On Sale / Clearance

Single 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2004-2014 Chevrolet-Colorado or GMC-Canyon Extended-Cab Trucks CLICK HERE TO VIEW SUBWOOFERS THAT FIT THIS BOX! Accu-Tuned 10” Single vented subwoofer enclosure designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers. OEM-Fit is designed and engineered specifically for the 2004-2014 Chevrolet / GMC trucks to ensure an OEM fit without impeding the operation of the back seat. High-Grade MDF for Ultimate structural rigidity and no-flex construction. 1.1 Cubic Feet Gross and 1.0 Net Volume internal net air space are ideal for tight accurate bass reproduction. Subwoofer Mounting Depth is 6.25” which is ideal for full size and lower profile subwoofers. Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly. Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber. Premium OEM Grade Carpeting for factory look and durability. Dimensions Sub Cut Out: 9.125”, Mounting Depth: 6.25”, Width: 27.25”, Height: 8.75”, Depth: 11.875” Specifications Configuration: Single Vented Finish: Charcoal Carpeted Width: 27.25" Height: 8.25" Depth: 11.88" Max Mounting Depth: 6.25" Gross VolumePer Sub: 1.35 Net Volume Per Sub: 1.00

Read more less

Dual 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2007-2014 Chevrolet-Silverado or GMC-Sierra Extended-Cab Trucks CLICK HERE TO VIEW SUBWOOFERS THAT FIT THIS BOX! Custom downfire fit under rear seat. Fits bench style, 60/40 style seats Designed specifically for 2007-2014 Chevy Silverado and GMC Sierra Extended Cab Trucks Dual 10" Subwoofer Enclosure Premium Carpet Finish 3/4" Mounting Baffle Hardwood MDF construction Rounded edges Glued and Braced construction Subwoofer mounting depth: 6.25" Box volume: 0.8 cubic feet (per chamber) Specifications Width 52.75 Height 6.875 Depth 11.875 Mounting Depth 6.25 Gross Cubic Feet Per Side 0.8 Net Cubic Feet Per Side 0.8 Excursion 3.625

Read more less

Single 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 1999-2007 Chevrolet-Silverado or GMC-Sierra Extended-Cab Pickups CLICK HERE TO VIEW SUBWOOFERS THAT FIT THIS BOX! Custom downfire fit under rear driver side seat. No modification required. Doesn't affect rear seat latching. Single 10" Subwoofer Enclosure Designed specifically for 1999-2007 Chevy Silverado and GMC Sierra Extended Cab Trucks Premium Carpeted Finish 3/4" Mounting Baffle Hardwood MDF construction Rounded edges Glued and Braced construction Subwoofer mounting depth: 7.25" Box volume: 0.93 cubic feet (per chamber) Specifications Width 24 Height 9.125 Depth 14.75 Mounting Depth 7.25 Gross Cubic Feet Per Side 0.93 Net Cubic Feet Per Side 0.93 Excursion 1.625

Read more less

Dual 12-Inch Sealed Carpeted Subwoofer-Enclosure With AMP Space for Select 2007-2013 Chevrolet-Silverado and GMC-Sierra Crew-Cab Pickups CLICK HERE TO VIEW SUBWOOFERS THAT FIT THIS BOX! Accu-Tuned 12” Dual sealed subwoofer enclosure with designated amp room designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers. OEM-Fit is designed and engineered specifically for the 2007 - 2013 Chevrolet / GMC Silverado / Sierra Crew Cab to ensure an OEM fit without impeding the operation of the back seat. High-Grade MDF for Ultimate structural rigidity and no-flex construction. 0.83 Cubic Feet Net Volume internal air space per sub is ideal for tight accurate bass reproduction. Subwoofer Mounting Depth is 6.5” which is ideal for lower profile subwoofers. Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly. Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber. Premium OEM Grade Carpeting for factory look and durability. Dimensions Sub cut out: 9.125”, Mounting Depth: 6.5”, Width: 52.5”, Height: 6.75”, Depth: 17.75” Specifications Configuration: Dual Sealed Finish: Charcoal Carpeted Width: 52.50" Height: 6.75" Depth: 14.75" Max Mounting Depth: 6.50" Gross VolumePer Sub: 1.30 Net Volume Per Sub: .65 Installation Note: This amp space box makes installing your amp and subs simple, fast, and easy. Almost downright enjoyable. Just mount your amp on the shelf, run your wires and call it a day. The amp space is 14" wide by 17" long. Longer amps can actually run off the box in the back if needed. You can also drill thru the shelf to help hide some of the wires as shown to the left. Not only does this box look and fit great, but it adds a whole new dimension of functionality and usability. 

Read more less

Alpine S-Series 6X9-Inch Coaxial 2-Way Speakers, 85-Watt RMS The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. Alpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection. Specificatons 85W RMS/260W Peak Nominal Impedance 4Ω Frequency Response: 65-22kHz 1” Silk Dome Tweeter CFRP (Carbon Fiber Reinforced Plastic) Cone H.A.M.R. Surround CustomStamped Steel Frame 35mm voice coil Optional grille sold separately (KTE-S69G)

