Factory OEM Amplifier Bypass Wiring Harness for Select 2015-2019 Fiat and Jeep Vehicles
Allow the factory amplifier to be bypassed without altering the factory wiring.
20 gauge wires
Length – 12 inches
Applications
FIAT
500X
2015-2017
JEEP
Renegade
2015-2019
Axxess AXABH-CH3 Brochure
Add-On Amplifier OEM Integration Line Converter with DSP for Select 2007-2020 Chrysler, Dodge, Jeep and RAM Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for amplified and non-amplified models
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains OE voice prompts (Uconnect®)
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Applications
CHRYSLER
Town & Country
2008-2020
DODGE
Caravan/Grand Caravan
2008-2020
Dart
2013-2016
Nitro
2007-2011
JEEP
Grand Cherokee
2011-2013
Liberty
2008-2012
Wrangler (JK)
2007-2017
RAM
1500
2010-2012
Axxess AXDSPL-CH4 Manual
Add-On Amplifier OEM Integration Line Converter with DSP for Select 2013-UP Chrysler, Dodge, Fiat, Jeep and RAM Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for amplified and non-amplified models
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains OE voice prompts (Uconnect®)
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Applications
CHRYSLER
200
2015-2017
300
2015-2023
Pacifica
2017-2020
Pacifica
without separate screen
2021-2022
DODGE
Challenger
2015-2023
Charger
2015-2023
Durango
2014-2020
Durango
without separate screen
2021-2022
Viper
2015-2017
FIAT
500X
2015-2017
JEEP
Cherokee
2014-2020
Compass
2017-2021
Gladiator
2020-2023
Grand Cherokee
2014-2022
Renegade
2015-2019
Wrangler (JL)
2018-2023
RAM
1500/2500/3500
2013-2018
1500/2500/3500
2019-2021
Axxess AXDSPL-CH5 Manual
Amplified or Non-Amplified Head-Unit Replacement Wiring Harness Adapter for Select 2002-2010 Chrysler, Dodge and Jeep Vehicles
Wiring harness for fast and easy radio installation
Plugs into the car’s original radio connectors on one side
Color-coded wires on the other side are connected to the aftermarket radio
No wire cutting needed for factory radio connectors
Provides electrical power to the radio for a four-speaker connection
Non-Amplified Applications
CHRYSLER
300M
2002-2004
Concorde
2002-2004
Pacifica
2004-2008
PT Cruiser
2002-2005
Sebring
2002-2006
Sebring Sedan
2002-2005
Town & Country
2002-2007
Voyager
2002-2003
DODGE
Caravan
2002-2007
Grand Caravan
2002-2007
Dakota
2002-2004
Durango
2002-2003
Intrepid
2002-2004
Neon
2002-2005
Ram Pickup 1500
2002-2005
Ram Pickup 2500, 3500
2003-2005
Stratus Sedan
2002-2006
Viper
2002-2010
JEEP
Grand Cherokee
2002-2004
Liberty
2002-2007
Wrangler
2003-2006
Amplified Applications
DODGE
Viper
2003-2007
Add-On ANC Integration Wiring-Harness for Select 2015-2019 Chrysler, Dodge, Jeep and RAM Vehicles
Many late model Chrysler, Jeep, and RAM vehicles are equipped with an Active Noise Canceling (ANC) module. When adding aftermarket amplifiers in these vehicles, this factory ANC module must be bypassed for proper operation of the aftermarket audio equipment and avoid possible damage to the ANC module. The PAC ANC-CH01 provides a plug-and-play solution for bypassing the ANC module in these vehicles, eliminating the need to cut factory wiring.
Quickly and easily bypass the ANC Module.
Keeps ANC module on data-bus for vehicle diagnostics health
Factory fit plug-in connectors
Prevents cutting of factory wires
Applications - confirmed as of 2/1/2023
Year(s)
Make
Model
Trim Level
Additional Info
2017-2019
CHRYSLER
PACIFICA
ALL TRIM LEVELS
—
2019
DODGE
RAM TRUCK
NON-CLASSIC
—
2019
JEEP
CHEROKEE
ALL TRIM LEVELS
—
2015-2016
JEEP
GRAND CHEROKEE
ALL TRIM LEVELS
—
2019
RAM
RAM TRUCK
NON-CLASSIC
—
Pac Audio ANC-CH01 Manual
Add-On Amplifier OEM Integration Interface for Select 2007-2018 Amplified Chrysler, Dodge, Jeep and RAM Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features.
Benefits
Simplifies amplifier installation
It prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it, thanks to the original amplifier's retention.
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, and all warning chimes
Plug & play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
22-pin harness (MS-CAN)
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-CH01 harness (sold separately)
Applications
This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer.
