Add-On ANC Integration Wiring-Harness for Select 2015-2019 Chrysler, Dodge, Jeep and RAM Vehicles
Many late model Chrysler, Jeep, and RAM vehicles are equipped with an Active Noise Canceling (ANC) module. When adding aftermarket amplifiers in these vehicles, this factory ANC module must be bypassed for proper operation of the aftermarket audio equipment and avoid possible damage to the ANC module. The PAC ANC-CH01 provides a plug-and-play solution for bypassing the ANC module in these vehicles, eliminating the need to cut factory wiring.
Quickly and easily bypass the ANC Module.
Keeps ANC module on data-bus for vehicle diagnostics health
Factory fit plug-in connectors
Prevents cutting of factory wires
Applications - confirmed as of 2/1/2023
Year(s)
Make
Model
Trim Level
Additional Info
2017-2019
CHRYSLER
PACIFICA
ALL TRIM LEVELS
—
2019
DODGE
RAM TRUCK
NON-CLASSIC
—
2019
JEEP
CHEROKEE
ALL TRIM LEVELS
—
2015-2016
JEEP
GRAND CHEROKEE
ALL TRIM LEVELS
—
2019
RAM
RAM TRUCK
NON-CLASSIC
—
Pac Audio ANC-CH01 Manual
Add-On OE Amplifier-Integration Wiring-Harness for Select 2021-UP Amplified Chrysler, Dodge, Jeep and RAM Vehicles with uConnect5 Factory Audio Systems
Must be used with AP4-CH41 R.2
Plug and play solution for UConnect5 that allows you to use an AmpPRO with most Chrysler vehicles.
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Provides flat audio output for a solid audio foundation
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, Navigation prompts, and all warning chimes
Plug-n-Play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Also available for fast, easy install: APH-CH01 harness (sold separately)
Select non-amplified vehicles are equipped with an ANC system that requires bypass. Plug-n-Play bypass harness: ANC-CH01
Applications
Must be used with AP4-CH41 R.2
Amplified Vehicles
Compatible with all data-bus controlled amplified systems, no matter the screen size. To identify these systems, look for logos on door speakers, tweeters, dash speakers or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats or Harman Kardon. Some vehicles may not always have branded compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer.
Non-Amplified Vehicles
All other models: Only compatible in vehicles equipped with the 7” or bigger screen. Vehicles equipped with the 5” screen are not compatible.
If you are installing the AmpPRO in a vehicle that is not equipped with a factory amplifier, you must add an amplifier to the vehicle's speakers, as the factory radio will no longer have a 4-channel variable output after it has been re-configured by the AmpPRO. For example, this will not work to add only a subwoofer to a non-amplified vehicle, as the radio will no longer power the cabin speakers properly.
CHRYSLER
PACIFICA
ALL TRIM LEVELS
2021-2022
DODGE
DURANGO
ALL TRIM LEVELS
2021
RAM TRUCK
NON-CLASSIC
2022
JEEP
WRANGLER
ALL TRIM LEVELS
2024
WRANGLER UNLIMITED
ALL TRIM LEVELS
2024
RAM
RAM TRUCK
NON-CLASSIC
2022
No Manual Available
RadioPRO Radio Replacement Interface Harness for Select Mercedes Sprinter and Metris
The RP4.2-MB11 radio replacement interface is your plug-n-play solution to upgrade your factory radio with an aftermarket radio in Mercedes Sprinter or Metris vehicles.
Steering wheel controls, 3.5mm AUX input, USB port and the back-up camera function are all retained with the RP4.2-MB11. By adding on the PAC VS41, you have the ability to add front and blind-spot cameras creating a complete camera system. PAC quality and engineering provides you the most professional installation solution available!
Retains:
Steering wheel controls
3.5mm AUX input
USB port
Back-up camera function
Features:
Includes wired outputs for navigation radio installation
Rear camera activation while in motion
10 Amp ACC 12 volt output
Direct USB updatable
Camera system ready - requires PAC VS41
Includes:
Vehicle specific harness
Interface module
Installation instructions
Applications
Sprinters with the radio delete option need the RP4.2-MB21 harness
2016
MERCEDES-BENZ
METRIS
2013-2018
MERCEDES-BENZ
SPRINTER
Pac Audio RP4.2-MB11 ManualPac Audio RP4.2-MB11 Technical Bulletin
