Mono

Automotive Amplifiers and Electronics with a Mono Audio Output

Automotive Amplifiers and Electronics with a Mono Audio Output

RMS power: This rating of any amplifier is the continuous power rating that an amp is designed to output at a maximum continued volume rating. The RMS power specification is one of two numbers to go by when pairing your speakers with an amplifier, not the only 2 but a good starting point. As an example, a speaker driver with a 1000-Watt, or 1000W for short, RMS rating should be paired with a one-thousand-watt RMS amplifier. We usually recommend an amp to be over powered by 10% RMS so that the power-plant does not have to work at 100% capacity to get 100-percent efficiency from your speakers. This will keep your amplifier from overheating during long periods of continuous operation.

Ohms: Is the resistance rating of an amp and is the second most important when pairing drivers with amplifiers. A power-plant that is 1000W @ 2-ohm might only put out 500-Watts @ 4Ω. When purchasing an amplifier, the correct pairing of a speaker’s RMS wattage and Ohm ratings with an amp’s output power rating is absolutely essential.

1 product

  • Skar Audio RP-350.1D : 350W Mono Automotive Amplifier, 350W/250W/150W Mono @ 1Ω/2Ω/4Ω Skar Audio RP-350.1D : 350W Mono Automotive Amplifier, input section.

    Skar Audio RP-350.1D : 350W Mono Automotive Amplifier, 350W/250W/150W Mono @ 1Ω/2Ω/4Ω

    Pre-Order Today!

    RP-Series Monoblock Subwoofer Amplifier 350-Watts @ 1-Ohm, 250-Watts @ 2-Ohm, 150W @ 4-Ohm Skar Audio engineered the RP-350.1D Class D monoblock subwoofer amplifier to be dominant in both power and reliability compared to anything else on the market in its class and physical size. Designing the most efficient, well built, high quality amplifiers is where we start here at Skar Audio, and that is exactly what is delivered in this unit. The smallest of all RP series amplifiers, the RP-350.1D is the perfect solution for when you need versatility but are not willing to sacrifice power output. The RP-350.1D is 1-ohm stable and utilizes a wide array premium internal components that make it extremely powerful and reliable - such as its high speed MOSFET power supply and advanced PCB board layout. Conservatively rated at 350 watts RMS power at a 1-ohm load, with the capabilities of reaching beyond 388 watts at max power output. This compact, small footprint amplifier, is by far one of the most affordable monoblocks Skar Audio has ever released, and is great for powering a pair of subwoofers rated around 200 watts RMS each or a single subwoofer around 400 watts RMS. In addition to all of the above features, the 4 gauge power and ground terminals found on the amplifier allow for maximum current flow and therefore higher power output and more efficient operation. Furthermore, you'll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ switch (0, +6, +12dB), and variable adjustment tunings for gain level, low-pass filter, and subsonic filter. Featuring 4-way protection circuitry, you'll have the peace of mind knowing that you are protected against damage to the amplifier for various reasons - including electrical shortage, over heating, low voltage, and more. This amplifier comes with a remote subwoofer level control (bass knob) allowing the user to have full control over their bass from the front of the vehicle. General Specifications Type Monoblock Car Amplifier Class D Bridgeable No Strappable No Fuse Rating 30 Amp MOSFET Type High Speed MOSFET Power Supply Damping Factor 150< Amplifier Width 6.20" Bass EQ (Boost) Yes (0‚+6 dB‚+12 dB) Output Channels 1 RCA Line Output No Turn-On Circuit Soft Turn-on Circuit Working Voltage 8.5V - 16V Amplifier Height 2.25" Amplifier Length 7.54" Subsonic Control Off - 50Hz Tri-Mode Capable No Frequency Response 20Hz - 250Hz RMS Power at 1 Ohm 350 Watts x 1 Channel (14.4v) Peak Power at 1 Ohm 375 Watts x 1 Channel (14.4v) RMS Power at 2 Ohms 250 Watts x 1 Channel (14.4v) RMS Power at 4 Ohms 150 Watts x 1 Channel (14.4v) Efficiency at 4 Ohms 0.9 Protection Built-in? Yes - 4-Way (Thermal‚Voltage‚Speaker‚DC) Power & Ground Inputs 4 Gauge Signal-to-Noise Ratio 85 dB Low Level Input (Gain) 6V - 0.2mV Low Pass Filter (Variable) 50Hz - 220Hz Power & Protection Indicators Yes - LED Indicators Remote Bass Knob & Cable Included Yes Real World Amplifier Dyno Test Results Dynamic (Peak) Power at 1 Ohm 452 Watts x 1 Channel (14.38v) Certified (RMS) Power at 1 Ohm 378 Watts x 1 Channel (14.36v) Skar Audio RP-Series Amplifier Installation Manual

    Pre-Order Today!

    $189.99

Login

Forgot your password?

Don't have an account yet?
Create account