At this present time our store location is open by appointment only.

300W RMS

Subs, Speakers and Electronics with an RMS Power Rating of 300-Watts

Subs, Speakers and Electronics with an RMS Power Rating of 300-Watts

The RMS rating of any speaker or subwoofer driver is the continuous power rating that the driver is designed to handle at a maximum volume rating. The RMS rating is one of two numbers to go by when pairing your speakers with an amplifier. As an example, a speaker with a 300-Watt, or 300W for short, RMS rating should be paired with a three-hundred-watt RMS amp. We usually recommend a power-plant to be over powered by 10 – 20% RMS so that the amplifier does not have to work at 100% capacity to get 100% efficiency from your speakers.

2 products

  • JL Audio CS110LG-TW1-2 : 10" Thin Subwoofer Enclosure - 300W RMS 2Ω JL Audio CS110LG-TW1-2 : 10" Thin Subwoofer Enclosure - 300W RMS 2Ω, side view.

    JL Audio CS110LG-TW1-2 : 10" Thin Subwoofer Enclosure, 300W RMS 2Ω

    Pre-Order Today!

    PowerWedge-Series 10-Inch 300-Watt Enclosed Subwoofer System, 2Ω Sealed Enclosure In this low-profile PowerWedge™ subwoofer system, JL harnesses the performance and insanely small box requirements of the TW1 subwoofer driver to deliver amazing sub-bass from an enclosure that is only 5.56 in. (141 mm) deep. This low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW1 and has been fine-tuned through extensive real-world listening. The PowerWedge™ subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the top surface of the enclosure. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 75 - 300WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 2 Ω Enclosure Type Sealed Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 15 in / 381 mm External Height (H) 11.75 in / 298 mm External Depth (D1) 5.563 in / 141 mm Net Weight 17.42 lb / 7.90 kg JL Audio CS110LG-TW1-2 Brochure

    Pre-Order Today!

    $399.99

  • 300W 10" Thin Subwoofer Enclosure, 2Ω Configuration : Kicker 44TCWC102 300W 10" Thin Subwoofer Enclosure, 2Ω Configuration : Kicker 44TCWC102 front side view.

    Kicker 44TCWC10 : 300W 10" Thin Subwoofer Enclosure, 2Ω or 4Ω Configuration

    Pre-Order Today!

    10-Inch 300-Watt Thin Subwoofer Enclosure, 2-Ohm or 4-Ohm Final Impedance This CompC 10" thin loaded loaded sub box is custom-sized to optimize subwoofer performance. This enclosure can fit under or behind a rear seat, has heavy MDF construction, is covered in black carpet with yellow embroidery, and comes with spring loaded speaker terminals for an easy connection of your subwoofer wire.  These thin 44TCWC102 and 44TCWC104 10-inch enclosure works best with 300 watts of RMS amplified power. Specifications Subwoofer (in, cm) 10, 25 Impedance (Ohms) 2, 4 Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 Sensitivity (dB 1w/1m) 93.8 Box Top Depth (in, cm) 4,10.2 Box Bottom Depth (in, cm) 7 5/8, 19.4 Box Height (in, cm) 15, 38.1 Box Width (in, cm) 21 1/2, 54.6 Kicker CompC Subwoofer Enclosure Manual

    Pre-Order Today!

    $179.99

Login

Forgot your password?

Don't have an account yet?
Create account