Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Add-on Aftermarket Backup-Camera Wiring-Harness for Select 2007-2017 Jeep Wrangler-JK Vehicles
The ALP-HRN-CAMCH is a Wrangler JK specific custom wiring harness and is just the correct length (4-foot RCA Input Cable) to reach down to the passenger side kick panel where the connection is made. It is a perfect match for the Jeep Wrangler specific Spare Tire Rear View Camera System (HCE-TCAM1-WRA). It also works with any Alpine rear view camera system that has a universal connection, like the HCE-C114, HCE-C125, or the HCE-C305R. After installation, the factory radio will require programming to activate the camera input. Programming to open the camera input required by your local Jeep dealership.
Alpine ALP-HRN-CAMCH Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Spare-Tire Rearview Camera-System for 2007-2023 Jeep-Wrangler, and other spare tire mount applications
The HCE-RCAM-WRA lets you easily add an Alpine rear-view camera to your 2007-2018 Jeep Wrangler JK. It is compatible with Alpine in-dash screen systems, the factory Jeep screen or other aftermarket screens. If used with the factory screen, you can add the Alpine SGS-CH01 Camera Interface (sold separately) with Active Guide Lines, – without factory screen re-programming.
With tons of wheel choices for the Wrangler, you need a versatile camera that works with any of them. The HCE-RCAM-WRA consists of the HCE-C1100 Rear-View Camera and bracket that is mounted between the spare tire and the Wrangler’s 5x5 wheel pattern. The upper portion of the bracket can be positioned to the left or right of the wheel’s spokes, ensuring that the attached camera has a clear line of sight behind the vehicle and is not blocked by the wheel.
Backing out of garages or riding through shady trails can be tough on a back-up camera. Standard cameras have difficulty managing changes in light, causing images to wash out and making it difficult to see what’s behind you at times. The HCE-RCAM-WRA has High Dynamic Range (HDR) technology for improved image quality. HDR technology can manage a wider range of luminance through the camera’s sensor as compared to standard cameras. Bright and dark areas are captured and adjusted for even exposure and white balance, preventing the image from being washed-out or too dark as you drive between sunlight and low-light conditions.
Specifications
Includes HCE-C1100 Rear Camera
Adjustable bracket positions the camera in-between the wheel spokes
Adjustable camera angle and height
Alpine HCE-RCAM-WRA Manual
Alpine Spare-Tire Rear-View Camera and Light-System for 2007-2023 Jeep-Wrangler, and other spare tire mount applications
It has a 7-inch diameter footprint and fits directly onto the spare tire mount, along with the tire itself. The result is a clean, integrated look that eliminates the need to drill holes to mount the camera into the bumper. The 6.25” W x 2” H LED third brake light provides added safety, while an additional reverse LED light illuminates the camera’s viewing angle for increased image visibility when your Wrangler is backing up. The optimized camera angle provides visibility for near and far objects behind your Jeep Wrangler; straight down and rear view (+5° up from horizontal which can be displayed on a factory or aftermarket in-dash screen (sold separately).The HCE-TCAM1-WRA is ready for your off-road adventures. The camera is waterproof and, dust-proof (at IP66 ratings), and the camera’s angle is optimized for viewing both near and far objects. The camera housing has a matte black finish with gun metal gray powder coat accents.
Specifications
Compatible with most Aftermarket and OEM wheels using spare tire mount
Works with Aftermarket or OEM in-dash display
P66 waterproof and dust-proof rugged camera system design
Built-in brake and reverse lights for increased visibility
Lug nut mounting for easy removal and wheel locking
Optimized camera angle for near and far objects
3 mounting posts included for wheel/tire depth
Alpine HCE-TCAM1-WRA Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Alpine 600-Watt Direct-Fit Weather-Resistant Powered Speaker-System with Built-in Subwoofer for 2011-2018 Jeep-Wrangler JK-Unlimited
A premium sound system for your Jeep Wrangler JK Unlimited is. The PSS-22WRA is a 1200-watt, 9-speaker sound system for 2011-2018 Jeep Wrangler JK Unlimited, providing excellent sound performance with the top on or off.
Caught with the top off in inclement weather? Not to worry. The PSS-22WRA is IP55 rated, so it can withstand rain and dust. The subwoofer uses rust resistant hardware and can handle water from off-roading adventures or a quick rinse down.
The PSS-22WRA’s subwoofer and amplifier don’t take up any usable space since they mount under the passenger’s seat for an easy bolt-in installation with simple wire routing. All necessary installation accessories are included.
The included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-22WRA is compatible with any Alpine Restyle Jeep Wrangler dash system, the Jeep factory base radio, or other aftermarket radio.
Specifications
Direct fit weather resistant (IP55) speaker package for non-amplified 2011– 2018 4-door Jeep® Wrangler JK Unlimited
600W RMS System
SPV-65X-WRA 6.5-inch Convertible Component/Coax water resistant speaker kit
SBV-10-WRA 10-inch under passenger seat water resistant enclosed subwoofer
KTA-30FW – 75W X 4ch Water Resistant Amplifier
KTA-30MW – 300W Water Resistant Mono Amplifier
Plug & play sound system
Compatible with an Alpine Restyle In-Dash system, aftermarket head unit, or with the factory Jeep radio
Includes remote bass knob, vehicle specific harnesses and mounting brackets
Alpine PSS-22WRA Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Alpine 300-Watt Powered Speaker-System Upgrade with Built-in Subwoofer for Select 2018-2022 Jeep-Wrangler and Gladiator-JT Vehicles
Enjoy premium sound quality even with your JL’s top off! The PSS-23WRA is a 300 watt powered system upgrade featuring a powered subwoofer, amplifier, and tweeters for the 2018-Up Jeep Wrangler-Unlimited-JL and Gladiator-JT vehicles without the factory amplified system. The PSS-23WRA provides excellent sound performance whether the JL’s top is on or off.
