At this present time our store location is open by appointment only.

JL Audio RBC-1 : Remote Bass Knob Controller

Description

RBC-Series Remote Bass Control Knob for Select JL Amplifiers

The RBC-1 remotely controls the Bass Level of the following JL Audio amplifiers:

  • JD-Series: JD250/1, JD500/1, JD1000/1
  • JX-Series: JX250/1, JX250/1D, JX500/1, JX500/1D, JX1000/1D
  • HX-Series: HX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
  • MHX-Series: MHX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
  • MX-Series: MX300/1, MX500/1 in Low Pass Mode (Note: M-RBC-1 is also available)
  • RD-Series: RD500/1, RD1000/1, RD1500/1, RD900/5

When the RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

The RBC-1 remotely controls the Bass Level of the following JL Audio subwoofer systems:

PowerWedge+: All Models
MicroSub+: All Models

When the RBC-1 is connected to the above subwoofer systems, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

The RBC-1 remotely controls the Bass EQ boost feature of the following JL Audio amplifiers:

  • Slash v3 Series: 600/1v3, 1200/1v3
  • Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
  • Original Slash Series: 500/1, 1000/1, 450/4, 500/5
  • G-Series: All Models
  • A-Series: All Models
  • e-Series: All Models (including marine versions)
  • M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600

When the RBC-1 is connected to the above amplifiers, the on-board "Boost" control of the amplifier is defeated and the RBC-1 becomes the active controller.

The RBC-1 kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.

JL Audio RBC-1 Manual

Product form

RBC-Series Remote Bass Control Knob for Select JL Amplifiers The RBC-1 remotely controls the Bass Level of the following JL... Read more

In-store pickup or installation our shop location

SKU: 98015

1 Available for pickup

$54.99

Description

RBC-Series Remote Bass Control Knob for Select JL Amplifiers

The RBC-1 remotely controls the Bass Level of the following JL Audio amplifiers:

  • JD-Series: JD250/1, JD500/1, JD1000/1
  • JX-Series: JX250/1, JX250/1D, JX500/1, JX500/1D, JX1000/1D
  • HX-Series: HX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
  • MHX-Series: MHX300/1 in Low Pass Mode (Note: M-RBC-1 is also available)
  • MX-Series: MX300/1, MX500/1 in Low Pass Mode (Note: M-RBC-1 is also available)
  • RD-Series: RD500/1, RD1000/1, RD1500/1, RD900/5

When the RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

The RBC-1 remotely controls the Bass Level of the following JL Audio subwoofer systems:

PowerWedge+: All Models
MicroSub+: All Models

When the RBC-1 is connected to the above subwoofer systems, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

The RBC-1 remotely controls the Bass EQ boost feature of the following JL Audio amplifiers:

  • Slash v3 Series: 600/1v3, 1200/1v3
  • Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
  • Original Slash Series: 500/1, 1000/1, 450/4, 500/5
  • G-Series: All Models
  • A-Series: All Models
  • e-Series: All Models (including marine versions)
  • M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600

When the RBC-1 is connected to the above amplifiers, the on-board "Boost" control of the amplifier is defeated and the RBC-1 becomes the active controller.

The RBC-1 kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.

JL Audio RBC-1 Manual

    Recently viewed products

    Login

    Forgot your password?

    Don't have an account yet?
    Create account