At this present time our store location is open by appointment only.

All

All of Our Products Currently Listed on the Website

All of Our Products Currently Listed on our Website

58 products

  • Alpine R2-DB8V-TRK : Dual 8" Loaded Under Seat Subwoofer Enclosure with Amp Space, 750W @ 2Ω Jeep and other Pickups Alpine R2-DB8V-TRK : Dual 8" Loaded Under Seat Subwoofer Enclosure with Amp Space, bottom side.

    Alpine R2-DB8V-TRK : Dual 8" Loaded Under Seat Subwoofer Enclosure with Amp Space, 750W @ 2Ω Jeep and other Pickups

    Pre-Order Today!

    From towing to travel, you depend on your truck to get you where you want to go, but can you rely on getting the best performance from your sound system? Now you can add deep, accurate bass in your truck without compromising valuable cabin space with the new R2-DB8V-TRK dual 8” Alpine Halo R-Series preloaded truck subwoofer enclosure with the ProLink system and amplifier space. The enclosures were intentionally crafted to fit most full-size trucks. Two 8” subwoofers are preloaded into a compact enclosure for under the seat installation and linked with a ProLink bracket that can adjust from 51”-40”. Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine’s S-A75M Mono Power Amplifier (sold separately). Rubber “feet” are adjustable in height to accommodate uneven truck floors.  These ported subwoofer enclosures feature the next-generation 8” R-Series subwoofers with a more powerful motor that creates deeper bass while Alpine’s High Amplitude Multi-Roll (HAMR) surround technology allows the subwoofer cone to efficiently move air while staying cool for incredible accuracy. A new ceramic composite dust cap has higher heat resistance that ensures non-stop bass performance. Alpine’s new preloaded truck subwoofer enclosures join the Alpine Halo family with a premium, unmistakable design. The enclosure pulls design cues from the Alpine Halo display with unique, curved edges outlined by a silver trim and a front link bracket cover with an Alpine logo badge. The 5/8” MDF enclosures are covered in a premium black carpet that will elevate the look of your truck. With two preloaded R2-W8D2 8” R- Series subwoofers that are tuned to 36Hz, R2-DB8V-TRK is optimized to perform with Alpine’s R-Series sound system line. Dual voice coils are wired in parallel for a 2Ω load that’s compatible with Alpine’s R-Series R2-A75M mono power amplifier. Features Groundbreaking Alpine Halo Design  ProLink™ Ported Enclosure Expandable Width from 40" to 51"  Compact, Under-the-Seat Installation in Most Full-Size Trucks Integrated Amplifier Tray (not applicable with all vehicles) Rubber, Modular Stackable Foot Design Accommodates Uneven Truck Floor Areas Ported Enclosures with High-Performance S-Series Subwoofers   Front Link Alpine Branded Bracket Side-Firing Cabin Loading Ports Premium Alpine Wire Terminals CARB Compliant 5/8" MDF Construction  Premium Black Carpet  Specifications Dimensions: 40"-51" (Adjustable Width) x 8-3/4” (H) x 13-3/4” (D) 750W RMS Frequency Response: 32Hz-200Hz  Sensitivity: 84dB  Dual voice coils Wired in Parallel for a 2Ω Load (Compatible with R-A75M) Vented Enclosure Tuning Frequency: 36Hz   Custom spring-loaded speaker terminals fit up to 12AWG speaker wire  Alpine R2-DB8V-TRK BrochureAlpine R2-DB8V-TRK Manual

    Pre-Order Today!

    $799.99

  • Alpine RS-SB10 : 10" Loaded Under Seat Thin Subwoofer Enclosure, 600W @ 2Ω Alpine RS-SB10 : 10" Loaded Under Seat Thin Subwoofer Enclosure, side view.

    Alpine RS-SB10 : 10" Loaded Under Seat Thin Subwoofer Enclosure, 600W @ 2Ω

    Pre-Order Today!

    R-Series Loaded 600-Watt Thin 10-Inch 2-Ohm Subwoofer Enclosure Now you don’t have to choose between bass and space! Alpine’s R-Series Shallow preloaded subwoofer enclosure measures at a minimal 5.25” deep to deliver a loud and fun sound in most vehicle applications. Rubber “feet” are adjustable in height to accommodate uneven vehicle floors. Don’t let the size fool you – the enclosures feature the same motor movement (20MM of 1-way excursion) as the full-size R2-Series subwoofers for extreme output in a shallow woofer design. At the heart of the R-Series shallow subwoofers is an oversized 4-inch voice coil that houses the lightweight and powerful neodymium magnet for 600W RMS of power handling. Integrated cooling fins located in the core of the subwoofer help dissipate the heat generated by the rapid subwoofer movement for enhanced cooling reliability and hours of uninterrupted playtime. The unique CoolMount dual-panel mount subwoofer motor enhances cooling. Alpine’s Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, allows for better control over the motor, resulting in lower distortion and precise bass control. The preloaded enclosures use the subwoofer frame as bracing fora more ridged design and better bass response. A lightweight yet rigid aluminum dust cap allows the R-Series shallow subwoofer to transition sound quickly with minimal distortion and project the bass off the surface of the speaker for hard-hitting yet smooth bass performance. The included adjustable mounting brackets allow for a downfire mount configuration. With dual voice coils wired in parallel for a 2Ω load, the Alpine R-Series 10" shallow subwoofer enclosure is optimized to perform with Alpine's S-A60M or R-A75M mono amplifiers. Features Optimal sealed cabinet quality   Aluminum Dust Cap Neodymium Magnet    Alpine Gen2 DD Linear Magnetic Circuit   CARB compliant ¾” MDF construction   Premium Alpine embroidered black carpet  Alpine-branded terminal cup  Pre-installed steel mesh grille  Includes a 10” R-Shallow Subwoofer (RS-W10D4) Rubber, modular stackable foot design Specifications Dimensions: 21.15” W x 5.25” H x 16” L 600W RMS Power Handling  Frequency response: 29Hz – 200Hz  Dual 4Ω voice coils wired in parallel for a 2Ω load (compatible with S-A60M or R-A75M)  Nominal Impedance: 2Ω  Voice Coil: 4”(101.6mm)

    Pre-Order Today!

    $749.99

  • Alpine RS-SB12 : 12" Loaded Under Seat Thin Subwoofer Enclosure, 600W @ 2Ω Alpine RS-SB12 : 12" Loaded Under Seat Thin Subwoofer Enclosure, side view.

    Alpine RS-SB12 : 12" Loaded Under Seat Thin Subwoofer Enclosure, 600W @ 2Ω

    Pre-Order Today!

    R-Series Loaded 600-Watt Thin 12-Inch 2-Ohm Subwoofer Enclosure Now you don’t have to choose between bass and space! Alpine’s R-Series Shallow preloaded subwoofer enclosure measures at a minimal 5.25” deep to deliver a loud and fun sound in most vehicle applications. Rubber “feet” are adjustable in height to accommodate uneven vehicle floors. Don’t let the size fool you – the enclosures feature the same motor movement (20MM of 1-way excursion) as the full-size R2-Series subwoofers for extreme output in a shallow woofer design. At the heart of the R-Series shallow subwoofers is an oversized 4-inch voice coil that houses the lightweight and powerful neodymium magnet for 600W RMS of power handling. Integrated cooling fins located in the core of the subwoofer help dissipate the heat generated by the rapid subwoofer movement for enhanced cooling reliability and hours of uninterrupted playtime. The unique CoolMount dual-panel mount subwoofer motor enhances cooling. Alpine’s Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, allows for better control over the motor, resulting in lower distortion and precise bass control. The preloaded enclosures use the subwoofer frame as bracing fora more ridged design and better bass response. A lightweight yet rigid aluminum dust cap allows the R-Series shallow subwoofer to transition sound quickly with minimal distortion and project the bass off the surface of the speaker for hard-hitting yet smooth bass performance. The included adjustable mounting brackets allow for a downfire mount configuration. With dual voice coils wired in parallel for a 2Ω load, the Alpine R-Series 12" shallow subwoofer enclosure is optimized to perform with Alpine's S-A60M or R-A75M mono amplifiers. Features Optimal sealed cabinet quality   Aluminum Dust Cap Neodymium Magnet    Alpine Gen2 DD Linear Magnetic Circuit   CARB compliant ¾” MDF construction   Premium Alpine embroidered black carpet  Alpine-branded terminal cup  Pre-installed steel mesh grille  Includes a 12” R-Shallow Subwoofer (RS-W12D4) Rubber, modular stackable foot design Specifications Dimensions: 26.5” W x 5.25” H x 17” D 600W RMS Power Handling  Frequency response: 26Hz – 200Hz  Dual 4Ω voice coils wired in parallel for a 2Ω load (compatible with S-A60M or R-A75M)  Nominal Impedance: 2Ω  Voice Coil: 4”(101.6mm)

    Pre-Order Today!