Read more less

Amplified Head-Unit Replacement Wiring-Harness Interface for Select 2000-2013 GM Vehicles Provides accessory power (12-volt 10-amp) Retains R.A.P. (Retained Accessory Power) Used in amplified systems Retains chimes and balance and fade Provides NAV outputs (parking brake, reverse, mute and speed sense) Pre-wired AXSWC harness (AXSWC sold separately) Retains OnStar®/OE Bluetooth® Adjustable gain control for chimes and OnStar® High-level speaker input USB updatable Applications BUICK Century 2004-2005 LaCrosse (aka Allure in Canada) 2005-2009 Rainier 2004-2007 Rendezvous 2002-2007 Terraza 2005-2007 CADILLAC Escalade 2003-2006 Escalade ESV 2003-2006 Escalade EXT 2003-2006 CHEVY Avalanche 2003-2006 Cavalier 2000-2005 Colorado 2004-2012 Corvette 2005-2013 Express 2003-2007 Impala 2000-2005 Malibu 2001-2005 Monte Carlo 2000-2005 Silverado Classic 2007 Silverado 2003-2006 SSR 2003-2006 Suburban 2003-2006 Tahoe 2003-2006 Trailblazer 2002-2009 Uplander 2005-2008 Venture 2000-2005 GMC Canyon 2004-2012 Envoy 2002-2009 Savana 2003-2007 Sierra Classic 2007 Sierra 2003-2006 Yukon 2003-2006 Yukon XL 2003-2006 HUMMER H2 2003-2007 H3 2006-2010 ISUZU Ascender 2003-2008 OLDSMOBILE Alero 2001-2004 Bravada 2002-2004 Intrigue 2002 Silhouette 2000-2004 PONTIAC Aztec 2001-2005 Grand Am 2001-2005 Grand Prix 2004-2008 Montana 2000-2005 Montana SV6 2005-2007 Sunfire 2000-2005 SAAB 9-7x 2005-2009 SATURN Relay 2005-2007 Axxess Interface AXGM-04 Manual

Read more less

Amplified and Non-Amplified Head-Unit Replacement Wiring-Harness Interface for Select 2002-2015 Audi Vehicles This vehicle-specific interface is designed for use when installing an aftermarket radio. It retains R.A.P. (Retained Accessory Power) and provides 12-volt 10-amp accessory power and NAV output for parking brake, reverse, and speed sense. This interface features easy plug-n-play connectivity and a pre-wired harness is included for the AXSWC, which is sold separately. Features: Provides accessory power (12-volt 10-amp) Retains R.A.P. (Retained Accessory Power) Provides wires for multimedia radios (park brake, reverse, speed sense) Prewired AXSWC harness (AXSWC sold separately) Retains balance and fade Micro-B USB updatable Interface Components: AXDI-AI2 interface LD-AX-XSVI-AU1 harness LD-AX-XSVI-AU2 harness Amplified and Non-Amplified Applications AUDI A3 w/ Concert radio 2006-2007 A3 2006-2007 A3 w/ Symphony Plus radio 2006-2007 A3 w/ Symphony radio 2006-2007 A3 2008-2013 A4, RS 4, S4 2007-2008 A4, RS 4, S4 2005-2008 A4, S4 w/ Symphony radio 2002-2005 A4, S4 w/ Symphony Plus radio 2006-2006 A4, S4 w/ Symphony radio 2006-2006 A4, S4 convertible 2009-2009 A6, RS 6, S6 2002-2004 allroad quattro 2004-2005 TT 2002-2006 TT, TTS 2008-2015 Axxess Interface AXVI-9004 Manual

Read more less

Amplified Head-Unit Replacement Wiring Interface-Harness for Select 2002-2010 Chrysler and Dodge Vehicles The CHTO-02 interface is designed to allow the user to replace the OEM radio with an aftermarket unit in amplified 2002-2004 Dodge Ram, 2004-2008 Chrysler Pacifica and retain the use of the OEM amplified audio system. Provides accessory power (12-volt 10-amp) Retains R.A.P. (retained accessory power) Designed for amplified systems Provides NAV outputs (parking brake, reverse, speed sense) Pre-wired ASWC-1 harness (ASWC-1 sold separately) Adjustable gain control for overall volume High level speaker input Retains balance and fade Micro-B USB updatable Applications CHRYSLER Pacifica 2004-2008 DODGE Ram Pickup 1500 2002-2004 Ram Pickup 2500, 3500 2003-2004 Viper 2008-2010 Axxess Interface CHTO-02 Manual - new part#AXTO-CH2

Read more less

Aftermarket Remote-Start and Factory Key Security Box and Trasponder Bypass System Universal immobilizer bypass for a remote start system Compatible with most factory RF immobilizer or transponder systems Requires permanent key mount Temporarily overrides the factory immobilizer Maintains integrity of factory anti-theft system Kit can be tuned for use with European or domestic vehicles

Read more less

W0-Series 10-Inch 300-Watt Subwoofer Driver, 4-Ohm SVC The JL Audio 10" W0v3 subwoofer driver is a rugged performer with excellent excursion capability and linearity while sporting a 2 inch diameter voice coil and JL's patented Elevated Frame Cooling design for enhanced power handling and reliability. This 10 inch subwoofer is best used with an amplifier in the 75W - 300W range and is optimized to operate in a compact 0.65 cu. ft. (18.4 l) sealed enclosure, or a 1.125 cu. ft. (31.9 l) ported enclosure. General Specifications Continuous Power Handling (RMS) 300W RMS Recommended Amplifier Power (RMS) 75W - 300W RMS Nominal Impedance (Znom) 4Ω JL Audio 10W0v3 Manual

Read more less

W1-Series 10-Inch 300-Watt Subwoofer Driver, 2-Ohm SVC The JL Audio 10" W1v3 subwoofer driver is a very suitable option when space is limited with smaller amplifiers. It features a low mounting depth of 4.6 inches and a compact motor structure that allows it to comfortably fit in tight mounting locations. There is no pole vent on the rear of the subwoofer which allows the motor structure to be placed directly against an enclosure boundary.  Excellent excursion capability and linearity allow the 10W1v3 to reproduce sub-bass with shocking extension and quality. The JL Audio 10W1v3 is best used with an amplifier in the 75W - 300W RMS range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure. General Specifications Continuous Power Handling 300W RMS Recommended Amplifier Power 75W - 300W RMS Nominal Impedance 2Ω JL Audio 10W1v3 Manual

