Amplified

Add-On Amplifier OEM Integration Line Converter with DSP for Select 2006-2020 BMW and MINI Vehicles Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP. Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do. Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall. Designed for non-amplified models Package includes the AXDSP-L and vehicle-specific T-harness 15-band graphic EQ or 5-band Parametric EQ Selectable high pass, low pass, or bandpass filters on each channel 4 inputs and 6 individually assignable outputs Independent equalization on each of the 6 outputs Selectable slope (12, 24, 36, or 48db per octave) Each channel can be delayed independently for up to 10 ms Easy behind the radio installation in most applications Can be used with OE and aftermarket radios Clipping detection and limiting circuits Internal header port for adding interface modules Bass knob included Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level Settings adjusted wirelessly in a smart device application (tablet or mobile phone) Read, write, and store configurations for future recall Password-protect feature is available in the mobile app Applications BMW 1 Series Base amp (non Fiber) 2008-2020 2 Series Base amp (non Fiber) 2014-2020 3 Series Base amp (non Fiber) 2006-2018 4 Series Base amp (non Fiber) 2014-2020 5 Series Base amp (non Fiber) 2010-2016 6 Series Base amp (non Fiber) 2010-2017 7 Series Base amp (non Fiber) 2010-2015 M3 Base amp (non Fiber) 2007-2013 X1 Base amp (non Fiber) 2015-2020 X3 Base amp (non Fiber) 2010-2018 X4 Base amp (non Fiber) 2015-2018 X5 Base amp (non Fiber) 2014-2018 X6 Base amp (non Fiber) 2015-2019 MINI Cooper 2007-2015 Axxess AXDSPL-BM1 Manual

Read more less

Add-On Amplifier OEM Integration Line Converter with DSP for Select 2011-2020 Chrysler and Dodge Vehicles Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP. Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do. Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall. Designed for amplified and non-amplified models Package includes the AXDSP-L and vehicle-specific T-harness 15-band graphic EQ or 5-band Parametric EQ Selectable high pass, low pass, or bandpass filters on each channel 4 inputs and 6 individually assignable outputs Independent equalization on each of the 6 outputs Selectable slope (12, 24, 36, or 48db per octave) Each channel can be delayed independently for up to 10 ms Easy behind the radio installation in most applications Can be used with OE and aftermarket radios Clipping detection and limiting circuits Internal header port for adding interface modules Bass knob included Retains OE voice prompts (Uconnect®) Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level Settings adjusted wirelessly in a smart device application (tablet or mobile phone) Read, write, and store configurations for future recall Password-protect feature is available in the mobile app Applications CHRYSLER 300 2011 2014 DODGE Charger 2011 2014 Journey 2011 2020 Axxess AXDSPL-CH3 Manual

Read more less

Add-On Amplifier OEM Integration Line Converter with DSP for Select 2007-2020 Chrysler, Dodge, Jeep and RAM Vehicles Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP. Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do. Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall. Designed for amplified and non-amplified models Package includes the AXDSP-L and vehicle-specific T-harness 15-band graphic EQ or 5-band Parametric EQ Selectable high pass, low pass, or bandpass filters on each channel 4 inputs and 6 individually assignable outputs Independent equalization on each of the 6 outputs Selectable slope (12, 24, 36, or 48db per octave) Each channel can be delayed independently for up to 10 ms Easy behind the radio installation in most applications Can be used with OE and aftermarket radios Clipping detection and limiting circuits Internal header port for adding interface modules Bass knob included Retains OE voice prompts (Uconnect®) Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level Settings adjusted wirelessly in a smart device application (tablet or mobile phone) Read, write, and store configurations for future recall Applications CHRYSLER Town & Country 2008-2020 DODGE Caravan/Grand Caravan 2008-2020 Dart 2013-2016 Nitro 2007-2011 JEEP Grand Cherokee 2011-2013 Liberty 2008-2012 Wrangler (JK) 2007-2017 RAM 1500 2010-2012 Axxess AXDSPL-CH4 Manual