    $799.99

  • Alpine S-DB8V-TRK : Dual 8" Loaded Under Seat Subwoofer Enclosure with Amp Space, 600W @ 2Ω Jeep and other Pickups Alpine S-DB8V-TRK : Dual 8" Loaded Under Seat Subwoofer Enclosure with Amp Space, bottom side.

    Alpine S-DB8V-TRK : Dual 8" Loaded Under Seat Subwoofer Enclosure with Amp Space, 600W @ 2Ω Jeep and other Pickups

    Pre-Order Today!

    S-Series Dual Loaded 600-Watt 8-Inch 2-Ohm Subwoofer Enclosure for Select Jeep Wrangler-JL Gladiator-JT and other Pickup Vehicles From towing to travel, you depend on your truck to get you where you want to go, but can you rely on getting the best performance from your sound system? Now you can add deep, accurate bass in your truck without compromising valuable cabin space with the new S-DB8V-TRK dual 8” Alpine Halo S-Series preloaded truck subwoofer enclosure with the ProLink system and amplifier space. The enclosures were intentionally crafted to fit most full-size trucks. Two 8” subwoofers are preloaded into a compact enclosure for under the seat installation and linked with a ProLink bracket that can adjust from 51”-40”. Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine’s S-A60M Mono Power Amplifier (sold separately). Rubber “feet” are adjustable in height to accommodate uneven truck floors.  The enclosures are designed for the unique cabin environment of your truck. The ported subwoofer enclosures feature Alpine’s reliable 8” S-Series subwoofers. The subwoofers are designed with an improved voice coil that brings out the full potential of the subwoofer. The custom-stamped steel frame is designed to withstand the rigors of the strong S-Series motor. Frame leg vents, as well as a vented backplate, keep the subwoofer cool for non-stop bass performance. Alpine’s new preloaded truck subwoofer enclosures join the Alpine Halo family with a premium, unmistakable design. The enclosure pulls design cues from the Alpine Halo display with unique, curved edges outlined by a silver trim and a front link bracket cover with an Alpine logo badge. The 5/8” MDF enclosures are covered in a premium black carpet that will elevate the look of your truck. With two preloaded S-W8D2 8” S- Series subwoofers that are tuned to 36Hz, the S-DB8V-TRK is optimized to perform with Alpine’s S-Series sound system line. Dual voice coils are wired in parallel for a 2Ω load that’s compatible with Alpine’s S-Series S-A60M mono power amplifier. Features Groundbreaking Alpine Halo Design  ProLink™ Ported Enclosure Expandable Width from 40" to 51"  Compact, Under-the-Seat Installation in Most Full-Size Trucks Integrated Amplifier Tray (not applicable with all vehicles) Rubber, Modular Stackable Foot Design Accommodates Uneven Truck Floor Areas Ported Enclosures with High-Performance S-Series Subwoofers   Front Link Alpine Branded Bracket Side-Firing Cabin Loading Ports Premium Alpine Wire Terminals CARB Compliant 5/8" MDF Construction  Premium Black Carpet  Specifications Dimensions: 40"-51" (Adjustable Width) x 8-3/4” (H) x 13-3/4” (D) 600W RMS Frequency Response: 34Hz-200Hz  Sensitivity: 84dB  Dual voice coils Wired in Parallel for a 2Ω Load (Compatible with S-A60M) Vented Enclosure Tuning Frequency: 36Hz   Custom spring-loaded speaker terminals fit up to 12AWG speaker wire Alpine S-DB8V-TRK BrochureAlpine S-DB8V-TRK Manual

    Pre-Order Today!

    $699.99

  • Alpine SBT-S10V : 10" 350W Loaded Sub Box, 2Ω

    Alpine SBT-S10V : 10" 350W Loaded Sub Box, 2Ω

    Pre-Order Today!

    Alpine 350-Watt 10-Inch Truck Subwoofer Enclosure, 2Ω Final Impedance With a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces. Radial Vented VC Heat Sink & Airflow Management System actively manages voice coil temperatures by forcing air directly across the heat sink system. FEA Optimized Dual-Sided Machined CRC Motor Structure creates a symmetrical magnetic field with evenly distributed flux density to greatly reduce distortion, while further improving power handling and output. The High-Amplitude Multi Roll Surround Design allows for extreme excursions without sacrificing valuable cone area. FEA Optimized for linearity and made with injection-molded Santoprene ®, the HAMR surround is a key part of the suspension system that provides accurate, distortion-free control at extreme excursions. Specifications 2Ω Impedance Ported Enclosure Design Frequency Response: 28Hz-200Hz Dimensions 21-5/8" Wide x 15-1/4" Tall x 7-1/4" Deep 1x 3-15/16" Alpine SBT-S10V Manual

    Pre-Order Today!

    $299.99

  • JL Audio CLS110RG-W7AE : 10" Subwoofer Enclosure - 750W RMS 3Ω JL Audio CLS110RG-W7AE : 10" Subwoofer Enclosure side view.

    JL Audio CLS110RG-W7AE : 10" Subwoofer Enclosure, 750W RMS 3Ω

    Pre-Order Today!

    ProWedge-Series 10-Inch 750-Watt Enclosed Subwoofer System, 3Ω Sealed Enclosure For those who seek the ultimate in compact-enclosure sub-bass fidelity, we offer this sealed ProWedge™ system, in which the superb performance capabilities of the W7AE subwoofer driver are harnessed within a compact, sealed enclosure. This system has it all: extension, impact, detail and smooth response... at any listening level. This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10W7AE-3 and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat. Finish: Black, high-grade automotive carpet, with gloss-black laminated decorative front baffle trim. Three solid aluminum bars provide stylish and rugged woofer protection. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 300 - 750WNominal Impedance: 3 Ω General Specifications Continuous Power Handling (RMS) 750 W System Nominal Impedance 3 Ω Enclosure Type Sealed, rear-firing design Finish Black carpet / laminate Grille Included Aluminum Bar Grille Physical Specifications External Width (W) 17.75 in / 451 mm External Height (H) 14.625 in / 371 mm External Depth (D1) 16.625 in / 422 mm External Top Surface Depth (D2) 11.50 in / 292 mm Net Weight 61.2 lb / 27.77 kg JL Audio CLS110RG-W7AE Brochure

    Pre-Order Today!

    $1,399.99

  • JL Audio CLS112RG-W7AE : 12" Subwoofer Enclosure - 1000W RMS 3Ω JL Audio CLS112RG-W7AE : 12" Subwoofer Enclosure - 1000W RMS 3Ω, side view.

    JL Audio CLS112RG-W7AE : 12" Subwoofer Enclosure, 1000W RMS 3Ω

    Pre-Order Today!

    ProWedge-Series 12-Inch 1000-Watt Enclosed Subwoofer System, 3Ω Sealed Enclosure For those who seek the ultimate in compact-enclosure sub-bass fidelity, we offer this sealed ProWedge™ system, in which the superb performance capabilities of the W7AE subwoofer driver are harnessed within a compact, sealed enclosure. This system has it all: extension, impact, detail and smooth response... at any listening level. This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 12W7AE-3 and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat. Finish: Black, high-grade automotive carpet, with gloss-black laminated decorative front baffle trim. Three solid aluminum bars provide stylish and rugged woofer protection. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 400 - 1000WNominal Impedance: 3 Ω General Specifications Continuous Power Handling (RMS) 1000 W System Nominal Impedance 3 Ω Enclosure Type Sealed, rear-firing design Finish Black carpet / laminate Grille Included Aluminum Bar Grille Physical Specifications External Width (W) 21.25 in / 540 mm External Height (H) 16.50 in / 419 mm External Depth (D1) 17 in / 432 mm External Top Surface Depth (D2) 11.25 in / 286 mm Net Weight 81.7 lb / 37.10 kg JL Audio CLS112RG-W7AE Brochure

    Pre-Order Today!

    $1,599.99

  • JL Audio CLS113RG-W7AE : 13" Subwoofer Enclosure, input side. JL Audio CLS113RG-W7AE : 13" Subwoofer Enclosure, 1500W RMS 1.5Ω

    JL Audio CLS113RG-W7AE : 13" Subwoofer Enclosure, 1500W RMS 1.5Ω

    Pre-Order Today!

    ProWedge-Series 13-Inch 1500-Watt Enclosed Subwoofer System, 1.5Ω Sealed Enclosure For those who seek the ultimate in compact-enclosure sub-bass fidelity, we offer this sealed ProWedge™ system, in which the superb performance capabilities of the W7AE Subwoofer are harnessed within a compact, sealed enclosure. This system has it all: extension, impact, detail and smooth response... at any listening level. This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 13W7AE-D1.5 and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat. Finish: Black, high-grade automotive carpet, with gloss-black laminated decorative front baffle trim. Three solid aluminum bars provide stylish and rugged woofer protection. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 500 - 1500WNominal Impedance: Dual 1.5 Ω General Specifications Continuous Power Handling (RMS) 1500 W System Nominal Impedance 3 Ω Enclosure Type Sealed, rear-firing design Finish Black carpet / laminate Grille Included Aluminum Bar Grille Physical Specifications External Width (W) 22.5 in / 572 mm External Height (H) 18.25 in / 464 mm External Depth (D1) 18.25 in / 464 mm External Top Surface Depth (D2) 11.50 in / 292 mm Net Weight 103.2 lb / 46.79 kg JL Audio CLS113RG-W7AE Brochure

    Pre-Order Today!