CHRYSLER
TOWN & COUNTRY
ALL TRIM LEVELS
2008-2016
DODGE
CHALLENGER
ALL TRIM LEVELS
2008-2014
CHARGER
ALL TRIM LEVELS
2008-2010
DURANGO
ALL TRIM LEVELS
2009, 2011-2013
GRAND CARAVAN
ALL TRIM LEVELS
2008-2018
RAM TRUCK
ALL TRIM LEVELS
2009-2012
JEEP
GRAND CHEROKEE
ALL TRIM LEVELS
2008-2013
WRANGLER
ALL TRIM LEVELS
2007-2017
WRANGLER
JK
2018
WRANGLER UNLIMITED
ALL TRIM LEVELS
2007-2017
WRANGLER UNLIMITED
JK
2018
RAM
RAM TRUCK
ALL TRIM LEVELS
2010-2012
Pac Audio AP4-CH21 Manual
Add-On Amplifier OEM Integration Interface for Select 2013-UP Chrysler, Dodge, Jeep, Maserati and RAM Vehicles
This latest version of the Pac-Audio AmpPRO simplifies the installation of upgraded amplifiers in select non-amplified and amplified sound systems With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features.
Benefits
Simplifies amplifier installation
Prevents need for summing and DSP devices
Provides factory sound system upgrade solution
Provides flat audio output for a solid audio foundation
Features
Can be used to upgrade the entire sound system or just part of it thanks to retention of the original amplifier
Enables the addition of a subwoofer to an amplified sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, Navigation prompts, and all warning chimes
Plug-n-Play installation
Sub level controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
52-pin harness (MS-CAN)
Bass knob with harness
Manual
Also available for fast, easy install: APH-CH01 harness (sold separately)
Select non-amplified vehicles are equipped with an ANC system that requires bypass. Plug-n-Play bypass harness: ANC-CH01
Applications
Compatible with both amplified and non-amplified factory systems.
Jeep Cherokee, Chrysler 200, and Maserati: These vehicles must be equipped with a factory amplifier as the AP4 cannot reprogram the factory radio to think that an amplifier is present.
When installing into any of the following vehicles, the APHCH42 is required (sold separately):
CHRYSLER
200
ALL TRIM LEVELS
2015-2017
300
ALL TRIM LEVELS
2015-2022
PACIFICA
ALL TRIM LEVELS
2017-2022
DODGE
CHALLENGER
ALL TRIM LEVELS
2015-2022
CHARGER
ALL TRIM LEVELS
2015-2022
DURANGO
ALL TRIM LEVELS
2014-2020
DURANGO
ALL TRIM LEVELS w/10.1" Screen
2021
DURANGO
ALL TRIM LEVELS w/8.4" Screen
2021
RAM TRUCK
ALL TRIM LEVELS
2013-2021
RAM TRUCK
NON-CLASSIC
2022
JEEP
CHEROKEE
ALL TRIM LEVELS
2015-2021
GLADIATOR
ALL TRIM LEVELS
2020-2022
GRAND CHEROKEE
ALL TRIM LEVELS
2014-2020
GRAND CHEROKEE
WK
2021-2023
WRANGLER
JL
2018-2023
WRANGLER
4XE
2021-2022
WRANGLER
ALL TRIM LEVELS
2024
WRANGLER UNLIMITED
JL
2018-2023
WRANGLER UNLIMITED
ALL TRIM LEVELS
2024
MASERATI
LEVANTE
ALL TRIM LEVELS
2018
QUATTROPORTE
ALL TRIM LEVELS
2017
RAM
RAM TRUCK
ALL TRIM LEVELS
2013-2021
RAM TRUCK
NON-CLASSIC
2022
Pac Audio AP4-CH41 R.2 ManualPac Audio AP4-CH41 ANC and Amplifier LocationsPac Audio AP4-CH41 R.2 Technical Bulletin
Add-On Amplifier OEM Integration Interface for Select 2007-2020 Amplified Alfa-Romeo, Chrysler, Dodge, Fiat, Jeep, Maserati, RAM and Volkswagen Vehicles
Simplify speaker wire connections when adding aftermarket amplifiers with Pac-Audio's speaker connection harnesses. This adapter can easily add amplifiers with no need to cut or modify a vehicle’s original wiring.
Features:
Works with PAC AmpPRO: AP4-CH21, AP4-CH31, and AP4-CH41
Can use it for other installations requiring plug-n-play speaker wire connections
Easily add amplifiers without cutting or modifying the vehicle’s original wiring.
