At this present time our store location is open by appointment only.

Automotive Speakers and Subwoofers with a 2-Ohm Voice Coil

Automotive Speakers and Subwoofers with a 2-Ohm Voice Coil

5 products

  • Alpine R2-DB8V-TRK : Dual 8" Loaded Under Seat Subwoofer Enclosure with Amp Space, 750W @ 2Ω Jeep and other Pickups Alpine R2-DB8V-TRK : Dual 8" Loaded Under Seat Subwoofer Enclosure with Amp Space, bottom side.

    Alpine R2-DB8V-TRK : Dual 8" Loaded Under Seat Subwoofer Enclosure with Amp Space, 750W @ 2Ω Jeep and other Pickups

    Pre-Order Today!

    From towing to travel, you depend on your truck to get you where you want to go, but can you rely on getting the best performance from your sound system? Now you can add deep, accurate bass in your truck without compromising valuable cabin space with the new R2-DB8V-TRK dual 8” Alpine Halo R-Series preloaded truck subwoofer enclosure with the ProLink system and amplifier space. The enclosures were intentionally crafted to fit most full-size trucks. Two 8” subwoofers are preloaded into a compact enclosure for under the seat installation and linked with a ProLink bracket that can adjust from 51”-40”. Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine’s S-A75M Mono Power Amplifier (sold separately). Rubber “feet” are adjustable in height to accommodate uneven truck floors.  These ported subwoofer enclosures feature the next-generation 8” R-Series subwoofers with a more powerful motor that creates deeper bass while Alpine’s High Amplitude Multi-Roll (HAMR) surround technology allows the subwoofer cone to efficiently move air while staying cool for incredible accuracy. A new ceramic composite dust cap has higher heat resistance that ensures non-stop bass performance. Alpine’s new preloaded truck subwoofer enclosures join the Alpine Halo family with a premium, unmistakable design. The enclosure pulls design cues from the Alpine Halo display with unique, curved edges outlined by a silver trim and a front link bracket cover with an Alpine logo badge. The 5/8” MDF enclosures are covered in a premium black carpet that will elevate the look of your truck. With two preloaded R2-W8D2 8” R- Series subwoofers that are tuned to 36Hz, R2-DB8V-TRK is optimized to perform with Alpine’s R-Series sound system line. Dual voice coils are wired in parallel for a 2Ω load that’s compatible with Alpine’s R-Series R2-A75M mono power amplifier. Features Groundbreaking Alpine Halo Design  ProLink™ Ported Enclosure Expandable Width from 40" to 51"  Compact, Under-the-Seat Installation in Most Full-Size Trucks Integrated Amplifier Tray (not applicable with all vehicles) Rubber, Modular Stackable Foot Design Accommodates Uneven Truck Floor Areas Ported Enclosures with High-Performance S-Series Subwoofers   Front Link Alpine Branded Bracket Side-Firing Cabin Loading Ports Premium Alpine Wire Terminals CARB Compliant 5/8" MDF Construction  Premium Black Carpet  Specifications Dimensions: 40"-51" (Adjustable Width) x 8-3/4” (H) x 13-3/4” (D) 750W RMS Frequency Response: 32Hz-200Hz  Sensitivity: 84dB  Dual voice coils Wired in Parallel for a 2Ω Load (Compatible with R-A75M) Vented Enclosure Tuning Frequency: 36Hz   Custom spring-loaded speaker terminals fit up to 12AWG speaker wire  Alpine R2-DB8V-TRK BrochureAlpine R2-DB8V-TRK Manual

    Pre-Order Today!

    $799.99

  • Alpine S-DB8V-TRK : Dual 8" Loaded Under Seat Subwoofer Enclosure with Amp Space, 600W @ 2Ω Jeep and other Pickups Alpine S-DB8V-TRK : Dual 8" Loaded Under Seat Subwoofer Enclosure with Amp Space, bottom side.

    Alpine S-DB8V-TRK : Dual 8" Loaded Under Seat Subwoofer Enclosure with Amp Space, 600W @ 2Ω Jeep and other Pickups

    Pre-Order Today!

