Add-On Amplifier OEM Integration Interface for Select 2007-2018 Amplified Chrysler, Dodge, Jeep and RAM Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features.
Benefits
Simplifies amplifier installation
It prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it, thanks to the original amplifier's retention.
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, and all warning chimes
Plug & play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
22-pin harness (MS-CAN)
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-CH01 harness (sold separately)
Applications
This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer.
CHRYSLER
TOWN & COUNTRY
ALL TRIM LEVELS
2008-2016
DODGE
CHALLENGER
ALL TRIM LEVELS
2008-2014
CHARGER
ALL TRIM LEVELS
2008-2010
DURANGO
ALL TRIM LEVELS
2009, 2011-2013
GRAND CARAVAN
ALL TRIM LEVELS
2008-2018
RAM TRUCK
ALL TRIM LEVELS
2009-2012
JEEP
GRAND CHEROKEE
ALL TRIM LEVELS
2008-2013
WRANGLER
ALL TRIM LEVELS
2007-2017
WRANGLER
JK
2018
WRANGLER UNLIMITED
ALL TRIM LEVELS
2007-2017
WRANGLER UNLIMITED
JK
2018
RAM
RAM TRUCK
ALL TRIM LEVELS
2010-2012
Pac Audio AP4-CH21 Manual
Add-On Amplifier OEM Integration Interface for Select 2011-2016 Amplified Chrysler, Dodge and Maserati Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features.
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, and all warning chimes
Plug & play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
22-pin harness (Dual MS-CAN)
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-CH01 harness (sold separately)
Applications
This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer.
CHRYSLER
300
ALL TRIM LEVELS
2011-2014
DODGE
CHARGER
ALL TRIM LEVELS
2011-2014
JOURNEY
ALL TRIM LEVELS
2011-2015
MASERATI
GHIBLI
ALL TRIM LEVELS
2015
QUATTROPORTE
ALL TRIM LEVELS
2014-2016
Pac Audio AP4-CH31 Manual
Add-On Amplifier OEM Integration Interface for Select 2013-UP Chrysler, Dodge, Jeep, Maserati and RAM Vehicles
This latest version of the Pac-Audio AmpPRO simplifies the installation of upgraded amplifiers in select non-amplified and amplified sound systems With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features.
Benefits
Simplifies amplifier installation
Prevents need for summing and DSP devices
Provides factory sound system upgrade solution
Provides flat audio output for a solid audio foundation
Features
Can be used to upgrade the entire sound system or just part of it thanks to retention of the original amplifier
Enables the addition of a subwoofer to an amplified sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, Navigation prompts, and all warning chimes
Plug-n-Play installation
Sub level controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
52-pin harness (MS-CAN)
Bass knob with harness
Manual
Also available for fast, easy install: APH-CH01 harness (sold separately)
Select non-amplified vehicles are equipped with an ANC system that requires bypass. Plug-n-Play bypass harness: ANC-CH01
Applications
Compatible with both amplified and non-amplified factory systems.
Jeep Cherokee, Chrysler 200, and Maserati: These vehicles must be equipped with a factory amplifier as the AP4 cannot reprogram the factory radio to think that an amplifier is present.
When installing into any of the following vehicles, the APHCH42 is required (sold separately):
CHRYSLER
200
ALL TRIM LEVELS
2015-2017
300
ALL TRIM LEVELS
2015-2022
PACIFICA
ALL TRIM LEVELS
2017-2022
DODGE
CHALLENGER
ALL TRIM LEVELS
2015-2022
CHARGER
ALL TRIM LEVELS
2015-2022
DURANGO
ALL TRIM LEVELS
2014-2020
DURANGO
ALL TRIM LEVELS w/10.1" Screen
2021
DURANGO
ALL TRIM LEVELS w/8.4" Screen
2021
RAM TRUCK
ALL TRIM LEVELS
2013-2021
RAM TRUCK
NON-CLASSIC
2022
JEEP
CHEROKEE
ALL TRIM LEVELS
2015-2021
GLADIATOR
ALL TRIM LEVELS
2020-2022
GRAND CHEROKEE
ALL TRIM LEVELS
2014-2020
GRAND CHEROKEE
WK
2021-2023
WRANGLER
JL
2018-2023
WRANGLER
4XE
2021-2022
WRANGLER
ALL TRIM LEVELS
2024
WRANGLER UNLIMITED
JL
2018-2023
WRANGLER UNLIMITED
ALL TRIM LEVELS
2024
MASERATI
LEVANTE
ALL TRIM LEVELS
2018
QUATTROPORTE
ALL TRIM LEVELS
2017
RAM
RAM TRUCK
ALL TRIM LEVELS
2013-2021
RAM TRUCK
NON-CLASSIC
2022
Pac Audio AP4-CH41 R.2 ManualPac Audio AP4-CH41 ANC and Amplifier LocationsPac Audio AP4-CH41 R.2 Technical Bulletin
Add-On Amplifier OEM Integration Interface for Select 2007-2014 Amplified Ford and Lincoln Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features.