    $1,999.99

  • JL Audio CP106LG-W3v3 : 6" Subwoofer Enclosure - 150W RMS 4Ω Ported JL Audio CP106LG-W3v3 : 6" Subwoofer Enclosure - 150W RMS 4Ω Ported, side view.

    JL Audio CP106LG-W3v3 : 6" Subwoofer Enclosure, 150W RMS 4Ω Ported

    Pre-Order Today!

    MicroSub-Series 6-Inch 150-Watt Enclosed Subwoofer System, 4Ω Ported Enclosure This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 6W3v3 subwoofer driver into an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 50 - 150WNominal Impedance: 4 Ω General Specifications Continuous Power Handling (RMS) 150 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 14.125 in / 359 mm External Height (H) 9.625 in / 245 mm External Depth (D1) 5.125 in / 130 mm Net Weight 12 lb / 5.44 kg JL Audio CP106LG-W3v3 Brochure

    Pre-Order Today!

    $329.99

  • JL Audio CP108LG-W3v3 : 8" Subwoofer Enclosure - 250W RMS 4Ω Ported JL Audio CP108LG-W3v3 : 8" Subwoofer Enclosure - 250W RMS 4Ω Ported

    JL Audio CP108LG-W3v3 : 8" Subwoofer Enclosure, 250W RMS 4Ω Ported

    Pre-Order Today!

    MicroSub-Series 8-Inch 250-Watt Enclosed Subwoofer System, 4Ω Ported Enclosure  This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 8W3v3 subwoofer driver into an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 100 - 250WNominal Impedance: 4 Ω General Specifications Continuous Power Handling (RMS) 250 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 18.625 in / 473 mm External Height (H) 11.0 in / 279 mm External Depth (D1) 5.125 in / 130 mm Net Weight 17.40 lb / 7.89 kg JL Audio CP108LG-W3v3 Brochure

    Pre-Order Today!

    $399.99

  • JL Audio CP110-W0v3 : 10" Subwoofer Enclosure - 300W RMS 4Ω Ported JL Audio CP110-W0v3 : 10" Subwoofer Enclosure - 300W RMS 4Ω Ported, back side.

    JL Audio CP110-W0v3 : 10" Subwoofer Enclosure, 300W RMS 4Ω Ported

    2 Available for pickup

    BassWedge-Series 10-Inch 300-Watt Enclosed Subwoofer System, 4Ω Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 75 - 300WNominal Impedance: 4 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No Physical Specifications External Width (W) 15.51 in / 394 mm External Height (H) 13.77 in / 350 mm External Depth (D1) 17.38 in / 441 mm External Top Surface Depth (D2) 14 in / 356 mm Net Weight 29 lb / 13.15 kg JL Audio CP110-W0v3 Brochure

    2 Available for pickup

    $249.99

  • JL Audio CP110LG-TW1-2 : 10" Thin Subwoofer Enclosure - 300W RMS 2Ω Ported JL Audio CP110LG-TW1-2 : 10" Thin Subwoofer Enclosure - 300W RMS 2Ω Ported, side view.

    JL Audio CP110LG-TW1-2 : 10" Thin Subwoofer Enclosure, 300W RMS 2Ω Ported

    Pre-Order Today!

    MicroSub-Series 10-Inch 300-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 10TW1 subwoofer driver into an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 75 - 300WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 2 Ω Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 20.875 in / 530 mm External Height (H) 13.25 in / 337 mm External Depth (D1) 6.375 in / 162 mm Net Weight 25.70 lb / 11.66 kg JL Audio CP110LG-TW1-2 Brochure

    Pre-Order Today!

    $449.99

  • JL Audio CP112-W0v3 : 12" Subwoofer Enclosure - 300W RMS 4Ω Ported JL Audio CP112-W0v3 : 12" Subwoofer Enclosure - 300W RMS 4Ω Ported, back side.

    JL Audio CP112-W0v3 : 12" Subwoofer Enclosure, 300W RMS 4Ω Ported

    2 Available for pickup

    BassWedge-Series 12-Inch 300-Watt Enclosed Subwoofer System, 4Ω Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 75 - 300WNominal Impedance: 4 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No Physical Specifications External Width (W) 16.31 in / 414 mm External Height (H) 15.18 in / 386 mm External Depth (D1) 20.3 in / 516 mm External Top Surface Depth (D2) 15.75 in / 400 mm Net Weight 33.1 lb / 15 kg JL Audio CP112-W0v3 Brochure

    2 Available for pickup

    $299.99

  • JL Audio CP112LG-TW1-2 : 12" Thin Subwoofer Enclosure - 300W RMS 2Ω Ported JL Audio CP112LG-TW1-2 : 12" Thin Subwoofer Enclosure - 300W RMS 2Ω Ported, side view.

    JL Audio CP112LG-TW1-2 : 12" Thin Subwoofer Enclosure, 300W RMS 2Ω Ported

    Pre-Order Today!

    MicroSub-Series 12-Inch 300-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 12TW1 subwoofer driver into an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 75 - 300WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 2 Ω Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 23.75 in / 603 mm External Height (H) 15.751 in / 400 mm External Depth (D1) 9.25 in / 235 mm Net Weight 38.3 lb / 17.37 kg JL Audio CP112LG-TW1-2 Brochure

    Pre-Order Today!

    $499.99

  • JL Audio CP208LG-W3v3 : Dual 8" Subwoofer Enclosure - 500W RMS 2Ω Ported JL Audio CP208LG-W3v3 : Dual 8" Subwoofer Enclosure - 500W RMS 2Ω Ported, side view.

    JL Audio CP208LG-W3v3 : Dual 8" Subwoofer Enclosure, 500W RMS 2Ω Ported

    Pre-Order Today!

    MicroSub-Series 8" Enclosed Dual 8-Inch 500-Watt Subwoofer System, 2Ω Ported Enclosure This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its dual 8W3v3 subwoofer drivers, each in separate airspace, with an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port for each driver wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The two flared port entries/exits, one on each end of the enclosure, further enhance sound quality by minimizing air-flow noises through these ports. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. Steel mesh grilles are included to protect the subwoofer drivers. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 200 - 500WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 500 W System Nominal Impedance 2 Ω Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh Physical Specifications Net Weight 32.2 lb / 14.61 kg External Width (W) 35.5 in / 902 mm External Height (H) 11.0 in / 279 mm External Depth (D1) 5.125 in / 130 mm JL Audio CP208LG-W3v3 Brochure

    Pre-Order Today!

    $729.99

  • JL Audio CP210-W0v3 : Dual 10" Subwoofer Enclosure - 600W RMS 2Ω Ported JL Audio CP210-W0v3 : Dual 10" Subwoofer Enclosure - 600W RMS 2Ω Ported, back side.

    JL Audio CP210-W0v3 : Dual 10" Subwoofer Enclosure, 600W RMS 2Ω Ported

    Pre-Order Today!

    BassWedge-Series Dual 10-Inch 600-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofers to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofers firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 150 - 600WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 600 W System Nominal Impedance 2 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No Physical Specifications External Width (W) 29.61 in / 752 mm External Height (H) 13.77 in / 350 mm External Depth (D1) 17.38 in / 441 mm External Top Surface Depth (D2) 14 in / 356 mm Net Weight 50.7 lb / 23 kg JL Audio CP210-W0v3 Brochure

    Pre-Order Today!

    $399.99

  • JL Audio CP212-W0v3 : Dual 12" Subwoofer Enclosure - 600W RMS 2Ω Ported JL Audio CP212-W0v3 : Dual 12" Subwoofer Enclosure - 600W RMS 2Ω Ported, back side.

    JL Audio CP212-W0v3 : Dual 12" Subwoofer Enclosure, 600W RMS 2Ω Ported

    Pre-Order Today!

    BassWedge-Series Dual 12-Inch 600-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofers to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofers firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 150 - 600WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 600 W System Nominal Impedance 2 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No Physical Specifications External Width (W) 31.375 in / 797 mm External Height (H) 15.18 in / 386 mm External Depth (D1) 20.3 in / 516 mm External Top Surface Depth (D2) 15.75 in / 400 mm Net Weight 60.3 lb / 27.35 kg JL Audio CP212-W0v3 Brochure

    Pre-Order Today!

    $499.99

  • JL Audio CS110LG-TW1-2 : 10" Thin Subwoofer Enclosure - 300W RMS 2Ω JL Audio CS110LG-TW1-2 : 10" Thin Subwoofer Enclosure - 300W RMS 2Ω, side view.