The PWE-S8 subwoofer is engineered to load and disperse lower frequency sound into the passenger’s foot well area to maximize bass extension throughout the Jeep for great sound with the top on or off. Included with the subwoofer is a remote bass knob so you can control the bass level from the convenience of your dashboard. The Included 4-channel amplifier more than doubles the power over the factory system allowing you to enjoy your tunes with the top off.
The PWE-S8 Powered Subwoofer and KTP-445U Power Pack Amplifier don’t take up much since they mount under the passenger’s seat. The two products come pre-connected for easy, bolt-in installation with simple wire routing. Mounting brackets for the products are included as well.
The SPR-10TW Component Tweeters replace the factory tweeters on the top of the dash. These high performance tweeters add much needed high frequency response that is lacking in the factory Jeep JL systems. An EQ Ring improves the tweeter’s dispersion characteristics and delivers a wide, flat frequency response.
The included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-23WRA is compatible with Alpine universal head units, the factory Jeep base radio, or other aftermarket radios.
Specifications
Direct fit for non-amplified 2018–Up 4-door Jeep Wrangler JL Unlimited
Direct fit for non-amplified 2019–Up 2-door Jeep Wrangler
Direct fit for non-amplified 2020–Up Jeep Gladiator JT
300 Watts RMS
Plug & Play Sound System
Compatible with aftermarket radio, or with factory Jeep Radio
Includes remote bass knob, vehicle specific harnesses and mounting bracket
Alpine PSS-23WRA Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
300-Watt Door-Speaker and Add-On Subwoofer Kit for Select 2018-UP Jeep Wrangler-JL and Gladiator-JT Vehicles
The PSS-24WRA is a 300-Watt Complete Sound System Upgrade Package for the four-door, non-amplified 2018–Up Jeep Wrangler-JL and non-amplified 2020–Up Jeep Gladiator-JT.
Go beyond your wildest expectations for sound with this complete sound upgrade package. The PSS-24WRA has 5-channels of powered sound that replaces your factory system. The package includes two sets of 6.5” weather-resistant mid-bas drivers and 1” weather-resist tweeters that replace the front and rear soundbar factory speakers, an 8” powered, compact subwoofer and a 4-channel power pack amplifier.
Specifications
Complete, five-channel powered sound system upgrade package
Compatible with four-door, non-amplified 2018 - Up Jeep® Wrangler and non-amplified 2020 – Up Jeep® Gladiator
Also compatible with two-door, non-scissor front seats in 2019 - Up Jeep® Wrangler
Includes Alpine’s SPV-65X-WRA, SPV-65-JLT, PWE-S8, and KTP-445U
180W, 4-channel Power Pack amplifier
120W, 8” powered subwoofer
(2x) 6.5” weather-resistant mid-bass drivers
(2x) 1” weather-resistant teteron dome tweeters with vehicle-specific connectors and crossovers
Vehicle specific front speaker pods with vehicle-specific connectors
Tweeter adapter plates allow for use of the original factory tweeter locations
SPV-65-JLT weather-resistant rear soundbar speaker system
Rugged, premium grills designed to emulate the factory look and appeal
Vehicle-specific connectors for plug-and-play speaker installation
Utilizes factory bolt locations
Durable stamped, steel frame speaker basket design
Includes template for mounting
Vehicle specific T-harness for installation with OEM radio into compatible 2018 – Up Jeep® Wrangler and 2020 – Up Jeep® Gladiator vehicles
Vehicle specific mounting brackets allow for the powered sub and amp to be secured under the passenger seat without drilling
What's in the Box:
KTP-445U Universal 4-Channel Power Amplifier
PWE-S8 8" Compact Powered Subwoofer
SPV-65X-WRA Front Component Speakers
SPV-65-JLT Rear Sound Bar Speakers
ALP-POD-JLT Front Speaker Pod
PSU-BKT-JL-R PWE Right Bracket JL
PSU-BKT-JL-L PWE Left Bracket JL
ALP-HRN-PSU300 PSU Power Harness
ALP-THRN-CH2 Chrysler T-Harness
CT6 6" Cable Ties
PHPSM412 Pan Head Phillips Screw M4x12
SLWM4 M4 Split Lock Washers
PHSCR832 8-32 Pan Head Phillips screws
PSS-WRA-IM Installation Manual
Specifications
Front (SPV-65X-WRA)
Power handling: 75 watts RMS (225 watts peak)
Frequency response: 65kHz – 22kHz
Nominal impedance: 4 ohms
Weather-resistant: IP55
Rear (SPV-65-JLT)
Power handling: 90 watts RMS (270 watts peak)
Frequency response: 50kHz – 22kHz
Nominal impedance: 4 ohms
Weather-resistant: IP55
Powered Subwoofer (PWE-S8)
120 watts RMS (240 watts peak)
Frequency response: 32 - 150Hz
Variable low-pass crossover (80-200 Hz)
Variable phase control (0-180 degrees)
preamp- and speaker-level inputs
Four Channel Power Pack Amplifier (KTP-445U)
45 watts RMS x 4 at 4 or 2 ohms
90 watts RMS x 2 bridged at 4 ohms
Selectable high-pass filters (60, 80, or 120 Hz at 12 dB/octave)
Switchable RCA or speaker-level inputs|
Dimensions:
27” L x 18.5” W x 19.5” H
40lbs
Direct fit for non-amplified 2018–Up 4-door Jeep Wrangler JL Unlimited
Direct fit for non-amplified 2019–Up 2-door Jeep Wrangler
Direct fit for non-amplified 2020–Up Jeep Gladiator JT
Alpine PSS-24WRA Installation Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Alpine 8-Inch 120-Watt Compact Powered Subwoofer-System for 2011-UP 4-Door Jeep-Wrangler Unlimited
The small, but powerful PWE-S8-WRA consists of an 8-inch powered subwoofer with a built-in 120 watt amp, a bracket designed to bolt the subwoofer under the Wrangler driver’s seat, a remote bass knob and Wrangler-specific wiring harnesses for plug-and-play connection to your aftermarket or factory in-dash system. The powered subwoofer measures just 13.5” L x 9” W x 3” D, so you can add low, punchy, accurate bass to your Jeep without taking up usable storage space.