Read more less

W3-Series 10-Inch 500-Watt Subwoofer Driver, 2-Ohm SVC The JL Audio 10W3v3 subwoofer driver has excellent power handling, reasonable enclosure requirements, and a long excursion for its chassis to deliver excellent bass reproduction in 500W RMS power applications. JL Audio technologies and proprietary assembly designs in the 10W3v3-2 and 10W3v3-4 subwoofers enhance linearity and reliable performance results. The JL Audio 10W3v3 is best used with an amplifier in the 150W - 500W RMS range and is optimized to operate in a compact 0.625 cu. ft. (17.7  l) sealed enclosure, or a 1.25 cu. ft. (35.4 l) ported enclosure. General Specifications Continuous Power Handling 500W RMS Recommended Amplifier Power 150- 500W RMS Nominal Impedance 2Ω JL Audio 10W3v3 Manual

Read more less

W0-Series 12-Inch 300-Watt Subwoofer Driver, 4-Ohm SVC The 12" W0v3 subwoofer driver by JL Audio delivers excellent efficiency, excursion capability and linearity. This 12" subwoofer comes with a price point under $150.00 while supporting a beefy 2 in. diameter voice coil and JL's patented Elevated Frame Cooling design for enhanced power handling and reliability. The JL Audio 12W0v3-4 sub is best used with amplifier power in the 75W - 300W range and is optimized to operate in a moderately sized 1.375 cu. ft. (38.9 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure. General Specifications Continuous Power Handling 300W RMS Recommended Amplifier Power 75W - 300W RMS Nominal Impedance 4Ω JL Audio 12W0v3 Manual

Read more less

W1-Series 12-Inch 300-Watt Subwoofer Driver, 2-Ohm or 4-Ohm SVC The 12" W1v3 automotive subwoofer driver by JL Audio is a lightweight 12-inch driver with excellent performance capabilities at a moderate 300-Watts. The design of the chassis allows an average mounting depth with no pole-vent on the back side of the magnet so the rear of the motor structure can be placed directly against an enclosure boundary. This 12" subwoofer can reproduce sub-bass with shocking extension and quality. The JL Audio 12W1v3-2 and 12W1v3-4 subwoofers are best used with an amplifier in the 75W - 300W range and is optimized to operate in a compact 1.10 cu. ft. (31.5 l) sealed enclosure.  General Specifications Continuous Power Handling 300W RMS Recommended Amplifier Power 75W - 300W RMS Nominal Impedance 2Ω JL Audio 12W1v3 Manual

Read more less

TW1-Series 400-Watt Amplified 10-Inch Ported Subwoofer System With MicroSub+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes JL's exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency. Key to the enclosure’s performance is its efficient slot-ported design and precise tuning of its 10TW1 subwoofer driver. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems. Note: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Amplifier power: Built-in DCD™ Class D amplifier (400 W @ 0.25 Ω)Nominal Impedance: 0.25 Ω General Specifications Continuous Power Handling (RMS) Built-in amplifier 400 W @ 0.25 Ω System Nominal Impedance 0.25 Ω Input Voltage Range @ RCA Inputs 70 mV - 1.40 V RMS Input Voltage Range @ High-Level Inputs 280 mV - 5.4 V RMS Recommended Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 30 A (ATO or ATC) Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh JL Audio MicroSub+/PowerWedge+ Manual

Read more less

C2-Series 6x9" 70-Watt  3-Way Coaxial Speaker System The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs. The C2-690tx system features 6 x 9-inch (150 x 230 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. The 6 x 9-inch (150 x 230 mm) format is a direct fit in many vehicles. The Mid-Range driver is ferrofluid-cooled, with a 2-inch Mylar® cone diaphragm to smoothly bridge the gap between the woofer and the dome tweeter. Tweeters are mounted next to the mid-range driver and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles. Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair. General Specs Continuous Power Handling (RMS) 70 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 15 - 125 W / Ch. System Efficiency 93 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 53 Hz - 22 KHz ± 3 dB JL Audio C2-690tx Manual

Read more less

BassWedge-Series 10-Inch 300-Watt Enclosed Subwoofer System, 4Ω Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 75 - 300WNominal Impedance: 4 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No Physical Specifications External Width (W) 15.51 in / 394 mm External Height (H) 13.77 in / 350 mm External Depth (D1) 17.38 in / 441 mm External Top Surface Depth (D2) 14 in / 356 mm Net Weight 29 lb / 13.15 kg JL Audio CP110-W0v3 Brochure

Read more less

BassWedge-Series 12-Inch 300-Watt Enclosed Subwoofer System, 4Ω Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 75 - 300WNominal Impedance: 4 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No Physical Specifications External Width (W) 16.31 in / 414 mm External Height (H) 15.18 in / 386 mm External Depth (D1) 20.3 in / 516 mm External Top Surface Depth (D2) 15.75 in / 400 mm Net Weight 33.1 lb / 15 kg JL Audio CP112-W0v3 Brochure

Read more less

JD-Series Monoblock Amplifier, 1000-Watt @ 2-Ohm or 600-Watt @ 4-Ohm Designed to produce a serious 1000 watts into 2 ohms (14.4V, 1% THD), the JD1000/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. JL Audio's proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion. The JD1000/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.  The JD1000/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat. General Specifications @ 4 Ω 600 W RMS x 1 @ 3 Ω 800 W RMS x 1 @ 2 Ω 1000 W RMS x 1 Frequency Response 7 Hz - 500 Hz (+0, -1dB) S/N Ratio, referred to highest rated power >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >1000 / 50 Hz Damping Factor @ 2 Ω >500 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 80 A (AFS, AGU or MaxiFuse™) Filter Mode(s) Low-Pass only Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer No Filter Defeat Function No Infrasonic Filter No Bass Boost EQ Yes Output Polarity Switch No Remote Subwoofer Level Control Optional (RBC-1) Remote Bass EQ Boost Control No Pass-Through Preamp Output Buffered JL Audio JD1000/1 Manual

