1500W RMS

Subs, Speakers and Electronics with an RMS Power Rating of 1500-Watts

Subs, Speakers and Electronics with an RMS Power Rating of 1500-Watts

The RMS rating of any speaker or subwoofer driver is the continuous power rating that the driver is designed to handle at a maximum volume rating. The RMS rating is one of two numbers to go by when pairing your speakers with an amplifier. As an example, a speaker with a 1500-Watt, or 1500W for short, RMS rating should be paired with a one-thousand-five-hundred-watt RMS amp. We usually recommend a power-plant to be over powered by 10 – 20% RMS so that the amplifier does not have to work at 100% capacity to get 100% efficiency from your speakers.

2 products

  • JL Audio CLS113RG-W7AE : 13" Subwoofer Enclosure, input side. JL Audio CLS113RG-W7AE : 13" Subwoofer Enclosure, 1500W RMS 1.5Ω

    JL Audio CLS113RG-W7AE : 13" Subwoofer Enclosure, 1500W RMS 1.5Ω

    Pre-Order Today!

    ProWedge-Series 13-Inch 1500-Watt Enclosed Subwoofer System, 1.5Ω Sealed Enclosure For those who seek the ultimate in compact-enclosure sub-bass fidelity, we offer this sealed ProWedge™ system, in which the superb performance capabilities of the W7AE Subwoofer are harnessed within a compact, sealed enclosure. This system has it all: extension, impact, detail and smooth response... at any listening level. This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 13W7AE-D1.5 and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat. Finish: Black, high-grade automotive carpet, with gloss-black laminated decorative front baffle trim. Three solid aluminum bars provide stylish and rugged woofer protection. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 500 - 1500WNominal Impedance: Dual 1.5 Ω General Specifications Continuous Power Handling (RMS) 1500 W System Nominal Impedance 3 Ω Enclosure Type Sealed, rear-firing design Finish Black carpet / laminate Grille Included Aluminum Bar Grille Physical Specifications External Width (W) 22.5 in / 572 mm External Height (H) 18.25 in / 464 mm External Depth (D1) 18.25 in / 464 mm External Top Surface Depth (D2) 11.50 in / 292 mm Net Weight 103.2 lb / 46.79 kg JL Audio CLS113RG-W7AE Brochure

    Pre-Order Today!

    $2,199.99

  • Kicker 44DL7S122 : 12-Inch 1500-Watt Loaded Subwoofer Enclosure, 2-Ohm Final Impedance

    Kicker 44DL7S122 : 1500W Dual 12" Square Subwoofer Enclosure, 2Ω Configuration

    Pre-Order Today!

    12-Inch 1500-Watt Loaded Subwoofer Enclosure, 2-Ohm Final Impedance This 12" L7 dual sub box enclosure features a custom-designed vent/terminal cup with an extra thick front baffle and fortified back bracing for one of the sturdiest enclosures in the industry. Two Solo-Baric L7S 12-Inch subwoofers pound out 1500W bass with a single 2Ω speaker terminal. Specifications Type dual Woofer [in, cm] Solo-Baric L7 12" Impedance [Ohms] 2 Recommended Amplifier Power (watts RMS) 1500 Peak Power (watts, per ANSI/CTA-2031-A) 3000 SENSITIVITY [dB 1w/1m] 89.9 Box Top Depth (in, cm): 16 1/4, 41.3 Box Bottom Depth (in, cm): 19 1/2, 19.4 Box Height (in, cm): 16, 40.6 Box Width (in, cm): 33 3/4, 85.7 Kicker CompC Subwoofer Enclosure Manual

    Pre-Order Today!

    $799.99

Login

Forgot your password?

Don't have an account yet?
Create account