Read more less

Add-On Amplifier OEM Integration Line Converter with DSP for Select 2013-UP Chrysler, Dodge, Fiat, Jeep and RAM Vehicles Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP. Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do. Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall. Designed for amplified and non-amplified models Package includes the AXDSP-L and vehicle-specific T-harness 15-band graphic EQ or 5-band Parametric EQ Selectable high pass, low pass, or bandpass filters on each channel 4 inputs and 6 individually assignable outputs Independent equalization on each of the 6 outputs Selectable slope (12, 24, 36, or 48db per octave) Each channel can be delayed independently for up to 10 ms Easy behind the radio installation in most applications Can be used with OE and aftermarket radios Clipping detection and limiting circuits Internal header port for adding interface modules Bass knob included Retains OE voice prompts (Uconnect®) Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level Settings adjusted wirelessly in a smart device application (tablet or mobile phone) Read, write, and store configurations for future recall Password-protect feature is available in the mobile app Applications CHRYSLER 200 2015-2017 300 2015-2023 Pacifica 2017-2020 Pacifica without separate screen 2021-2022 DODGE Challenger 2015-2023 Charger 2015-2023 Durango 2014-2020 Durango without separate screen 2021-2022 Viper 2015-2017 FIAT 500X 2015-2017 JEEP Cherokee 2014-2020 Compass 2017-2021 Gladiator 2020-2023 Grand Cherokee 2014-2022 Renegade 2015-2019 Wrangler (JL) 2018-2023 RAM 1500/2500/3500 2013-2018 1500/2500/3500 2019-2021 Axxess AXDSPL-CH5 Manual

Read more less

Add-On Amplifier OEM Integration Line Converter with DSP for Select 2006-2014 Ford Vehicles Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP. Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do. Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall. Designed for amplified and non-amplified models Package includes the AXDSP-L and vehicle-specific T-harness 15-band graphic EQ or 5-band Parametric EQ Selectable high pass, low pass, or bandpass filters on each channel 4 inputs and 6 individually assignable outputs Independent equalization on each of the 6 outputs Selectable slope (12, 24, 36, or 48db per octave) Each channel can be delayed independently for up to 10 ms Easy behind the radio installation in most applications Can be used with OE and aftermarket radios Clipping detection and limiting circuits Internal header port for adding interface modules Bass knob included Retains OE voice prompts (Sync®) Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level Settings adjusted wirelessly in a smart device application (tablet or mobile phone) Read, write, and store configurations for future recall Password-protect feature is available in the mobile app Applications FORD Edge 2007-2010 Escape 2008-2012 Expedition Non-Sony 2007-2014 F-150 2006-2013 Flex 2009-2012 Focus 2008-2011 Fusion 2006-2012 Mustang 2006-2014 Taurus 2008-2011 Axxess AXDSPL-FD1 Manual

Read more less

Add-On Amplifier OEM Integration Line Converter with DSP for Select 2011-UP Ford Vehicles Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP. Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do. Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall. Designed for amplified and non-amplified models Package includes the AXDSP-L and vehicle-specific T-harness 15-band graphic EQ or 5-band Parametric EQ Selectable high pass, low pass, or bandpass filters on each channel 4 inputs and 6 individually assignable outputs Independent equalization on each of the 6 outputs Selectable slope (12, 24, 36, or 48db per octave) Each channel can be delayed independently for up to 10 ms Easy behind the radio installation in most applications Can be used with OE and aftermarket radios Clipping detection and limiting circuits Internal header port for adding interface modules Bass knob included Retains OE voice prompts (Sync®) Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level Settings adjusted wirelessly in a smart device application (tablet or mobile phone) Read, write, and store configurations for future recall Password-protect feature is available in the mobile app Applications FORD CMAX non-amplified 2013-2017 EcoSport 2016-2019 Edge Sony or Non-amplified 2011-2018 Edge 2019-2023 Escape 2015-2019 Expedition Sony or Non-amplified 2015-2017 Expedition 2018-2022 Explorer Sony or Non-amplified 2011-2019 F-150 Sony or Non-amplified 2014-2016 F-150 2017-2020 Fiesta 2011-2019 Flex 2013-2019 Focus 2012-2019 Fusion 2013-2020 Mustang 2015-2023 Ranger 2019-2023 Super Duty Sony or Non-amplified 2019-2020 Axxess AXDSPL-FD2 Manual