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains Sync, Bluetooth audio, and all warning chimes
Plug & play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
24-pin (MS-CAN)
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-FD01 harness (sold separately)
Applications
This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system. If you are unsure of your vehicle having an amplified system, please contact an authorized Ford service center for further clarification.
FORD
F-150
ALL TRIM LEVELS
2009-2012
FLEX
ALL TRIM LEVELS
2009-2012
FUSION
ALL TRIM LEVELS
2010-2012
TAURUS
ALL TRIM LEVELS
2010-2012
LINCOLN
MKS
ALL TRIM LEVELS
2009-2012
MKT
ALL TRIM LEVELS
2010-2012
MKX
ALL TRIM LEVELS
2007-2010
MKZ
ALL TRIM LEVELS
2007-2012
NAVIGATOR
ALL TRIM LEVELS
2007-2014
Pac Audio AP4-FD11 Manual
Add-On Amplifier OEM Integration Interface for Select 2011-2020 Amplified Ford and Lincoln Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features.
Benefits
Simplifies amplifier installation
Prevents need for summing and DSP devices
Provides factory sound system upgrade solution
Features
Can be used to upgrade the entire sound system or just part of it thanks to retention of original amplifier
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains Sync, Bluetooth audio and all warning chimes
Plug & play installation
Sub level controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
24-pin and 54-pin harness (MS CAN) (Dual MS CAN)
Bass knob
Knob harness
Manual
Also available for fast easy install: APH-FD01 harness (sold separately)
Applications
This product is compatible with data-bus controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers or the subwoofer to confirm that the vehicle has a compatible amplified system. If you are unsure of your vehicle having an amplified system please contact an authorized Ford service center for further clarification.
2018-2019 Super Duty Trucks can have either Sony or B&O systems to be compatible.
2019+ Mustang must have B&O System to be compatible. If the amp looks like the one pictured, it is compatible. The amp can be found in the driver's kick panel. If the system is amplified and not badged then the AP4 is not compatible as this is a completely analog system.
FORD
EDGE
ALL TRIM LEVELS
2015-2017
ESCAPE
ALL TRIM LEVELS
2016
EXPEDITION
ALL TRIM LEVELS
2015-2017
EXPLORER
ALL TRIM LEVELS
2011-2018
F-150
ALL TRIM LEVELS
2013-2017
F-250
ALL TRIM LEVELS
2013-2019
F-350
ALL TRIM LEVELS
2013-2019
F-450
ALL TRIM LEVELS
2013-2019
F-550
ALL TRIM LEVELS
2013-2019
FOCUS
ALL TRIM LEVELS
2012-2017
FUSION
ALL TRIM LEVELS
2013-2016
MUSTANG
ALL TRIM LEVELS
2019-2020
TAURUS
ALL TRIM LEVELS
2013-2015
Pac Audio AP4-FD21 Manual
Add-On Amplifier OEM Integration Interface for Select 2018-UP Amplified Ford Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features.