    JL Audio CS110LG-TW1-2 : 10" Thin Subwoofer Enclosure, 300W RMS 2Ω

    Pre-Order Today!

    PowerWedge-Series 10-Inch 300-Watt Enclosed Subwoofer System, 2Ω Sealed Enclosure In this low-profile PowerWedge™ subwoofer system, JL harnesses the performance and insanely small box requirements of the TW1 subwoofer driver to deliver amazing sub-bass from an enclosure that is only 5.56 in. (141 mm) deep. This low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW1 and has been fine-tuned through extensive real-world listening. The PowerWedge™ subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the top surface of the enclosure. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 75 - 300WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 2 Ω Enclosure Type Sealed Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 15 in / 381 mm External Height (H) 11.75 in / 298 mm External Depth (D1) 5.563 in / 141 mm Net Weight 17.42 lb / 7.90 kg JL Audio CS110LG-TW1-2 Brochure

    Pre-Order Today!

    $399.99

  • JL Audio CS110LG-TW3 : 10" Thin Subwoofer Enclosure - 400W RMS 2Ω JL Audio CS110LG-TW3 : 10" Thin Subwoofer Enclosure - 400W RMS 2Ω, side view.

    JL Audio CS110LG-TW3 : 10" Thin Subwoofer Enclosure, 400W RMS 2Ω

    Pre-Order Today!

    PowerWedge-Series 10-Inch 400-Watt Enclosed Subwoofer System, 2Ω Sealed Enclosure In this low-profile PowerWedge™ subwoofer system, JL harnesses the performance of the 10TW3 to deliver amazing sub-bass from an enclosure that is only 4.5 in. (114 mm) deep. This low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW3-D4 and has been fine-tuned through extensive real-world listening. The PowerWedge™ subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 100 - 400WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 400 W System Nominal Impedance 2 Ω Enclosure Type Sealed Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 20.75 in / 527 mm External Height (H) 14 in / 357 mm External Depth (D1) 4.5 in / 114 mm Net Weight 21.2 lb / 9.6 kg JL Audio CS110LG-TW3 Brochure

    Pre-Order Today!

    $529.99

  • JL Audio CS110TG-TW3 : 10" Thin Subwoofer Enclosure - 400W RMS 2Ω JL Audio CS110TG-TW3 : 10" Thin Subwoofer Enclosure - 400W RMS 2Ω, side view.

    JL Audio CS110TG-TW3 : 10" Thin Subwoofer Enclosure, 400W RMS 2Ω

    Pre-Order Today!

    PowerWedge-Series 10-Inch 400-Watt Enclosed Subwoofer System, 2Ω Sealed Enclosure In this sealed Truck PowerWedge™ subwoofer system, JL harnesses the performance of the 10TW3 to deliver amazing sub-bass from an enclosure that is only 6.25 in. (159 mm) deep at its base and 4.1 in. (104 mm) at the top. This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW3 and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 100 - 400WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 400 W System Nominal Impedance 2 Ω Enclosure Type Sealed, truck enclosure Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 19 in / 483 mm External Height (H) 12.375 in / 314 mm External Depth (D1) 6.25 in / 159 mm External Top Surface Depth (D2) 4.1 in / 104 mm Net Weight 21.2 lb / 9.6 kg JL Audio CS110TG-TW3 Brochure

    Pre-Order Today!

    $529.99

  • JL Audio CS112LG-TW1-2 : 12" Thin Subwoofer Enclosure - 300W RMS 2Ω JL Audio CS112LG-TW1-2 : 12" Thin Subwoofer Enclosure - 300W RMS 2Ω, side view.

    JL Audio CS112LG-TW1-2 : 12" Thin Subwoofer Enclosure, 300W RMS 2Ω

    Pre-Order Today!

    PowerWedge-Series 12-Inch 300-Watt Enclosed Subwoofer System, 2Ω Sealed Enclosure In this low-profile PowerWedge™ subwoofer system, JL harnesses the performance and insanely small box requirements of the TW1 subwoofer driver to deliver amazing sub-bass from an enclosure that is only 6.6 in. (168 mm) deep. This low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 12TW1 and has been fine-tuned through extensive real-world listening. The PowerWedge™ subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the top surface of the enclosure. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 75 - 300WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 2 Ω Enclosure Type Sealed Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 18 in / 457 mm External Height (H) 13.75 in / 349 mm External Depth (D1) 6.625 in / 168 mm Net Weight 26.02 lb / 11.80 kg JL Audio CS112LG-TW1-2 Brochure

    Pre-Order Today!

    $499.99

  • JL Audio CS112LG-TW3 : 12" Thin Subwoofer Enclosure - 400W RMS 2Ω JL Audio CS112LG-TW3 : 12" Thin Subwoofer Enclosure - 400W RMS 2Ω, side view.

    JL Audio CS112LG-TW3 : 12" Thin Subwoofer Enclosure, 400W RMS 2Ω

    Pre-Order Today!

    PowerWedge-Series 12-Inch 400-Watt Enclosed Subwoofer System, 2Ω Sealed Enclosure In this low-profile PowerWedge™ subwoofer system, JL harnesses the performance of the 12TW3 to deliver amazing sub-bass from an enclosure that is only 4.5 in. (114 mm) deep. This low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 12TW3-D4 and has been fine-tuned through extensive real-world listening. The PowerWedge™ subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 100 - 400WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 400 W System Nominal Impedance 2 Ω Enclosure Type Sealed Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 23.75 in / 603 mm External Height (H) 15.625 in / 397 mm External Depth (D1) 5.0625 in / 129 mm Net Weight 30.5 lb / 13.8 kg JL Audio CS112LG-TW3 Brochure

    Pre-Order Today!

    $549.99

  • JL Audio CS112TG-TW3 : 12" Thin Subwoofer Enclosure - 400W RMS 2Ω JL Audio CS112TG-TW3 : 12" Thin Subwoofer Enclosure - 400W RMS 2Ω, side view.

    JL Audio CS112TG-TW3 : 12" Thin Subwoofer Enclosure, 400W RMS 2Ω

    Pre-Order Today!

    PowerWedge-Series 12-Inch 400-Watt Enclosed Subwoofer System, 2Ω Sealed Enclosure In this sealed Truck PowerWedge™ subwoofer system, JL harnesses the performance of the 12TW3 to deliver amazing sub-bass from an enclosure that is only 7 in. (178 mm) deep at its base and 4.5 in. (114 mm) at the top. This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 12TW3 and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 100 - 400WNominal Impedance: 2 Ω General Specifications System Nominal Impedance 2 Ω Grille Included Black Steel Mesh Finish Black carpet Enclosure Type Sealed, truck enclosure Continuous Power Handling (RMS) 400 W Physical Specifications External Width (W) 21.75 in / 537 mm External Height (H) 14.625 in / 371 mm External Depth (D1) 7 in / 178 mm External Top Surface Depth (D2) 4.5 in / 114 mm Net Weight 29 lb / 13.2 kg JL Audio CS112TG-TW3 Brochure

    Pre-Order Today!

    $549.99

  • JL Audio CS113TG-TW5v2 : 13" Thin Subwoofer Enclosure - 600W RMS 2Ω JL Audio CS113TG-TW5v2 : 13" Thin Subwoofer Enclosure - 600W RMS 2Ω, side view.

    JL Audio CS113TG-TW5v2 : 13" Thin Subwoofer Enclosure, 600W RMS 2Ω

    Pre-Order Today!

    PowerWedge-Series 13-Inch 600-Watt Enclosed Subwoofer System, 2Ω Sealed Enclosure The 13TW5v2 low-profile subwoofer driver has received awards from around the world for its breakthrough performance capabilities in impossibly tight spaces. In this sealed Truck PowerWedge™ subwoofer system, JL harnessed the performance of this patented subwoofer driver to deliver amazing sub-bass performance from an enclosure that is only 7.25 in. (184 mm) deep at its base and 4.5 in. (114 mm) at the top. This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 13TW5v2 and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 250 - 600WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 600 W System Nominal Impedance 2 Ω Enclosure Type Sealed, truck enclosure Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 21.25 in / 540 mm External Height (H) 15.75 in / 400 mm External Depth (D1) 7.25 in / 184 mm External Top Surface Depth (D2) 4.5 in / 114 mm Net Weight 34 lb / 15.42 kg JL Audio CS113TG-TW5v2 Brochure

    Pre-Order Today!

    $879.99

  • JL Audio CS210LG-TW1 : Dual 10" Thin Subwoofer Enclosure - 600W RMS 2Ω JL Audio CS210LG-TW1 : Dual 10" Thin Subwoofer Enclosure - 600W RMS 2Ω, side view.

    JL Audio CS210LG-TW1 : Dual 10" Thin Subwoofer Enclosure - 600W RMS 2Ω - Unavailable

    Pre-Order Today!