Read more less

Amplifier Add-On OEM Line-Converter & T-Harness for Select 2011-2020 Hyundai and KIA Vehicles Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness along with an amplifier bypass harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP. Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do. Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall. Designed for S/PDIF amplified models Package includes the AXDSP-L and vehicle-specific T-harness 15-band graphic EQ or 5-band Parametric EQ Selectable high pass, low pass, or bandpass filters on each channel 4 inputs and 6 individually assignable outputs Independent equalization on each of the 6 outputs Selectable slope (12, 24, 36, or 48db per octave) Each channel can be delayed independently for up to 10 ms Easy behind the radio installation in most applications Can be used with OE and aftermarket radios Clipping detection and limiting circuits Internal header port for adding interface modules Bass knob included Retains OE voice prompts (Blue Link®/UVO) with adjustable level Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level Retains the ability to work with S/PDIF digitally controlled amplified systems Factory amplifier does NOT need to be retained Wiring to be completed at the amplifier location Settings adjusted wirelessly in a smart device application (tablet or mobile phone) Read, write, and store configurations for future recall Password-protect feature is available in the mobile app Applications HYUNDAI Azera Amplified 2012-2017 Elantra Amplified 2011-2016 Equus 2011-2016 Sonata 2011-2017 Sonata Amplified 2018-2020 Tucson Amplified 2011-2019 Veloster Amplified 2012-2017 KIA Cadenza Amplified 2014-2016 Optima Amplified 2011-2018 Soul Amplified 2012-2016 Sportage Amplified 2011-2016 Axxess AXDSPL-HK2 Manual

Read more less

Amplifier Add-On OEM Line-Converter & T-Harness for Select 2013-2020 SPDIF-Amplified Hyundai and KIA Vehicles Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness along with an amplifier bypass harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP. Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do. Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall. Designed for S/PDIF amplified models Package includes the AXDSP-L and vehicle-specific T-harness 15-band graphic EQ or 5-band Parametric EQ Selectable high pass, low pass, or bandpass filters on each channel 4 inputs and 6 individually assignable outputs Independent equalization on each of the 6 outputs Selectable slope (12, 24, 36, or 48db per octave) Each channel can be delayed independently for up to 10 ms Easy behind the radio installation in most applications Can be used with OE and aftermarket radios Clipping detection and limiting circuits Internal header port for adding interface modules Bass knob included Retains OE voice prompts (Blue Link®/UVO) with adjustable level Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level Retains the ability to work with S/PDIF digitally controlled amplified systems Factory amplifier does NOT need to be retained Wiring to be completed at the amplifier location Settings adjusted wirelessly in a smart device application (tablet or mobile phone) Read, write, and store configurations for future recall Password-protect feature is available in the mobile app Applications HYUNDAI Elantra Amplified 2017-2020 Elantra GT Amplified 2018-2020 Kona Amplified 2018-2020 Santa Fe Amplified 2013-2020 KIA Cadenza Amplified 2017-2020 Forte Amplified 2019-2020 Niro (EV) Navigation 2019-2020 Niro (Hybrid Electrical) Navigation 2020-2020 Niro (Plug-In Hybrid) Navigation 2018-2020 Optima Amplified 2019-2020 Sorento Amplified 2019-2020 Soul Amplified 2017-2020 Soul EV Amplified 2020-2020 Sportage Amplified 2017-2020 Axxess AXDSPL-HK4 Manual