Benefits
Simplifies amplifier installation
Prevents need for summing and DSP devices
Provides factory sound system upgrade solution
Features
Simplifies amplifier installation in data-bus controlled factory sound systems
Provides variable volume, control, fade, balance, bass, mid, and treble audio settings
Retains warning chimes, navigation prompts, Bluetooth®, and telematics audio (if equipped)
Front, rear, and sub preamp outputs (5V RMS)
Plug-and-play installation with factory-matched harness
Sub level controller included
Optical output included
Applications
Vehicle must be equipped with factory B&O system to be compatible
Factory amplifier must be removed from vehicle when installing this interface
FORD
BRONCO
ALL TRIM LEVELS
2021-2023
BRONCO SPORT
ALL TRIM LEVELS
2021
ECO SPORT
ALL TRIM LEVELS
2021
EDGE
ALL TRIM LEVELS
2019-2022
ESCAPE
ALL TRIM LEVELS
2021-2022
EXPEDITION
ALL TRIM LEVELS
2018-2020
EXPLORER
ALL TRIM LEVELS
2020-2023
F-150
ALL TRIM LEVELS
2018-2023
F-250
ALL TRIM LEVELS
2020-2023
F-350
ALL TRIM LEVELS
2020-2023
F-450
ALL TRIM LEVELS
2020
LIGHTNING
ALL TRIM LEVELS
2022
MAVERICK
ALL TRIM LEVELS
2022
MUSTANG MACH E
ALL TRIM LEVELS
2021
RANGER
ALL TRIM LEVELS
2020-2023
Pac Audio AP4-FD31 Manual
Add-On Amplifier OEM Integration Interface for Select 2014-2019 Amplified Cadillac, Chevy and GMC Vehicles
Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time!
Benefits
Factory sound system upgrade
Time-saving design
Prevents the need for summing and audio correction devices
Reliable PAC quality
Features
Upgrade solution for factory, fixed level, data-bus controlled sound systems
The time-saving design prevents the need for summing and audio correction devices.
Variable volume, fade, balance, bass, mid, and treble audio settings
Retains OnStar, Bluetooth, navigation, safety systems, and all warning chimes
Front, rear, sub, and center channel preamp outputs (5 volt RMS)
Provides full range, flat audio output for a solid audio foundation
Customized OE bass, mid, and treble center frequency selection
Plug-n-play installation
Remote sub level controller INCLUDED
Optional TOSLINK optical output with APA-TOS1 (sold separately)
Includes
AmpPRO module
Harness
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-GM02 harness (sold separately)
Applications
Must have BOSE factory sound system.
Must have Infotainment system RPO code IO5 or IO6 to be compatible.
To verify the "IO" RPO code on your vehicle, check the glove compartment or spare tire well for a silver sticker with these codes. If this sticker is not present, you must scan the QR code on the GM label found in the driver's door jamb. The RPO codes will be listed in alphabetical order in either scenario.
CADILLAC
ATS
ALL TRIM LEVELS
2015
CT6
ALL TRIM LEVELS
2017
ESCALADE
ALL TRIM LEVELS
2015-2019
CHEVEROLET
CAMARO
ALL TRIM LEVELS
2016-2018
COLORADO
ALL TRIM LEVELS
2015-2018
CORVETTE
ALL TRIM LEVELS
2014-2019
CRUZE
ALL TRIM LEVELS
2017-2018
EQUINOX
ALL TRIM LEVELS
2018
IMPALA
NON-CLASSIC
2014-2016
IMPALA
ALL TRIM LEVELS
2017-2019
MALIBU
NON-CLASSIC
2016
MALIBU
ALL TRIM LEVELS
2017-2018
SILVERADO
ALL TRIM LEVELS
2014-2018
SILVERADO
CLASSIC
2019
SILVERADO HD
ALL TRIM LEVELS
2015-2019
SUBURBAN
ALL TRIM LEVELS
2015-2019
TAHOE
ALL TRIM LEVELS
2015-2019
TRAVERSE
ALL TRIM LEVELS
2018-2019
VOLT
ALL TRIM LEVELS
2016-2018
GMC
ACADIA
ALL TRIM LEVELS
2018-2019
CANYON
ALL TRIM LEVELS
2015-2018
SIERRA
ALL TRIM LEVELS
2014-2018
SIERRA HD
ALL TRIM LEVELS
2015-2019
TERRAIN
ALL TRIM LEVELS
2018
YUKON
ALL TRIM LEVELS
2015-2019
YUKON XL
ALL TRIM LEVELS
2015-2019
Pac Audio AP4-GM61 ManualPac Audio AP3-GM61 Radio Locations
Add-On Amplifier OEM Integration Interface for Select 2002-2015 Amplified Lexus and Toyota Vehicles
Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.
AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time!
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Upgrade solution for factory, fixed level, data-bus controlled sound systems
Everything you need in one box to install your choice of aftermarket amplifier(s)
The time-saving design prevents the need for summing and audio correction devices.
Variable volume, fade, balance, bass, mid, and treble audio settings
Retains Bluetooth, navigation, safety system, and all warning chimes
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid, and treble center frequency selection
Plug-n-play installation with two 20-pin connectors (IE Bus)
Remote sub level controller included
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
Harness (IE Bus)
Bass knob
Knob harness
Manual
Applications
Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. See manual for details.
Toyota vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital.
Lexus vehicles must be equipped with a center channel and a subwoofer in order for the AP4-TY11 to be compatible:
Between 2012-2015 Toyota used two different styles of connectors. In order for the AP4-TY11 to be compatible, the radio must have the 20-pin BHA8113 style connector. Vehicles equipped with the 10 / 6-pin BHA1761 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference
LEXUS
CT 200H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2011-2013
ES 300
ALL TRIM LEVELS
For AmpPRO: With Double DIN Radio
2002-2003
ES 300H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2013-2014
ES 330
ALL TRIM LEVELS
For AmpPRO: With Double DIN Radio
2004-2006
ES 350
ALL TRIM LEVELS
—
2007-2009
ES 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2014
GX 460
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2009-2013
GX 470
ALL TRIM LEVELS
—
2004-2009
HS 250H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2012
IS 250
ALL TRIM LEVELS
—
2006-2009
IS 250
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2013
IS 350
ALL TRIM LEVELS
—
2006-2009
IS 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2013
IS F
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2012
LS 430
ALL TRIM LEVELS
—
2001-2006
RX 330
ALL TRIM LEVELS
—
2004-2006
RX 350
ALL TRIM LEVELS
—
2007-2009
RX 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2015
RX 400H
ALL TRIM LEVELS
—
2006-2008
RX 450H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2015
TOYOTA
4RUNNER
ALL TRIM LEVELS
—
2003-2013
AVALON
ALL TRIM LEVELS
—
2005-2012
AVALON
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2013-2014
CAMRY
ALL TRIM LEVELS
—
2007-2011
CAMRY
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2012-2014
COROLLA
ALL TRIM LEVELS
—
2005-2011
FJ CRUISER
ALL TRIM LEVELS
—
2011-2014
HIGHLANDER
ALL TRIM LEVELS
—
2008-2013
LAND CRUISER
ALL TRIM LEVELS
—
2008
PRIUS
ALL TRIM LEVELS
—
2004-2011
PRIUS
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2012-2015
RAV4
ALL TRIM LEVELS
—
2004-2013
RAV4
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2014
SEQUOIA
ALL TRIM LEVELS
—
2005-2012
SEQUOIA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style radio harness
2013
SEQUOIA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2014
SIENNA
ALL TRIM LEVELS
—
2004-2014
TACOMA
ALL TRIM LEVELS
—
2005-2013
TUNDRA
ALL TRIM LEVELS
—
2005-2013
VENZA
ALL TRIM LEVELS
—
2009-2012
VENZA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2013-2014
Pac Audio AP4-TY11 Manual
Add-On Amplifier OEM Integration Interface for Select 2012-2019 Amplified Lexus and Toyota Vehicles
Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.
AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time!
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Upgrade solution for factory, fixed level, data-bus controlled sound systems
Everything you need in one box to install your choice of aftermarket amplifier(s)
The time-saving design prevents the need for summing and audio correction devices.
Variable volume, fade, balance, bass, mid, and treble audio settings
Retains Bluetooth, navigation, safety system, and all warning chimes
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid, and treble center frequency selection
Plug-n-play installation with two 20-pin connectors (IE Bus)
Remote sub level controller included
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
Harness (IE Bus)
Bass knob
Knob harness
Manual
Applications
Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. See manual for details.
Vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital.
Lexus vehicles equipped with the Mark Levinson system are not compatible.
