
FORD
F-150
1997-2004
F-250, F-350, F-450, F-550
SuperDuty
1999-2007
iBeam TE-FDFTG Manual
Composite RCA to Direct Camera Adaptor for Alpine Head Units
Add an additional universal camera to your Alpine Head Unit with the KCX-CAM1 Additional Composite RCA to Direct Camera Adaptor (universal camera sold separately). The KCX-CAM1 is compatible with all Alpine Head Units that include a Direct Camera Input.
While all Alpine Head Units with Direct Camera Input include one Composite RCA to Direct Camera Adaptor, an adaptor is now available to purchase separately to add an additional universal camera to your vehicle for increased safety during your drive or assistance when maneuvering in and out of parking spots.
DIN or DDIN-Size Head-Unit Replacement Dash-Kit for Select 2014-2020 Dodge Durango Vehicles
ISO DIN radio provision with pocket
ISO DDIN radio provision
HVAC Interface and wiring harness included
Built-in ASWC-1 technology retains steering wheel controls
Painted black to match factory finish.
Touchscreen display for climate and personalization features
Wiring and Antenna Connections
Harness
Axxess interface built into touchscreen
Antenna Adapter
Included with kit
Steering wheel control interface
Included with kit
Applications
DODGE
Durango
2014-2020
Metra 99-6537B Installation Manual
Factory Backup-Camera Retention for Select 2006-2013 Toyota Vehicles
Retains the factory backup camera to an aftermarket radio
Allows an aftermarket camera to be added to the OEM screen (Display and navigation model radios only)
6-volt camera turn-on included
Backup Camera Retention Applications
TOYOTA
4-Runner (w/Amp)
2012-2013
4-Runner
2006-2011
Avalon
2011-2012
Camry
2007-2011
Highlander
2008-2012
Prius
2010-2011
Sequoia (w/AMP)
2008-2012
Sequoia ( NAV)
2012-2012
Tundra (w/Factory Amp)
2007-2013
Venza (NAV)
2009-2012
Add Camera to Factory Radio Applications
TOYOTA
4-Runner (w/ AMP)
With Amplifier
2012-2013
4-Runner
2006-2011
Avalon
2011-2012
Camry
2007-2011
Highlander
2008-2012
Prius
2010-2011
Sequoia (w/AMP)
w/ Amplifier
2013-2013
Sequoia (w/NAV)
w/ Navigation
2008-2012
Tundra (w/AMP)
w/ Amplifier
2007-2019
Axxess Interface AXBUCH-T26V Manual
DDIN Size Head-Unit Replacement Dash Kit for Select 2013-2018 Toyota Rav4 Vehicles
This stereo installation kit is engineered to help you install an aftermarket 4" tall (Double-DIN) radio into the original vehicle dashboard. This dash kit helps make radio replacement simple and is painted gray to match the original look and feel of the vehicle's dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 4" tall aftermarket radio with an ISO-mount provision
Painted gray to match the factory finish
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
Wiring and Antenna Connections:
Wiring Harness
70-1761 (sold separately)
TYTO-01 (amplified models)(sold separately)
Antenna Adapter
40-LX11 (sold separately)
Applications
TOYOTA
Rav4 (non-EV)
2013-2018
Metra 95-8242G Installation Manual
DIN Sized Automotive Stereo Replacement Dash Kit for Select 1994-2004 Land Rover Vehicles. Designed to allow you to fit a DIN Head Unit into your Land Rover.
Applications
LAND ROVER
Discovery
1994-2004
Discovery II
2000-2004
Metra 89-9400 Installation Manual
DDIN Size Head-Unit Replacement Dash Kit for Select 2003-2011 Lincoln Town-Car Vehicles
This stereo installation kit is engineered to help you install an aftermarket 4" tall (Double-DIN) radio into the original vehicle dashboard. This dash kit helps make radio replacement simple and is designed to match the original look and feel of the vehicle's dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 4" tall aftermarket radio
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes mounting brackets and detailed installation instructions
Wiring and Antenna Connections
Harness
70-5520 (sold separately)
70-5521 (sold separately)
Applications
LINCOLN
Town Car
2003-2011
Metra 95-5810 Installation Manual
Flip-down Overhead Smart-TV Ready Entertainment System with a 10.1-Inch Screen
10.1" Hi-Res Digital LED Back-lit Monitor
HDMI Input to connect smart devices such as Smartphones & streaming sticks enabling access to your favorite apps
USB Input for Digital Media Playback. (USB will also provide charging for Smartphones or Power for HDMI Streaming Sticks)
Built-In DVD Player
Audio Video Input
Audio Video Output
Built-In Voltage Stabilizer for Vehicles Equpped with Fuel Savings Mode (start/stop)
Built-In Dome Lights
100 Channel Wireless FM Modulator (Transmits Audio through Vehicle Sound System)
FM Out (for adding an optional FM Adapter to hardwire the FM transmitter Model: FMDIRB)
Mounting Bracket & Hardware Included
Includes Three Snap-on Bezels in Black, Shale and Pewter
Remote Control
Voxx Electronics VXMTG10 ManualVoxx Electronics VXMTG10 Installation Manual
Replacement Six-Inch to 6-3/4-Inch Door Speaker Trim Ring Adapter for Select 2001-2007 Toyota Vehicles
Mounting adapter
For 6-6.75 inch speakers
Front door location
Sold as a pair
Applications
TOYOTA
Sequoia
2003-2007
Sequoia
2001-2002
Tundra
w/o JBL
crew cab
2004-2006
Double-DIN Size Stereo-Replacement Dash-Kit for Select 1998-2002 Dodge RAM Vehicles
This stereo installation kit is engineered to help you install an aftermarket 4" tall (Double-DIN) radio into the original vehicle dashboard. This dash kit helps make radio replacement simple and is custom textured to match the original look and feel of the vehicle's dashboard. Modifications to the dashboard are required for this installation and instructions are included. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 4" tall aftermarket radio
Custom textured for a factory-like appearance
Dashboard modifications are necessary
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes cutting template, brackets and hardware parts needed with detailed installation instructions
Applications
DODGE
Ram Pickup 1500
1998-2001
Ram Pickup 2500, 3500
1998-2002
Metra 95-6551 Installation Manual