    PowerWedge-Series Dual 10-Inch Enclosed Subwoofer System, 2Ω Sealed Enclosure Harnessing the performance and insanely small box requirements of the TW1 subwoofer drivers, this PowerWedge™ subwoofer system houses dual 10TW1 subwoofers in a compact sealed enclosure, resulting in deep, powerful bass output from an enclosure that’s only about the size of most other single driver systems. This low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for dual 10TW1-4 drivers and has been fine-tuned through extensive real-world listening. The PowerWedge™ subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the front baffle. Steel mesh grilles are included to protect the subwoofer drivers. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 150 - 600WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 600 W System Nominal Impedance 2 Ω Enclosure Type Sealed Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 22 in / 559 mm External Height (H) 11.75 in / 298 mm External Depth (D1) 7.313 in / 186 mm Net Weight 34.20 lb / 15.51 kg JL Audio CS210LG-TW1 Brochure

    Pre-Order Today!

    $699.99

  • JL Audio CS212LG-TW1 : Dual 12" Thin Subwoofer Enclosure, 600W RMS 2Ω JL Audio CS212LG-TW1 : Dual 12" Thin Subwoofer Enclosure, input side.

    JL Audio CS212LG-TW1 : Dual 12" Thin Subwoofer Enclosure, 600W RMS 2Ω

    Pre-Order Today!

    PowerWedge-Series Dual 12-Inch Enclosed Subwoofer System, 2Ω Sealed Enclosure Harnessing the performance and insanely small box requirements of the TW1 Subwoofers, this PowerWedge subwoofer system houses dual 12TW1 subwoofers in a compact sealed enclosure, resulting in deep, powerful bass output from an enclosure that’s only about the size of most other single driver systems. This low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for dual 12TW1-4 drivers and has been fine-tuned through extensive real-world listening. The PowerWedge subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the front baffle. Steel mesh grilles are included to protect the Subwoofers. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 150-600WNominal Impedance: 2Ω General Specifications Continuous Power Handling (RMS) 600 W System Nominal Impedance 2Ω Enclosure Type Sealed Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 26.25 in / 667 mm External Height (H) 14 in / 356 mm External Depth (D1) 8.875 in / 225 mm Net Weight 49.90 lb / 22.6 kg JL Audio CS212LG-TW1 Brochure

    Pre-Order Today!

    $799.99

  • JL Audio HO110-W6v3 : 10" Subwoofer Enclosure - 600W RMS 2Ω Ported JL Audio HO110-W6v3 : 10" Subwoofer Enclosure - 600W RMS 2Ω Ported, input side.

    JL Audio HO110-W6v3 : 10" Subwoofer Enclosure, 600W RMS 2Ω Ported

    Pre-Order Today!

    High Output Series 10-Inch 600-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure JL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. In the HO110-W6v3, the high power handling of the 10W6v3 subwoofer driver, combined with its small enclosure requirements, results in a very compact subwoofer system that is capable of impressive output with moderate amplification. JL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates just above the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W6v3 driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 10W6v3, and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. While no grille is provided, the recessed mounting baffle provides some protection for the woofer. A steel mesh woofer grille insert can be purchased separately (Model: SGR-10W6v2/v3), if additional woofer protection is desired. Finish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. "JL AUDIO" is embroidered in silver on the side surface of the enclosure. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 200 - 600WNominal Impedance: 2Ω General Specifications Continuous Power Handling (RMS) 600 W System Nominal Impedance 2 Ω Enclosure Type Chamber-coupled, slot-ported, rear-firing design Finish Dark gray carpet with black insert Grille Included No Physical Specifications External Width (W) 12.125 in / 308 mm External Height (H) 14 in / 356 mm External Depth (D1) 21.75 in / 552 mm Net Weight 47.8 lb / 21.7 kg JL Audio HO110-W6v3 Brochure

    Pre-Order Today!

    $899.99

  • JL Audio HO110RG-W3v3 : 10" Subwoofer Enclosure - 500W RMS 2Ω JL Audio HO110RG-W3v3 : 10" Subwoofer Enclosure - 500W RMS 2Ω, input side.

    JL Audio HO110RG-W3v3 : 10" Subwoofer Enclosure, 500W RMS 2Ω Ported

    Pre-Order Today!

    High Output Series 10-Inch 500-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure JL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. JL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates on one side of the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W3v3 driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 10W3v3, and has been fine-tuned through extensive real-world listening. This efficient system will produce superb output with as little as 150W of amplifier power, but performs best with 300 - 500W of power. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Three solid aluminum bars provide stylish and rugged woofer protection. The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat. Finish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. "JL AUDIO" is embroidered in silver on the top surface of the enclosure. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 150 - 500WNominal Impedance: 2Ω General Specifications Continuous Power Handling (RMS) 500 W System Nominal Impedance 2 Ω Enclosure Type Chamber-coupled, slot-ported, rear-firing design Finish Dark gray carpet with black insert Grille Included Aluminum Bar Grille Physical Specifications External Width (W) 29.5 in / 749 mm External Height (H) 13.5 in / 343 mm External Depth (D1) 12.0 in / 305 mm External Top Surface Depth (D2) 7.5 in / 190.5 mm Net Weight 34.7 lb / 15.74 kg JL Audio HO110RG-W3v3 Brochure

    Pre-Order Today!

    $549.99

  • JL Audio HO112-W6v3 : 12" Subwoofer Enclosure - 600W RMS 2Ω Ported JL Audio HO112-W6v3 : 12" Subwoofer Enclosure - 600W RMS 2Ω Ported, input side.

    JL Audio HO112-W6v3 : 12" Subwoofer Enclosure, 600W RMS 2Ω Ported

    Pre-Order Today!

    High Output Series 12-Inch 600-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure JL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. In the HO112-W6v3, the high power handling of the 12W6v3 subwoofer driver, combined with its small enclosure requirements, results in a very compact subwoofer system that is capable of impressive output with moderate amplification. JL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates just above the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W6v3 driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 12W6v3, and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. While no grille is provided, the recessed mounting baffle provides some protection for the woofer. A steel mesh woofer grille insert can be purchased separately (Model: SGR-12W6v2/v3), if additional woofer protection is desired. Finish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. "JL AUDIO" is embroidered in silver on the side surface of the enclosure. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 200 - 600WNominal Impedance: 2Ω General Specifications Continuous Power Handling (RMS) 600 W System Nominal Impedance 2 Ω Enclosure Type Chamber-coupled, slot-ported, rear-firing design Finish Dark gray carpet with black insert Grille Included No Physical Specifications External Width (W) 14.5 in / 368 mm External Height (H) 16 in / 406 mm External Depth (D1) 24 in / 610 mm Net Weight 60.7 lb / 27.52 kg JL Audio HO112-W6v3 Brochure

    Pre-Order Today!

    $1,099.99

  • JL Audio HO112R-W7AE : 12" Subwoofer Enclosure - 1000W RMS 3Ω Ported JL Audio HO112R-W7AE : 12" Subwoofer Enclosure - 1000W RMS 3Ω Ported, input side.

    JL Audio HO112R-W7AE : 12" Subwoofer Enclosure, 1000W RMS 3Ω Ported

    Pre-Order Today!

    High Output Series 12-Inch 1000-Watt Enclosed Subwoofer System, 3Ω Ported Enclosure JL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. JL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates just above the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W7AE driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 12W7AE-3 and has been fine-tuned through extensive real-world listening. The high power handling of the 12W7AE, combined with the efficiency of this subwoofer system, produce a devastating performance combination. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. While no grille is provided, the recessed mounting baffle provides some protection for the woofer. The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat. Finish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. "JL AUDIO" is embroidered in silver on the top surface of the enclosure. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 400 - 1000WNominal Impedance: 3Ω General Specifications Continuous Power Handling (RMS) 1000 W System Nominal Impedance 3 Ω Enclosure Type Chamber-coupled, slot-ported, rear-firing design Finish Dark gray carpet with black insert Grille Included No Physical Specifications External Width (W) 34.0 in / 864 mm External Height (H) 17.0 in / 432 mm External Depth (D1) 20.5 in / 521 mm External Top Surface Depth (D2) 14.5 in / 368 mm Net Weight 119.0 lb / 53.95 kg JL Audio HO112R-W7AE Brochure

    Pre-Order Today!

    $1,599.99

  • JL Audio HO112RG-W3v3 : 12" Subwoofer Enclosure - 500W RMS 2Ω Ported JL Audio HO112RG-W3v3 : 12" Subwoofer Enclosure - 500W RMS 2Ω Ported, input side.

    JL Audio HO112RG-W3v3 : 12" Subwoofer Enclosure, 500W RMS 2Ω Ported

    Pre-Order Today!

