Jeep

  Add-On ANC Integration Wiring-Harness for Select 2015-2019 Chrysler, Dodge, Jeep and RAM Vehicles Many late model Chrysler, Jeep, and RAM vehicles are equipped with an Active Noise Canceling (ANC) module. When adding aftermarket amplifiers in these vehicles, this factory ANC module must be bypassed for proper operation of the aftermarket audio equipment and avoid possible damage to the ANC module. The PAC ANC-CH01 provides a plug-and-play solution for bypassing the ANC module in these vehicles, eliminating the need to cut factory wiring. Quickly and easily bypass the ANC Module. Keeps ANC module on data-bus for vehicle diagnostics health Factory fit plug-in connectors Prevents cutting of factory wires Applications CHRYSLER Pacifica ALL TRIM LEVELS 2017-2019 DODGE RAM 1500, 2500, 3500 NON-CLASSIC 2019 JEEP Cherokee ALL TRIM LEVELS 2019 Grand Cherokee ALL TRIM LEVELS 2015-2016 RAM 1500, 2500, 3500 NON-CLASSIC 2019 Pac Audio ANC-CH01 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2007-2018 Amplified Chrysler, Dodge, Jeep and RAM Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features. Benefits Simplifies amplifier installation It prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it, thanks to the original amplifier's retention. Enables the addition of a subwoofer system to the original sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid and treble center frequency selection Retains uConnect, Bluetooth audio, and all warning chimes Plug & play installation Sublevel controller Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module 22-pin harness (MS-CAN) Bass knob Knob harness Manual Also available for fast, easy install: APH-CH01 harness (sold separately) Applications This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer. CHRYSLER Town & Country With factory amplifier 2008-2016 DODGE Challenger With factory amplifier 2008-2014 Charger With factory amplifier 2008-2010 Durango With factory amplifier 2011-2013 Durango With factory amplifier 2009 Grand Caravan With factory amplifier 2008-2018 RAM 1500, 2500, 3500 With factory amplifier 2009-2012 JEEP Grand Cherokee With factory amplifier 2008-2013 Wrangler JK, With factory amplifier 2018 Wrangler With factory amplifier 2007-2017 Wrangler Unlimited JK, With factory amplifier 2018 Wrangler Unlimited With factory amplifier 2007-2017 RAM 1500, 2500, 3500 With factory amplifier 2010-2012 Pac Audio AP4-CH21 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2013-2023 Chrysler, Dodge, Jeep, Maserati and RAM Vehicles This latest version of the Pac-Audio AmpPRO simplifies the installation of upgraded amplifiers in select non-amplified and amplified sound systems  With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features. Benefits Simplifies amplifier installation Prevents need for summing and DSP devices Provides factory sound system upgrade solution Provides flat audio output for a solid audio foundation Features Can be used to upgrade the entire sound system or just part of it thanks to retention of the original amplifier Enables the addition of a subwoofer to an amplified sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Customized OE bass, mid and treble center frequency selection Retains uConnect, Bluetooth audio, Navigation prompts, and all warning chimes Plug-n-Play installation Sub level controller Optional TOSLINK optical output (APA-TOS1 sold separately)  Includes AmpPRO module 52-pin harness (MS-CAN) Bass knob with harness Manual Also available for fast, easy install: APH-CH01 harness (sold separately) Select non-amplified vehicles are equipped with an ANC system that requires bypass.  Plug-n-Play bypass harness: ANC-CH01  Applications Compatible with both amplified and non-amplified factory systems. Jeep Cherokee, Chrysler 200, and Maserati: These vehicles must be equipped with a factory amplifier as the AP4 cannot reprogram the factory radio to think that an amplifier is present. When installing into any of the following vehicles, the APHCH42 is required (sold separately): CHRYSLER 200 With factory amplifier 2015-2017 300 2015-2023 Pacifica 7" screen, 8" screen 2017-2019 DODGE Challenger 7" screen, 8" screen 2015-2023 Charger 7" screen, 8" screen 2015-2023 Durango 7" screen, 8" screen 2014-2020 RAM 1500, 2500, 3500 7" screen, 8" screen 2013-2018 RAM 1500, 2500, 3500 All other sizes, Classic model 2019-2021 JEEP Cherokee With factory amplifier 2015-2021 Gladiator 2020-2023 Grand Cherokee 7" screen, 8" screen 2014-2020 Grand Cherokee 7" screen, 8" screen, WK 2021-2022 Wrangler JL 2018 Wrangler 2019-2023 Wrangler Unlimited JL 2018 Wrangler Unlimited 2019-2023 MASERATI Levante With factory amplifier 2018 Quattroporte With factory amplifier 2017 RAM 1500, 2500, 3500 7" screen, 8" screen 2013-2018 1500, 2500, 3500 All other sizes, Classic model, New model 2019-2021 Pac Audio AP4-CH41 R.2 ManualPac Audio AP4-CH41 ANC and Amplifier LocationsPac Audio AP4-CH41 R.2 Technical Bulletin

