At this present time our store location is open by appointment only.

300W RMS

Subs, Speakers and Electronics with an RMS Power Rating of 300-Watts

Subs, Speakers and Electronics with an RMS Power Rating of 300-Watts

The RMS rating of any speaker or subwoofer driver is the continuous power rating that the driver is designed to handle at a maximum volume rating. The RMS rating is one of two numbers to go by when pairing your speakers with an amplifier. As an example, a speaker with a 300-Watt, or 300W for short, RMS rating should be paired with a three-hundred-watt RMS amp. We usually recommend a power-plant to be over powered by 10 – 20% RMS so that the amplifier does not have to work at 100% capacity to get 100% efficiency from your speakers.

2 products

  • JL Audio CS110LG-TW1-2 : 10" Thin Subwoofer Enclosure - 300W RMS 2Ω JL Audio CS110LG-TW1-2 : 10" Thin Subwoofer Enclosure - 300W RMS 2Ω, side view.

    JL Audio CS110LG-TW1-2 : 10" Thin Subwoofer Enclosure, 300W RMS 2Ω

    Pre-Order Today!

    PowerWedge-Series 10-Inch 300-Watt Enclosed Subwoofer System, 2Ω Sealed Enclosure In this low-profile PowerWedge™ subwoofer system, JL harnesses the performance and insanely small box requirements of the TW1 subwoofer driver to deliver amazing sub-bass from an enclosure that is only 5.56 in. (141 mm) deep. This low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW1 and has been fine-tuned through extensive real-world listening. The PowerWedge™ subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the top surface of the enclosure. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 75 - 300WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 2 Ω Enclosure Type Sealed Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 15 in / 381 mm External Height (H) 11.75 in / 298 mm External Depth (D1) 5.563 in / 141 mm Net Weight 17.42 lb / 7.90 kg JL Audio CS110LG-TW1-2 Brochure

    Pre-Order Today!

    $399.99

  • Kicker 48TCWRT82 : 300W Dual 8" Thin Subwoofer Enclosure, 2Ω Configuration Kicker 48TCWRT82 : 300W Dual 8" Thin Subwoofer Enclosure, 2Ω Configuration, left side.

    Kicker 48TCWRT82 : 300W Dual 8" Thin Subwoofer Enclosure, 2Ω Configuration

    Pre-Order Today!

    8-Inch 300-Watt Loaded Dual Thin Subwoofer Enclosure, 2-Ohm Final Impedance The CompRT Thin Profile 8-Inch subwoofer enclosure comes loaded with a Reflex subwoofer and RT sub, then carpeted and loaded with a single 2Ω terminal. Covered in sleek black carpeting and built with stout MDF construction & rounded corners, these tough enclosures take plenty of power, yet fit nearly anywhere. The Kicker 43TCWRT82 enclosure works best with 300 watts of RMS power. Specifications TYPE: thin-profile NO. OF WOOFERS/SIZE (in, cm): 8, 20 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 SENSITIVITY (dB 1w/1m): 85.5 BOX TOP DEPTH (in, cm): 3 9/16, 9 BOX BOTTOM DEPTH (in, cm): 6 7/16, 16.4 BOX HEIGHT (in, cm): 11 13/16, 39 BOX WIDTH (in, cm): 19-5/16, 49 Kicker CompRT Subwoofer Enclosure Manual

    Pre-Order Today!

    $239.99

Login

Forgot your password?

Don't have an account yet?
Create account