    High Output Series 12-Inch 500-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure JL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. JL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates on one side of the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W3v3 driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 12W3v3, and has been fine-tuned through extensive real-world listening. This efficient system will produce superb output with as little as 150W of amplifier power, but performs best with 300 - 500W of power. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Three solid aluminum bars provide stylish and rugged woofer protection. The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat. Finish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. "JL AUDIO" is embroidered in silver on the top surface of the enclosure. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 150 - 500WNominal Impedance: 2Ω General Specifications Continuous Power Handling (RMS) 500 W System Nominal Impedance 2 Ω Enclosure Type Chamber-coupled, slot-ported, rear-firing design Finish Dark gray carpet with black insert Grille Included Aluminum Bar Grille Physical Specifications External Width (W) 32.25 in / 819 mm External Height (H) 15.25 in / 387 mm External Depth (D1) 13.5 in / 343 mm External Top Surface Depth (D2) 7.5 in / 190.5 mm Net Weight 46.9 lb / 21.27 kg JL Audio HO112RG-W3v3 Brochure

    Pre-Order Today!

    $599.99

  • Kicker 44DCWC102 : 10-Inch Dual Loaded Subwoofer Enclosure, 2-Ohm Final Impedance. Kicker 44DCWC102 : 10-Inch Dual Loaded Subwoofer Enclosure, 2-Ohm Final Impedance, front side view.

    Kicker 44DCWC102 : 600W Dual 10" Subwoofer Enclosure, 2Ω Configuration

    Pre-Order Today!

    10-Inch 600-Watt Dual Loaded Subwoofer Enclosure, 2-Ohm Final Impedance The CompC dual 10" sub box drivers from Kicker that are loaded into this spec-built enclosure have thick stamped steel baskets that hold injection-molded polypropylene cones with stabilizing ribs in the surround. This CompC 10" dual loaded sub box is rated for 600W RMS of amplified power.  Specifications Dual Subwoofers (in, cm) (2) 10, 25 Impedance (Ohms) 2 Recommended Amplifier Power (watts RMS) 600 Peak Power (watts, per ANSI/CTA-2031-A) 1200 Sensitivity (dB 1w/1m) 98.4 Box Top Depth (in, cm) 13 7/16, 34.1 Box Bottom Depth (in, cm) 16 3/8, 41.6 Box Height (in, cm) 14, 35.6 Box Width (in, cm) 28, 71.1 Recommended Amplifiers! Kicker CX600.1 Kicker CompC Subwoofer Enclosure Manual

    Pre-Order Today!

    $329.99

  • 600W Dual 12" Subwoofer Enclosure, 2Ω Configuration : Kicker 44DCWC122 600W Dual 12" Subwoofer Enclosure, 2Ω Configuration : Kicker 44DCWC122, front side view.

    Kicker 44DCWC122 : 600W Dual 12" Subwoofer Enclosure, 2Ω Configuration

    Pre-Order Today!

    12-Inch 600-Watt Dual Loaded Subwoofer Enclosure, 2-Ohm Final Impedance The CompC dual 12" sub box drivers from Kicker that are loaded into this spec-built enclosure have thick stamped steel baskets that hold injection-molded polypropylene cones with stabilizing ribs in the surround. This CompC 12" dual loaded sub box is rated for 600W RMS of amplified power at 2Ω.  Specifications Dual Subwoofers (in, cm) (2) 12, 30 Impedance (Ohms) 2 Recommended Amplifier Power (watts RMS) 600 Peak Power (watts, per ANSI/CTA-2031-A) 1200 Sensitivity (dB 1w/1m) 99.9 Box Top Depth (in, cm) 14, 35.6 Box Bottom Depth (in, cm) 17 3/8, 44.1 Box Height (in, cm) 16, 40.6 Box Width (in, cm) 32 3/8, 82.2 Recommended Amplifiers! CX600.1 Kicker CompC Subwoofer Enclosure Manual

    Pre-Order Today!

    $349.99

  • Kicker 44DL7S122 : 12-Inch 1500-Watt Loaded Subwoofer Enclosure, 2-Ohm Final Impedance

    Kicker 44DL7S122 : 1500W Dual 12" Square Subwoofer Enclosure, 2Ω Configuration

    Pre-Order Today!

    12-Inch 1500-Watt Loaded Subwoofer Enclosure, 2-Ohm Final Impedance This 12" L7 dual sub box enclosure features a custom-designed vent/terminal cup with an extra thick front baffle and fortified back bracing for one of the sturdiest enclosures in the industry. Two Solo-Baric L7S 12-Inch subwoofers pound out 1500W bass with a single 2Ω speaker terminal. Specifications Type dual Woofer [in, cm] Solo-Baric L7 12" Impedance [Ohms] 2 Recommended Amplifier Power (watts RMS) 1500 Peak Power (watts, per ANSI/CTA-2031-A) 3000 SENSITIVITY [dB 1w/1m] 89.9 Box Top Depth (in, cm): 16 1/4, 41.3 Box Bottom Depth (in, cm): 19 1/2, 19.4 Box Height (in, cm): 16, 40.6 Box Width (in, cm): 33 3/4, 85.7 Kicker CompC Subwoofer Enclosure Manual

    Pre-Order Today!

    $799.99

  • 300W 10" Thin Subwoofer Enclosure, 2Ω Configuration : Kicker 44TCWC102 300W 10" Thin Subwoofer Enclosure, 2Ω Configuration : Kicker 44TCWC102 front side view.

    Kicker 44TCWC10 : 300W 10" Thin Subwoofer Enclosure, 2Ω or 4Ω Configuration

    Pre-Order Today!

    10-Inch 300-Watt Thin Subwoofer Enclosure, 2-Ohm or 4-Ohm Final Impedance This CompC 10" thin loaded loaded sub box is custom-sized to optimize subwoofer performance. This enclosure can fit under or behind a rear seat, has heavy MDF construction, is covered in black carpet with yellow embroidery, and comes with spring loaded speaker terminals for an easy connection of your subwoofer wire.  These thin 44TCWC102 and 44TCWC104 10-inch enclosure works best with 300 watts of RMS amplified power. Specifications Subwoofer (in, cm) 10, 25 Impedance (Ohms) 2, 4 Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 Sensitivity (dB 1w/1m) 93.8 Box Top Depth (in, cm) 4,10.2 Box Bottom Depth (in, cm) 7 5/8, 19.4 Box Height (in, cm) 15, 38.1 Box Width (in, cm) 21 1/2, 54.6 Kicker CompC Subwoofer Enclosure Manual

    Pre-Order Today!

    $179.99

  • 600W 10" Thin Subwoofer Enclosure, 2Ω Configuration : Kicker 44TL7S10 600W 10" Thin Subwoofer Enclosure, 2Ω Configuration : Kicker 44TL7S10 front side view.

    Kicker 44TL7S102 : 600W 10" Thin Subwoofer Enclosure, 2Ω Configuration

    Pre-Order Today!

    10-Inch 600-Watt Loaded Thin Subwoofer Enclosure, 2-Ohm Final Impedance This L7 series thin 10" loaded sub box by Kicker comes with one Solo-Baric L7S sub loaded into a custom engineered to spec subwoofer enclosure made of thick MDF construction with a custom port design. Heavy internal bracing with thick black carpeting complement the Kicker embroidered logo on this box. This 10-inch L7 thin subwoofer enclosure is best suited with 600W RMS of amplified power. Specifications Type thin-profile Woofer [in, cm] Solo-Baric L7S 10" 2Ω Impedance [Ohms] 2 Recommended Amplifier Power (watts RMS) 600 Peak Power (watts, per ANSI/CTA-2031-A) 1200 SENSITIVITY [dB 1w/1m] 89.5 Box Top Depth (in, cm): 6 1/2, 16.4 Box Bottom Depth (in, cm): 10, 25.4 Box Height (in, cm): 15, 38.1 Box Width (in, cm): 21 1/2, 54.6 Kicker L7 Solo-Baric Subwoofer Enclosure Manual

    Pre-Order Today!

    $379.99

  • 300W 12" Subwoofer Enclosure, 2Ω or 4Ω Configuration : Kicker 44TCWC12 300W 12" Subwoofer Enclosure, 2Ω or 4Ω Configuration : Kicker 44TCWC12 front side view.

    Kicker 44VCWC12 : 300W 12" Subwoofer Enclosure, 2Ω or 4Ω Configuration

    Pre-Order Today!

    12-Inch 300-Watt Subwoofer Enclosure, 2-Ohm or 4-Ohm Final Impedance This CompC 12" loaded loaded sub box is custom-sized to optimize subwoofer performance. This enclosure is covered in black carpet with yellow embroidery, and comes with spring loaded speaker terminals for an easy connection of your subwoofer wire.  This thin 2Ω or 4Ω 12-inch enclosure works best with 300 watts of RMS amplified power. Specifications Subwoofer (in, cm) 12, 30 Impedance (Ohms) 2 Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 Sensitivity (dB 1w/1m) 95.3 Box Top Depth (in, cm) 11 7/16, 29 Box Bottom Depth (in, cm) 14 5/8, 37.2 Box Height (in, cm) 16, 40.6 Box Width (in, cm) 17 1/2, 44.5 Kicker CompC Subwoofer Enclosure Manual

    Pre-Order Today!