Read more less

Add-On Amplifier OEM Integration Line Converter with DSP and Factory-Amplifier Bypass-Harness for Select 2019-UP Factory Amplified and Non-Amplified GM Vehicles The AXDSP-X offers installers a fast, cost-effective solution for improving the sound system with 10 individually assigned output channels, the ability to password-protect your settings, and an easy-to-use smartphone app. It has an onboard digital amplifier turn-on capability with built-in technology to retain many of the vehicle features commonly lost when installing a DSP. Complete Tuning ControlInstallers will have full control to fine-tune each of the 10 channel outputs individually, controlled wirelessly via a free app available for smartphones and tablets. The app makes tuning easy with a 31-band graphic EQ and up to 10ms time delay for each channel, with independent high pass, low pass, and bandpass filters. Retain Features with a Built-in InterfaceUtilizing Axxess’s data interface technology, the AXDSP-X goes beyond what a traditional DSP can do and retains many of the features commonly lost when upgrading a sound system. Voice prompts, parking sensor chimes, and other factory chimes are retained with an adjustable volume control that many traditional DSPs cannot offer. This is a cost-effective solution for customers who want to retain their factory radio and improve their vehicle sound quality, while still retaining systems like SYNC or OnStar®. One Solution, Many ApplicationsThe AXDSP-X solution already works with a wide range of vehicle applications and systems, including OE or aftermarket radios, and fixed-level analog and/or digitally controlled amplified systems, in addition to non-amplified vehicles that do not have chimes. The AXDSP-X works with all the existing DSP T-harnesses and still offers the same easy installation behind the radio. See the AXDSP-X application chart for up-to-date vehicle-specific information. Designed for Ethernet amplifiers Ethernet data interface included AXDSP-X included Includes an amp bypass harness Retains factory chimes, including parking sensor chimes Retains OnStar voice prompts All chimes/voice prompts go through the aftermarket amp Adjustable chime level Micro “B” USB updatable Applications CADILLAC XT4 Bose 2019-2023 CHEVROLET Blazer IOT or IOU & Bose 2019-2023 Camaro IOS or IOT & Bose 2019-2023 Cheyenne IOS or IOT & Bose 2019-2021 Colorado (New Style) IOS or IOT & Bose 2019-2022 Corvette 2020-2023 Equinox IOS or IOT & Bose 2019-2023 Malibu IOU or IOS & Bose 2019-2022 Silverado Bose 2022-2024 Silverado IOS or IOT & Bose 2019-2021 Suburban Bose 2021-2023 Tahoe Bose 2021-2024 Traverse IOS or IOT & Bose 2020-2022 GMC Acadia IOU & Bose 2020-2022 Acadia IOU & Bose 2019-2019 Canyon IOS or IOT & Bose 2019-2022 Sierra Bose 2019-2024 Terrain IOS, IOT or IOU & Bose 2019-2022 Yukon Bose 2021-2024 Axxess AXDSPX-ETH1 Installation Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2007-2018 Amplified Chrysler, Dodge, Jeep and RAM Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features. Benefits Simplifies amplifier installation It prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it, thanks to the original amplifier's retention. Enables the addition of a subwoofer system to the original sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid and treble center frequency selection Retains uConnect, Bluetooth audio, and all warning chimes Plug & play installation Sublevel controller Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module 22-pin harness (MS-CAN) Bass knob Knob harness Manual Also available for fast, easy install: APH-CH01 harness (sold separately) Applications This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer. CHRYSLER TOWN & COUNTRY ALL TRIM LEVELS 2008-2016 DODGE CHALLENGER ALL TRIM LEVELS 2008-2014 CHARGER ALL TRIM LEVELS 