Read more less

JD-Series Monoblock Amplifier, 250-Watt @ 2-Ohm or 150-Watt @ 4-Ohm Designed to produce a healthy 250 watts into 2 ohms (14.4V, 1% THD), the JD250/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. JL Audio's proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion. The JD250/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.  The JD250/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you easily set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat. General Specifications @ 4 Ω 150 W RMS x 1 @ 3 Ω 200 W RMS x 1 @ 2 Ω 250 W RMS x 1 Frequency Response 7 Hz - 500 Hz (+0, -1dB) S/N Ratio, referred to highest rated power >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >60 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >1000 / 50 Hz Damping Factor @ 2 Ω >500 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min.Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 30 A (AFS, AGU or MaxiFuse™) Filter Mode(s) Low-Pass only Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer No Filter Defeat Function No Infrasonic Filter No Bass Boost EQ Yes Output Polarity Switch No Remote Subwoofer Level Control Optional (RBC-1) Remote Bass EQ Boost Control No Pass-Through Preamp Output Buffered JL Audio JD250/1 Manual

Read more less

JD-Series 75-Watt x 4-Channel Class-D Full-Range Amplifier Utilizing JL Audio's exclusive NexD™ high-speed switching technologies, the JD400/4 amplifier is engineered to deliver loads of clean power, with excellent efficiency and low distortion. This little guy churns out 100 watts of audio from each of its four channels into 2 ohms (14.4V, 1% THD) and is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a whopping 200W x 2 into 4 ohms. The JD400/4’s controls can be found on the input panel of the amplifier, with all speaker and power connections located along the opposite end of the extruded aluminum chassis. Signal processing features include high or low-pass 12 dB / octave filters (defeatable) for each channel pair, with continuously variable frequency selection from 50-500 Hz, and dual-range, differential-balanced inputs capable of accepting line-level or speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard equipment. Onboard LED-clipping indicators are also included surrounding each input sensitivity control. This convenient feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. You will also find a set of buffered, pass-through preamp outputs on-board, so you can pass signals to another amplifier. General Specifications @ 4 Ω 75 W RMS x 4 @ 2 Ω 100 W RMS x 4 Bridged @ 4Ω 200 W RMS x 2 Frequency Response 12 Hz - 22 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >150 / 50 Hz Damping Factor @ 2 Ω >75 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 40 A (AFS, AGU or MaxiFuse™) Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers No Filter Defeat Function Yes Remote Level Control No Remote Level Modes N/A Channel Input Mode Switch Yes (2/4 ch.) Pass-Through Preamp Output Buffered Source Channel Selection for PreOuts No (always 2 Ch) JL Audio JD400/4 Manual

Read more less

JD-Series Monoblock Amplifier, 500-Watt @ 2-Ohm or 250-Watt @ 4-Ohm Designed to produce a whopping 500 watts into 2 ohms (14.4V, 1% THD), the JD500/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. JL Audio's proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion. The JD500/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.  The JD500/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat. General Specifications @ 4 Ω 250 W RMS x 1 @ 3 Ω 350 W RMS x 1 @ 2 Ω 500 W RMS x 1 Frequency Response 7 Hz - 500 Hz (+0, -1dB) S/N Ratio, referred to highest rated power >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >60 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >1000 / 50 Hz Damping Factor @ 2 Ω >500 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™) Filter Mode(s) Low-Pass only Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer No Filter Defeat Function No Infrasonic Filter No Bass Boost EQ Yes Output Polarity Switch No Remote Subwoofer Level Control Optional (RBC-1) Remote Bass EQ Boost Control No Pass-Through Preamp Output Buffered JL Audio JD500/1 Manual

Read more less

10-Inch 400-Watt Subwoofer Driver, 4-Ohm DVC  The 43CWR10 10" subwoofer by Kicker has an advanced suspension system that includes a ribbed polypropylene surround and a large-diameter spider for linear movement, and a distortion-free sound. Bigger magnets, a thicker cone and an improved suspension system help make this 10-Inch 400W CompR sub to be a workhorse of a driver.The Kicker 43CWR104 12" sub work best with a sealed or ported enclosure and 400 watts of recommended power. Specifications SIZE [in, cm]: 10, 25 IMPEDANCE [Ohms]: 4 DVC Recommended Amplifier Power (watts RMS) 400 Peak Power (watts, per ANSI/CTA-2031-A) 800 SENSITIVITY [dB 1w/1m]: 84.6 MOUNTING DEPTH [in, cm]: 5-1/4, 13.3 MOUNTING DIAMETER [in, cm]: 9-1/8, 23.1 MIN SEALED BOX VOL [cu. ft, L]: 0.8, 22.7 MAX SEALED BOX VOL [cu. ft, L]: 1.25, 35.4 MIN VENTED BOX VOL [cu. ft, L]: 1.25, 35.4 MAX VENTED BOX VOL [cu. ft, L]: 1.75, 49.6 Kicker CompR Subwoofer Manual