    $229.99

  • 750W 12" Subwoofer Enclosure, 2Ω Configuration : Kicker 44VL7S122

    Kicker 44VL7S122 : 750W 12" Subwoofer Enclosure, 2Ω Configuration

    Pre-Order Today!

    12-Inch 750-Watt Loaded Subwoofer Enclosure, 2-Ohm Final Impedance This L7 series 12" loaded sub box by Kicker comes with one Solo-Baric L7S sub loaded into a custom engineered to spec subwoofer enclosure made of thick MDF construction with a custom port design. Heavy internal bracing with thick black carpeting complement the Kicker embroidered logo on this box. This 12-inch L7 subwoofer enclosure is best suited with 750W RMS of amplified power. Specifications Type single Woofer [in, cm] Solo-Baric L7 12" Impedance [Ohms] 2 Recommended Amplifier Power (watts RMS) 750 Peak Power (watts, per ANSI/CTA-2031-A) 1500 SENSITIVITY [dB 1w/1m] 86.9 Box Top Depth (in, cm): 14 3/4, 37.4 Box Bottom Depth (in, cm): 17 7/8, 45.5 Box Height (in, cm): 16, 40.6 Box Width (in, cm): 18-3/4, 47.6 Kicker L7 Solo-Baric Subwoofer Enclosure Manual

    Pre-Order Today!

    $449.99

  • 1200W Dual 12" Subwoofer Enclosure, 2Ω Configuration : Kicker 45DL7R122 1200W Dual 12" Subwoofer Enclosure, 2Ω Configuration : Kicker 45DL7R122 front side view.

    Kicker 45DL7R122 : 1200W Dual 12" Subwoofer Enclosure, 2Ω Configuration

    Pre-Order Today!

    Dual 12-Inch 1200-Watt Loaded Subwoofer Enclosure, 2-Ohm Final Impedance This L7 series dual 12" loaded sub box by Kicker comes with two Solo-Baric L7S sub loaded into a custom engineered to spec subwoofer enclosure made of thick MDF construction with a custom port design. Heavy internal bracing with thick black carpeting complement the Kicker embroidered logo on this box. This 12-inch L7 dual subwoofer enclosure is best suited with 1200W RMS of amplified power. Specifications Type dual Woofers/size [in, cm] 2 Solo-Baric L7R 12" Impedance [Ohms] 2 Recommended Amplifier Power [watts RMS] 1200 SENSITIVITY [dB 1w/1m] 95 Box Top Depth (in, cm): 15 1/4, 38.7 Box Bottom Depth (in, cm): 20 3/8, 51.8 Box Height (in, cm): 15 7/8, 40.2 Box Width (in, cm): 33 3/4, 85.7

    Pre-Order Today!

    $599.99

  • 500W 10" Thin Subwoofer Enclosure, 2Ω Configuration : Kicker 45TL7R102 500W 10" Thin Subwoofer Enclosure, 2Ω Configuration : Kicker 45TL7R102 front side view.

    Kicker 45TL7R102 : 500W 10" Thin Square Subwoofer Enclosure, 2Ω Configuration

    Pre-Order Today!

    10-Inch 500-Watt Loaded Thin Square Subwoofer Enclosure, 2-Ohm Final Impedance With this TL7R series thin 10" square sub box you get up to 20% more air movement compared to a round driver. This 500W loaded enclosure has an angled back, heavy duty internal bracing, thick MDF construction and black carpeting with a Kicker embroidered logo. This TL7R subwoofer enclosure contains a single 10 Inch square driver with an RMS power rating of 500W @ 2Ω. Specifications Type single truck Woofer [in, cm] Solo-Baric L7R 10" Impedance [Ohms] 2 Recommended Amplifier Power [watts RMS] 500 SENSITIVITY [dB 1w/1m] 88 Box Top Depth (in, cm): 6 1/2, 16.4 Box Bottom Depth (in, cm): 10, 25.4 Box Height (in, cm): 15, 38.1 Box Width (in, cm): 21 1/2, 54.6 What's in the box? one loaded enclosure with one 10-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers

    Pre-Order Today!

    $299.99

  • 500W 10" Subwoofer Enclosure, 2Ω Configuration : Kicker 45VL7R102 500W 10" Subwoofer Enclosure, 2Ω Configuration : Kicker 45VL7R102 front side view.

    Kicker 45VL7R102 : 500W 10" Square Subwoofer Enclosure, 2Ω Configuration

    Pre-Order Today!

    10-Inch 500-Watt Loaded Square Subwoofer Enclosure, 2-Ohm Final Impedance With this L7R series 10" square sub box you get up to 20% more air movement compared to a round driver. This 500W loaded enclosure has an angled back, heavy duty internal bracing, thick MDF construction and black carpeting with a Kicker embroidered logo. This L7R subwoofer enclosure contains a single 10 Inch square driver with an RMS power rating of 500W @ 2Ω. Specifications Type single Woofer [in, cm] Solo-Baric L7R 10" Impedance [Ohms] 2 Recommended Amplifier Power [watts RMS] 500 SENSITIVITY [dB 1w/1m] 88.8 Box Top Depth (in, cm): 8 1/4, 21 Box Bottom Depth (in, cm): 13 7/8, 35.1 Box Height (in, cm): 13, 33 Box Width (in, cm): 24, 61 What's in the box? one loaded enclosure with one 10-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers

    Pre-Order Today!

    $349.99

  • 600W 12" Square Subwoofer Enclosure, 2Ω Configuration : Kicker 45VL7R122 600W 12" Square Subwoofer Enclosure, 2Ω Configuration : Kicker 45VL7R122 front side.

    Kicker 45VL7R122 : 600W 12" Square Subwoofer Enclosure, 2Ω Configuration

    Pre-Order Today!

    12-Inch 600-Watt Loaded Square Subwoofer Enclosure, 2-Ohm Final Impedance With this L7R series 12" square sub box you get up to 20% more air movement compared to a round driver. This 600W loaded enclosure has an angled back, heavy duty internal bracing, thick MDF construction and black carpeting with a Kicker embroidered logo. This L7R subwoofer enclosure contains a single 12 Inch square driver with an RMS power rating of 600W @ 2Ω. Specifications Type single Woofer [in, cm] Solo-Baric L7R 12" Impedance [Ohms] 2 Recommended Amplifier Power [watts RMS] 600 SENSITIVITY [dB 1w/1m] 94 Box Top Depth (in, cm): 8 1/2, 21.7 Box Bottom Depth (in, cm): 14 7/8, 37.8 Box Height (in, cm): 15, 38.1 Box Width (in, cm): 28, 71.1 What's in the box? one loaded enclosure with one 12-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers

    Pre-Order Today!

    $379.99

  • Kicker 46CWTB10 : Ten-Inch Loaded Marine Subwoofer Enclosure, 400-Watt, 2Ω or 4Ω Final Impedance 10" 400W Marine Subwoofer Enclosure, 2Ω or 4Ω : Kicker 46CWTB10 shown in the vertical mounting position.

    Kicker 46CWTB10 : 400W 10" Marine Subwoofer Enclosure, 2Ω or 4Ω

    Pre-Order Today!

    Ten-Inch Loaded Marine Subwoofer Enclosure, 400-Watt, 2Ω or 4Ω Final Impedance This weatherproof TB-Series subwoofer system by Kicker delivers serious bump from any corner of your trunk, behind your truck’s seat, or even in your boat or side-by-side. Surprisingly loud, the TB subs give you the bump you want without losing the space you need. Comes with a thick ABS tube construction, a flexible horizontal or vertical mounting system and spring-loaded speaker terminals. Sub-driver Grilles Included. The marine grade Kicker 46CWTB102 and 46CWTB104 10-Inch loaded subwoofer enclosures works best with 400-watts of amplified power. Specifications Type Reflex Size (in., cm) 10, 25 Impedance (ohms) 2 Power Watts (peak/RMS) 800/400 Sensitivity (dB 1w/1m) 85.7 Box Bottom Depth (in, cm) 16-9/16, 42.1 Box Height (in, cm) Vert. Mount: 17-1/16, 43.4; Horiz. Mount: 10-3/4, 27.3 Box Width (in, cm) 10-5/8, 27 What's in the Box: 1 - Enclosure assembly2 - Vertical mounting brackets1 - Horizontal mount base1 - Horizontal mount hook(retainer)1 - Horizontal mount plate(retaining clamp)7 - stainless steel M5 x 12mm button head screws for horizontal mount plate to base and mounting brackets to enclosure11 - nylon flat washers (to be used on all mounting fasteners)4 - stainless steel pan head phillips M4 x 25mm (for mount base to vehicle)1 - owner’s manual2 - Kicker stickers Kicker CWTB Subwoofer Enclosure Manual

    Pre-Order Today!