2008-2010 DURANGO ALL TRIM LEVELS 2009, 2011-2013 GRAND CARAVAN ALL TRIM LEVELS 2008-2018 RAM TRUCK ALL TRIM LEVELS 2009-2012 JEEP GRAND CHEROKEE ALL TRIM LEVELS 2008-2013 WRANGLER ALL TRIM LEVELS 2007-2017 WRANGLER JK 2018 WRANGLER UNLIMITED ALL TRIM LEVELS 2007-2017 WRANGLER UNLIMITED JK 2018 RAM RAM TRUCK ALL TRIM LEVELS 2010-2012 Pac Audio AP4-CH21 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2011-2016 Amplified Chrysler, Dodge and Maserati Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features. Benefits Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Enables the addition of a subwoofer system to the original sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid and treble center frequency selection Retains uConnect, Bluetooth audio, and all warning chimes Plug & play installation Sublevel controller Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module 22-pin harness (Dual MS-CAN) Bass knob Knob harness Manual Also available for fast, easy install: APH-CH01 harness (sold separately) Applications This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer. CHRYSLER 300 ALL TRIM LEVELS 2011-2014 DODGE CHARGER ALL TRIM LEVELS 2011-2014 JOURNEY ALL TRIM LEVELS 2011-2015 MASERATI GHIBLI ALL TRIM LEVELS 2015 QUATTROPORTE ALL TRIM LEVELS 2014-2016 Pac Audio AP4-CH31 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2013-UP Chrysler, Dodge, Jeep, Maserati and RAM Vehicles This latest version of the Pac-Audio AmpPRO simplifies the installation of upgraded amplifiers in select non-amplified and amplified sound systems  With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features. Benefits Simplifies amplifier installation Prevents need for summing and DSP devices Provides factory sound system upgrade solution Provides flat audio output for a solid audio foundation Features Can be used to upgrade the entire sound system or just part of it thanks to retention of the original amplifier Enables the addition of a subwoofer to an amplified sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Customized OE bass, mid and treble center frequency selection Retains uConnect, Bluetooth audio, Navigation prompts, and all warning chimes Plug-n-Play installation Sub level controller Optional TOSLINK optical output (APA-TOS1 sold separately)  Includes AmpPRO module 52-pin harness (MS-CAN) Bass knob with harness Manual Also available for fast, easy install: APH-CH01 harness (sold separately) Select non-amplified vehicles are equipped with an ANC system that requires bypass.  Plug-n-Play bypass harness: ANC-CH01  Applications Compatible with both amplified and non-amplified factory systems. Jeep Cherokee, Chrysler 200, and Maserati: These vehicles must be equipped with a factory amplifier as the AP4 cannot reprogram the factory radio to think that an amplifier is present. When installing into any of the following vehicles, the APHCH42 is required (sold separately): CHRYSLER 200 ALL TRIM LEVELS 2015-2017 300 ALL TRIM LEVELS 2015-2022 PACIFICA ALL TRIM LEVELS 2017-2022 DODGE CHALLENGER ALL TRIM LEVELS 2015-2022 CHARGER ALL TRIM LEVELS 2015-2022 DURANGO ALL TRIM LEVELS 2014-2020 DURANGO ALL TRIM LEVELS w/10.1" Screen 2021 DURANGO ALL TRIM LEVELS w/8.4" Screen 2021 RAM TRUCK ALL TRIM LEVELS 2013-2021 RAM TRUCK NON-CLASSIC 2022 JEEP CHEROKEE ALL TRIM LEVELS 2015-2021 GLADIATOR ALL TRIM LEVELS 2020-2022 GRAND CHEROKEE ALL TRIM LEVELS 2014-2020 GRAND CHEROKEE WK 2021-2023 WRANGLER JL 2018-2023 WRANGLER 4XE 2021-2022 WRANGLER ALL TRIM LEVELS 2024 WRANGLER UNLIMITED JL 2018-2023 WRANGLER UNLIMITED ALL TRIM LEVELS 2024 MASERATI LEVANTE ALL TRIM LEVELS 2018 QUATTROPORTE ALL TRIM LEVELS 2017 RAM RAM TRUCK ALL TRIM LEVELS 2013-2021 RAM TRUCK NON-CLASSIC 2022 Pac Audio AP4-CH41 R.2 ManualPac Audio AP4-CH41 ANC and Amplifier LocationsPac Audio AP4-CH41 R.2 Technical Bulletin