Subwoofer controls like Phase, Gain, LP Crossover and Remote Sub Level are found on the side panel, or mount the remote bass knob on your dash and use it to easily make bass level adjustments.
Specifications
120 Watts bass upgrade for 2011-UP 4-door Jeep Wrangler*
Under driver seat plug & play system for improved bass/mid-bass performance
Works with an Alpine or aftermarket head unit, or with the factory Jeep radio
Includes powered 8" subwoofer, remote bass knob, harnesses and mounting brackets
Not compatible with the factory equipped subwoofer system
Alpine PWE-S8-WRA Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
R-Series Dual Loaded 750-Watt 8-Inch 2-Ohm Subwoofer Enclosure for Select Jeep Wrangler-JL Gladiator-JT and other Pickup Vehicles
From towing to travel, you depend on your truck to get you where you want to go, but can you rely on getting the best performance from your sound system? Now you can add deep, accurate bass in your truck without compromising valuable cabin space with the new R2-DB8V-TRK dual 8” Alpine Halo R-Series preloaded truck subwoofer enclosure with the ProLink system and amplifier space.
The enclosures were intentionally crafted to fit most full-size trucks. Two 8” subwoofers are preloaded into a compact enclosure for under the seat installation and linked with a ProLink bracket that can adjust from 51”-40”. Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine’s S-A75M Mono Power Amplifier (sold separately). Rubber “feet” are adjustable in height to accommodate uneven truck floors.
These ported subwoofer enclosures feature the next-generation 8” R-Series subwoofers with a more powerful motor that creates deeper bass while Alpine’s High Amplitude Multi-Roll (HAMR) surround technology allows the subwoofer cone to efficiently move air while staying cool for incredible accuracy. A new ceramic composite dust cap has higher heat resistance that ensures non-stop bass performance.
Alpine’s new preloaded truck subwoofer enclosures join the Alpine Halo family with a premium, unmistakable design. The enclosure pulls design cues from the Alpine Halo display with unique, curved edges outlined by a silver trim and a front link bracket cover with an Alpine logo badge. The 5/8” MDF enclosures are covered in a premium black carpet that will elevate the look of your truck.
With two preloaded R2-W8D2 8” R- Series subwoofers that are tuned to 36Hz, R2-DB8V-TRK is optimized to perform with Alpine’s R-Series sound system line. Dual voice coils are wired in parallel for a 2Ω load that’s compatible with Alpine’s R-Series R2-A75M mono power amplifier.
Features
Groundbreaking Alpine Halo Design
ProLink™ Ported Enclosure
Expandable Width from 40" to 51"
Compact, Under-the-Seat Installation in Most Full-Size Trucks
Integrated Amplifier Tray (not applicable with all vehicles)
Rubber, Modular Stackable Foot Design Accommodates Uneven Truck Floor Areas
Ported Enclosures with High-Performance S-Series Subwoofers
Front Link Alpine Branded Bracket
Side-Firing Cabin Loading Ports
Premium Alpine Wire Terminals
CARB Compliant 5/8" MDF Construction
Premium Black Carpet
Specifications
Dimensions: 40"-51" (Adjustable Width) x 8-3/4” (H) x 13-3/4” (D)
750W RMS
Frequency Response: 32Hz-200Hz
Sensitivity: 84dB
Dual voice coils Wired in Parallel for a 2Ω Load (Compatible with R-A75M)
Vented Enclosure Tuning Frequency: 36Hz
Custom spring-loaded speaker terminals fit up to 12AWG speaker wire
Alpine R2-DB8V-TRK BrochureAlpine R2-DB8V-TRK Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
S-Series Dual Loaded 600-Watt 8-Inch 2-Ohm Subwoofer Enclosure for Select Jeep Wrangler-JL Gladiator-JT and other Pickup Vehicles
From towing to travel, you depend on your truck to get you where you want to go, but can you rely on getting the best performance from your sound system? Now you can add deep, accurate bass in your truck without compromising valuable cabin space with the new S-DB8V-TRK dual 8” Alpine Halo S-Series preloaded truck subwoofer enclosure with the ProLink system and amplifier space.
The enclosures were intentionally crafted to fit most full-size trucks. Two 8” subwoofers are preloaded into a compact enclosure for under the seat installation and linked with a ProLink bracket that can adjust from 51”-40”. Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine’s S-A60M Mono Power Amplifier (sold separately). Rubber “feet” are adjustable in height to accommodate uneven truck floors.
The enclosures are designed for the unique cabin environment of your truck. The ported subwoofer enclosures feature Alpine’s reliable 8” S-Series subwoofers. The subwoofers are designed with an improved voice coil that brings out the full potential of the subwoofer. The custom-stamped steel frame is designed to withstand the rigors of the strong S-Series motor. Frame leg vents, as well as a vented backplate, keep the subwoofer cool for non-stop bass performance.
Alpine’s new preloaded truck subwoofer enclosures join the Alpine Halo family with a premium, unmistakable design. The enclosure pulls design cues from the Alpine Halo display with unique, curved edges outlined by a silver trim and a front link bracket cover with an Alpine logo badge. The 5/8” MDF enclosures are covered in a premium black carpet that will elevate the look of your truck.
With two preloaded S-W8D2 8” S- Series subwoofers that are tuned to 36Hz, the S-DB8V-TRK is optimized to perform with Alpine’s S-Series sound system line. Dual voice coils are wired in parallel for a 2Ω load that’s compatible with Alpine’s S-Series S-A60M mono power amplifier.
