JL Audio W1-Series 12-Inch 300-Watt Subwoofer Driver, 2-Ohm or 4-Ohm SVC
The 12" W1v3 automotive subwoofer driver by JL Audio is a lightweight 12-inch driver with excellent performance capabilities at a moderate 300-Watts. The design of the chassis allows an average mounting depth with no pole-vent on the back side of the magnet so the rear of the motor structure can be placed directly against an enclosure boundary. This 12" subwoofer can reproduce sub-bass with shocking extension and quality.
The JL Audio 12W1v3-2 and 12W1v3-4 subwoofers are best used with an amplifier in the 75W - 300W range and is optimized to operate in a compact 1.10 cu. ft. (31.5 l) sealed enclosure.
|Continuous Power Handling||300W RMS|
|Recommended Amplifier Power||75W - 300W RMS|
|Nominal Diameter||12.0 in / 300 mm|
|Overall Diameter (A)||12.5 in / 318 mm|
|Mounting Hole Diameter (B)||11.0625 in / 281 mm|
|Bolt Hole Circle Diameter (C)||11.7 in / 297 mm|
|Motor Outer Diameter (D)||5.25 in / 133 mm|
|Mounting Depth (E)||5.41 in / 137 mm|
|Driver Displacement||0.052 cu ft / 1.47 L|
|Net Weight||12.2 lb / 5.5 kg|
|Free Air Resonance (Fs)||26.55 Hz|
|Electrical “Q” (Qes)||0.554|
|Mechanical “Q” (Qms)||8.731|
|Total Speaker “Q” (Qts)||0.521|
|Equivalent Compliance (Vas)||2.544 cu ft / 72.04 L|
|One-Way Linear Excursion (Xmax)*||0.45 in / 11 mm|
|Reference Efficiency (no)||0.23%|
|Efficiency (1 W / 1 m)**||85.9 dB SPL|
|Effective Piston Area (Sd)||81.426 sq in / 0.0525 sq m|
|DC Resistance (Re)||2.210 Ω|
* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.