Read more less

Add-On Amplifier OEM Integration Interface for Select 2007-2014 Amplified Ford and Lincoln Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features. Benefits Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Enables the addition of a subwoofer system to the original sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid and treble center frequency selection Retains Sync, Bluetooth audio, and all warning chimes Plug & play installation Sublevel controller Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module 24-pin (MS-CAN) Bass knob Knob harness Manual Also available for fast, easy install: APH-FD01 harness (sold separately) Applications This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system. If you are unsure of your vehicle having an amplified system, please contact an authorized Ford service center for further clarification. FORD F-150 ALL TRIM LEVELS 2009-2012 FLEX ALL TRIM LEVELS 2009-2012 FUSION ALL TRIM LEVELS 2010-2012 TAURUS ALL TRIM LEVELS 2010-2012 LINCOLN MKS ALL TRIM LEVELS 2009-2012 MKT ALL TRIM LEVELS 2010-2012 MKX ALL TRIM LEVELS 2007-2010 MKZ ALL TRIM LEVELS 2007-2012 NAVIGATOR ALL TRIM LEVELS 2007-2014 Pac Audio AP4-FD11 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2011-2020 Amplified Ford and Lincoln Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features. Benefits Simplifies amplifier installation Prevents need for summing and DSP devices Provides factory sound system upgrade solution Features Can be used to upgrade the entire sound system or just part of it thanks to retention of original amplifier Enables the addition of a subwoofer system to the original sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid and treble center frequency selection Retains Sync, Bluetooth audio and all warning chimes Plug & play installation Sub level controller Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module 24-pin and 54-pin harness (MS CAN) (Dual MS CAN) Bass knob Knob harness Manual Also available for fast easy install: APH-FD01 harness (sold separately) Applications This product is compatible with data-bus controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers or the subwoofer to confirm that the vehicle has a compatible amplified system. If you are unsure of your vehicle having an amplified system please contact an authorized Ford service center for further clarification. 2018-2019 Super Duty Trucks can have either Sony or B&O systems to be compatible. 2019+ Mustang must have B&O System to be compatible. If the amp looks like the one pictured, it is compatible. The amp can be found in the driver's kick panel. If the system is amplified and not badged then the AP4 is not compatible as this is a completely analog system.  FORD EDGE ALL TRIM LEVELS 2015-2017 ESCAPE ALL TRIM LEVELS 2016 EXPEDITION ALL TRIM LEVELS 2015-2017 EXPLORER ALL TRIM LEVELS 2011-2018 F-150 ALL TRIM LEVELS 2013-2017 F-250 ALL TRIM LEVELS 2013-2019 F-350 ALL TRIM LEVELS 2013-2019 F-450 ALL TRIM LEVELS 2013-2019 F-550 ALL TRIM LEVELS 2013-2019 FOCUS ALL TRIM LEVELS 2012-2017 FUSION ALL TRIM LEVELS 2013-2016 MUSTANG ALL TRIM LEVELS 2019-2020 TAURUS ALL TRIM LEVELS 2013-2015 Pac Audio AP4-FD21 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2018-UP Amplified Ford  Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features. Benefits Simplifies amplifier installation Prevents need for summing and DSP devices Provides factory sound system upgrade solution Features Simplifies amplifier installation in data-bus controlled factory sound systems Provides variable volume, control, fade, balance, bass, mid, and treble audio settings Retains warning chimes, navigation prompts, Bluetooth®, and telematics audio (if equipped) Front, rear, and sub preamp outputs (5V RMS) Plug-and-play installation with factory-matched harness Sub level controller included Optical output included Applications Vehicle must be equipped with factory B&O system to be compatible Factory amplifier must be removed from vehicle when installing this interface FORD BRONCO ALL TRIM LEVELS 2021-2023 BRONCO SPORT ALL TRIM LEVELS 2021 ECO SPORT ALL TRIM LEVELS 2021 EDGE ALL TRIM LEVELS 2019-2022 ESCAPE ALL TRIM LEVELS 2021-2022 EXPEDITION ALL TRIM LEVELS 2018-2020 EXPLORER ALL TRIM LEVELS 2020-2023 F-150 ALL TRIM LEVELS 2018-2023 F-250 ALL TRIM LEVELS 2020-2023 F-350 ALL TRIM LEVELS 2020-2023 F-450 ALL TRIM LEVELS 2020 LIGHTNING ALL TRIM LEVELS 2022 MAVERICK ALL TRIM LEVELS 2022 MUSTANG MACH E ALL TRIM LEVELS 2021 RANGER ALL TRIM LEVELS 2020-2023 Pac Audio AP4-FD31 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2002-2015 Amplified Lexus and Toyota Vehicles Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time! Benefits Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Enables the addition of a subwoofer system to the original sound system Upgrade solution for factory, fixed level, data-bus controlled sound systems Everything you need in one box to install your choice of aftermarket amplifier(s) The time-saving design prevents the need for summing and audio correction devices. Variable volume, fade, balance, bass, mid, and treble audio settings Retains Bluetooth, navigation, safety system, and all warning chimes Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid, and treble center frequency selection Plug-n-play installation with two 20-pin connectors (IE Bus) Remote sub level controller included Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module Harness (IE Bus) Bass knob Knob harness Manual Applications Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. See manual for details. Toyota vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital. Lexus vehicles must be equipped with a center