Features
Groundbreaking Alpine Halo Design
ProLink™ Ported Enclosure
Expandable Width from 40" to 51"
Compact, Under-the-Seat Installation in Most Full-Size Trucks
Integrated Amplifier Tray (not applicable with all vehicles)
Rubber, Modular Stackable Foot Design Accommodates Uneven Truck Floor Areas
Ported Enclosures with High-Performance S-Series Subwoofers
Front Link Alpine Branded Bracket
Side-Firing Cabin Loading Ports
Premium Alpine Wire Terminals
CARB Compliant 5/8" MDF Construction
Premium Black Carpet
Specifications
Dimensions: 40"-51" (Adjustable Width) x 8-3/4” (H) x 13-3/4” (D)
600W RMS
Frequency Response: 34Hz-200Hz
Sensitivity: 84dB
Dual voice coils Wired in Parallel for a 2Ω Load (Compatible with S-A60M)
Vented Enclosure Tuning Frequency: 36Hz
Custom spring-loaded speaker terminals fit up to 12AWG speaker wire
Alpine S-DB8V-TRK BrochureAlpine S-DB8V-TRK Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Alpine 75-Watt 2-Way Component Speaker-System for 2007-2018 Jeep Wrangler-JK
These 6.5-inch speakers in the SPV-65X-WRA are tuned specifically for the JK’s in-cabin environment and fit into the factory speaker locations for an easy update that will impress your ears.
The SPV-65X-WRA comes with adapters that allow the speakers to be installed as a component set by mounting the tweeters into the tombstones of older JKs or onto the dash for newer JKs. For older JKs that have a sound bar, the adapters convert the speakers into a coaxial design so they can be installed into the sound bar.
Driving with the top off is part of the fun of owning a Wrangler, but sometimes you get caught off-guard with the top down and inclement weather. The SPV-65X-WRA is weather resistant and rated IP55, so it’s protected from limited dust ingress and low-pressure water spray from any direction.
Specifications
6.5” Component or Coaxial 2-Way Speaker System w/ Convertible Design
Weather Resistant (IP55 rating)
Power Handling: 75W RMS/225W Peak
Nominal Impedance 4Ω
Frequency Response: 65-22kHz
1” Teteron Dome Tweeter
CustomSteel Frame w/ factory speaker mounting tabs
OEM speaker connectors
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Add-on Aftermarket Camera-to-Factory-Stereo Wiring Harness for Select 2013-UP Dodge, Jeep and RAM Vehicles with uConnect Radio
To be used when adding cameras to an OEM screen
(4) Camera inputs
Programmable 12V 5-amp switched output (configured through the Axxess Updater program)
Reverse signal trigger generated via CAN bus communication of the vehicle
Turn signal trigger generated via CAN bus communication of the vehicle
(4) Programmable camera control wires (configured through the Axxess Updater program)
Can also be manually controlled and used along with an aftermarket radio
VSS (Vehicle Speed Sense) input and output
Micro-B USB updatable
Retains backup camera
Applications
DODGE
Challenger
2015-2021
(w/ uConnect Radio)
Charger
2015-2021
(w/ uConnect Radio)
Durango
2014-2021
(w/ uConnect Radio)
JEEP
Cherokee
2014-2021
(w/ uConnect Radio)
Grand Cherokee
2014-2021
(w/ uConnect Radio)
RAM
1500 (DS)
2013-2019
(w/ uConnect Radio)
2500
2013-2018
(w/ uConnect Radio)
3500
2013-2018
(w/ uConnect Radio)
Axxess Interface AXAC-CH5 Manual
Amplifier Add-On OEM Line-Converter T-Harness for Select 2007-2017 Amplified and Non-Amplified Chrysler and Jeep Vehicles
For use with the Axxess AXDSP-L line converter.
Applications - confirmed as of 2/7/2023
JEEP
Grand Cherokee
2011-2013
Wrangler (JK)
2007-2017
RAM
1500
2010-2012
Axxess AXDSPH-CH4 ManualAxxess AXDSPL-CH4 Manual
Amplifier Add-On OEM Line-Converter T-Harness for Select 2014-UP Amplified and Non-Amplified Chrysler and Jeep Vehicles
For use with the Axxess AXDSP-L line converter.
Applications - confirmed as of 2/7/2023
CHRYSLER
200
2015-2017
300
2015-2022
Pacifica
2017-2020
DODGE
Challenger
2015-2022
Charger
2015-2022
Durango
2014-2020
Viper
2015-2017
JEEP
Cherokee
2014-2020
Compass
2017-2022
Grand Cherokee
2014-2022
Wrangler (JL)
2018-2022
RAM
1500
2013-2021
Axxess AXDSPH-CH5 ManualAxxess AXDSPL-CH5 Manual
Amplifier Add-On OEM Line-Converter T-Harness for Select 2020-UP Non-Amplified Chrysler, Dodge, Jeep and RAM Vehicles
For use with the Axxess AXDSP-L line converter.