Lexus vehicles equipped with navigation are not compatible.
Lexus CT200h: Must be equipped with a center channel and a subwoofer
Between 2012-2015 Toyota used two different styles of connectors. In order for the AP4-TY12 to be compatible, the radio must have the 10 / 6-pin BHA1761 style connector. Vehicles equipped with the 20-pin BHA8113 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference.
LEXUS
CT 200H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2014-2017
ES 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
GX 460
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2014-2017
IS 200T
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
IS 250
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2014-2015
IS 300
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
NX 200T
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
NX 300H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
RC 200T
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
RC 300
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
RC 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
RX 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
TOYOTA
4RUNNER
ALL TRIM LEVELS
—
2014-2018
AVALON
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2013-2014
AVALON
ALL TRIM LEVELS
—
2015-2018
CAMRY
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2012-2014
CAMRY
ALL TRIM LEVELS
—
2015-2017
HIGHLANDER
ALL TRIM LEVELS
—
2014-2018
PRIUS
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2012-2015
PRIUS
ALL TRIM LEVELS
—
2016-2017
RAV4
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2014
RAV4
ALL TRIM LEVELS
—
2015-2018
SEQUOIA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness
2013
SEQUOIA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2014
SEQUOIA
ALL TRIM LEVELS
—
2015-2018
SIENNA
ALL TRIM LEVELS
—
2015-2017
TACOMA
ALL TRIM LEVELS
—
2014-2018
TUNDRA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness
2014-2015
TUNDRA
ALL TRIM LEVELS
—
2016-2019
VENZA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2013-2014
VENZA
ALL TRIM LEVELS
—
2015-2016
Pac Audio AP4-TY12 ManualPac Audio AP4-TY12 Technical Bulletin
Add-On Amplifier OEM Integration Interface for Select 2018-2021 Amplified Lexus and Toyota Vehicles
Quickly and seamlessly add aftermarket amplifier(s) for improved audio performance while retaining the factory radio. AmpPRO is a Plug-n-Play solution that plugs into the factory radio harness and provides Front/Rear/Sub RCA outputs (5 Volt RMS) to connect to your aftermarket amplifiers. The AmpPRO design avoids the disappointing results and hassle of interfacing after the factory amplifier.
The harness connects to the radio for easier installation.
Provides variable volume, fade, and balance
Provides bass, mid and treble audio settings
Retains warning chimes and navigation prompts
Retains Bluetooth and telematic audio (if equipped)
Front/Rear/Sub RCA outputs (5 Volt RMS)
Includes sub level controller
Optional TOSLINK optical output (APA-TOS1) sold separately.
Optional speaker connection harness (APH-TY02) sold separately.
Applications
Lexus ES250, ES350, and NX300: Only compatible in models equipped with the 8" screen
Lexus RX350 and RX450: Not compatible in models equipped with navigation
In 2018+ models Toyota used three different styles of connectors on the factory radios. In order for the AP4-TY13 to be compatible, the radio must have the 28 / 10-pin new Toyota style connector. Vehicles equipped with the 20-pin BHA8113 or the 10 / 6 pin BHA1761 style connectors are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference.
LEXUS
ES 250
ALL TRIM LEVELS
2019-2021
ES 350
ALL TRIM LEVELS
2019-2021
NX 300
ALL TRIM LEVELS
2019-2021
RX 350
ALL TRIM LEVELS
2019-2021
RX 450H
ALL TRIM LEVELS
2019-2020
TOYOTA
4RUNNER
ALL TRIM LEVELS
2019-2020
AVALON
ALL TRIM LEVELS
2019-2021
CAMRY
ALL TRIM LEVELS
2018-2021
COROLLA
ALL TRIM LEVELS
2019
HIGHLANDER
ALL TRIM LEVELS
2020-2021
RAV4
ALL TRIM LEVELS
2019-2020
SEQUOIA
ALL TRIM LEVELS
2019-2021
SIENNA
ALL TRIM LEVELS
2018-2020
TACOMA
ALL TRIM LEVELS
2019-2021
TUNDRA
ALL TRIM LEVELS
2020-2021
Pac Audio AP4-TY13 (R.2) Manual