    S-Series Dual Loaded 600-Watt 8-Inch 2-Ohm Subwoofer Enclosure for Select Jeep Wrangler-JL Gladiator-JT and other Pickup Vehicles From towing to travel, you depend on your truck to get you where you want to go, but can you rely on getting the best performance from your sound system? Now you can add deep, accurate bass in your truck without compromising valuable cabin space with the new S-DB8V-TRK dual 8” Alpine Halo S-Series preloaded truck subwoofer enclosure with the ProLink system and amplifier space. The enclosures were intentionally crafted to fit most full-size trucks. Two 8” subwoofers are preloaded into a compact enclosure for under the seat installation and linked with a ProLink bracket that can adjust from 51”-40”. Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine’s S-A60M Mono Power Amplifier (sold separately). Rubber “feet” are adjustable in height to accommodate uneven truck floors.  The enclosures are designed for the unique cabin environment of your truck. The ported subwoofer enclosures feature Alpine’s reliable 8” S-Series subwoofers. The subwoofers are designed with an improved voice coil that brings out the full potential of the subwoofer. The custom-stamped steel frame is designed to withstand the rigors of the strong S-Series motor. Frame leg vents, as well as a vented backplate, keep the subwoofer cool for non-stop bass performance. Alpine’s new preloaded truck subwoofer enclosures join the Alpine Halo family with a premium, unmistakable design. The enclosure pulls design cues from the Alpine Halo display with unique, curved edges outlined by a silver trim and a front link bracket cover with an Alpine logo badge. The 5/8” MDF enclosures are covered in a premium black carpet that will elevate the look of your truck. With two preloaded S-W8D2 8” S- Series subwoofers that are tuned to 36Hz, the S-DB8V-TRK is optimized to perform with Alpine’s S-Series sound system line. Dual voice coils are wired in parallel for a 2Ω load that’s compatible with Alpine’s S-Series S-A60M mono power amplifier. Features Groundbreaking Alpine Halo Design  ProLink™ Ported Enclosure Expandable Width from 40" to 51"  Compact, Under-the-Seat Installation in Most Full-Size Trucks Integrated Amplifier Tray (not applicable with all vehicles) Rubber, Modular Stackable Foot Design Accommodates Uneven Truck Floor Areas Ported Enclosures with High-Performance S-Series Subwoofers   Front Link Alpine Branded Bracket Side-Firing Cabin Loading Ports Premium Alpine Wire Terminals CARB Compliant 5/8" MDF Construction  Premium Black Carpet  Specifications Dimensions: 40"-51" (Adjustable Width) x 8-3/4” (H) x 13-3/4” (D) 600W RMS Frequency Response: 34Hz-200Hz  Sensitivity: 84dB  Dual voice coils Wired in Parallel for a 2Ω Load (Compatible with S-A60M) Vented Enclosure Tuning Frequency: 36Hz   Custom spring-loaded speaker terminals fit up to 12AWG speaker wire Alpine S-DB8V-TRK BrochureAlpine S-DB8V-TRK Manual

    Pre-Order Today!

    $699.99

  • JL Audio CP210-W0v3 : Dual 10" Subwoofer Enclosure - 600W RMS 2Ω Ported JL Audio CP210-W0v3 : Dual 10" Subwoofer Enclosure - 600W RMS 2Ω Ported, back side.

    JL Audio CP210-W0v3 : Dual 10" Subwoofer Enclosure, 600W RMS 2Ω Ported

    Pre-Order Today!

    BassWedge-Series Dual 10-Inch 600-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofers to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofers firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 150 - 600WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 600 W System Nominal Impedance 2 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No Physical Specifications External Width (W) 29.61 in / 752 mm External Height (H) 13.77 in / 350 mm External Depth (D1) 17.38 in / 441 mm External Top Surface Depth (D2) 14 in / 356 mm Net Weight 50.7 lb / 23 kg JL Audio CP210-W0v3 Brochure

    Pre-Order Today!

    $399.99

  • JL Audio CS112LG-TW1-2 : 12" Thin Subwoofer Enclosure - 300W RMS 2Ω JL Audio CS112LG-TW1-2 : 12" Thin Subwoofer Enclosure - 300W RMS 2Ω, side view.

    JL Audio CS112LG-TW1-2 : 12" Thin Subwoofer Enclosure, 300W RMS 2Ω

    Pre-Order Today!

    PowerWedge-Series 12-Inch 300-Watt Enclosed Subwoofer System, 2Ω Sealed Enclosure In this low-profile PowerWedge™ subwoofer system, JL harnesses the performance and insanely small box requirements of the TW1 subwoofer driver to deliver amazing sub-bass from an enclosure that is only 6.6 in. (168 mm) deep. This low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 12TW1 and has been fine-tuned through extensive real-world listening. The PowerWedge™ subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the top surface of the enclosure. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 75 - 300WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 2 Ω Enclosure Type Sealed Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 18 in / 457 mm External Height (H) 13.75 in / 349 mm External Depth (D1) 6.625 in / 168 mm Net Weight 26.02 lb / 11.80 kg JL Audio CS112LG-TW1-2 Brochure

    Pre-Order Today!

    $499.99

  • 12" 600W Thin Subwoofer Enclosure, 2Ω or 4Ω : Kicker 46TL7T12 Kicker 46TL7T12 : 12-Inch Thin Loaded Subwoofer Enclosure, 600-Watts RMS, 2-Ohm or 4-Ohm Impedance, input side.

    Kicker 46TL7T12 : 600W 12" Thin Subwoofer Enclosure, 2Ω or 4Ω

    Pre-Order Today!

    12-Inch Thin Loaded Subwoofer Enclosure, 600-Watts RMS, 2-Ohm or 4-Ohm Impedance Barely seven inches deep, the Kicker TL7T 10-Inch thin subwoofer enclosure is perfect for big bass under or behind your seats. Genuine Kicker L7T subwoofer included Angled design for excellent fit Heavy internal bracing Single 2-Ohm or 4-Ohm terminal Easy to install and wire Thick black carpeting Rounded corners Embroidered Kicker logo Thick MDF construction Specifications Woofer [in, cm] Solo-Baric L7T 12" 2 Ω or 4Ω Impedance [Ohms] 2 or 4 Recommended Amplifier Power [watts RMS] 600 SENSITIVITY [dB 1w/1m] 86.54 Box Top Depth (in, cm): 4-3/8, 11.2 Box Bottom Depth (in, cm): 7-3/4, 19.6 Box Height (in, cm): 13-3/4, 35 Box Width (in, cm): 21-1/2, 54.6 What's in the box? one loaded enclosure with one 12-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers Kicker L7T Subwoofer Enclosure Manual

    Pre-Order Today!

    $349.99

Login

Forgot your password?

Don't have an account yet?
Create account