Applications - confirmed as of 2/7/2023
CHRYSLER
Pacifica
2021-2022
DODGE
Durango
2021-2022
Voyager
2022
JEEP
Compass
2022
Grand Wagoneer
2022
RAM
1500
2022
2500/3500
2022
Promaster
2022
Axxess AXDSPH-CH8 ManualAxxess AXDSPL-CH8 Manual
Add-On Amplifier OEM Integration Interface for Select 2007-2021 Non-Amplified Chrysler, Dodge and Jeep Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-CH4 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications - confirmed as of 2/5/2023
Chrysler
200 2011-2014
300 2008-2010
Aspen 2008-2009
Sebring 2007-2010
Town & Country 2008-2017
Dodge
Avenger 2008-2014
Caliber 2009-2012
Caravan 2008-2020
Grand Caravan 2008-2020
Challenger 2008-2014
Charger 2008-2010
Dakota 2008-2011
Durango 2008-2013
Journey 2009-2010
Magnum 2008-2009
RAM 2009-2011
Jeep
Commander 2008-2010
Compass 2009-2017
Grand Cherokee 2008-2013
Liberty 2008-2012
Patriot 2009-2017
Wrangler(JK) 2007-2021
Axxess AXLOC-CH4 Manual
Add-On Amplifier OEM Integration Interface for Select 2007-2021 Non-Amplified Chrysler, Dodge, Fiat, Jeep and RAM Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
INTERFACE COMPONENTS
AXLOC-CH5 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications - confirmed as of 2/5/2023
Chrysler
200 2015-2017
Pacifica 2017-2020
Dodge
Dart 2011-2014
Durango 2011-2020
1500, 2500, 3500 2013-Up
Fiat
500 2016-2019
500L 2014-2020
500X 2016-2021
Jeep
Cherokee 2013-2021
Compass 2017-2021
Renegade 2015-2021
RAM
Chassis Cab 2500/3500/4500/5500 2013-2021
Promaster 1500/2500/3500 2014-2021
Promaster City 2015-2021
Axxess AXLOC-CH5 Manual
Non-Amplified Head-Unit Replacement Wiring-Harness Interface for Select 2014-2021 Jeep and RAM Vehicles
Provides accessory power (12-volt 10-amp)
Retains R.A.P. (retained accessory power)
Provides NAV outputs (parking brake, reverse, speed sense)
Pre-wired AXSWC harness (AXSWC sold separately)
Retains the factory backup camera
Designed for non-amplified models
Retains balance and fade
Retains the factory AUX-IN jack
Allows retention and adjustment of the Personalization Options (1)
Adjust Personalization Options through a Bluetooth application (1)
Smartphone application offering full control from either Android™ or Apple® mobile devices
AXVI-6524 interface
Micro-B USB updatable
(1) Actual options available vary per vehicle and per trim. (Refer to owner manual for options available in vehicle.)
Applications
JEEP
Renegade
Sport, Upland w/ Base radio
2018-2020
Renegade
All but Sport
2015-2017
Renegade
Sport
2015-2017
RAM
ProMaster
w/ 5-inch display (Uconnect 5.0)
2014-2021
ProMaster
w/ 3-inch display (Uconnect 3.0)
2016-2018
ProMaster City
2015-2020
Axxess Interface AXVI-6524 Manual
Head-Unit Replacement USB-Retention Adapter-Cable for Select 2006-UP Chrysler, GM and Ford Vehicles
Converts the factory USB port cable into standard full size male USB so it can be plugged into an aftermarket radio.
Click Here to View Vehicle Compatibility
Compatibility Confirmed through 2022
Aftermarket Head-Unit Replacement Audio/Video Retention Harness for Select 2008-2020 Chrysler Vehicles
Backup camera retention harness for select Chrysler Group vehicles 2008-2020. Provides A/V connections to the factory video screen and A/V input port, as well as camera output. VES system can only be retained in Grand Caravan, Town & Country, and Routan vehicles.
Click Here to View Vehicle Coverage - confirmed through 2020
Aftermarket Head-Unit Replacement Maestro-Module T-Harness for Select 2007-UP Chrysler, Dodge, Jeep, Mitsubishi and Volkswagen Vehicles
iDatalink Maestro RR and RR2 compatible radio replacement harness for select Mopar vehicles 2007 and up, and also Mitsubishi and Volkswagen. The radio side of the harness terminates in a universal connector that can be used in conjunction with available Maestro Head unit adapters for a plug n play solution or removed for conventional connections. For back-up camera and rear seat entertainment the AVCH1 is also required. Please see vehicle fit guide for more information on this solution.
Click Here to View Vehicle Compatibility - confirmed through 2020
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Aftermarket Head-Unit Replacement Maestro-Module T-Harness for Select 2007-UP Chrysler, Dodge and Jeep Vehicles
Greatly simplifies the installation of the Maestro RR module. For back-up camera and rear seat entertainment the AVCH1 is also required.
Click Here to View Vehicle Compatibility - confirmed through 2020
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
10-Inch 500-Watt Subwoofer Enclosure for Select 2011-2022 Jeep Grand-Cherokee with Black or Light-Frost Interior
The Grand Cherokee's pedigree for off-road prowess, comfort and everyday utility is well-represented by this generation of the venerable nameplate. We know that Jeep owners value the “go-anywhere, do-anything” capabilities of their vehicles. A bulky subwoofer enclosure that takes up valuable cargo space is not part of that experience, so JL Audio was pleased to present this beautiful Stealthbox® solution for the Jeep Grand Cherokee owner seeking great audio performance.
The Stealthbox® replaces the OEM “subwoofer” with a sealed enclosure housing a potent 10-inch JL Audio subwoofer driver. The enclosure installs in the passenger side rear corner of the cargo area without interfering with under-floor storage or cargo tie-down fixtures, while the included steel mesh grille keeps the driver safe from cargo-related mishaps.
The Hard Data: Contains one 10W3v3-2 subwoofer in a sealed enclosure. 500 watt power handling. Wired for 2 ohm mono. Black steel mesh woofer grille is included. Installs into passenger-side rear cargo panel and requires removal of factory “subwoofer”, if so equipped.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
JL Audio SB-J-GCHWK2/10W3v3 Installation Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
10-Inch 300-Watt Subwoofer Enclosure for Select 2007-2017 Jeep-Wrangler 2-Door with Black-Interior
The original American off-road machine is made for getting dirty and finding places that nothing else with four wheels and four seats can reach, but it's not really made for great bass. Let's see what we can do about that.
This low-profile Stealthbox® system sits inconspicuously on the cargo-area floor and features a rigid, carpet-covered, removable panel that conceals a powerful 10-inch subwoofer driver and a secure mounting place for a JL Audio amplifier (sold separately). The subwoofer driver is housed in a sealed, carpet-covered fiberglass enclosure. The entire structure is designed to be easily installed and removed when the tailgate is opened, so you can choose to remove it if you plan to get your Jeep really filthy or need the extra space.