channel and a subwoofer in order for the AP4-TY11 to be compatible: Between 2012-2015 Toyota used two different styles of connectors. In order for the AP4-TY11 to be compatible, the radio must have the 20-pin BHA8113 style connector. Vehicles equipped with the 10 / 6-pin BHA1761 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference LEXUS CT 200H ALL TRIM LEVELS For AmpPRO: Without Navigation 2011-2013 ES 300 ALL TRIM LEVELS For AmpPRO: With Double DIN Radio 2002-2003 ES 300H ALL TRIM LEVELS For AmpPRO: Without Navigation 2013-2014 ES 330 ALL TRIM LEVELS For AmpPRO: With Double DIN Radio 2004-2006 ES 350 ALL TRIM LEVELS — 2007-2009 ES 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2014 GX 460 ALL TRIM LEVELS For AmpPRO: Without Navigation 2009-2013 GX 470 ALL TRIM LEVELS — 2004-2009 HS 250H ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2012 IS 250 ALL TRIM LEVELS — 2006-2009 IS 250 ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2013 IS 350 ALL TRIM LEVELS — 2006-2009 IS 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2013 IS F ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2012 LS 430 ALL TRIM LEVELS — 2001-2006 RX 330 ALL TRIM LEVELS — 2004-2006 RX 350 ALL TRIM LEVELS — 2007-2009 RX 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2015 RX 400H ALL TRIM LEVELS — 2006-2008 RX 450H ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2015 TOYOTA 4RUNNER ALL TRIM LEVELS — 2003-2013 AVALON ALL TRIM LEVELS — 2005-2012 AVALON ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2013-2014 CAMRY ALL TRIM LEVELS — 2007-2011 CAMRY ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2012-2014 COROLLA ALL TRIM LEVELS — 2005-2011 FJ CRUISER ALL TRIM LEVELS — 2011-2014 HIGHLANDER ALL TRIM LEVELS — 2008-2013 LAND CRUISER ALL TRIM LEVELS — 2008 PRIUS ALL TRIM LEVELS — 2004-2011 PRIUS ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2012-2015 RAV4 ALL TRIM LEVELS — 2004-2013 RAV4 ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2014 SEQUOIA ALL TRIM LEVELS — 2005-2012 SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style radio harness 2013 SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2014 SIENNA ALL TRIM LEVELS — 2004-2014 TACOMA ALL TRIM LEVELS — 2005-2013 TUNDRA ALL TRIM LEVELS — 2005-2013 VENZA ALL TRIM LEVELS — 2009-2012 VENZA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2013-2014 Pac Audio AP4-TY11 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2012-2019 Amplified Lexus and Toyota Vehicles Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time! Benefits Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Enables the addition of a subwoofer system to the original sound system Upgrade solution for factory, fixed level, data-bus controlled sound systems Everything you need in one box to install your choice of aftermarket amplifier(s) The time-saving design prevents the need for summing and audio correction devices. Variable volume, fade, balance, bass, mid, and treble audio settings Retains Bluetooth, navigation, safety system, and all warning chimes Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid, and treble center frequency selection Plug-n-play installation with two 20-pin connectors (IE Bus) Remote sub level controller included Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module Harness (IE Bus) Bass knob Knob harness Manual Applications Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. See manual for details. Vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital. Lexus vehicles equipped with the Mark Levinson system are not compatible. Lexus vehicles equipped with navigation are not compatible. Lexus CT200h: Must be equipped with a center channel and a subwoofer Between 2012-2015 Toyota used two different styles of connectors. In order for the AP4-TY12 to be compatible, the radio must have the 10 / 6-pin BHA1761 style connector. Vehicles equipped with the 20-pin BHA8113 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference.   LEXUS CT 200H ALL TRIM LEVELS For AmpPRO: Without Navigation 2014-2017 ES 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 GX 460 ALL TRIM LEVELS For AmpPRO: Without Navigation 2014-2017 IS 200T ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 IS 250 ALL TRIM LEVELS For AmpPRO: Without Navigation 2014-2015 IS 300 ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 NX 200T ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 NX 300H ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 RC 200T ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 RC 300 ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 RC 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 RX 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 TOYOTA 4RUNNER ALL TRIM LEVELS — 2014-2018 AVALON ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2013-2014 AVALON ALL TRIM LEVELS — 2015-2018 CAMRY ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2012-2014 CAMRY ALL TRIM LEVELS — 2015-2017 HIGHLANDER ALL TRIM LEVELS — 2014-2018 PRIUS ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2012-2015 PRIUS ALL TRIM LEVELS — 2016-2017 RAV4 ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2014 RAV4 ALL TRIM LEVELS — 2015-2018 SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness 2013 SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2014 SEQUOIA ALL TRIM LEVELS — 2015-2018 SIENNA ALL TRIM LEVELS — 2015-2017 TACOMA ALL TRIM LEVELS — 2014-2018 TUNDRA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness 2014-2015 TUNDRA ALL TRIM LEVELS — 2016-2019 VENZA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2013-2014 VENZA ALL TRIM LEVELS — 2015-2016 Pac Audio AP4-TY12 ManualPac Audio AP4-TY12 Technical Bulletin

