Ford

Add-On Amplifier OEM Integration Line Converter with DSP for Select 2006-2014 Ford Vehicles Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP. Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do. Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall. Designed for amplified and non-amplified models Package includes the AXDSP-L and vehicle-specific T-harness 15-band graphic EQ or 5-band Parametric EQ Selectable high pass, low pass, or bandpass filters on each channel 4 inputs and 6 individually assignable outputs Independent equalization on each of the 6 outputs Selectable slope (12, 24, 36, or 48db per octave) Each channel can be delayed independently for up to 10 ms Easy behind the radio installation in most applications Can be used with OE and aftermarket radios Clipping detection and limiting circuits Internal header port for adding interface modules Bass knob included Retains OE voice prompts (Sync®) Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level Settings adjusted wirelessly in a smart device application (tablet or mobile phone) Read, write, and store configurations for future recall Password-protect feature is available in the mobile app Applications FORD Edge 2007-2010 Escape 2008-2012 Expedition Non-Sony 2007-2014 F-150 2006-2013 Flex 2009-2012 Focus 2008-2011 Fusion 2006-2012 Mustang 2006-2014 Taurus 2008-2011 Axxess AXDSPL-FD1 Manual

Read more less

Add-On Amplifier OEM Integration Line Converter with DSP for Select 2020-UP Ford Vehicles Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP. Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do. Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall. Designed for non-amplified models Package includes the AXDSP-L and vehicle-specific T-harness Selectable 15-band graphic EQ or 5-band Parametric EQ Selectable high pass, low pass, or bandpass filters on each channel 4 inputs and 6 individually assignable outputs Independent equalization for front, rear and sub Selectable crossover slope (12, 24, 36, or 48db per octave) Each channel can be delayed independently for up to 10ms Easy behind the radio installation with pre-wired harness Can be used with OE and aftermarket radios Clipping detection and limiting circuits Internal header port for adding interface modules Bass knob included for level control of subwoofer amp Settings adjusted via Bluetooth® in a smart device application (tablet or mobile phone) compatible with both Android and Apple devices Read, write, and store configurations for future recall Password-protect feature is available in the mobile app Applications FORD Bronco 2020-2023 Bronco Sport 2020-2023 E series 2021-2023 EcoSport 2020-2023 Escape 2020-2023 Expedition non-amplified 2018-2021 Explorer 2020-2023 F-150 2021-2022 Axxess AXDSPL-FD3 Manual

Read more less

Add-On Amplifier OEM Integration Line Converter with DSP and Factory-Amplifier Bypass-Harness for Select 2015-UP Amplified Ford Vehicles with Bang and Olufsen Sound Systems Upgrade your sound system with this cost-effective, easy-to-install DSPpackage that includes a vehicle-specific T-harness. Complete Tuning ControlInstallers will have full control to fine-tune each of the 10 channel outputs individually, controlled wirelessly via a free app available for smartphones and tablets. The app makes tuning easy with a 31-band graphic EQ and up to 10ms time delay for each channel, with independent high pass, low pass, and bandpass filters. Retain Features with a Built-in InterfaceUtilizing Axxess’s data interface technology, the AXDSP-X goes beyond what a traditional DSP can do and retains many of the features commonly lost when upgrading a sound system. Voice prompts, parking sensor chimes, and other factory chimes are retained with an adjustable volume control that many traditional DSPs cannot offer. This is a cost-effective solution for customers who want to retain their factory radio and improve their vehicle sound quality, while still retaining systems like SYNC or OnStar®. One Solution, Many ApplicationsThe AXDSP-X solution already works with a wide range of vehicle applications and systems, including OE or aftermarket radios, and fixed-level analog and/or digitally controlled amplified systems, in addition to non-amplified vehicles that do not have chimes. The AXDSP-X works with all the existing DSP T-harnesses and still offers the same easy installation behind the radio. Package includes the A2B interface, vehicle-specific T-harness, and amplifier bypass harness Designed for select vehicles with a B&O A2B amplifier Uses AXDSP-X technology 31-band graphic EQ or 5-band Parametric EQ Selectable high pass, low pass, or bandpass filters on each channel 6 inputs and 10 individually assignable outputs Independent equalization on each of the 6 outputs Selectable slope (12, 24, 36, or 48db per octave) Each channel can be delayed independently for up to 10ms Easy behind the radio installation in most applications Can be used with OE and aftermarket radios Clipping detection and limiting circuits Internal header port for adding interface modules Bass knob included Retains OE voice prompts (SYNC) with adjustable level Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level Chimes and voice prompts go through the aftermarket amplifier Factory amplifier does NOT need to be retained Settings adjusted wirelessly in a smart device application (tablet or mobile phone) Read, write, and store configurations for future recall Password-protect feature is available in the mobile app Micro “B” USB updatable 1-year limited warranty Applications FORD Bronco B&O system 2020-2023 Bronco Sport B&O system 2020-2023 EcoSport B&O system 2016-2019 EcoSport B&O system 2020-2023 Edge B&O system 2019-2023 Edge B&O system 2019-2023 Edge B&O system 2019-2023 Escape B&O system 2020-2023 Explorer B&O system 2020-2023 F-150 B&O system 2017-2020 F-150 B&O system 2018-2020 F-150 B&O system 2021-2022 F-250 B&O system 2020-2020 F-250 B&O system 2020-2020 Ranger B&O system 2019-2023 Axxess AXDSPX-A2B2 Manual

Read more less