Read more less

12-Inch 500-Watt Subwoofer Driver, 4-Ohm DVC The 43CWR12 12" subwoofer by Kicker has an advanced suspension system that includes a ribbed polypropylene surround and a large-diameter spider for linear movement, and a distortion-free sound. Bigger magnets, a thicker cone and an improved suspension system help make this 12-Inch 500W CompR sub to be a workhorse of a driver.The Kicker 43CWR124 12" sub work best with a sealed or ported enclosure and 500 watts of recommended power. Specifications SIZE [in, cm]: 12, 30 IMPEDANCE [Ohms]: 4 DVC Recommended Amplifier Power (watts RMS) 500 Peak Power (watts, per ANSI/CTA-2031-A) 1000 SENSITIVITY [dB 1w/1m]: 86.9 MOUNTING DEPTH [in, cm]: 5 3/4, 14.6 MOUNTING DIAMETER [in, cm]: 11, 27.9 MIN SEALED BOX VOL [cu. ft, L]: 1.0, 28.3 MAX SEALED BOX VOL [cu. ft, L]: 2.0, 56.64 MIN VENTED BOX VOL [cu. ft, L]: 1.75, 49.6 MAX VENTED BOX VOL [cu. ft, L]: 2.25, 63.7 Kicker CompR Subwoofer Manual

Read more less

8-Inch 300-Watt Thin Subwoofer Driver, 2-Ohm DVC The CompRT 8" thin subwoofer by Kicker is a weather resistant thin sub with a 2Ω dual voice coil design. This thin 8 inch sub magnet structure delivers 300W RMS of power with a chassis mounting depth of just under 2 3/4". The Kicker designed UniPlate™ back plate and solid pole piece serve as a single heat-absorbing unit to keep this 8" CompRT thin subwoofer driver nice and cool.The CompRT 8-Inch subwoofer works best with a sealed or ported enclosure and 300 watts of recommended power. Specifications SIZE [in, cm]: 8, 20 IMPEDANCE [Ohms]: 2 DVC Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 SENSITIVITY [dB 1w/1m]: 81.8 MOUNTING DEPTH [in, cm]: 2 11/16, 6.7 MOUNTING DIAMETER [in, cm]: 7, 17.7 MIN SEALED BOX VOL [cu. ft, L]: 0.2, 5.66 MAX SEALED BOX VOL [cu. ft, L]: 1.0, 28.32 MIN VENTED BOX VOL [cu. ft, L]: 0.8, 22.7 MAX VENTED BOX VOL [cu. ft, L]: 1.2, 34 Kicker CompR Subwoofer Manual

Read more less

12-Inch 300-Watt Subwoofer Driver, 4-Ohm SVC or 4-Ohm DVC This CompC 12" sub driver from Kicker has a thick stamped steel basket that holds an injection-molded polypropylene cone with stabilizing ribs in the surround. The 44CWCS124 and 44CWCD124 12-Inch subs are available in a 4Ω Single Voice or 4Ω Dual Voice coil design with spring loaded speaker terminals. These CompC drivers are rated for 300W RMS of amplified power. Specifications Size (IN.,CM) 12, 30 Impedance (OHMS) 4 SVC or 4 DVC Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 Sensitivity (dB 1w/1m) 88.3 Frequency Response (Hz) 27-500 Mounting Depth (in, cm) 5-3/8, 13.6 Mounting Cutout (in, cm) 11, 27.9 Min Sealed Box Vol (cu. ft, L) 1.25, 35.4 Max Sealed Box Vol (cu. ft, L) 3.5, 99.1 Min Vented Box Vol (cu. ft, L) 1.75, 49.6 Max Vented Box Vol (cu. ft, L) 2.25, 63.7 Kicker CompC Subwoofer Manual

Read more less

M6-Series High-Definition Front and Rear Facing Dash-Camera Recording-System with WiFi-Connectivity Wi-Fi enabled Full HD (1080p) dash camera system including front camera, rear camera, GPS antenna, and 32GB micro-SD memory card. Protection On and Off the RoadThe Momento M6 is a smart dash cam that provides 270° of surveillance coverage – and records footage that you can view from the Momento smartphone app! What is a "Smart" Dash Cam?The M6 is Momento’s first dash cam that connects to your smartphone by creating a small and secure Wi-Fi hotspot inside your vehicle that only you can access through the Momento App.  In addition to giving you easy access to your video files, the Momento App also provides additional driving insights such as speed, location and trip data. An Extra Set of Eyes On the RoadYou’re a safe, responsible driver, but accidents happen: Luckily, Momento’s got you covered: Driving Mode - Continuously records everything at the front and rear of your vehicle while driving. Impact Sensors - Stores 15 seconds before and after any impact or shock your vehicle experiences. Parking Mode - Even when you're parked, the M6 has motion sensors that trigger recordings. Exceptional Low-light SensitivityThe M6 records in Full HD, giving you crystal clear footage in 1080p. Additionally, the M6 is equipped with a Sony Exmor-R image sensor that is enhanced with STARVIS, the industry-standard for surveillance applications, ensuring low-light performance. Massive Upgradeable StorageThe M6 includes a 32GB micro-SD card that can be upgraded to any Class 10 micro-SD card up to 256GB. That’s twice as much as our leading competitors! Plus, its easy-to-use file management system best utilizes your storage while ensuring your most important videos stay saved. IMPORTANT NOTE:High-capacity SD cards require specific formatting in order to work with the Momento M6. 2-Year WarrantyThe M6 is protected by a 2-Year manufacturer’s Warranty. This warranty covers both front and rear cameras, and protects your purchase from defects or malfunctioning parts*. *Does not cover labor nor installation.