The Hard Data: Contains one 10W1v3-2 subwoofer in a sealed enclosure. 300 watt power handling. Wired for 2 ohm mono. Installs on floor of the rear cargo area. Floor of cargo area is raised approximately 5 inches with installation. Will not affect rear seat-folding functionality. Cannot be used without the factory tailgate in place.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
JL Audio SB-J-JK2DR/10W1v3 Installation Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
10-Inch 300-Watt Subwoofer Enclosure for Select 2018-2022 Jeep Wrangler-Unlimited, Driver Side
Combining JL's advanced thin-line subwoofer technology with a form fitting enclosure design, these Stealthbox® systems deliver outstanding sub-bass performance in your 4-door Wrangler, without consuming excess cargo space.
Constructed from 100% fiberglass, each Stealthbox® houses a 10TW1 thin-line subwoofer and mounts solidly above each rear wheel well. A matching trim panel and sturdy steel-mesh grille are included, so you can carry plenty of gear without worrying about damage. Separate driver and passenger side Stealthbox® models are available, each with 2 or 4 ohm drivers.
The Hard Data: Contains one 10TW1 in a sealed enclosure with 300 watt power handling. Choose from 2 ohm or 4 ohm models, driver or passenger side. Each enclosure installs above one rear wheel well. Black steel mesh grille is included with each.
If vehicle is factory-equipped with Premium Audio, passenger side Stealthbox® installation requires removal of OEM “subwoofer” and purchase of interior trim parts from Jeep®.
Will not fit any "JK" Jeep® model or 2-Door "JL" models.
Soft-top models: Stealthbox® installation does not interfere with normal top operation, except for the final position where the top mechanism is detached from the rails.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
JL Audio SB-J-JL4DDRV/10TW1-2 Installation Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
10-Inch 300-Watt Thin Subwoofer-Enclosure for Select 2018-2022 Jeep Wrangler-Unlimited, Passenger-Side
Combining JL's advanced thin-line subwoofer technology with a form fitting enclosure design, these Stealthbox® systems deliver outstanding sub-bass performance in your 4-door Wrangler, without consuming excess cargo space.
Constructed from 100% fiberglass, each Stealthbox® houses a 10TW1 thin-line subwoofer and mounts solidly above each rear wheel well. A matching trim panel and sturdy steel-mesh grille are included, so you can carry plenty of gear without worrying about damage. Separate driver and passenger side Stealthbox® models are available, each with 2 or 4 ohm drivers.
The Hard Data: Contains one 10TW1 in a sealed enclosure with 300 watt power handling. Choose from 2 ohm or 4 ohm models, driver or passenger side. Each enclosure installs above one rear wheel well. Black steel mesh grille is included with each.
If vehicle is factory-equipped with Premium Audio, passenger side Stealthbox® installation requires removal of OEM “subwoofer” and purchase of interior trim parts from Jeep®.
Will not fit any "JK" Jeep® model or 2-Door "JL" models.
Soft-top models: Stealthbox® installation does not interfere with normal top operation, except for the final position where the top mechanism is detached from the rails.
Jeep Part #CFWLR-74-24 carpet needs to be ordered from jeep to remove the Factor Subwoofer.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
JL Audio SB-J-JL4DPAS/10TW1-2 Installation Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Dual 10-Inch 600-Watt Thin Subwoofer-Enclosure for Select 2020-2022 Jeep Gladiator-JL Vehicles
More than just a Jeep pickup, the Gladiator is an accomplished off-road vehicle with dramatic styling and advanced technology features. JL Audio's Stealthbox® enhances all this by adding impressive, high-quality bass without losing any of your precious people space or interior functionality.
Featuring an all-fiberglass, sealed enclosure design, this Stealthbox® houses two of JL's innovative 10TW1 thin-line subwoofers and mounts neatly under the rear seat, without compromising rear passenger comfort. Rear seat folding is unaffected, and they even left space on the enclosure that’s perfect for a clean, hidden amplifier installation!
The Hard Data: Contains two 10TW1-4 Subwoofers in a sealed enclosure. 600 watt power handling. Wired for 2 ohm mono. Installation requires removal of under seat storage compartment, if equipped. Retains hardtop hardware storage box and jack stowage.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
JL Audio SB-J-JTGLAD/10TW1 Installation Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Single 13-Inch 600-Watt Thin Subwoofer-Enclosure for Select 2007-2012 Jeep-Wrangler JK-Unlimited with Black-Trunk
Jeep® certainly hit a grand-slam when it added a second set of doors to the Wrangler® platform, but the factory audio system can definitely use some help.
JL Audio's Stealthbox® for the Wrangler Unlimited® is designed to provide powerful, audiophile bass quality without significantly compromising your precious cargo space. JL's patented, low-profile TW5 subwoofer technology makes it possible to extract amazing bass from a very thin enclosure that bolts solidly to the passenger-side rear wheel well. Rugged, 100% fiberglass construction is as tough as your Jeep® and the protected driver position means that you can still toss all your gear in the back without worrying about damage. It also won't call attention to itself in parking lots... even if you have a ragtop.
So, whether your adventures are urban, suburban or on the roughest trails... this Stealthbox® will make them all more exciting.
The Hard Data: Contains one 13TW5v2-2 subwoofer in a sealed enclosure. 600 watt power handling. Wired for 2 ohm mono. Installs against passenger-side wheel well. Requires removal of factory “subwoofer", if so equipped. For model years 2011-Up with a 12V accessory plug on the rear passenger side cargo panel/subwoofer, you must purchase a plain (without subwooofer) passenger side rear cargo trim panel (part #1pu12dx9ag) and a cover for the upper seat belt / roll bar (part #1pu18dx9ad) from Jeep/Mopar parts. Use of the accessory outlet is lost with Stealthbox® installation.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
JL Audio SB-J-UNLTD4D/13TW5v2 Installation Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Single 10-Inch 300-Watt Thin Subwoofer-Enclosure for Select 2007-2017 Jeep-Wrangler JK-Unlimited with Black-Trunk, Driver Side
Whether your adventures are urban, suburban or on the roughest trails... these Stealthbox® systems for the 4-door Wrangler Unlimited will make them all more exciting.