Read more less

Add-On Amplifier OEM Integration Interface for Select 2018-2021 Amplified Lexus and Toyota Vehicles Quickly and seamlessly add aftermarket amplifier(s) for improved audio performance while retaining the factory radio. AmpPRO is a Plug-n-Play solution that plugs into the factory radio harness and provides Front/Rear/Sub RCA outputs (5 Volt RMS) to connect to your aftermarket amplifiers. The AmpPRO design avoids the disappointing results and hassle of interfacing after the factory amplifier.  The harness connects to the radio for easier installation. Provides variable volume, fade, and balance Provides bass, mid and treble audio settings Retains warning chimes and navigation prompts Retains Bluetooth and telematic audio (if equipped) Front/Rear/Sub RCA outputs (5 Volt RMS) Includes sub level controller Optional TOSLINK optical output (APA-TOS1) sold separately. Optional speaker connection harness (APH-TY02) sold separately. Applications Lexus ES250, ES350, and NX300: Only compatible in models equipped with the 8" screen Lexus RX350 and RX450: Not compatible in models equipped with navigation In 2018+ models Toyota used three different styles of connectors on the factory radios. In order for the AP4-TY13 to be compatible, the radio must have the 28 / 10-pin new Toyota style connector. Vehicles equipped with the 20-pin BHA8113  or the 10 / 6 pin BHA1761 style connectors are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference. LEXUS ES 250 ALL TRIM LEVELS 2019-2021 ES 350 ALL TRIM LEVELS 2019-2021 NX 300 ALL TRIM LEVELS 2019-2021 RX 350 ALL TRIM LEVELS 2019-2021 RX 450H ALL TRIM LEVELS 2019-2020 TOYOTA 4RUNNER ALL TRIM LEVELS 2019-2020 AVALON ALL TRIM LEVELS 2019-2021 CAMRY ALL TRIM LEVELS 2018-2021 COROLLA ALL TRIM LEVELS 2019 HIGHLANDER ALL TRIM LEVELS 2020-2021 RAV4 ALL TRIM LEVELS 2019-2020 SEQUOIA ALL TRIM LEVELS 2019-2021 SIENNA ALL TRIM LEVELS 2018-2020 TACOMA ALL TRIM LEVELS 2019-2021 TUNDRA ALL TRIM LEVELS 2020-2021 Pac Audio AP4-TY13 (R.2) Manual

Read more less