Read more less

Omega Add-on Customizable Remote Start System for Select Key-Turn-Start Vehicles, Operated with Factory Remote Activates from almost any existing keyless entry or security system Includes status light and override switch Remote start compatible with gas or diesel engines! Selectable engine run times! Low voltage & low temp auto starting Rear defrost activation output Turbo timer - 1, 2, or 3 minute run time! Enhanced audible remote start diagnostics VIRTUAL ALARM Flashing light output. Optional anti-grind feature to protect your starter. Silent pit-stop operation 2 data ports -- auto-detects protocol! RK-Kit upgrade compatible Linkr-LT compatible Limited Lifetime warranty on all components. Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

Read more less

1-Button 2-Way Battery Operated Remote Start and Keyless Entry System with 3000-Feet of Range One 1-button 2-way controller, one 1-button 1-way controller 3D motion sensor for manual transmission safety Onboard temp sensor Low current RS harness available (P/N: H-RS6BLC) 5 onboard relays for maximum flexibility Dual data ports Limited lifetime warranty on all components Vehicle learn – auto-matches ignition switch sequence! Auto-detects optimal crank time in tachless mode Low temp auto crank adjust Low/high temp auto start Low voltage auto start Supports iDatalink & DBI protocols Human panic horn honk alert Remote start timer Stick shift compatible Turbo timer Run time extender Simultaneous horn, hank, & siren alert XL pit stop mode – runs for 12 hours The RS-276-3D offers the latest in security and convenience technology. When upgraded with Omega’s ECHO 2-way technology, you can keep the status of your vehicle right at your fingertips! Intuitive ECHO upgrade reporting gives you real-time alerts for all security and convenience functions. The built-in remote start capability will keep your vehicle warm in the winter and cool in the summer. Our state-of-the-art vehicle security platform offers unsurpassed vehicle protection that can only be offered by Excalibur’s 30+ year legacy.

Read more less

Deluxe Battery Powered LED 2-Way Remote Start & Keyless Entry System, with 3000-Feet of Range Qty 1 - Omega Excalibur RS-475-3D Remote Start 2-way LED controller included 4-button, 1-way transmitter included  Up to 3,000 ft of range ECHO compatible Multi-vehicle capability Powered by the RS-X70 module 3D motion sensor for manual transmission safety Dual data ports - now auto-detect protocol independently Vehicle Learn Mode - faster than programming! Self-diagnoses RS connections Low Vehicle Battery Alert Full Security Suite built-in Random Horn Honk Alert Data shock sensor compatible Displays vehicle interior temp on remote Stick shift compatible XL Pit Stop Mode - runs for 12 hours The RS-475-3D offers the latest in security and convenience technology. Equipped with Omega’s ECHO 2-way technology, you can keep the status of your vehicle right at your fingertips from up to 3,000 feet away! Intuitive reporting gives you real-time alerts for all security and convenience functions. The built-in remote start capability will keep your vehicle warm in the winter and cool in the summer. Our state-of-the-art vehicle security platform offers unsurpassed vehicle protection that can only be offered by Excalibur’s 30+ year legacy. Qty 1 - Omegalink Transponder Bypass Module Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

Read more less

Web-Programmable Remote Start Solution for Select Chrysler, Dodge, Jeep, RAM and VW Vehicles Qty 1- Omegalink OL-RS-CH4 Chrysler/Dodge/Jeep/RAM/VW RF Style Remote Start The OL-RS-CH4 is a web-programmable, standalone remote start solution for Chrysler ‘Tipstart’ models 2008 and up. Supports remote start from factory transmitter by pressing 3 X LOCK. Includes custom t-harness for ‘plug & play’ installation. Can be paired with compatible range-extender kit sold separately.  NOTE: This system does not have firmware loaded when new. It must be flashed by an authorized Omega Dealer before installation is possible. Click Here to View Vehicle Coverage Information Note: Features may vary depending on vehicle year, make, and model. Please consult your installer for more information. Downloadable Software Feature Selection Advanced Feature Programming V2 Door Lock Priority Unlock Door Unlock Trunk/Hatch Release Arm OEM Alarm Disarm OEM Alarm Aftermarket Alarm Ctrl from OEM remotes Horn Ctrl (wire) Door Stat Output Trunk Stat Output Data Immobilizer Bypass Parking Light Ctrl Tachometer Output Brake Pedal Stat Output E-Brake Output RAP Shutdown Ctrl Data/MUX Keysense Ctrl Data/MUX Accessory Ctrl Data/MUX Ignition Ctrl Data/MUX Starter Ctrl 3XLOCK start w/ standalone module Qty 1 - Your choice of Extended Range Remote Control None - 1-Way Operation with factory key fab by pressing the Lock Button 3 times. - Limited to Factory Fab Operating Range OL-RF-15-SST - 2-Way 1-Button Add-on RF Style Remote Start Remote Control - 3000' Range OL-RF-42-SST - 2-Way 5-Button Add-on RF Style Remote Start Remote Control - 3000' Range CarLink - Add-on RF Style Cellular Remote Start Remote Control - 1.5 Mile Range LINKR-LT2 - Add-on Cellular Remote Start Controller, data plan required - Cell Tower Range Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