These systems are designed to provide powerful, audiophile bass quality without significantly compromising precious cargo space. JL Audios patented, low-profile thinline subwoofer technology extracts amazing bass from very thin enclosures that bolt solidly above each rear wheel well. Rugged, 100% fiberglass construction is as tough as your Jeep® and sturdy steel-mesh grilles mean you can still toss all your gear in the back without worrying about damage.
Because Jeep® owners customize their vehicles in all kinds of creative ways, the driver side and passenger side Stealthbox® systems are sold individually. A single one is enough for most people to be very happy, but you can go for two if maximum performance is your goal.
The Hard Data: Each system contains one 10TW1 in a sealed enclosure with 300 watt power handling. Each enclosure is wired for 2 or 4 ohms. A steel mesh grille is included with each to protect the subwoofer driver. Each enclosure installs above one rear wheel well, with specific models for passenger and driver side. Does not affect hard top installation.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
JL Audio SB-J-WRUD/10TW1-2 Installation Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Single 10-Inch 300-Watt Thin Subwoofer-Enclosure for Select 2007-2017 Jeep-Wrangler Unlimited, Passenger Side
Whether your adventures are urban, suburban or on the roughest trails... these Stealthbox® systems for the 4-door Wrangler Unlimited will make them all more exciting.
These systems are designed to provide powerful, audiophile bass quality without significantly compromising precious cargo space. JL's patented, low-profile thin line subwoofer technology extracts amazing bass from very thin enclosures that bolt solidly above each rear wheel well. Rugged, 100% fiberglass construction is as tough as your Jeep® and sturdy steel-mesh grilles mean you can still toss all your gear in the back without worrying about damage.
Because Jeep® owners customize their vehicles in all kinds of creative ways, the driver side and passenger side Stealthbox® systems are sold individually. A single one is enough for most people to be very happy, but you can go for two if maximum performance is your goal.
The Hard Data: Each system contains one 10TW1 in a sealed enclosure with 300 watt power handling. Each enclosure is wired for 2 or 4-ohms. A steel mesh grille is included with each to protect the Subwoofer. Each enclosure installs above one rear wheel well, with specific models for passenger and driver side. Does not affect hard top installation.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
JL Audio SB-J-WRUP/10TW1-2 Installation Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Fuse-Holder Mounting Bracket for Under-The-Hood Locations in Select 2007-2017 Jeep Wrangler-JK Vehicles
The SBA-J-JK-FHB Fuse Holder Bracket easily and securely mounts up to two JL Audio XB-MFBU-ANL Master Fuse Blocks (sold separately). Attaches to the firewall of your 2-door or 4-door Wrangler using factory hardware (no drilling required). Powder-coated steel, engineered and built in USA.
JL Audio SBA-J-JK-FHB Installation Manual
Pre-Order Today! - we will notify you when to pick-up or to schedule an installation!
Amplifier Mounting Bracket for Under-The-Seat Locations in Select 2007-2017 Jeep Wrangler-JK Vehicles
The SBA-J-JKU-UAR Universal Amplifier Rack fits under either front seat of your 4-door Wrangler to securely mount one of several different JL Audio amplifier models (sold separately). Installs using factory hardware and requires no drilled holes. Powder-coated steel, engineered and built in USA.
Will not fit 2-Door models.
Includes predrilled mounting locations and hardware to install one of the following amplifier models:
VXi: All models.XDv2: All models, except XD800/8v2, XD1000/1v2 and XD1000/5v2.*M-Series: All models, except M800/8v2, M1000/1v2 and M1000/5v2.RD: All models, except RD1000/1, RD1500/1 and RD900/5.MX: All models; up to two of MX280/4 and MX300/1.*** includes XD versions** includes HX and MHX versions
JL Audio SBA-J-JKU-UAR Installation Manual
Fuse-Holder Mounting Bracket for Under-The-Hood Locations in Select 2018-2022 Jeep Wrangler-JL and Gladiator-JL Vehicles
The SBA-J-JL-FHB Fuse Holder Bracket is designed to securely mount up to two JL Audio XB-MFBU-ANL Master ANL Fuse Blocks (sold separately). Engineered and Built in USA, the SBA-J-JL-FHB Fuse Holder Bracket requires no drilled holes and installs using factory hardware.
The Hard Data: Attaches to the vehicle's firewall using factory hardware. Fits 2-Door or 4-Door models. Will not fit Rubicon 392 or models equipped with the EcoDiesel engine.
Will not fit any 2018 "JK" Jeep® models.
JL Audio SBA-J-JL-FHB Installation Manual
Amplifier Mounting Bracket for Under-The-Seat Locations in Select 2018-2022 Jeep Wrangler-JL and Gladiator-JL Vehicles
The SBA-J-JLU-UAR Universal Amplifier Rack fits under either front seat to securely mount one of several different JL Audio amplifier models (sold separately). Featuring an angled design to maximize rear seat foot space, the SBA-J-JLU-UAR Amplifier Rack requires no drilled holes and installs using factory hardware. Engineered and Built in USA.
Includes predrilled mounting locations and hardware to install one of the following amplifier models:
VXi: All models.XDv2: All models, except XD800/8v2, XD1000/1v2 and XD1000/5v2.*M-Series: All models, except M800/8v2, M1000/1v2 and M1000/5v2.RD: All models, except RD1000/1, RD1500/1 and RD900/5.MX: All models; up to two of MX280/4 and MX300/1.*** includes XD versions** includes HX and MHX versions
JL Audio SBA-J-JLU-UAR Manual
Stereo-Replacement Antenna-Adapter for Select 2002-UP Buick, Cadillac, Chevy, Chrysler, Dodge, Ford, GMC, Hummer, Jeep, Lincoln, Mazda, Mercury, Mitsubishi, Pontiac and Saturn Vehicles
If you are adding an external device with a built-in FM modulator in your vehicle, these antenna cable adapters ensure that you can continue to use your factory radio and antenna. These are simple yet necessary cables that adapt the vehicle’s original factory radio and antenna connectors to plug into the FM modulator.