Provides a plug-n-play connection at the vehicle’s original amplifier location
Saves time by quickly utilizing the original speaker wires
Harness length 18 inches
Applications
ALFA ROMEO
4C
ALL TRIM LEVELS
2018-2020
CHRYSLER
200
ALL TRIM LEVELS
2015-2017
300
ALL TRIM LEVELS
2012-2019
TOWN & COUNTRY
ALL TRIM LEVELS
2008-2016
DODGE
CHALLENGER
ALL TRIM LEVELS
2015-2020
CHARGER
ALL TRIM LEVELS
2012-2020
DART
ALL TRIM LEVELS
2013-2016
DURANGO
ALL TRIM LEVELS
2011-2020
GRAND CARAVAN
ALL TRIM LEVELS
2008-2020
JOURNEY
ALL TRIM LEVELS
2009-2020
NITRO
ALL TRIM LEVELS
2007-2011
RAM TRUCK
ALL TRIM LEVELS
2010-2018
FIAT
500
ALL TRIM LEVELS
2014-2019
JEEP
CHEROKEE
ALL TRIM LEVELS
2015-2020
GRAND CHEROKEE
ALL TRIM LEVELS
2014-2017
LIBERTY
ALL TRIM LEVELS
2008-2012
WRANGLER
ALL TRIM LEVELS
2008-2017
WRANGLER
JK
2018
WRANGLER UNLIMITED
ALL TRIM LEVELS
2008-2017
WRANGLER UNLIMITED
JK
2018
RAM
RAM TRUCK
ALL TRIM LEVELS
2010-2015
VOLKSWAGEN
ROUTAN
ALL TRIM LEVELS
2010-2014
Pac Audio APH-CH01 Manual
Ten-Inch-Size Heigh10 Head-Unit Replacement Dash Kit for Select 2011-2018 Amplified and Non-Amplified Wrangler Vehicles
RadioPRO Jeep kit for Stinger’s HEIGH10 infotainment system. The kit enables you to replace a Jeep Wrangler JK factory radio with a show-stopping HEIGH10 multimedia display while retaining most factory features and adding even more upgraded features, including Apple CarPlay, Android Auto, and more to your Jeep's stereo system!
*UN1810/HEIGH10 sold separately
Dash kit and mounting included for a beautiful factory look with the HEIGH10 Stinger display (not included).
Complete feature retention: warning chimes, steering-wheel-mounted radio controls, factory amplifier (if equipped)
Vehicle-to-radio connectivity: vehicle speed, illumination, reverse, and parking brake signals
Dual USB connection ports
Complete plug-and-play system: no vehicle modifications needed!
Flush-mounted plastics for a seamless OEM experience
FLUSH-FITTED TO MINIMIZE VIBRATION & SHAKING
The rugged mounting system was engineered to hold your HEIGH10 system securely to withstand any bumps, dips, and potholes that are on your trail.
KIT INCLUDES EVERYTHING NEEDED FOR THE INSTALLATION* INCLUDING:
Factory-Matched Radio Mounting Panels for HEIGH10
RP4-CH11 RadioPRO for Jeep Vehicles
Complete Plug-N-Play Installation Harnesses
Dash-Mount Dual USB Cable
Antenna Adapters for Satellite and AM/FM Radio
*HEIGH10 sold separately
**Not compatible with Panoramic View Monitor (PVM) camera vehicles
Due to continual development, features and specifications are subject to change.
Applications - confirmed as of 2/10/2023
Year(s)
Make
Model
Trim Level
Additional Info
2011-2017
JEEP
WRANGLER
ALL TRIM LEVELS
—
2018
JEEP
WRANGLER
JK
—
2011-2017
JEEP
WRANGLER UNLIMITED
ALL TRIM LEVELS
—
2018
JEEP
WRANGLER UNLIMITED
JK
—
Pac Audio SR-JK11H Installation Manual
Ten-Inch-Size Heigh10 Head-Unit Replacement Dash Kit for Select 2018-UP Amplified and Non-Amplified Wrangler-JL and Gladiator-JT Vehicles
RadioPRO Advanced fully integrated Jeep kit for Stinger’s HEIGH10 multimedia head unit. SRK-JW18EH enables you to replace a Jeep Wrangler or Gladiator factory radio with a show-stopping HEIGH10 while retaining factory features and adding even more upgraded features!
*UN1810/HEIGH10 sold separately
Dash kit and mounting hardware included for a beautiful factory look with either the HEIGH10* Stinger multimedia head unit
Enables interactive on-screen climate controls, vehicle settings, & customizable vehicle performance apps
Provides more control over your installation with RadioPRO Advanced controlled camera triggers, steering wheel controls, and factory amplifier control
All factory cameras in full high-definition
Dual-zone and Manual factory climate control (please check Compatibility Notes tab)
Factory amplifier
Factory USB ports
Safety group chimes, including ParkSense®
Steering wheel controls
Auxiliary switch panel settings
Heated seats / heated steering wheel
On-screen vehicle settings menu
KIT INCLUDES EVERYTHING NEEDED FOR THE INSTALLATION* INCLUDING:
Factory-matched mounting dash kits for HEIGH10
RadioPRO Advanced vehicle integration module
PAC-Link adapter for Stinger multimedia units
High-definition factory camera retention module
Vehicle-specific plug-n-play wire harness
Satellite antenna adapter
AM/FM antenna adapter
USB retention cables
External chime speaker
Applications - confirmed as of 2/10/2023
Year(s)
Make
Model
Trim Level
Additional Info
2020-2022
JEEP
GLADIATOR
ALL TRIM LEVELS
—
2018-2022
JEEP
WRANGLER
JL
—
2018-2022
JEEP
WRANGLER UNLIMITED
JL
—
Pac Audio SRK-JW18EH Installation Manual