Read more less

Web-Programmable Remote Start Solution for Select Chrysler, Dodge, Jeep and RAM Vehicles QTY 1 - Omegalink OL-RS-CH5 - Chrysler/Dodge/Jeep/RAM RF Style Remote Start System The OL-RS-CH5 is a web-programmable, standalone remote start solution for Chrysler non-‘Tipstart’ models 2005 and up. Supports remote start from factory transmitter by pressing 3 X LOCK. Includes custom t-harness for ‘plug & play’ installation. Can be paired with compatible range extender kit sold separately. NOTE: This system does not have firmware loaded when new. It must be flashed by an authorized Omega Dealer before installation is possible. Note: Features may vary depending on vehicle year, make, and model. Please consult your installer for more information. Click Here to View Vehicle Coverage Information Features: Downloadable Software Feature Selection Advanced Feature Programming V2 Door Lock Priority Unlock Door Unlock Trunk/Hatch Release Arm OEM Alarm Disarm OEM Alarm Aftermarket Alarm Ctrl from OEM remotes Horn Ctrl (wire) Door Stat Output Trunk Stat Output Data Immobilizer Bypass Parking Light Ctrl Tachometer Output Brake Pedal Stat Output E-Brake Output RAP Shutdown Ctrl Data/MUX Keysense Ctrl Data/MUX Accessory Ctrl Data/MUX Ignition Ctrl Data/MUX Starter Ctrl 3XLOCK start w/ standalone module Qty 1 - Your choice of Extended Range Remote Control None - 1-Way Operation with factory key fab by pressing the Lock Button 3 times. - Limited to Factory Fab Operating Range OL-RF-15-SST - 2-Way 1-Button Add-on RF Style Remote Start Remote Control - 3000' Range OL-RF-42-SST - 2-Way 5-Button Add-on RF Style Remote Start Remote Control - 3000' Range CarLink - Add-on RF Style Cellular Remote Start Remote Control - 1.5 Mile Range LINKR-LT2 - Add-on Cellular Remote Start Controller, data plan required - Cell Tower Range Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

Read more less

Web-Programmable Remote Start Solution for Select Ford, Lincoln, Mazda and Mercury Vehicles Qty 1 - Omegalink OL-RS-F01 - RF Style Add-on Remote Start System Remote start solution for selected Ford/Lincoln/Mercury/Mazda models 2006 and up. A compatible range-extender kit may be required and sold separately. The OL-RS-FO1 is a web-programmable, standalone remote start solution for selected Ford/Lincoln/Mercury/Mazda models 2006 and up. Includes custom t-harness for easy installation. A compatible range-extender kit may be required and sold separately. NOTE: This system does not have firmware loaded when new. It must be flashed by an authorized Omega Dealer before installation is possible. Click Here to View Vehicle Coverage InformationNote: Features may vary depending on vehicle year, make, and model. Please consult your installer for more information. Downloadable Software Feature Selection Advanced Feature Programming V2 Door Lock Door Unlock Trunk/Hatch Release Arm OEM Alarm Disarm OEM Alarm Horn Ctrl (wire) Door Stat Output Trunk Stat Output Data Immobilizer Bypass Hood Stat Output Parking Light Ctrl Tachometer Output Brake Pedal Stat Output E-Brake Output RAP Shutdown Ctrl 3XLOCK start w/ standalone module Qty 1 - Your choice of Extended Range Remote Control None - 1-Way Operation with factory key fab by pressing the Lock Button 3 times. - Limited to Factory Fab Operating Range OL-RF-15-SST - 2-Way 1-Button Add-on RF Style Remote Start Remote Control - 3000' Range OL-RF-42-SST - 2-Way 5-Button Add-on RF Style Remote Start Remote Control - 3000' Range CarLink - Add-on RF Style Cellular Remote Start Remote Control - 1.5 Mile Range LINKR-LT2 - Add-on Cellular Remote Start Controller, data plan required - Cell Tower Range Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

Read more less

Web-Programmable Remote Start Solution for Select GM Vehicles Qty 1 - Omegalink OL-RS-GM10 - RF Style Remote Start System Remote start solution for GM 'SWC' full-size models 2006 and up. Supports remote start from factory transmitter by pressing 3 X LOCK. The OL-RS-GM10 is a web-programmable, standalone remote start solution for GM 'SWC' full-size models 2006 and up. Supports remote start from factory transmitter by pressing 3 X LOCK. Includes custom t-harness for ‘plug & play’ installation. Can be paired with compatible range extender kit sold separately. Click Here to View Vehicle Coverage Information NOTE: This system does not have firmware loaded when new. It must be flashed by an authorized Omega Dealer before installation is possible. Note: Features may vary depending on vehicle year, make, and model. Please consult your installer for more information. Downloadable Software Feature Selection Advanced Feature Programming V2 Door Lock Priority Unlock Door Unlock Trunk/Hatch Release Power Liftgate Tailgate Window Release Arm OEM Alarm Disarm OEM Alarm Aftermarket Alarm Ctrl from OEM remotes Horn Ctrl (wire) Door Stat Output Trunk Stat Output Heated Seat Ctrl Data Immobilizer Bypass Hood Stat Output Tachometer Output Brake Pedal Stat Output E-Brake Output RAP Shutdown Ctrl 3XLOCK start w/ standalone module Qty 1 - Your choice of Extended Range Remote Control None - 1-Way Operation with factory key fab by pressing the Lock Button 3 times. - Limited to Factory Fab Operating Range OL-RF-15-SST - 2-Way 1-Button Add-on RF Style Remote Start Remote Control - 3000' Range OL-RF-42-SST - 2-Way 5-Button Add-on RF Style Remote Start Remote Control - 3000' Range CarLink - Add-on RF Style Cellular Remote Start Remote Control - 1.5 Mile Range LINKR-LT2 - Add-on Cellular Remote Start Controller, data plan required - Cell Tower Range Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