    $399.99

  • Kicker 46CWTB8 : Eight-Inch Loaded Marine Subwoofer Enclosure, 300-Watt, 2Ω or 4Ω Final Impedance 8" 300W Marine Subwoofer Enclosure, 2Ω or 4Ω : Kicker 46CWTB8 front view.

    Kicker 46CWTB8 : 8" 300W Marine Subwoofer Enclosure, 2Ω or 4Ω

    Pre-Order Today!

    Eight-Inch Loaded Marine Subwoofer Enclosure, 300-Watt, 2Ω or 4Ω Final Impedance This weatherproof TB-Series subwoofer system by Kicker delivers serious bump from any corner of your trunk, behind your truck’s seat, or even in your boat or side-by-side. Surprisingly loud, the TB subs give you the bump you want without losing the space you need. Comes with a thick ABS tube construction, a flexible horizontal or vertical mounting system and spring-loaded speaker terminals. Sub-driver Grilles Included. The marine grade Kicker 46CWTB82 and 46CWTB84 8-Inch loaded subwoofer enclosures works best with 300-watts of amplified power. Specifications Type Reflex Size (in., cm) 8, 20 Impedance (ohms) 2 Power Watts (peak/RMS) 600/300 Sensitivity (dB 1w/1m) 84.4 Box Bottom Depth (in, cm) 12-7/8, 32.8 Box Height (in, cm) Vert. Mount: 13-7/16, 34.1; Horiz. Mount: 8-5/8, 21.9 Box Width (in, cm) 8-1/2, 21.6 What's in the Box: 1 - Enclosure assembly2 - Vertical mounting brackets1 - Horizontal mount base1 - Horizontal mount hook(retainer)1 - Horizontal mount plate(retaining clamp)7 - stainless steel M5 x 12mm button head screws for horizontal mount plate to base and mounting brackets to enclosure11 - nylon flat washers (to be used on all mounting fasteners)4 - stainless steel pan head phillips M4 x 25mm (for mount base to vehicle)1 - owner’s manual2 - Kicker stickers Kicker CWTB Subwoofer Enclosure Manual

    Pre-Order Today!

    $299.99

  • 10" 500W Thin Subwoofer Enclosure, 2Ω or 4Ω : Kicker 46TL7T10 Kicker 46TL7T10 : 10-Inch Thin Loaded Subwoofer Enclosure, 500-Watts RMS, 2-Ohm or 4-Ohm Impedance, input side.

    Kicker 46TL7T10 : 500W 10" Thin Subwoofer Enclosure, 2Ω or 4Ω

    Pre-Order Today!

    10-Inch Thin Loaded Subwoofer Enclosure, 500-Watts RMS, 2-Ohm or 4-Ohm Impedance Barely seven inches deep, the Kicker TL7T 10-Inch thin subwoofer enclosure is perfect for big bass under or behind your seats. Genuine Kicker L7T subwoofer included Angled design for excellent fit Heavy internal bracing Single 2-Ohm terminal Easy to install and wire Thick black carpeting Rounded corners Embroidered Kicker logo Thick MDF construction Specifications Type single truck Woofer [in, cm] Solo-Baric L7T 10" 2Ω or 4 Ω Impedance [Ohms] 2 or 4 Recommended Amplifier Power [watts RMS] 500 SENSITIVITY [dB 1w/1m] 85.98 Box Top Depth (in, cm): 4-3/8, 11.3 Box Bottom Depth (in, cm): 7-1/4, 18.5 Box Height (in, cm): 12, 30.4 Box Width (in, cm): 20-1/4, 51.5 What's in the box? one loaded enclosure with one 10-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers Kicker L7T Subwoofer Enclosure Manual

    Pre-Order Today!

    $299.99

  • 12" 600W Thin Subwoofer Enclosure, 2Ω or 4Ω : Kicker 46TL7T12 Kicker 46TL7T12 : 12-Inch Thin Loaded Subwoofer Enclosure, 600-Watts RMS, 2-Ohm or 4-Ohm Impedance, input side.

    Kicker 46TL7T12 : 600W 12" Thin Subwoofer Enclosure, 2Ω or 4Ω

    Pre-Order Today!

    12-Inch Thin Loaded Subwoofer Enclosure, 600-Watts RMS, 2-Ohm or 4-Ohm Impedance Barely seven inches deep, the Kicker TL7T 10-Inch thin subwoofer enclosure is perfect for big bass under or behind your seats. Genuine Kicker L7T subwoofer included Angled design for excellent fit Heavy internal bracing Single 2-Ohm or 4-Ohm terminal Easy to install and wire Thick black carpeting Rounded corners Embroidered Kicker logo Thick MDF construction Specifications Woofer [in, cm] Solo-Baric L7T 12" 2 Ω or 4Ω Impedance [Ohms] 2 or 4 Recommended Amplifier Power [watts RMS] 600 SENSITIVITY [dB 1w/1m] 86.54 Box Top Depth (in, cm): 4-3/8, 11.2 Box Bottom Depth (in, cm): 7-3/4, 19.6 Box Height (in, cm): 13-3/4, 35 Box Width (in, cm): 21-1/2, 54.6 What's in the box? one loaded enclosure with one 12-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers Kicker L7T Subwoofer Enclosure Manual

    Pre-Order Today!

    $349.99

  • 8" 350W Thin Subwoofer Enclosure, 2Ω or 4Ω : Kicker 46TL7T8 Kicker 46TL7T82 : 8-Inch Thin Loaded Subwoofer Enclosure, 350-Watt RMS, 2-Ohm or 4-Ohm Impedance, input side.

    Kicker 46TL7T82 : 8" 350W Thin Subwoofer Enclosure, 2Ω or 4Ω

    Pre-Order Today!

    8-Inch Thin Loaded Subwoofer Enclosure, 350-Watt RMS, 2-Ohm or 4-Ohm Impedance Barely six inches deep, the KICKER TL7T 8-Inch Subwoofer Enclosure is perfect for big bass under or behind your seats. Genuine Kicker L7T subwoofer included Angled design for excellent fit Heavy internal bracing Single 2-Ohm or 4-Ohm terminal Easy to install and wire Thick black carpeting Rounded corners Embroidered Kicker logo Thick MDF construction Specifications Woofer [in, cm] Solo-Baric L7T 8" 2Ω or 4 Ω Impedance [Ohms] 2 or 4 Recommended Amplifier Power [watts RMS] 350 Sensitivity [dB 1w/1m] 84.835 Box Top Depth (in, cm): 3-5/8, 9.2 Box Bottom Depth (in, cm): 6-1/4, 16 Box Height (in, cm): 11-1/4, 28.5 Box Width (in, cm): 19-5/8, 50 What's in the box? one loaded enclosure with one 8-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers Kicker L7T Subwoofer Enclosure Manual

    Pre-Order Today!

    $269.99

  • Kicker 47QL7R12 : 12-Inch Quad-Loaded Subwoofer Enclosure, 2400-Watt, 2-Ohm Final Impedance. Kicker 47QL7R12 : 12-Inch Quad-Loaded Subwoofer Enclosure, 2400-Watt, 2-Ohm Final Impedance, port side.

    Kicker 47QL7R12 : 2400W 12" Subwoofer Enclosure

    Pre-Order Today!

    12-Inch Quad-Loaded Subwoofer Enclosure, 2400-Watt, 2-Ohm Final Impedance With 2,400-watts of RMS power handling, this computer-designed bass-head subwoofer system makes rattling your ride easier than ever! Four KICKER L7R 12-inch subs come pre-loaded in this enclosure. The port is flared perfectly and tuned to 31Hz for some serious bump - without the expense of a custom enclosure. This Kicker quad-sub box is made to take the pressure! Heavy, birch-veneer plywood construction and thick internal bracing keeps the enclosure stable, even under extreme SPL levels. Covered in durable black carpet and custom embroidered with the Kicker logo, the 47QL7R12 is pre-wired to a pair of two-Ohm terminals and 2400W of RMS power. Specifications Type QUAD Woofers/size [in, cm] 4 Solo-Baric L7R 12, 30 Impedance [Ohms] Dual 2-Ohm Terminals Recommended Amplifier Power (watts RMS) 2400 SENSITIVITY [dB 1w/1m] 98 Box Depth (in, mm): 28, 711 Box Height (in, mm): 20-1/4, 514 Box Width (in, mm): 35-7/8, 912 What's in the box? 1 47QL7R122, 1 enclosure hardware pack, 1 instruction manual, 2 KICKER stickers,1 47QL7R122, 1 massive sub enclosure, 1 enclosure mounting bracket kit,Customer Info Card w/link to product page (via QR Code).

    Pre-Order Today!

    $1,799.99


You have seen 48 out of 58 products

Login

Forgot your password?

Don't have an account yet?
Create account