Read more less

Add-On Amplifier OEM Integration Interface for Select 2007-2024 Amplified Chrysler, Dodge, Fiat, Jeep, RAM and Volkswagen Vehicles Simplify speaker wire connections when adding aftermarket amplifiers with Pac-Audio's speaker connection harnesses. This adapter can easily add amplifiers with no need to cut or modify a vehicle’s original wiring. Features: Works with PAC AmpPRO: AP4-CH21, AP4-CH31, and AP4-CH41 Can use it for other installations requiring plug-n-play speaker wire connections Easily add amplifiers without cutting or modifying the vehicle’s original wiring. Provides a plug-n-play connection at the vehicle’s original amplifier location Saves time by quickly utilizing the original speaker wires Harness length 18 inches Applications CHRYSLER 200 With factory amplifier 2015-2017 300 With factory amplifier 2012-2023 Town & Country With factory amplifier 2008-2016 DODGE Challenger With factory amplifier 2015-2023 Charger With factory amplifier 2012-2023 Dart With factory amplifier 2013-2016 Durango With factory amplifier 2011-2023 Grand Caravan With factory amplifier 2008-2020 Journey With factory amplifier 2009-2020 Nitro With factory amplifier 2007-2011 RAM 1500, 2500, 3500 With factory amplifier 2010-2018 RAM 1500, 2500, 3500 Classic model, With factory amplifier 2019-2024 FIAT 500 With factory amplifier 2014-2019 JEEP Cherokee With factory amplifier 2015-2023 Grand Cherokee With factory amplifier 2014-2017 Liberty With factory amplifier 2008-2012 Wrangler JK, With factory amplifier 2018 Wrangler With factory amplifier 2008-2017 Wrangler Unlimited JK, With factory amplifier 2018 Wrangler Unlimited With factory amplifier 2008-2017 RAM 1500, 2500, 3500 With factory amplifier 2010-2018 1500, 2500, 3500 Classic model, With factory amplifier 2019-2024 VOLKSWAGEN Routan With factory amplifier 2010-2014 Pac Audio APH-CH01 Manual

Read more less

Add-On OE Amplifier-Integration Wiring-Harness for Select 2021-UP Amplified Chrysler, Dodge, and RAM Vehicles with uConnect5 Factory Audio Systems  Must be used with AP4-CH41 R.2 Plug and play solution for UConnect5 that allows you to use an AmpPRO with most Chrysler vehicles.  Benefits  Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Provides flat audio output for a solid audio foundation Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Customized OE bass, mid and treble center frequency selection Retains uConnect, Bluetooth audio, Navigation prompts, and all warning chimes Plug-n-Play installation Sublevel controller Optional TOSLINK optical output (APA-TOS1 sold separately) Also available for fast, easy install: APH-CH01 harness (sold separately) Select non-amplified vehicles are equipped with an ANC system that requires bypass.  Plug-n-Play bypass harness: ANC-CH01  Applications Must be used with AP4-CH41 R.2 Amplified Vehicles Compatible with all data-bus controlled amplified systems, no matter the screen size. To identify these systems, look for logos on door speakers, tweeters, dash speakers or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats or Harman Kardon. Some vehicles may not always have branded compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer. Non-Amplified Vehicles All other models: Only compatible in vehicles equipped with the 7” or bigger screen. Vehicles equipped with the 5” screen are not compatible. If you are installing the AmpPRO in a vehicle that is not equipped with a factory amplifier, you must add an amplifier to the vehicle's speakers, as the factory radio will no longer have a 4-channel variable output after it has been re-configured by the AmpPRO. For example, this will not work to add only a subwoofer to a non-amplified vehicle, as the radio will no longer power the cabin speakers properly. CHRYSLER Pacifica 7" screen, 8" screen, With factory amplifier 2021-2022 DODGE Durango 7" screen, 8" screen, With factory amplifier 2021 JEEP Gladiator 2024 Wrangler 2024-2025 Wrangler Unlimited 2024-2025 RAM 1500, 2500, 3500  7" screen, 8" screen, With factory amplifier 2022-2024 No Manual Available