Read more less

Web-Programmable Remote Start Solution for Select Buick, Chevy, GMC Vehicles Qty 1 - Omegalink OL-RS-GM7 RF Style Remote Start System The OL-RS-GM7 is a web-programmable, standalone remote start solution for GM 'flip-key' models 2010 and up. Includes custom t-harness for ‘plug & play’ installation. A compatible range-extender kit is required and sold separately. NOTE: This system does not have firmware loaded when new. It must be flashed by an authorized Omega Dealer before installation is possible. Note: Features may vary depending on vehicle year, make, and model. Please consult your installer for more information. Click Here to View Vehicle Coverage Information Downloadable Software Feature Selection Advanced Feature Programming V2 Door Lock Priority Unlock Door Unlock Trunk/Hatch Release Power Liftgate Tailgate Window Release Arm OEM Alarm Disarm OEM Alarm Aftermarket Alarm Ctrl from OEM remotes Horn Ctrl (wire) Door Stat Output Trunk Stat Output Heated Seat Ctrl Data Immobilizer Bypass Hood Stat Output Tachometer Output Brake Pedal Stat Output E-Brake Output RAP Shutdown Ctrl 3XLOCK start w/ standalone module Qty 1 - Your choice of Extended Range Remote Control None - 1-Way Operation with factory key fab by pressing the Lock Button 3 times. - Limited to Factory Fab Operating Range OL-RF-15-SST - 2-Way 1-Button Add-on RF Style Remote Start Remote Control - 3000' Range OL-RF-42-SST - 2-Way 5-Button Add-on RF Style Remote Start Remote Control - 3000' Range CarLink - Add-on RF Style Cellular Remote Start Remote Control - 1.5 Mile Range LINKR-LT2 - Add-on Cellular Remote Start Controller, data plan required - Cell Tower Range Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

Read more less

MM-Series 420-Watt RMS 12-Inch Subwoofer Driver, 4-Ohm SVC Specifications Qty Included : 1 Driver Enclosure Type : Ultra-Marine Certified Driver Complement: (1) 12" (30.48 cm) d (Round) - Subwoofer Shape : Round Diameter : 11.1" (28.19 cm) Full-Range Mounting Depth - Top Mount : 4.65" (11.81 cm) Full-Range Mounting Depth - Bottom Mount : 5.2" (13.21 cm) Total Frequency Response : 26 Hz → 200 Hz Nominal Impedance : 4 ohms Sensitivity (1 watt @ 1 meter) : 87 dB Continuous Power Handling : 420W Peak Power Handling : 1260W Drivers Warranty : 1 years Polk Audio MM1 Subwoofer Manual

Read more less

Smartphone Controlled Remote Start System for Select Key-Turn-Start Vehicles Qty 1 - Extreme Range CarLink 2-Way Remote From Voxx Electronics No monthly fees Connects via Bluetooth directly to the antenna and/or the long range remote True 2-way communication powered by LoRa™ technology Real-time Bluetooth® communication interaction with your smartphone with rapid response 2-way LED remote with over 1.5 miles of operating range Micro USB rechargeable Li-On battery (cable not included) Compatible with most digital remote start and security systems Compatible with android & iOS Smartphones Qty 1 - Omega Excalibur RS-170-B - Add-on Customizable Remote Start System Activates from almost any existing keyless entry or security system Includes status light and override switch Remote start compatible with gas or diesel engines! Selectable engine run times! Low voltage & low temp auto starting Rear defrost activation output Turbo timer - 1, 2, or 3 minute run time! Enhanced audible remote start diagnostics VIRTUAL ALARM Flashing light output. Optional anti-grind feature to protect your starter. Silent pit-stop operation 2 data ports -- auto-detects protocol! RK-Kit upgrade compatible Linkr-LT compatible Limited Lifetime warranty on all components. Qty 1 - Omegalink Blade Style Remote Start Bypass Module Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

Read more less

Smartphone Controlled Remote Start System for Select Push-Button-Start Vehicles Qty 1 - Extreme Range CarLink 2-Way Remote From Voxx Electronics No monthly fees Connects via Bluetooth directly to the antenna and/or the long range remote True 2-way communication powered by LoRa™ technology Real-time Bluetooth® communication interaction with your smartphone with rapid response 2-way LED remote with over 1.5 miles of operating range Micro USB rechargeable Li-On battery (cable not included) Compatible with most digital remote start and security systems Compatible with android & iOS Smartphones Qty 1 - Omega OL-MDB-ALL - Add-on Customizable Remote Start Transponder Bypass Flashable Doorlock and Immobilizer Bypass module (KLON Compatible). Supports remote start from OEM remote by pressing the lock button 3x. Compatible with aftermarket RF kit for long range connectivity. Use with your existing Factory Remote. You will press the lock button 3-times on your factory remote to start your vehicle. Distance is limited by the distance of your factory remote. Lifetime Warranty with our add-on Professional Remote Start installation. Lifetime warranty on our un-altered installation Lifetime warranty on the remote start and bypass system

Read more less

Add-on Cell-Phone Booster with 5G Connectivity for all Passenger Vehicles and Trucks Drive-Reach is weBoost's powerful multi-user, in-vehicle cell signal booster for all passenger vehicle classes. It’s designed to reach cell towers at distances up to 74% farther than the Drive X. With its durable magnetic antenna, the Drive-Reach stops dropped calls while improving voice quality, data speeds, streaming ability, and more while on the open road.  The weBoost Drive-Reach works on all U.S. carrier networks and is compatible with all phones and cellular devices as it simultaneously supports multiple users. 5G Compatible - weBoost is committed to the 5G movement, ensuring all their products work with 5G and support the latest in 5G technology. weBoost Drive Reach BrochureweBoost Drive Reach Installation Manual

Read more less

Add-on RV and Camper Cell-Phone Booster with 5G Connectivity Drive Reach RV is weBoost's powerful multi-user, in-vehicle cell signal booster for all RV classes. It’s designed to reach cell towers at distances up to 74% farther than the Drive RX RV With its all-new omni-directional antenna, Drive Reach RV stops dropped calls while improving voice quality, data speeds, video streaming, and more whether at a campsite or on the road. Drive Reach RV works on all U.S. carrier networks and is compatible with all phones and cellular devices as it simultaneously supports multiple users. 5G Compatible - weBoost is committed to the 5G movement, ensuring all their products work with 5G and support the latest in 5G technology. weBoost Drive Reach RV BrochureweBoost Drive Reach RV Installation Guide

Read more less