Antenna adapter kit
Used to adapt the vehicle’s original factory radio and antenna connectors to use with an FM modulator
Cable #1 has a male Motorola™ connector on one end and female snap-lock antenna connector on the other end
Cable #2 has a female Motorola™ connector on one end and female snap-lock antenna connector on the other end
Applications
BUICK
Enclave
2008-2017
Lucerne
2006-2011
CADILLAC
DTS
2006-2011
Escalade
2007-2014
Escalade ESV
2007-2014
Escalade EXT
2007-2014
SRX
2007-2009
CHEVY
Avalanche
2007-2013
Aveo
2007-2011
Aveo 5
2009-2011
Captiva Sport
2012-2015
Cobalt
2007-2010
Equinox
2007-2009
Express
2008-2021
HHR
2006-2011
Impala
2006-2013
Impala Limited
2014-2016
Malibu
2008-2012
Monte Carlo
2006-2007
Silverado 2500 HD, 3500 HD, Chassis Cab
2014
Silverado
2007-2013
Suburban
2007-2014
Tahoe
2007-2014
Traverse
2009-2017
CHRYSLER
300
2005-2007
300C
2005-2007
300M
2002-2004
Aspen
2007
Concorde
2002-2004
Pacifica
2004-2008
PT Cruiser
2002-2010
Sebring
2002-2006
Sebring Sedan
2002-2005
Town & Country
2002-2007
Voyager
2002-2003
DODGE
Caliber
2007-2008
Caravan
2002-2007
Grand Caravan
2002-2007
Charger
2006-2007
Dakota
2002-2007
Durango
2002-2007
Intrepid
2002-2004
Magnum
2005-2007
Neon
2002-2005
Ram 1500
2002-2008
Ram 2500, 3500
2003-2009
Ram 4500, 5500
2008-2010
Stratus
2002-2006
Viper
2003-2010
FORD
E-Series
2014-2019
Econoline
2009-2013
Edge
2007-2010
Escape
2008-2012
Expedition
2007-2015
Expedition (SSV)
2015
Explorer
2006-2010
Explorer Sport Trac
2006-2010
F-150
2007-2014
F-250/350/450/550
2008-2016
F-650, F-750
2011-2019
Flex
2009-2012
Focus
2008-2011
Fusion
2006-2012
Fusion Hybrid
2013-2020
Mustang
2007-2014
Taurus
2008-2009
Taurus X
2008-2009
Transit Connect
2010-2013
GMC
Acadia
2007-2016
Acadia Limited
2017
Savana
2008-2020
Sierra 2500 HD, 3500 HD, Chassis Cab
2014
Sierra
2007-2013
Yukon
2007-2014
Yukon XL
2007-2014
HUMMER
H2
2008-2009
JEEP
Commander
2006-2007
Compass
2007-2008
Grand Cherokee
2002-2007
Liberty
2002-2007
Patriot
2007-2008
Wrangler
2003-2006
LINCOLN
MKS
2009-2012
MKT
2010-2012
MKX
2007-2010
MKZ
2007-2012
Navigator
2007-2014
Zephyr
2006
MAZDA
Tribute
2008-2011
MERCURY
Mariner Hybrid
2008-2011
Mariner
2008-2011
Milan
2010-2011
Milan
2006-2008
Mountaineer
2006-2010
Sable
2008-2009
MITSUBISHI
Raider
2006-2007
PONTIAC
G3 (sedan)
2007-2009
G5
2005-2010
G6
2009-2010
Solstice
2006-2009
Torrent
2007-2009
Vibe
2009-2010
SATURN
Aura
2007-2009
ION
2006-2007
Outlook
2007-2010
Sky
2007-2009
VUE
2006-2010
Non-Amplified Head-Unit Replacement Wiring-Harness Adapter for Select 1984-2006 Chrysler, Plymouth, Dodge and Jeep Vehicles
Wiring harness for fast and easy radio installation
Plugs into the car’s original radio connectors on one side
Color-coded wires on the other side are connected to the aftermarket radio
No wire cutting needed for factory radio connectors
Provides electrical power to the radio for a four-speaker connection
Applications
CHRYSLER
300M
1999-2001
Cirrus
1995-2000
Concorde
1993-2001
E-Class
1984
Fifth Avenue
1984-1993
Imperial
1990-1993
LHS
1995-2001
Laser
1984-1989
LeBaron, LeBaron GTS
1984-1995
New Yorker
1984-1996
PT Cruiser
2001
Sebring
1995-2006
Town & Country
1990-2001
Voyager
2000-2001
Grand Voyager
2000
DODGE
Aries
1984-1989
Avenger
1995-2000
Caravan
1984-2001
Charger
1984-1987
Dakota
1987-2001
Daytona
1984-1993
Diplomat
1984-1989
Durango
1998-2001
Dynasty
1988-1993
Grand Caravan
2001
Intrepid
1993-2001
Lancer
1986-1989
Neon
1995-2001
Omni
1984-1990
Ram Pickup 1500
1994-2001
Ram Pickup 2500, 3500
1994-2002
Ram Pickup 150, 250, 350
1984-1993
Ram Charger
1984-1993
Ram Van
1984-2003
Shadow
1987-1994
Spirit
1989-1995
Stratus Coupe
2002-2006
Stratus
1995-2001
EAGLE
Vision
1993-1997
JEEP
Cherokee
1997-2001
Grand Cherokee
1993-2001
Wrangler
1997-2002
PLYMOUTH
600E Class
1984-1987
Acclaim
1989-1995
Breeze
1996-1999
Caravelle
1985-1988
Gran Fury
1984-1989
Horizon
1984-1990
Neon
1995-2001
Prowler
1997-2002
Sundance
1987-1994
Turismo
1984-1987
Voyager
1984-2000