Read more less

Ten-Inch-Size Heigh10 Head-Unit Replacement Dash Kit for Select 2011-2018 Amplified and Non-Amplified Wrangler Vehicles RadioPRO Jeep kit for Stinger’s HEIGH10 infotainment system. The kit enables you to replace a Jeep Wrangler JK factory radio with a show-stopping HEIGH10 multimedia display while retaining most factory features and adding even more upgraded features, including Apple CarPlay, Android Auto, and more to your Jeep's stereo system! *UN1810/HEIGH10 sold separately Dash kit and mounting included for a beautiful factory look with the HEIGH10 Stinger display (not included). Complete feature retention: warning chimes, steering-wheel-mounted radio controls, factory amplifier (if equipped) Vehicle-to-radio connectivity: vehicle speed, illumination, reverse, and parking brake signals Dual USB connection ports Complete plug-and-play system: no vehicle modifications needed! Flush-mounted plastics for a seamless OEM experience FLUSH-FITTED TO MINIMIZE VIBRATION & SHAKING The rugged mounting system was engineered to hold your HEIGH10 system securely to withstand any bumps, dips, and potholes that are on your trail.  KIT INCLUDES EVERYTHING NEEDED FOR THE INSTALLATION* INCLUDING:  Factory-Matched Radio Mounting Panels for HEIGH10  RP4-CH11 RadioPRO for Jeep Vehicles Complete Plug-N-Play Installation Harnesses Dash-Mount Dual USB Cable Antenna Adapters for Satellite and AM/FM Radio *HEIGH10 sold separately **Not compatible with Panoramic View Monitor (PVM) camera vehicles Due to continual development, features and specifications are subject to change. Applications - confirmed as of 2/10/2023 Year(s) Make Model Trim Level Additional Info 2011-2017 JEEP WRANGLER ALL TRIM LEVELS — 2018 JEEP WRANGLER JK — 2011-2017 JEEP WRANGLER UNLIMITED ALL TRIM LEVELS — 2018 JEEP WRANGLER UNLIMITED JK — Pac Audio SR-JK11H Installation Manual

Read more less

Ten-Inch-Size Heigh10 Head-Unit Replacement Dash Kit for Select 2018-UP Amplified and Non-Amplified Wrangler-JL and Gladiator-JT Vehicles RadioPRO Advanced fully integrated Jeep kit for Stinger’s HEIGH10 multimedia head unit. SRK-JW18EH enables you to replace a Jeep Wrangler or Gladiator factory radio with a show-stopping HEIGH10 while retaining factory features and adding even more upgraded features! *UN1810/HEIGH10 sold separately Dash kit and mounting hardware included for a beautiful factory look with either the HEIGH10* Stinger multimedia head unit Enables interactive on-screen climate controls, vehicle settings, & customizable vehicle performance apps Provides more control over your installation with RadioPRO Advanced controlled camera triggers, steering wheel controls, and factory amplifier control All factory cameras in full high-definition Dual-zone and Manual factory climate control (please check Compatibility Notes tab) Factory amplifier Factory USB ports Safety group chimes, including ParkSense® Steering wheel controls Auxiliary switch panel settings Heated seats / heated steering wheel On-screen vehicle settings menu KIT INCLUDES EVERYTHING NEEDED FOR THE INSTALLATION* INCLUDING:  Factory-matched mounting dash kits for HEIGH10 RadioPRO Advanced vehicle integration module PAC-Link adapter for Stinger multimedia units High-definition factory camera retention module Vehicle-specific plug-n-play wire harness Satellite antenna adapter AM/FM antenna adapter USB retention cables External chime speaker Applications - confirmed as of 2/10/2023 Year(s) Make Model Trim Level Additional Info 2020-2022 JEEP GLADIATOR ALL TRIM LEVELS — 2018-2022 JEEP WRANGLER JL — 2018-2022 JEEP WRANGLER UNLIMITED JL — Pac Audio SRK-JW18EH Installation Manual

Read more less